Time phase mrp

how to do Time-phased MRP is accomplished by exploding the bill of material, adjusting for inventory quantities on hand or on order, and offsetting the net requirements by the appropriate lead times.
how can we adjust the inventory after run this mrp and where can do that

Planning calendar will not cause the run of MRP!
You still need to run MRP; it will take into consideration the planning calendar.
Edited by: Mario Adler on Feb 17, 2011 9:37 AM

Similar Messages

Schedule lines should not change 3 weeks time from MRP date

Hi
Is there any specific customisation required to get following results in case of schedule lines.
1) MRP should not change/adjust the already send delivery schedule lines which are lying within 3 weeks time from MRP date
2) System should not allow to book the GRN unless the messages / print out has been generated from the system in case of scheduling agreement.
Thanking you
Shantakumar
09944009752

Hi,
There are 2 possibilities:
1. use MRP fixing using planning time fences, this is done by putting the relevant settings in the MRP1 view of the material master
2. use the firming options of the scheduling agreement, these are set per material number that is entered in the scheduling agreement.
The GR can only be posted for schedule lines that have been processed aka output generated.
Regards,

IPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

How do i get iPhoto to time phase? (meaning take the same pic pose and show it over time)

how do i get iPhoto to time phase? (meaning take the same pic pose and show it over time)

I'm not sure that this is something that iPhoto does. However, neither is it something I quite understand. What do you mean by "pic pose"?
Regards
TD

Time phase Min/max replenishment models for future dates

Hi,
We are working on a safety stock requirement of Maximum/Minimum replenishment model in APO.
It seems to work great except it cannot be time phased. Our business wants different safety stock strategies at different times of the year.
Please suggest if there is a way that we could “time phase” min/max replenishment models for future dates?
Thanks in advance for your help!
regards
Yogendra

Many thanks for this.
I can see entirely why it's designed as such, but I just find it slightly frustrating that there's no way to break the link between the order and the shipment out to the depot. Just to clarify, we're not requiring the orders to change - they will still be made and will come in - but just that the orders themselves don't specifically need to be the stock that is used for the replenishment.
So -
1. Min Max identifies depot needs replenishing.
2. Central distribution does not have (enough) stock to replenish.
3. Order is made to replenish central distributions stock.
4. We ship whatever we've got, when we've got it, to depot to replenish.
It's the bit where Min-Max is trying to replensih a specific depot rather than our central distribution centre that's my problem.
I suspect that, as you say, that specific issue is not directly fixable without getting our IT contractors to do a customisation.
I'm going to look into your Supply Date Offset suggestion now, though I'm not sure how this affects the shipping after the orders are placed. The orders themselves are approved manually after we've checked our stock position (i.e. what's in with the recycling team), but we recycle & refurb probably 60% of our maint stock so there'll always be kit turning up after the order has been made because of the long lead times.
Thanks again.

Planned order creation with sale order assingment at the run time of MRP

some material item not planed with sale order stock in MRP run time. all setting in material master are corrected as i knowing.having some mistake in setting other configuration.

Planning strategy is Make to order individual collective as individual but still come as make to stock plan orders
Incase of Header material- Plan order is creating in MTS
Check the sale order procurement tab, Is The requiremnt type is relevant to your Stratergy?, if not chnage it to correct requiremnt type and rerun MRP again
Incase of component material- Plan order is creating in MTS
Check for the component material MRP 4 View, individual/Coll.req- as 1. If not set as 1 and rerun the MRP again

MRP run details(date and time when MRP was run)

Hello,
I need time stamps of all MRP/MPS run for a particular material. Please let me know relevant T.code/FM/BADI.

Dear
One more way to find this is using Transection Code AUT10.
Here you can find not only Last MRP date but some other useful data also like user, date ,time and so many.
Try it by using T.Code like MD01, MD02, MD40 etc.
Or goto se16-SAP Table MDKP-Here you will get MRP run details
Hope this helps
Regards
JH

Planning time fence- MRP

Hi Guys:
Can I use Planning time fence if i am using MRP type PD?
what are the settings i need to maintain for planning time fence and how it defined generally , is it a function of leadtime?
Thanks
Kodali

Hi Padmasri :
How to freeze the order proposals if i am using MRP Type PD.
Because , I might run MRP Yesteraday it might have created Planned orders or Purchase requistions and Buyer might have issued purchase order to the vendor.
today i got some more sales order and additional requirements , So when i run MRP today System propose Purchase requistions asking to change the previously created requistions on Previous Run?
Could you explain how to manage this scenarious without timing fence and still using MRP type PD?
Thanks
Kodali

GR Processing time using MRP areas

Hi Experts,
I have setup where the same materials is purhcased but planned indemendent using MRP areas. There is a requirement to maintain a different GR Processing time to the material depending on the MRP area. I am only able to maintain the GR processing time on the "general material master" and not in the MRP areas.
Please give me input on how to solve this?
Thanks in advance.
Anders

