Time pattern to allow user breakthrough URLFilter over IOS content filtering
hi
i have a client did request me to create such thing for them over IOS content filtering + Trend Micro based subscrition (till this level i'm pretty not sure it is feasible or what)
scenario would be:
like group 1 of users are the martketing subnet, then setting the time from 0800 hour to 1700 hour are prohibited to access any of the block blackilist site (either from local and/or trend micro reputation / category blacklist URL)
is there any way round i can enable the router to recognize the time then let user to gain access after 1700 hour?
Can TCL do this? any other way round for this
thank you
Noel
Hi Carlos,
I am having the same problem. I have seen a few diffenent configuration examples and they all show adding the "parameter type urlfpolicy trend parm-map-name" command but it doesn't exist, at least in 15.2(3)T1 and I see it listed in the the IOS documentation for 15.2. Maybe they forgot it :-)
I guess I will open a TAC case as I do not want to downgrade...
I will keep you posted if I find the answer.
Regards,
Troy
Similar Messages
-
Why does Apple not allow users to choose an iOS?
Why are they forced to use an iOS that does not work well with their phone/devices? I have a 32gb 3GS, and it's still running 3.1.3. I never upgraded because I never read anything good about them. Now, there are some apps I'd like to use, but I am required to have 4.x to run them, so I can't download them. I know there's a version of 4.x that is "better" than the others, so I'd consider that one (if I could find where I read it, again, to "pick it"), but, through Apple's infinite (lack of) wisdom, if I upgrade, I'm pigeon-holed into 5.0.1, which apparently is nothing but bad news for a 3GS-er.
So basically, can anyone give a reasonable, logical explanation as to why Apple seems to think that everyone should have the latest (and not greatest) version of the iOS?Because given the nature of iOS, security, and 3rd party developers, it would be a nightmare to try to provide support for the multiple versions of iOS that could be running at any given time. Also, if an upgrade included security fixes (which many have) and Apple allowed people to go backwards by providing the software on their site they open themselves up to liability for any breach that might ensue on the users iPhone.
As you have determined you do not have to upgrade, although you tend to get nagged about it. And developers will move on and use new APIs in newer versions of the OS that will render you unable to use them. This happens on computers too. But given the closed nature of iOS this is Apple's best option. And if you think iOS is closed you should look at Windows Mobile 7. -
Design tools to allow users to rank and review?
I would like to create a site that allows users to rank and review content. For example, a photo might receive a 3 start rating by one reviewer and a 5 star rating by another, both of whom will be able to comment on the photo. Will I be able to accomplish this using iWeb? If so, is it difficult? I'm not a programmer (yet).
http://www.haloscan.com/
-
Page text appears very small on laptop while utilizing full resolution on a dell XPS laptop. Zoomed-in a notch or two it looks good. Readable without squinting. But browse to a different page, and its tiny all over again. Firefox, being the best browser on the web, should think about allowing users to maintain their zoom value when going to a different page, instead of going back to default. Just an idea... I know there's alot of laptops out there and if it's hard for me to read with good eyes, I'm sure it's hard for others.
The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/ -
I understand the charter on this is to "check-in" once every time the program is turned on, and then once every 6 hours after that, or, once every 24 hours presumably. But the phone-home-effect is over-stepping these basic parameters. If a user turns their browser off and then on, Firefox is still obligated to "check-in" even if it just checked in 3 minutes prior. If the coding is not pre-designed to overstep, or act excessively in a redundant focus, the instance of once every six hours or once every 24 hours, is still overmuch if a user has been doing this (non-voluntarily-participating) for 9 months or longer.
== This happened ==
Every time Firefox opened
== This started when Firefox took up the initiative of "improving service. to end users" or similar idea, making the web safer for novice users, etcetera.Opening question was truncated. Should read: "Firefox users cannot presently exercise choice, to opt-in or out of "data collected for improving services." As a result, Firefox is constantly dialing home, sometimes four times a day or more up to 48 times a day. There is some over-stepping and redundancy here. It would seem the practice of "improving service" has been accomplished with as much information as Mozilla has gathered in the last 6-18 months about its users habits. '''Isnt it about time to give users the option to opt out of that now that most the heavy liftiing has been accomplished?'''"
