Time overlapping of data record 3 with 4

Hi all
While Running the DTP for loading master data from PSA to INFO OBJECT i am getting this error "Time overlapping of data record 3 with 4 ".
can anyone help me for resolving this
thanks
Preethi.....

The datefrom/validfrom and dateto/validto of those two records have some overlapping period. Browse the PSA table to see the date from and dateto values.
Analyze why the extractor is bringing records with overlapping periods. If its a custom datasource make sure the view/functionmodule is generating proper non-overlapping records using RSA3

Similar Messages

Time overlapping of data record

Hi All,
I am facing the problem Time overlapping of data record while loading Infopackage.
Error: Record 46 :YGTMARKET : Time overlapping of data record 46 with 47 : '['99991231'/'19000101'] '[to/fr
whats the remedy?
Thanks
sonal

Hi,
Please look at /BIC/TYGTMARKET table in SE16.
Find the record with a key = 47 and notice what values have Date_from and Date_to fields. The interval they determine, overlap with 01.01.1900 - 31.12.9999.
You need to supply correct date_to & date_from values.
Assign points if helpful

Time overlapping of data record..very urgent

Hi All,
while loading time dependent data(texts..0HRPOSITION), i am geeting the following error....
Processing (data packet): Errors occurred
   Data Package 1 ( 7418 Records ) : Errors occurred
          Update ( 0 new / 0 changed ) : Errors occurred
               Data records for package 1 selected in PSA - 2 error(s)
               Record 7415 :0HRPOSITION : Time overlapping of data record 7415 with 7416 : '['20100924'/'20070618'] " .
               Record 7416 :0HRPOSITION : Time overlapping of data record 7415 with 7416 : '['20100924'/'20070618'] ....
Could anyone let me know how to rectify this error and reload the IP..I am workning on production system.....its very urgent
Thanks in advance.
Manjula

Hi Manjula
!)0HRposition infobject and check what is the time previously for that record..
2)Edit the PSA for the 7415 or 7416 and change the vlaue to the previous record time which u found in the infoobject
3) i think ur doing a full load. so better edit the PSA and repload the data from PSA
Regards
AK

Error:Time overlapping of data records.

when I was filling COSTCENTER Info object with master data from the SAP R/3 source system , and I have given certain time interval in update tab , I got an error in PSA stating that ' Time overlapping of datarecord 'x' with 'y'.
can you any one help me .

Hi Sandya,
In the error message it would be showing the table name, the records which failed with error and values in error.
So, please look at table in SE16. Find the record with a key as same as the value which you got in error and notice what values have Date_from and Date_to fields. The interval they determine, overlap with the values in error.
If you would have given the error string I wud have been in a better situation to take it as reference and expalin it to you...
Refer:
Master data load failure
Time overlapping of data record
hope it helps...
Cheers,
Habeeb

Overlapping time intervals of data record 33 with 34 ,46 with 47 etc..

Hi Freinds,
when i was trying to load master data getting the below error message in DTP/Info package.
The time interval ['20070920 '/' 20070702] & (from/to) for the data records 33 and 34 & overlaps in charecterstics 0HRPOSITION &.
Can you please explain me how to correct this error.
Your input 'll be much appreciated and points 'll be assgin.
Regards,
Syam

Hi Gurus,
Please see the below error message which i got when i was trying to load master data attributes to HR infoobject.
Diagnosis:
    The time interval ['20070920'/'20070702'] & (from/to) for the data
    records 33 & and 34 & overlaps in characteristic 0HRPOSITION &.
System Response
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Procedure for System Administration
Out 1000 records getting error for 12 records.
I could n't find in infopackage that Ingnore Duplicate Records and that info object is time dependent.
Please put some inputs to solve this issue.
Points 'll awarded for helpul answers.
Thnaks,
Syam

Overlapping Time intervals of data record 33 with 44,46 with 47 so on...