Hi,
I have
1) created a MRP Profile with GP processing time 1.
2) on MRP 2 left the GR processing time blank =0
3) Assigned a MRP are to the material with reference to the MRP profile
= GR processing time updated in MRP2 view
Do you have other suggestions?
/Anders

EHP4 error in ABAP Down time phase

Hi All,
I am installing EHP4, currently the system got stuck in downtime phase .Facing the SQL error
"22859 - ORA - 22859: invalid modification of columns in DDLs   "
2EETP345 TATEMENT for 2EETP345
2EETP345 : error in DDL , name tab 2EETP345 not activated
We also got a solution for this through SAP note : 1160950
They have recomended to implement this correction note in the system, but since we are in Shadow phase, we are not allowed to get into the system and through shadow system we are able to connect only via DDIC,SAP* user.But with these users we are not able to implement SNOTE
So we even tried to unlock the physical system using the command : ./SAPup unlockshd <SID>
Its throwing an error :
"SAPup error unable to set envronment variable"
Please help to resolv this issue

hi Sunny,
Here it is :
gbahev99:dh2adm 112% ./SAPehpi -help
Enter the path of your root directory [/import/basis/EHG/D2/EHPI/abap]:
Root directory = /import/basis/EHG/D2/EHPI/abap
Reexecuting ./SAPehpi with adapted environment and restart=3.
Usage: SAPehpi [parameter options] [functional options] [functions]
            parameter options:
                      rootdir=<upgrade directory path>
                      gt=SCROLL/SERVER
                      uaport=<port number>
                      hm=<n>
                      cdpath=<CDROM path>
                      toc=<CD archive>
             functional options:
                      DEBUGON
             functions:
                      -V[ERSION]
                      startshd/stopshd
                      unlockshd/lockshd
                      set stdpar/rswpar/shdpar
                      set ddicpwd/shdddicpwd
                      set dbopsys/adjprp/sapmodi
                      analyse table <table-name>
                      reset prepare
                      showinput <file>
                      readCD/readKernel
                      export type=SPDD/SPAU ta=.. rel=.. log=..

Is there any function module about same record with a time phase?

Dear Expert,
I am developing a program to upload time data into SAP and I was asked to delete the records which coming within 5 mintues and upload the last one into SAP.
Is there any function module about this?
BR Wang Yichao

HI ajay,
1. If i am not wrong, this infotype hrp1005,
is maintained using PP01.
2. One method is
using FM RH_RELATION_MAINTAIN.
regards,
amit m.

While MRp run which time is taken into consideration(from PIR or from MM)

Hi PP gurus,
When we run MRP which time is taken into consideration for a bought out material :
From Material Master ( Planned delivery time)
or
From Purchase Info record : the delivery time mentioned in the PIR ..
In my case the MRp run is showing 2 different results in different systems for the same material.
Also please let me know that if there is any priority that can be set in SPRO for picking up the time while MRP run and what takes priority and when.

Hi!,
If you are getting two different values after MRP in two different systems then please check:
1. whether any other info record exist for the same material in any of the system.
2. Have you maintained source list in both the systems for the material. How many sources are defined in the source list and in what sequence. If you have not maintained a quota arrangement then system will take first line item of the source list.
You can't set the priority for the planned delivery time but you can set whether system should take planned delivery time from info record or not in IMG setting Material Management > Consumption based Planning > Planning > Procurement Proposals > Define External Procurement. To use the planned delivery time from info record you must maintain a source list for that material with same vendor. Also make that source as MRP relevant.
Regards,
Uday

What is the difference (& use) between CBP & MRP & FBP

Dear Experts,
Can anyone please tell me what is the difference ( & uses ) between Consumption Based Planning & Material Requirement Planning & Forecast Based Planning?
how are these linked to each other?
Instead of sending Big Documents,Please tell me in few lines in a Lay mans Language.
I read these topics in Martin Murray Book (its the Bible of MM acc. to me) but still did not understand it.
Can anyone please explain me.....
Kind Regards
Sajid