-
Does Captivate 8 have any facility to allow users to see a word definition upon clicking/hovering over text in a Captivate project?
You can have both clicking and hovering. But you need to add the definition manually for every such word.
Sreekanth -
Allow user to take survey multiple times, but do not allow the same response
I have a requirement to allow users to take a survey multiple times, however, the answers to the survey can not be the same.
So when a user takes the survey the first time they can take a second and a third but not have the same response.
Using SharePoint 2007
Thanks in advanceAs you denied yourself the Administration rights you cannot get it back in this account of course. Look to the right on this page and check the threads in "More like this".
-
Allow user defined values during run time
Hi ,
I have created a VI wherein I have 3 inputs as enums, I also want to give the user the capability to enter runtime values which are not present in the drop down for the enum , is it possible ? I see an option in the propeties of the enums as "allow user to enter undefined values during runtime" , will this serve the same purpose as I am looking for or is it something different ?
Please see the attached snapshot for the option I am referring to .
Thanks
Attachments:
Allow_undefined_values_during_runtime.PNG 25 KBManreet wrote:
Hi ,
I have created a VI wherein I have 3 inputs as enums, I also want to give the user the capability to enter runtime values which are not present in the drop down for the enum , is it possible ? I see an option in the propeties of the enums as "allow user to enter undefined values during runtime" , will this serve the same purpose as I am looking for or is it something different ?
Please see the attached snapshot for the option I am referring to .
Thanks
What you see is a disabled option in the items editor. The items editor is common between Rings Comboboxs and enums. I don't know why the gurus and R&D decided to disable and grey the checkbox rather than hide the darn thing. Lucky for us its not something that customers see just developers. At least we have the ability to ask about what that is if we don't know.
Jeff -
Help! For some reason i-tunes 12 wont allow users to re-download past purchases all at once like it used to. Is there a way around this? It will only allow you to download what it calls "Recent Purchases" which in my case only would allow 250 items. I know i have at least 700 tracks if not substantially more possibly over 2000 tracks but I can't be sure. I don't know how to find that information, I've looked in itunes under the my account past purchases but id doesn't tell you how many total songs you have purchased or any relevant details. It only shows you small chunks of receipts by date but no total tracks purchased in an easy to view snapshot that I could find. The current support page says that if you have more then 2000 songs the "ALL SONGS" tab now listed above the left pan with all your purchased artists, will change to "Recent Purchases". IF apple changed this on purpose to stop user from downloading there entire library to cut down on bandwidth they have really upset me this time. At present the only way I can download all past purchases is by selecting each artist listed in the left pan one by one selecting the "Download ALL" button at the bottom right corner of the page at which point I have to input my apple password each time, which really slows things down. I have hundreds of artists and if this is the only way for customers to re-download there entire library this is ridiculous and really unnecessary to put customers through this kind hassle just to re-download all there past purchases when the whole idea of i-cloud is to make downloading and using your music simple, quick, and convenient on multiple devices. I know the old saying "your responsible for backing up your data" yeah I know that and I've been doing that for years when no one really should ever have had too. There is no reason a service that sells music digitally should not allow customers to be able to re download content purchased on there service regardless of the fact that people should just back up anyway as an extra precaution. Well sometimes backups fail like in my case and I have to re-download. No wonder paid subscription plans are so popular. You don't have to deal with any of these issues. I can only hope this is some kind of oversight by apple and will be fixed soon. Can anyone offer a quicker solution or any information about this issue? I would greatly appreciate any helpful assistance.
Again this is for Windwos 8.1 x64 with Itunes 12.0.1.26After spending way too much time dealing with this issue myself, I discovered that you can:
- Within "My Music", select all the songs you need to download (all w/ the cloud icon - use Shift-Click)
- Right click and select download
All songs will begin downloading from iCloud -
How to allow user refer back to lecture when they are taking a quiz?
