Time out while subscribing to nfs:....

Hi all,
I'm currently trying to etablish a cluster, at the moment only to try out, perhaps for some productive use later on.
But I wasn't successful yet and currently don't know what to try out.
My system looks like:
- 1 G5 with all the FinalCut tools installed. This mac is the cluster-boss.
- 1 G5 wich should offer the services for the boss.
I mounted all the disks as the manual said, I created the cluster with the QAdministrator. I also changed the place for the cluster-memory to the main-harddisk.
But now it doesn't work. Each time I try to use the Compressor I get the error that my service-G5 had an "time-out" error while subscribing to my boss-G5.
In the Compressor.log on the service-G5 I get the following:
03/05/2007 14:36:35.323: [263]: Subscribing to shared storage, url = "nfs://master.local/AC9B3E00-9DB9EE22/shared/", host = "media.local", path = "/var/spool/qmaster/AC9B3E00-9DB9EE22/shared"
Why does the Compressor use the path "/var/spool/qmaster/" although I changed it?
Any idea what could be wrong?

Make your life easy - configure the G5 as a quick cluster and be done with it. No need to have your main machine be a controller, it just complicates things in a 2 machine set up.
If you set up your G5 as a Quick Cluster, yu can just send jobs to it from your main machine's compressor...
Chris

Similar Messages

  • Qmaster error: shared storage client timed out while subscribing to...

    Here's my Qmaster setup:
    computer 1: CONTROLLER, no nodes
    - 8TB RAID hooked up via Fiber
    - connected to the GigE network switch via a 6-port bond
    - cluster storage set to a path on the RAID
    computers 2, 3, 4, 5: RENDER NODES
    - each computer has a 2-port bonded connection with the GigE switch
    computer 6: Client, with FCS2 installed.
    - connected with a single GigE link
    I have set up this cluster primarily for command-line renders, and it works great. I submit command-line renders from the client computer, which get distributed and executed on each node. The command line renders specify a source file on the RAID, and a destination path on the RAID. Everything works great.
    I run into trouble when trying to use Compressor with this same setup. The files are on the RAID, and all my computers have an NFS automount that puts it in the /Volumes folder on each computer.
    I set up my Compressor job and submit it to the cluster. It submits sucessfully, and distributes the work. After a few seconds, each node gives me a timeout error:
    "Shared storage client timed out while subscribing to [computer1.local/path to cluster storage]"
    Is this a bandwidth issue? Command line renders work fine, I can render 16 simultaneous Quicktimes to the RAID over NFS. I don't see much network activity on any of the computers when it's trying to start the Compressor render, it's as if it's not even trying to connect.
    If I submit the SAME compressor job to a cluster with nodes ONLY on the controller computer, it renders fine. Clearly the networked nodes are having trouble connecting to the share for some reason.
    Does anybody have any ideas? I have tried almost everything to get this to work. Hooking up each node locally to the RAID is NOT an option unfortunately.

    WELL I DO NOW!
    Thanks. it's taken 6th months and several paid 'professionals' and then you come in here...swinging your minimalist genius. one line. one single line. and its done.
    if you are in london, lets lift a beer or five together.
    thank you sir. thankyou!

  • SSO - session time out while navigating across applications

    Hi,
    Problem statement
    Handling session time out while navigating across applications involving SSO
    Current approach
    Application 1
    1. Create session1.
    2. URL rewrite the sesssion ID1 into the link refering to App2.
    Application 2
    1. Create session2
    2. Get the session Id of App1.
    3. send the session ID of App1 in the header
    4. Invalidate the session2
    Application 1
    Get the ID from request and invoke getSession.
    I'm having a very large session timeout at App1.
    Is there a better approach. Ex: Having global session which is shared across multiple
    webapplications.