Dear Sajid,
Read This link Must help u to get all details u required
http://help.sap.com/saphelp_45b/helpdata/en/7d/c2821c454011d182b40000e829fbfe/frameset.htm
All are Used In Material Requirement Planning(MRP)
Consumtion base Planning :-   Consumption-based planning procedures are straight forward materials planning procedures with which you can achieve set targets with relatively little effort. Therefore, these planning procedures are used in areas without in-house production and/or in production plants for planning both B- and C-parts and operating supplies.
The type of order proposal which is automatically generated during materials planning depends on the procurement type of the material. For materials that are produced internally, a planned order is always created. For materials procured externally, the MRP controller has the choice between creating a planned order or a purchase requisition. If he decides to create a planned order, he must then convert it into a purchase requisition and make it available for the purchasing department.
in MRP there are three Type
1) Reorder Point Planning
     A) VB - Manual Reorder
     B) VM - Automatic
     C) VV - Forecast
2) Forecast Based Planning :- Material planning is based on forecasted requirements. This is preferred when the future requirements might not be the same as the past consumption, but to forecast, the past values are considered.
Like reorder point planning, forecast-based planning operates using historical values and forecast values as future requirements are determined via the integrated forecasting program. However, in contrast to reorder point planning, these values then form the basis of the planning run in forecast-based planning.
The forecast, which calculates future requirements using historical data, is carried out at regular intervals. This offers the advantage that requirements, which are automatically determined, are continually adapted to suit current consumption needs. If, during the current period, material has already been withdrawn from stock, then the forecast requirement is reduced by the quantity of material that was withdrawn. This means that the quantity of the forecast requirement that has already been used is not included in the planning run again.
3) Time Phase Planning :- If a vendor always delivers a material on a particular day of the week, it makes sense to plan this material according to the same cycle in which it is delivered, but displaced by the delivery time. This is possible with the time-phased planning procedure.
If a particular material is to be planned using this procedure, you must set the MRP type for time-phased planning and you must enter the planning cycle in the material master record. You enter the planning cycle in the form of a planning calendar in the Planning cycle field. You must also define a planned delivery time and the Lot-for-lot order quantity as the lot-size key.
Regards,
Pardeep Malik
Edited by: Pardeep Malik on Mar 20, 2009 11:58 AM
Edited by: Pardeep Malik on Mar 20, 2009 12:10 PM

MRP problem in case of MD51

Hi,
I have not activated MRP in OMDU tcode. So at the time of MRP run I should get error that "Requirements planning is not active in plant XXXX" but in case of tcode MD51 this is not the case.
When I am running MRP for WBS element using MD51, I am getting planned order for a header material assigned but at the same time let me tell you, system is not exploding BOM for the same.
My concern is in case of deactivated MRP for that plant why system is not giving error and allowing me to run MRP using MD51..??

Hi,
Go to se16 enter the table J_1IRGSUM and Check the material quantity available.
Regards,
Chetan

Purchase order status in MRP run

Hi Gurus,
I have a doubt in MRP run.
While doing the MRP run, can there be any open PO s or is it mandatory to close them.
Can you also please suggest me on how to run the MRP.

Hi,
MRP Run
Purpose
The Material Requirements Planning (MRP) function enables you to plan material requirements for complex manufacturing processes. You use the MRP Wizard to create and run MRP scenarios. The MRP Wizard generates recommendations for the production and purchasing orders required to produce the final product on time and in the required quantity. You then use these recommendations to create production and purchase orders in the Order Recommendation Report.
The order recommendation cannot be issued for requirements that happened in the past (before the present day). Since the purchasing or production process cannot be completed in time, the MRP does not mix the real past data with new recommendations for the same period.
Prerequisites
●     You have defined the
○     Planning system
○     Procurement method
○     Order mutliple
○     Minimum order
○     Lead time
See also: Item Master Data, Planning Data Tab.
●     You have set the time interval between orders. See also: Define Inventory Cycles.
●     You have defined the appropriate items as non-production bills of materials (if required). See also: Item Master Data, General Tab.
●     You have defined default warehouses. See also: Define Warehouses.
●     You have defined forecasts. See also: Forecasts.
●     You have selected the Consume Forecast option to make the system exclude existing sales orders from the forecast. If this is not selected, the forecast considers existing sales orders as an additional requirement. See also: Sales Order.
●     You have set the planning definitions. If you chose Consume Forecast, you have defined the consumption method, days forward and days backward. See also: General Settings, Inventory Tab.
Process Flow
       1.      Start the MRP Wizard.
       2.      Create a new MRP scenario or select an existing one. (See also: MRP Wizard: Select New or Existing Scenario.)
       3.      Define the parameters for your scenario, such as the planning horizon and item details.
You also choose your display preferences. (See also: MRP Wizard: Scenario Details.)
       4.      Define the data sources for requirements that you want to include in your MRP scenario.
For example, you define whether you want to consider the existing stock or the minimum stock level. You can also include a predefined forecast. (See also: MRP Wizard: Data Source.)
       5.      Save the scenario or run it.
After you run the scenario, the system displays the MRP Results.
If there are red figures in the result table, solve the problem and re-run the MRP.
       6.      Analyze the MRP results. You can display the final stock quantity before the MRP run or after it.
       7.      Save the recommendations and exit the MRP Wizard.
Result
After completing the MRP Wizard, you still need to create the purchase and production orders in accordance with the MRP recommendations. See also: Order Recommendation Report.
Hope this will help.
Reward Point if helpful
Thanks,
Raja

Time phase mrp

Similar Messages

Maybe you are looking for