Hi everyone,
I'm new to Captivate and now I am kinda in a dilemma. Thanks for your
time watching my post!
I created a CBL in Captivate 3, the first 10 slides is a lecture and it
is followed by a 10 slides quiz set as SCORM standard.
I want the learner to be able to refer back to the lecture when they
are taking the quiz, I tried to in 2 approaches and they both have
issues in different ways.
Approach 1: "allow backward movement", and "infinite attempts". The
problem with this approach is, when the learner click "review the
quiz" and when they click "back" on the first quiz slide, the whole
quiz will be start all over, the score is flipped back to zero.
Because the quiz seeing this as a new attempt, and the learner is
allowed to make "infinite attempts" as it was configured.
Approach 2: Set "allow backward movement" and allow only "1 attempt".
The problem with this approach is, when the learner is in the middle
of the quiz and refers back to the lecture, the quiz will be
automatically shown as completed. And the learner will not get a
chance to answer those unanswered questions.
So it looks like whenever I let the learner refer back to the lecture
in the middle of a quiz, the quiz will be seen as completed!!! What am
I doing wrong? Is there a better approach that I can "allow backward
movement" and still allow user resume their quiz from where they left
off?
Sorry for the long post, I was not able to express it in a more
concise way.
Any help is really appreciated!!
-DavidWhat you are seeing is the behaviour as-designed in Captivate for quizzing.
Each Captivate movie has a "quiz scope" which begins with the very first scorable object, and ends at the Quiz Results slide. If you enter the quiz scope by starting a quiz slide, then jump back outside the quiz scope, by going back to the main content, Captivate's default behaviour is to freeze the quiz at that point. So when Captivate refers to Allow Backward Movement, it's only talking about backward movement within the quiz scope.
For example, if you get to question 1 but don't answer it and go to question 2, then answer that one, and go back to question 1, you'll still be able to answer question 1. The quiz won't be frozen. However, if you had jumped back to any slide before question 1, your quiz would have been frozen with whatever score you had accumulated at that point.
There may be a workaround you can use to get closer to what you want. Since any scorable object is classified as being part of the quiz, you can add a button on one of the very first slides that the user needs to click in order to advance. Set the properties of this button (or click box) to report a score to the quiz. This makes it part of the quiz scope. Now any content slides that fall after this button slide are also within quiz scope and moving back to them will not have the same effect of freezing the quiz.
Please bear in mind one more aspect of quiz questions: If you answer a quiz question, and then move off the slide (forward or back) that quiz question answer is frozen and cannot be changed unless you Retake the Quiz or relaunch the entire module.
Hope this helps clear up the way things work. -
Allow Users to RDP to Domain Contoller
Let me start this with, I have read every article and forum post I can find about this issue. I know that it should be as easy as granting a permsission to the user/groups.
I have 2 domain contollers (both running Server 2008 Standard), both of them are going to need to be logged in by users other than the Domain Administrators group. I have added the group that the users are in (Developers) to the following GPO.
Default Domain Contollers Policy -> Computer Configuration -> Policies -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignement -> Allow log on through Remote Desktop Services and Allow log on locally.
I have verified that these settings are being applied to the DCs by running RSOP.MSC on the two controllers and I can see that the settings that I change to the GPO are being reflected in the RSOP.MSC results.
When a user, other than a Domain Admin, tries to log in, they get the error "The connection was denied because the user account is not authorized for remote login."
Is there any other location/setting that I am missing on the GPO or perhaps the server it self that would be related to why this is not working.
Any help would be greatly appreciated.