    "madhav" <[email protected]> wrote:
    >
    Hi,
    Problem statement
    Handling session time out while navigating across applications involving
    SSO
    Current approach
    Application 1
    1. Create session1.
    2. URL rewrite the sesssion ID1 into the link refering to App2.
    Application 2
    1. Create session2
    2. Get the session Id of App1.
    3. send the session ID of App1 in the header
    4. Invalidate the session2
    Application 1
    Get the ID from request and invoke getSession.
    I'm having a very large session timeout at App1.
    Is there a better approach. Ex: Having global session which is shared
    across multiple
    webapplications.
    I have similiar problems in my system. What do you do if the session 1 times out
    during ongoing operations in App 2 ?
    Thanks
    Kejuan

  • Program times out while looping at internal table with huge records - Needs fine tuning suggestions

    Hi,
    I am trying to execute a report. It times out while looping at vbap internal table. This internal table has 140000  records and does the validation within this loop and geenrates data for the output. Due to this huge volume, the program times out when executed foreground.
    There are no nested loops, so I cannot apply 'Parallel Cursor' here.
    Is there any way I can fine tune the program so that it doesn't timeout? Is it possible to apply 'Parallel Processing' . If yes, how?
    Thanks,
    Pavan

    Hi Pavan ,
                  ->sort your internal table by all primary key for vbap.
                  ->Read a Record from the table (use your condition here)
                  ->if record satisfys your where condition ,get that record index .
                  ->loop the table from the index (without condition) .
                  its like parallel cursor only but for single loop .;-)
                  ->use field symbols ,wherever possible .
               if still dump is coming ,contact your basis team .
    regards,
    Krishna.

  • While Starting oacleAS time out while waiting for a managed process start

    Hello Friends,
    While starting the Oracle Application server, through OPMN command as well as from the services I am getting following error.
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=hydcgwsgess02:6200
    0 of 1 processes started.
    ias-instance id=GenPro.hydcgwsgess02.ind.ge.ad
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    OC4J/home/default_group/
    Error
    --> Process (index=1,uid=461249245,pid=12988)
    time out while waiting for a managed process to start
    Log:
    D:\product\10.1.3\OracleAS_1\opmn\logs\OC4J~home~default_group~1
    ========================================================
    couldn't figure out what is the basic problem...
    Normally when ever I make any changes in Oracle Sensor Edge Server, I used to get this error..
    I have installed the Oracle Apps Server in Windows enviroment...
    I will be very happy if some body can help me resolve the issue...
    Regards
    Nasim

    i got the same error but in my case, I used HTTPDispatcher and found that the URL parameter was invalid, so I changed it in the edgeserver.xml and restart, it's ok for me.
    Edited by: blackwaterpark on Oct 29, 2008 2:21 PM

  • OacleAS time out while waiting for a managed process start

    Hello Friends,
    While starting the Oracle Application server, through OPMN command as well as from the services I am getting following error.
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=hydcgwsgess02:6200
    0 of 1 processes started.
    ias-instance id=GenPro.hydcgwsgess02.ind.ge.ad
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    OC4J/home/default_group/
    Error
    --> Process (index=1,uid=461249245,pid=12988)
    time out while waiting for a managed process to start
    Log:
    D:\product\10.1.3\OracleAS_1\opmn\logs\OC4J~home~default_group~1
    ========================================================
    couldn't figure out what is the basic problem...
    Normally when ever I make any changes in Oracle Sensor Edge Server, I used to get this error..
    I have installed the Oracle Apps Server in Windows enviroment...
    I will be very happy if some body can help me resolve the issue...
    Regards
    Nasim

    Can't tell you what's wrong with just this much of information. Take a look at this log file (as reported in the error message):
    D:\product\10.1.3\OracleAS_1\opmn\logs\OC4J~home~default_group~1
    And also:
    D:\product\10.1.3\OracleAS_1\j2ee\home\log\home_default_group_1\server.log
    These two log files will give you bit more information to help diagnose the issue.
    Thanks
    Shail