Hi Friends,
when i was trying to load the master data attributes to info object getting the bellow error message:
Diagnosis
    The time interval ['20070920'/'20070702'] & (from/to) for the data
    records 33 & and 34 & overlaps in characteristic 0HRPOSITION &.
System Response
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Procedure for System Administration
Geeting error for 12 records out of 1200.
Already my info object is time dependent master data.
to ignore the dulpicate records i couldn't find any option in that info package..
please let me know the error ...
points 'll be assigned for helpul answers..
Regards,
Syam

Hi ,
You can go for PSA maintainance   or
If u r using DTP then in DTP Ececution screen under Update tab there is a check box
Handel the duplicate records
click it and activate the DTP and Execute.
Thanks
RK

Error 4 in the update: Time Overlapping of data records

Hi Experts,
I am loading 0EQUIPMENT master data load, after scheduling i'm getting Time overlapping of the data records. can anybody give the inputs for this...
Regards
SK

Hi,
Take a look at: Master data load failure
Also maybe OSS note 314964 will help.
Hope it helps,
Gili

DTP got failes due to overlapping time intervals of data records

Hi,
Can any one suggest me how to solve this issue....
the problem is when iam loding Master Data DTP, the DTP is showing error message that Overlapping time intervals of data records.I mean the start data and end data for these error records are same.
Eg: For some employees the start date and end data are same.
Please advice , what can be done...
Immediate reply is realy appreciated.

Hi Shaik,
By checking this check box ...
You won't get any duplicate records, before loading the data DTP removes the duplicate records and loads into Master data.
So, you can avoid the duplicate records by checking this.
Regards,
Ravi Kanth

Changing time dependent master data records

Hello All,
I have a time dependent master data infoobject that has 39 million entries.
Now we decided that we no longer need it time dependent.
Hence we want to maintain constant value ( 01.01.1000 to 31.12.9999) going forward.(as changing the object's time dependency will have huge impact)
But for the historical data, we want to fix this and maintain only one record per value which will be the last record.
Can you please provide inputs on how this can be achieved as i tried various combinations of load( load to a copy object taking only last record, changing its valid to to 01.01.1000 and loading back) and its not working.
e.g the value XXX has following entries currently:
Object
Valid To
Valid From
XXX
15.06.2007
01.01.1000
XXX
19.09.2007
16.06.2007
XXX
28.01.2008
20.09.2007
XXX
30.03.2009
29.01.2008
XXX
31.03.2009
31.03.2009
XXX
15.04.2009
01.04.2009
XXX
31.12.9999
16.04.2009
we need to get to the below format:
Object
Valid To
Valid From
XXX
31.12.9999
01.01.1000

Hi Dhanya,
The approach u did (load to a copy object taking only last record, changing its valid to to 01.01.1000 and loading back) will not work on Master data because it is not a DSO, with the Proper keys in place, to overwrite all the previously existing data records. This approach will only work if the infoobject is not time dependent and in that case the question u posed will not arise at all .
SOLUTION:
One thing is Inevitable as Prashanth has prescribed, u have to delete the transaction data first at all the places, where and all it was used.
Then just delete the entire master data from the info object and just do a FULL DTP load from the underlying datasource putting a FILTER like "VALID_TO = 31.12.9999" so that only the last record of a particular Value will be loaded. (No need to do a full load from the source because even in the source it might had been the same old Values and might not have been revamped.)
Even for further delta's, it will be safer to maintain this filter at the DTP level if u r not sure of the constant value maintenance at the source.
Thanks & Regards
Sasidhar

Time overlaping between the two records

Hi experts,
I'm xtracting data from R/3 to BW. when the load was triggered i'm getting a error message that time overlaping between the records.
Can any one tell , what action should be taken to solve this issue. Is there any setting in BW side to handle time overlaping error.
Regards
Kumar

Hi Kumar,
Try replicating the datasources in BW.
Regards,
R.Ravi

How to avoid 'duplicate data record' error message when loading master data

Dear Experts
We have a custom extractor on table CSKS called ZCOSTCENTER_ATTR. The settings of this datasource are the same as the settings of 0COSTCENTER_ATTR. The problem is that when loading to BW it seems that validity (DATEFROM and DATETO) is not taken into account. If there is a cost center with several entries having different validity, I get this duplicate data record error. There is no error when loading 0COSTCENTER_ATTR.
Enhancing 0COSTCENTER_ATTR to have one datasource instead of two is not an option.
I know that you can set ignore duplicates in the infopackage, but that is not a nice solution. 0COSTCENTER_ATTR can run without this!
Is there a trick you know to tell the system that the date fields are also part of the key??
Thank you for your help
Peter