Thank you,
AlexHere is the output of the gpresult:
Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 2/20/2012 at 12:50:33 PM
RSOP data for INTERNAL\aderr on TUWINAD02 : Logging Mode
OS Configuration: Additional/Backup Domain Controller
OS Version: 6.1.7601
Site Name: TucsonDR
Roaming Profile: N/A
Local Profile: C:\Users\aderr
Connected over a slow link?: No
COMPUTER SETTINGS
CN=TUWINAD02,OU=Domain Controllers,DC=internal,DC=az,DC=gov
Last time Group Policy was applied: 2/20/2012 at 12:45:56 PM
Group Policy was applied from: TUWINAD02.internal.az.gov
Group Policy slow link threshold: 500 kbps
Domain Name: INTERNAL
Domain Type: Windows 2000
Applied Group Policy Objects
Default Domain Controllers Policy
Default Domain Policy
The following GPOs were not applied because they were filtered out
Local Group Policy
Filtering: Not Applied (Empty)
The computer is a part of the following security groups
BUILTIN\Administrators
Everyone
BUILTIN\Pre-Windows 2000 Compatible Access
BUILTIN\Users
NT AUTHORITY\NETWORK
NT AUTHORITY\Authenticated Users
This Organization
TUWINAD02$
Read-only Domain Controllers
Domain Controllers
Enterprise Read-only Domain Controllers
Denied RODC Password Replication Group
System Mandatory Level
Resultant Set Of Policies for Computer
Software Installations
N/A
Startup Scripts
N/A
Shutdown Scripts
N/A
Account Policies
GPO: Default Domain Policy
Policy: MaxRenewAge
Computer Setting: 7
GPO: Default Domain Policy
Policy: MaxServiceAge
Computer Setting: 600
GPO: Default Domain Policy
Policy: MaxClockSkew
Computer Setting: 5
GPO: Default Domain Policy
Policy: MaxTicketAge
Computer Setting: 10
Audit Policy
N/A
User Rights
GPO: Default Domain Controllers Policy
Policy: MachineAccountPrivilege
Computer Setting: Authenticated Users
GPO: Default Domain Controllers Policy
Policy: ChangeNotifyPrivilege
Computer Setting: Everyone
LOCAL SERVICE
NETWORK SERVICE
Administrators
Authenticated Users
Pre-Windows 2000 Compatible Access
GPO: Default Domain Controllers Policy
Policy: IncreaseBasePriorityPrivilege
Computer Setting: Administrators
GPO: Default Domain Controllers Policy
Policy: TakeOwnershipPrivilege
Computer Setting: Administrators
GPO: Default Domain Controllers Policy
Policy: RestorePrivilege
Computer Setting: Administrators
Backup Operators
Server Operators
GPO: Default Domain Controllers Policy
Policy: DebugPrivilege
Computer Setting: Administrators
GPO: Default Domain Controllers Policy
Policy: SystemTimePrivilege
Computer Setting: LOCAL SERVICE
Administrators
Server Operators
GPO: Default Domain Controllers Policy
Policy: SecurityPrivilege
Computer Setting: Administrators
GPO: Default Domain Controllers Policy
Policy: ShutdownPrivilege
Computer Setting: Administrators
Backup Operators
Server Operators
Print Operators
GPO: Default Domain Controllers Policy
Policy: AuditPrivilege
Computer Setting: LOCAL SERVICE
NETWORK SERVICE
GPO: Default Domain Controllers Policy
Policy: InteractiveLogonRight
Computer Setting: Account Operators
Administrators
Backup Operators
INTERNAL\dclemmer
INTERNAL\Developers
INTERNAL\SysAdmins
Print Operators
Server Operators
GPO: Default Domain Controllers Policy
Policy: CreatePagefilePrivilege
Computer Setting: Administrators
GPO: Default Domain Controllers Policy
Policy: BatchLogonRight
Computer Setting: Administrators
Backup Operators
Performance Log Users
GPO: Default Domain Controllers Policy
Policy: NetworkLogonRight
Computer Setting: Everyone
Administrators
Authenticated Users
ENTERPRISE DOMAIN CONTROLLERS
Pre-Windows 2000 Compatible Access
GPO: Default Domain Controllers Policy
Policy: SystemProfilePrivilege
Computer Setting: Administrators
NT SERVICE\WdiServiceHost
GPO: Default Domain Controllers Policy
Policy: RemoteShutdownPrivilege
Computer Setting: Administrators
Server Operators
GPO: Default Domain Controllers Policy
Policy: BackupPrivilege
Computer Setting: Administrators
Backup Operators
Server Operators
GPO: Default Domain Controllers Policy
Policy: EnableDelegationPrivilege