  • Time out while waiting for the managed process to start

    Hi All,
    Im getting the below error,when i try to start all managed processes.
    Its taking too much time to execute "opmnctl startall "command and it will give the below error.
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=inkolv1lp01:6201
    0 of 3 processes started.
    ias-instance id=retek101202.inkolv1lp01
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=401608)
    time out while waiting for a managed process to start
    Log:
    /retek/product/app_server/101202/OracleFRM_13/opmn/logs/HTTP_Server~1
    ias-component/process-type/process-set:
    WebCache/WebCache/WebCache
    Error
    --> Process (pid=319598)
    time out while waiting for a managed process to start
    Log:
    /retek/product/app_server/101202/OracleFRM_13/opmn/logs/WebCache~WebCache~1
    ias-component/process-type/process-set:
    WebCache/WebCacheAdmin/WebCacheAdmin
    Error
    --> Process (pid=397550)
    time out while waiting for a managed process to start
    Log:
    /retek/product/app_server/101202/OracleFRM_13/opmn/logs/WebCache~WebCacheAdmin~1
    Im in between some work ,please help to resolve the isue

    Hi,
    I checked the log files and i think it has some errors.I dint get exactly what does it mean.
    Web Cache ($ORACLE_HOME/webcache/logs :
    - event_log contains
    [18/Apr/2012:11:16:26 -0500] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
    [18/Apr/2012:11:16:26 -0500] [notification 9403] [ecid: -] Maximum number of file/socket descriptors set to 900.
    [18/Apr/2012:11:16:26 -0500] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
    [18/Apr/2012:11:16:26 -0500] [notification 9403] [ecid: -] Maximum number of file/socket descriptors set to 900.
    [18/Apr/2012:11:16:31 -0500] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
    [18/Apr/2012:11:16:31 -0500] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
    [18/Apr/2012:11:17:01 -0500] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oret13/ewallet.p12 does not exist.
    [18/Apr/2012:11:17:01 -0500] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oret13/ewallet.der does not exist.
    [18/Apr/2012:11:17:01 -0500] [warning 11919] [ecid: -] The SSL wallet autologin file /etc/ORACLE/WALLETS/oret13/cwallet.sso does not exist. Wallet does not appear to be
    autologin wallet.
    [18/Apr/2012:11:17:01 -0500] [warning 11921] [ecid: -] The origin server wallet did not open. Operating without wallet for backend. Only Diffie-Hellman anonymous connec
    tions supported to origin servers.
    [18/Apr/2012:11:17:01 -0500] [warning 11922] [ecid: -] Origin Server Wallet wallet fails to open at location /etc/ORACLE/WALLETS/oret13, NZE-28759, as user oret13
    [18/Apr/2012:11:17:01 -0500] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oret13/ewallet.p12 does not exist.
    [18/Apr/2012:11:17:01 -0500] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oret13/ewallet.der does not exist.
    [18/Apr/2012:11:17:01 -0500] [warning 11919] [ecid: -] The SSL wallet autologin file /etc/ORACLE/WALLETS/oret13/cwallet.sso does not exist. Wallet does not appear to be
    autologin wallet.
    2)Oracle HTTP Server ($ORACLE_HOME/Apache/Apache/logs has these details
    access_log.1307016000 mod_oc4j.753776.shm.sem
    access_log.1307059200 mod_oc4j.815188.shm.mem
    access_log.1307102400 mod_oc4j.815188.shm.sem
    access_log.1307145600 mod_oc4j.843922.shm.mem
    access_log.1307361600 mod_oc4j.843922.shm.sem
    access_log.1307404800 mod_oc4j.872618.shm.mem
    access_log.1307448000 mod_oc4j.872618.shm.sem
    access_log.1307491200 mod_oc4j.872692.shm.mem
    access_log.1307534400 mod_oc4j.872692.shm.sem
    access_log.1307577600 oracle