Alessandro - ZCOSTCENTER_ATTR is loading 0COSTCENTER, just like 0COSTCENTER_ATTR.
Siggi - I don't have the error message described in the note.
"There are duplicates of the data record 2 & with the key 'NO010000122077 &' for characteristic 0COSTCENTER &."
In PSA the records are marked red with the same message (MSG no 191).
As you see the key does not contain the date when the record is valid. How do I add it? How is it working for 0COSTCENTER_ATTR with the same records? Is it done on the R/3 or on the BW side?
Thanks
Peter

Discrete time range over date range (using CR X1)

Post Author: sjr
CA Forum: Formula
Can anyone show me how to select data over a discrete time range i.e. 6 p.m. till 11 p.m. per day, over a period of a month ?
Using the data time parameter gives me data from 6p.m. on startdate right through till 11p.m. on endate.

Here's a more detailed description...
Create two formula fields to split the date and time from the data records (ds prefixed):
dsDate
dsTime
Create two formula fields to split the date and time from the parameter fields (pm prefixed):
pmStartDate
pmStartTime
pmStartDate
pmStartTime
Use your new formula fields in the record selector. Get to this off the Report menu button (in CR 2008):
Report | Select Expert... | Record.
You can pick the formula fields in the Forumula Editor to create something like:
({@dsDate} > {@pmStartDate} and
{@dsDate} < {@pmEndDate}) and
({@dsTime} > {@pmStartTime} and
{@dsTime} < {@pmEndTime)
Tim

SQL Developer Data Modeler - integration with subversion

I just discovered the release of SQL Developer Data modeler, and found this to be very interesting.
We are still using Oracle Designer for database design, but we are looking for a replacement (for several reasons).
My question is quite simple:
Given that the modeler uses a filebased repository, and also given that we have several developers potentially working on a data-model at the same time, how does Data Modeler integrate with subversion for source control etc.?
Can the repository itself be under source control, and checked in/out directly from Data Modeler?
Or will only the output files be candidates for version/source control?
Let me admit right away that I have not read much of the data modeler docs, and I have also not downloaded/installed it (yet), but does anyone have pointers to docs on this , or general input/knowledge around it.
On a side note, I must say that it puzzles me that a company like Oracle, that delivers one of the best databases doesn't use its database engine to host the repository, but instead chooses to go for files (I assume xml) "scattered all over the place"....
Well, I guess they a have a reason for it..
Anyway:
Sql Developer Data Modeler and Subversion anyone?
Jens

Hi Jens,
It's early days and the initial implementation is indeed file based. Though I'd say not xml files "all over the place", but in ordered folders. Yes, as a database company it does make sense that we'd have a repository for managing and versioning metadata. However the tool supports Oracle and other databases and many companies use open source version control tools, such as Subversion and so anyone using the Data Modeler today can use it with Subversion regardless of the database they are designing for.
We do plan to have a repository, but in the 6+ months of the early adopter program found that many of the early adopters were happy to place the files under source code control using Subversion and in so doing also managed the multi-user development.
Integrated Subversion support is planned for a future release.
Sue

Data record with time interval error

Hi,
I have come across the following error.
Data record with Time interval error and data is getting loaded into data target and no PSA in between.
thanks
kris

Hi Kris,
Could you please explain your problem little bit more. I mean what is source and target, or you using IP or DTP.
goto the details in monitor tab, you will come to know to which record yo uhave error.
If you are running IP, it is recommended to keep PSA.
Regards,
Venkatesh

Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
    "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
    "Unable to retrieve all data."
    The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations   -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

Time overlapping of data record 3 with 4

Similar Messages

Maybe you are looking for