Computer Setting: Administrators
GPO: Default Domain Controllers Policy
Policy: UndockPrivilege
Computer Setting: Administrators
GPO: Default Domain Controllers Policy
Policy: SystemEnvironmentPrivilege
Computer Setting: Administrators
GPO: Default Domain Controllers Policy
Policy: RemoteInteractiveLogonRight
Computer Setting: INTERNAL\dclemmer
INTERNAL\Developers
INTERNAL\Domain Admins
INTERNAL\Domain Users
INTERNAL\SysAdmins
GPO: Default Domain Controllers Policy
Policy: LoadDriverPrivilege
Computer Setting: Administrators
Print Operators
GPO: Default Domain Controllers Policy
Policy: IncreaseQuotaPrivilege
Computer Setting: LOCAL SERVICE
NETWORK SERVICE
Administrators
GPO: Default Domain Controllers Policy
Policy: ProfileSingleProcessPrivilege
Computer Setting: Administrators
GPO: Default Domain Controllers Policy
Policy: AssignPrimaryTokenPrivilege
Computer Setting: LOCAL SERVICE
NETWORK SERVICE
Security Options
GPO: Default Domain Policy
Policy: LSAAnonymousNameLookup
Computer Setting: Not Enabled
GPO: Default Domain Policy
Policy: TicketValidateClient
Computer Setting: Enabled
GPO: Default Domain Controllers Policy
Policy: @wsecedit.dll,-59013
ValueName: MACHINE\System\CurrentControlSet\Services\NTDS\Parameters\LDAPServerIntegrity
Computer Setting: 1
GPO: Default Domain Controllers Policy
Policy: @wsecedit.dll,-59043
ValueName: MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\RequireSecuritySignature
Computer Setting: 1
GPO: Default Domain Controllers Policy
Policy: @wsecedit.dll,-59044
ValueName: MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\EnableSecuritySignature
Computer Setting: 1
GPO: Default Domain Policy
Policy: @wsecedit.dll,-59058
ValueName: MACHINE\System\CurrentControlSet\Control\Lsa\NoLMHash
Computer Setting: 1
GPO: Default Domain Controllers Policy
Policy: @wsecedit.dll,-59018
ValueName: MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters\RequireSignOrSeal
Computer Setting: 1
Event Log Settings
N/A
Restricted Groups
GPO: Default Domain Policy
Groupname: INTERNAL\SysAdmins
Members: N/A
System Services
N/A
Registry Settings
N/A
File System Settings
N/A
Public Key Policies
N/A
Administrative Templates
GPO: Default Domain Policy
KeyName: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\AUOptions
Value: 3, 0, 0, 0
State: Enabled
GPO: Default Domain Policy
KeyName: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\NoAUAsDefaultShutdownOption
Value: 1, 0, 0, 0
State: Enabled
GPO: Default Domain Policy
KeyName: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\AutoInstallMinorUpdates
Value: 1, 0, 0, 0
State: Enabled
GPO: Default Domain Policy
KeyName: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\DetectionFrequency
Value: 12, 0, 0, 0
State: Enabled
GPO: Default Domain Policy
KeyName: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\ScheduledInstallDay
Value: 0, 0, 0, 0
State: Enabled
GPO: Default Domain Controllers Policy
KeyName: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\fDenyTSConnections
Value: 0, 0, 0, 0
State: Enabled
GPO: Default Domain Policy
KeyName: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\NoAutoRebootWithLoggedOnUsers
Value: 1, 0, 0, 0
State: Enabled
GPO: Default Domain Policy
KeyName: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\NoAUShutdownOption
Value: 1, 0, 0, 0
State: Enabled
GPO: Default Domain Policy
KeyName: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\ScheduledInstallTime
Value: 3, 0, 0, 0
State: Enabled
GPO: Default Domain Policy
KeyName: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\DetectionFrequencyEnabled
Value: 1, 0, 0, 0
State: Enabled
GPO: Default Domain Policy
KeyName: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\NoAutoUpdate
Value: 0, 0, 0, 0
State: Enabled
GPO: Default Domain Policy
KeyName: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\AUPowerManagement
Value: 1, 0, 0, 0
State: Enabled -
Code for website to allow users to download free Reader
This is not the right forum, but I couldn't find one that applies, sorry.