  • FSCT tool gives a Controller time out while Run Client command

    Hello,
    I am getting a Controller time out error while run client command. I turned on network discovery and start all the services but stil see the time out error;
    DNS Client
    Functional Discovery Resource Publication
    UPnP Device Host
    SSDP Discovery
    I would appreciate prompt assistance on this.
    Thanks,
    Praveen

    Hi,
    Please disable the firewall on my clients, server and turn on "Network discovery" and "File and printer sharing" settings to check the results.
    For more detailed information, please refer to the thread below:
    SCT tool gives a Controller time out while Run Client command
    http://social.technet.microsoft.com/Forums/en-US/a48ae67b-9a9d-4509-9c9c-5d3a468f2cad/fsct-tool-gives-a-controller-time-out-while-run-client-command?forum=fsct
    Best Regards,
    Mandy 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • OVM services time out while starting

    OS: Oracle Linux 6.1 x64
    OVM manager services fail to startup with the following message:
    [root@pluto ~]# service ovmm restart
    Stopping Oracle VM Manager                                 [  OK  ]
    Starting Oracle VM Manager Time out...
    Contents of the AdminServer.log are as follows (Last few lines of error):
    ####<Sep 16, 2013 1:52:19 PM WST> <Info> <Common> <pluto.int.lansen.com.au> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Def
    ault (self-tuning)'> <<WLS Kernel>> <> <> <1379310739976> <WL-000628> <Created "1" resources for pool "OVMDS", out of which "0" are available and "1"
    are unavailable.>
    ####<Sep 16, 2013 1:58:18 PM WST> <Warning> <JDBC> <pluto.int.lansen.com.au> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.De
    fault (self-tuning)'> <<WLS Kernel>> <> <> <1379311098971> <WL-001129> <Received exception while creating connection for pool "OVMDS": IO Error: The N
    etwork Adapter could not establish the connection>
    ####<Sep 16, 2013 1:58:18 PM WST> <Info> <JDBC> <pluto.int.lansen.com.au> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Defau
    lt (self-tuning)'> <<WLS Kernel>> <> <> <1379311098971> <WL-001156> <Stack trace associated with message 001129 follows:
    java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection
            at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:443)
            at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:670)
            at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:230)
            at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
            at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)
            at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:404)
            at oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:694)
            at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:267)
            at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:134)
            at weblogic.jdbc.common.internal.XAConnectionEnvFactory.makeConnection(XAConnectionEnvFactory.java:477)
            at weblogic.jdbc.common.internal.XAConnectionEnvFactory.createResource(XAConnectionEnvFactory.java:177)
            at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1249)
            at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1166)
            at weblogic.common.resourcepool.ResourcePoolImpl.recreateDeadResources(ResourcePoolImpl.java:2087)
            at weblogic.common.resourcepool.ResourcePoolImpl.access$1900(ResourcePoolImpl.java:41)
            at weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePoolImpl.java:2706)
            at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
            at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused By: oracle.net.ns.NetException: The Network Adapter could not establish the connection
            at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:381)
            at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:426)
            at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:710)
            at oracle.net.ns.NSProtocol.connect(NSProtocol.java:256)
            at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1176)
            at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:318)
            at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:670)
            at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:230)
            at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
            at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)
            at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:404)
            at oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:694)
            at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:267)
            at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:134)
            at weblogic.jdbc.common.internal.XAConnectionEnvFactory.makeConnection(XAConnectionEnvFactory.java:477)
            at weblogic.jdbc.common.internal.XAConnectionEnvFactory.createResource(XAConnectionEnvFactory.java:177)
            at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1249)
            at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1166)
            at weblogic.common.resourcepool.ResourcePoolImpl.recreateDeadResources(ResourcePoolImpl.java:2087)
            at weblogic.common.resourcepool.ResourcePoolImpl.access$1900(ResourcePoolImpl.java:41)
            at weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePoolImpl.java:2706)
            at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
            at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused By: java.net.ConnectException: Connection refused
            at java.net.PlainSocketImpl.socketConnect(Native Method)
            at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
            at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
            at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
            at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
            at java.net.Socket.connect(Socket.java:529)
            at oracle.net.nt.MetricsEnabledSocket.connect(TcpNTAdapter.java:619)
            at oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:164)
            at oracle.net.nt.ConnOption.connect(ConnOption.java:134)
            at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:357)
            at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:426)
            at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:710)
            at oracle.net.ns.NSProtocol.connect(NSProtocol.java:256)
            at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1176)
            at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:318)
            at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:670)
            at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:230)
            at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
            at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)
            at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:404)
            at oracle.jdbc.xa.client.OracleXADataSource.getPooledConnection(OracleXADataSource.java:694)
            at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:267)
            at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:134)
            at weblogic.jdbc.common.internal.XAConnectionEnvFactory.makeConnection(XAConnectionEnvFactory.java:477)
            at weblogic.jdbc.common.internal.XAConnectionEnvFactory.createResource(XAConnectionEnvFactory.java:177)
            at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1249)
            at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1166)
            at weblogic.common.resourcepool.ResourcePoolImpl.recreateDeadResources(ResourcePoolImpl.java:2087)
            at weblogic.common.resourcepool.ResourcePoolImpl.access$1900(ResourcePoolImpl.java:41)
            at weblogic.common.resourcepool.ResourcePoolImpl$ResourcePoolMaintanenceTask.timerExpired(ResourcePoolImpl.java:2706)
            at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
            at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    >
    ####<Sep 16, 2013 1:58:19 PM WST> <Info> <Common> <pluto.int.lansen.com.au> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Def
    ault (self-tuning)'> <<WLS Kernel>> <> <> <1379311099973> <WL-000628> <Created "1" resources for pool "OVMDS", out of which "0" are available and "1"
    are unavailable.>
    Please advise. Thanks

    Hi,
    is Oracle VM Manager istalled like VM in VirtualBox or in physical server ?
    you have a problem (error) with the Network adapter
    ault (self-tuning)'> <<WLS Kernel>> <> <> <1379311098971> <WL-001129> <Received exception while creating connection for pool "OVMDS": IO Error: The Network Adapter could not establish the connection>
    ####<Sep 16, 2013 1:58:18 PM WST> <Info> <JDBC> <pluto.int.lansen.com.au> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Defau
    lt (self-tuning)'> <<WLS Kernel>> <> <> <1379311098971> <WL-001156> <Stack trace associated with message 001129 follows:
    java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection
    and
    Caused By: java.net.ConnectException: Connection refused
    verify with your network configuration
    lokk at this URL, if you are using VirtualBox
    I hope this can help you
    Best Regards

  • HT4628 my powerbook g4 os x 10.5.8 leopard is showing-Connection time out while connecting to the wifi.however it showing all available wifi connections around but not connecting it..however ethernet is working

    Problem while connecting with Wi-Fi,
    When i am connecting my powerbook g4 leopard  to any Wi-fi connection it showing -Connection time out, however Ethernet is working .I have updated all softwares but still same problem.

    It's possible that either the internal AirPort Extreme card or the antenna is faulty or has failed.
    One last thing to try before going with another Wi-Fi solutions is to the following:
    Try the following, in order, until (hopefully) resolved:
    1a. Delete Preferred Network(s)
    System Preferences > Network > AirPort > Advanced > AirPort tab
    Under "Preferred Networks," delete the network(s) you regularly use from the list.
    1b. Delete AirPort Keychain Entries
    Launch the "Keychain Access" application located in Applications/Utilties.
    Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    1c. Add Preferred Network(s)
    System Preferences > Network > AirPort > Advanced > AirPort tab
    Add the preferred network(s) using the "+" button.
    Restart or log out then back in.
    2. Move System Configuration Files
    (Note: You will have to reestablish your network connections settings.)
    Go to /Library/Preferences
    Move the SystemConfiguration folder to the desktop.
    Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)
    3. Run the Disk Utility to repair Disk Permissions.
    Restart or log out then back in.
    4. Turn off the Mac OS X Firewall
    System Preferences > Sharing > Firewall
    Click the "Stop" button.
    5. Create a New User Account
    System Preferences > Accounts
    Click "+" to add a new account
    Log off, then log back on with the new user account.
    Try connecting with the AirPort.
    If none of these help resolve the issue, you may want to consider getting a USB wireless adapter to replace both the internal card and antenna. One such vendor of these adapters is Other World Computing (OWC).