I'm adding some PDF files to my website for download, and I need to find the code that I can add to my website that will allow users to download the free Reader if they don't already have it. Can someone point me to that, please?
Thanks!Found it:
http://www.adobe.com/misc/linking.html
(related question popped up over there --->
which had the link.)
I see that it's actually just the image, and there's no code... you just hyperlink the image yourself. Long time ago there used to be some HTML code that came along, and did the link for you as a reference or something. I'm set now... thanks. -
I am throughly confused about what I need, so I'm sorry, I'm sure this thread is a duplicate of several that are out there, but most of it seems to talk over my head.
I have a VERY old version of Adobe Acrobat (version 5.0, yes gasp in horror). I have the VERY old version of Acrobat Distiller (version 5.0). I have a form that was created in these versions of Acrobat. It works perfectly, even in the new version of Reader (v9), excpet that the form data can't be saved, not a shocker.
What software do I need to purchase to get my old form to allow people to save the form data, WITHOUT them having to download any extensions for their Reader?
I hope that makes sense.Hi,
LiveCycle Reader Extensions ES is part of Adobe's server product and can be very expensive. In addition to the cost of the sever component, you need to pay a fee to Adobe to apply the reader extensions to each form. It is intended for government agencies and large organisations.
The ability to reader enable a form from within Acrobat is intended for ad-hoc forms that won't be going out to a lot of people.
When you design a form in LC Designer, you can specify the target version of Acrobat/Reader (in the File/Form Properties/Defaults). This allows you to check that all of the functionality that you build into the form, will work for your users.
When you reader enable the form it will still work with the target version that you have set in LC Designer.
When you reader enable with the full LC Reader Extension ES server product, you are basically turning ON features for users with Reader.
However when you reader enable using Acrobat, you are turning ON features like allowing users to save data. But at the same time Adobe are turning OFF some features like data connections.
It really depends on how many data processes you want with the form. If it is small then stick with Acrobat. If you are a large organisation looking to improve data collection and processing then you should look at LC Reader Extensions ES.
Hope that helps,
Niall -
We have a SharePoint 2007 document library setup with a custom template using MS Word. This template is a doc and/or a docx (we have used both and both have the pattern error). We are using the Document Information Panel in the document
when opening to be filled in. One of the fields - Test - is a multiple lines of text
field. When we use the Enter key a red dotted line appears. The message for the error appears below:
Only specific pattern allowed. Only data in the following pattern is allowed: ',*\S.*'
Does anyone know why this is? We need the ability to use the
Enter key. We have MS Word at 14.0.4 and it does not have an issue with using the
Enter key. Any later version of MS Word this issue occurs.
SharePoint Configuration database version: 12.0.0.6608
MS Office 2010 14.0.6029.1000
ChrisHi,
Did you installed some updates recently? Many users encounter this issue after installing KB2817537 or some updates released in Sept.
This issue occurs because the regular expression used to validate the property doesn't allow for line breaks.
Fortunately, DPKs attached to this bug have been successfully applied by the build lab.
We are working on this issue and it will be fixed in future update.