  • Time out while login in any IC role

    Hi,
    I need a help with a strange issue that occurred in my system.
    Yesterday I was accessing it (a business role copy from the ICAGENT) that was working without any problem. I am in release 7.0.
    I was making some screen configurations and now the business role doesn't upload... I get a time out. On the Internet explorer I see a yellow icon on the bottoom and if I double click to see details I get the message:
    "document" is null or is not an object on:
    http://<server>:<port>/sap(====)/bc/bsp/sap/crmcmp_ic_frame/header_jscripts.js
    Any ideas???
    Regards.
    Susana Messias

    Just to update:
    I found that the problem is related with our initial page that is called in our IC Profiles: ID: BPIDENT
    Any idea what can be cause this error?!? The standard work center for Account identification stopped working here.
    Thanks.

  • Time out while reading single record from CRMD_ORDERADM_H table on OBJECTID

    Hi,
    This is the problem i am facing in CRMD_ORDERADM_H.
    if i search for a single record in CRMD_ORDERADM_H Table using SE11 on OBJECT_ID field, it is giving me Time out error.
    CRMD_ORDERADM_H db size would be > 1 Billion records.
    It is having a Secondary Standard index on OBJECT_ID.
    If i search for single record with OBJECT_ID  and PROCESS_TYPE i am able to get the result within seconds.
    But if i take some range in OBJECT_ID and single value in PROCESS_TYPE then i am getting Time out erro.
    we have index (custom) on OBJECT_ID and PROCESS_TYPE combination.
    What would be the cause?
    Thanks in Advance,
    -Kishore

    Hello,
    there is a special table for reading records from orders: CRMD_ORDER_INDEX.
    Regards, R

  • Socket Time out while running Flex Profiler .

    Hi ,
    I have  develped a sample Flex Application , whne i am trying to run the Profile Application with in the Flex Builder ,
    I am getting Socket Time Out .
    Can anybody please let me know how to resolve this exception .
    Thanks in advance .

    Reboot and try again.  Sometimes some player instance in a browser or IM
    hangs up the socket.

  • IPhone 1.1.3, times out while syncing on windows

    I've had an iPhone for a day now and everything was fine. Now when I transfer files or do anything, in any USB port on my PC even on my USB 2.0 PCI card, it's painfully slow and then times out. No error number, just a message saying it timed out. I've tried different cables, docks, restoring the iPhone, reseting the iPhone, restarting Windows XP, etc, etc, pretty much anything I could think of. Uninstalling, repairing iTunes...
    this happend all of the sudden out of nowhere and it's driving me crazy.

    ah yes, isn't it wonderful. it just disconnected about 700 songs into the transfer.
    the iphone restarted out of bloody nowhere.
    at this point i'm about about to take my music and put it on a mac mini we have in the house that isnt mine, just to sync my stupid phone :/

  • Getting Connection Time out while connecting and with tnsping

    Hello Experts,
    I am new to Oracle world, so please go easy on me.
    I installed Oracle 11 XE on Centos 6.4 VM. followed the official installation procedure and database was installed without any errors.
    I am able to login to database through sqlplus and able to run sql queries.
    Problem comes when i am trying to connect from sql developer or external application. i get Connection Time out error.
    Below are the tnsnames.ora and listener.ora file content
    # tnsnames.ora Network Configuration File:
    XE =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = XE)
    EXTPROC_CONNECTION_DATA =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
        (CONNECT_DATA =
          (SID = PLSExtProc)
          (PRESENTATION = RO)
    # listener.ora Network Configuration File:
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = PLSExtProc)
          (ORACLE_HOME = /u01/app/oracle/product/11.2.0/xe)
          (PROGRAM = extproc)
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
          (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521))
    DEFAULT_SERVICE_LISTENER = (XE)
    lsnrctl stat shows service stats as UNKNOWN and tnsping also fails
    bash-4.1$ lsnrctl stat
    LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 11-JUN-2013 02:00:48
    Copyright (c) 1991, 2011, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for Linux: Version 11.2.0.2.0 - Production
    Start Date                10-JUN-2013 19:39:03
    Uptime                    0 days 6 hr. 21 min. 45 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Default Service           XE
    Listener Parameter File   /u01/app/oracle/product/11.2.0/xe/network/admin/listener.ora
    Listener Log File         /u01/app/oracle/diag/tnslsnr/sagbase/listener/alert/log.xml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=basevm)(PORT=1521)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
      Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    bash-4.1$ tnsping xe
    TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 11-JUN-2013 02:01:16
    Copyright (c) 1997, 2011, Oracle.  All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = basevm)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
    TNS-12535: TNS:operation timed out
    I am stuck and don't know where else to check.
    Could you guys please help me out here?
    Thanks.

    That tnsping error indicates several possible problems, most related to the setup for the client. Or network setup on the database server host.
    Connecting to a database using sqlnet requires three things, the database host, the listener port, and the ORACLE_SID or instance SERVICE_NAME.
    The tnsping utility is only concerned with the first two items, host and port. It will not perform an actual connection, and will not verify the tnsalias ORACLE_SID or SERVICE_NAME values.
    An "OK" result from tnsping verifies that the specified host has a listener running at the specified port and it is servicing connections.
    Since you're not getting an "OK" from tnsping, could be something is blocking the connection (i.e. firewall), the host= specification is not correct, or the port= spec is not correct. Note that host= must either be a valid and correct hostname, or a an IPv4 address. If IPv6 is in the mix, only the correct hostname will work. A hostname that resolves correctly.
    Look at your network interface setup on the host, find its IP address, make sure the IP will `ping`, and try a new sqlnet.ora entry with the IPv4 address.
    ifconfig -a
    <interface>: flags=...
    inet n.n.n.n
    # in sqlnet.ora:
    xe2 = ... host=n.n.n.n ...
    tnsping xe2
    ... ok? ...

Maybe you are looking for

  • Sleep and Hibernate does not work after BIOS update X1 Carbon 20A8

    As subject title, did a recent Lenovo "System Update" on BIOS and other drivers, and since then sleep and hibernate no longer works, when i close the lid, it turns on by itself after 2 seconds. When i select Sleep or Hibernate in Windows 8.1 with lid

  • Send SMS text message to more than one person at a time

    How do I do that?  Do I need additional software?

  • AD/OID import mapping not working

    Can you help debug my AD-OID mapping issue? I'm getting the below messages from ActiveChgImp.trc Sleeping for 5secs LDAP URL : (:0 cn=akloas1,ou="Service Accounts",OU=Users,OU=Managed-Objects,dc=corrections,dc=govt,dc=nz Specifying binary attributes:

  • ITunes freezes MacBook Pro after Mountain Lion reinstall

    A bad sector on my Macbook Pro (synched to my iMac) occurred within days of my first Mountain Lion update. I reinstalled Mountain lion, and used migration assistant with time machine to reinstall everything else. It was working for 8 hours when I dec

  • Email about BT Business Broadband.

    I have received an email saying: Dear Mrs ******( it states my name) Thanks for staying with us and welcome back to BT Business Broadband.  We'd like to take this opportunity to remind you of the service, features and value you can expect to receive