To work around this issue, please temporarily uninstall the
KB2817537. If that wouldn’t work, please also uninstall
KB2760758, KB276041 & KB2760411 and then test the issue again.
Thanks,
Steve Fan
TechNet Community Support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Query to find out the time used by an user for an application
Hello All,
I want to know the query to find out the whole time used by the user for an application. Please view the below data
Employee:
SNO EMP_ID EMP_NAME EMP_DATE LOGIN_TIME LOGOUT_TIME
1 10 Visu 21-Nov-2010 06:30:00 07:30:00
2 10 Visu 21-Nov-2010 06:40:00 07:20:00
3 10 Visu 21-Nov-2010 06:50:00 07:50:00
4 10 Visu 21-Nov-2010 07:30:00 08:30:00
5 10 Visu 21-Nov-2010 09:30:00 10:30:00
By checking the above data we can say that the total time Visu used the application is
8.30 - 6.30 (From 1,2,3,4 records) = 2hrs
10.30 - 9.30 (Based on 5th rec) = 1hr
So the total time Visu used the application would be 3 hrs = 180 mins.
Could you please help me in getting the result from that data using a query?odie_63 wrote:
I think it may be solved with analytics too.
with t1 as (
select 1 sno,10 emp_id,'Visu' emp_name,'21-Nov-2010' emp_date,'06:30:00' login_time,'07:30:00' logout_time from dual union all
select 2,10,'Visu','21-Nov-2010','06:40:00','07:20:00' from dual union all
select 3,10,'Visu','21-Nov-2010','06:50:00','07:50:00' from dual union all
select 4,10,'Visu','21-Nov-2010','07:30:00','08:30:00' from dual union all
select 5,10,'Visu','21-Nov-2010','09:30:00','10:30:00' from dual
t2 as (
select emp_id,
emp_name,
emp_date,
to_date(emp_date || login_time,'DD-MON-YYYYHH24:MI:SS') login_time,
to_date(emp_date || logout_time,'DD-MON-YYYYHH24:MI:SS') logout_time
from t1
t3 as (
select t2.*,
case
when login_time < max(logout_time) over(
partition by emp_id,emp_date
order by login_time
rows between unbounded preceding
and 1 preceding
then 0
else 1
end start_of_group
from t2
t4 as (
select t3.*,
sum(start_of_group) over(partition by emp_id,emp_date order by login_time) grp
from t3
t5 as (
select emp_id,
emp_date,
min(login_time) login_time,
max(logout_time) logout_time
from t4
group by emp_id,
emp_date,
grp
select emp_id,
numtodsinterval(sum(logout_time - login_time),'day') time_spent
from t5
group by emp_id
order by emp_id
EMP_ID TIME_SPENT
10 +000000000 03:00:00.000000000
SQL> SY.
Maybe you are looking for
-
Game Center ID not associated with Apple ID
I Upgraded my daughters iPad to iOS 8. It is asking me to enter the Apple ID to log into Game Center vs her Game Center ID. When i do this is requires me to create a new Game Center account. I enter the old account name and it says it is already take
-
Adobe Digital Editions will not recognise my Elonex Ebook 621eb
I have just received an Elonex Ebook 621eb and have gone through the process of downloading ADE and it has authorised my computer, however when I connect the Ebook via the usb to the computer nothing happens - it does not come up with the Adobe ID to
-
CFFILE - uploading power point - ppt and pptx
Hi, How can I update the mime types in my cffile to reflect office 2007 documents. This code not longer accepts power point: application/vnd.ms-powerpoint. Thanks!
-
Security in OBIEE from different Database.
Hi experts, we have created our reports from database A . and we have created the security table in Database B, So can we access the same security table in same rpd and can we apply this security to Database A users.. We don't want to create security
-
Hi Gurus We have Integrated BI component of SEM server to portal SEM SAP-ABAP 13 SAP-BASIS 13 SAP_BW 15 According to Note 1032261 BI Additional ABAP Support Packages (intermediate Support Packages) have been delivered for BI. For this reason, t