Time--Privilege leaves accumulation for New Joinees after 1 year of service

Dear Experts,
We have configured Privilege leaves for Client and its working fineu2026
Requirement u2013 Where as a new joinee should avail the PL accumulated for first years only after completing on year of service.
New Joinee is getting quota every month but now we have to restrict to avail the quota till completing of one year in Org and on the day he/she completes one year should be allowed to take them.
Regards,
Ratan Roy
Edited by: ratan roy on Feb 26, 2009 11:40 AM

ok,
Posted second time
Edited by: ratan roy on Mar 9, 2009 5:17 AM

Similar Messages

  • Standard Program for Retirement Calculation or Year of Service

    Hi,
    I like to know whether there is any standard report program for Retirement Calculation or Year of Service. If it is available please share it ..

    Year of service     s_ph9_46000216
    or u can run flexible employee data S_AHR_61016363, select seniority, date of entry etc
    S_L9C_94000095  choose employment status 'retiree'

  • Mail not checking for new mail after sleep

    Mail will not check for new mail when waking from sleep unless I log off and back on first. I tried quitting Mail, which works once in a while. I tried putting all Accounts back online, which works occasionally. But most often nothing works except logging off. Must I change to another mail program, or is there a better solution.

    After trying various solutions, I found that the fault was not with Apple Mail or my iMac but with Airport taking time to warm up after sleep. I switched to an Ethernet connection instead and it works fine now

  • Quota credit on 1st of calendar year for existing employees and for new joinees on prorata basis

    Dear All,
    we are having an issue in quota generation, where casual leave quota should get credited on 1st of every calendar year and for mid month joiners on prorate basis. If we select calendar year it is crediting on 31st of calendar year, but we need it to be credited on 1st  of January and also checking the prorate condition for new joiners.
    So please guide on whether it is possible through standard or any work around solution. If so how can it be achieved.
    Thanks
    Vijaya

    Hi,
    check this one prorate basis -
    http://scn.sap.com/docs/DOC-52928
    for you quota on 1st day of calender year, check the settings in the table V_T559L
    - Validity/deduction interval
    - Validity period for default values
    Best Regards.

  • Windows could not search for new updates after applied June 2014 Windows Updates - Error code 80244004

    After applied June 2014 Windows Updates from Microsoft (Not using WSUS server to obtain WU), our Windows Server 2012 R2 and Windows Server 2008 now getting this error message when we perform the "Check for Updates":
    Windows could not search for new updates.  Error code 80244004. 
    Richard

    Hi Richard,
    Just addition, please refer to following KB to reset Windows Update components and monitor the result.
    How do I reset Windows Update components?
    If didn’t use ESET security software, please also refer to following thread and check if can help you.
    Latest
    version of Windows Update causing error 80244004
    Hope this helps.
    Best regards,
    Justin Gu

  • Full true Administrator Privileges and rights for New User?

    I am wondering how to grant full administrator privileges to a newly created user?
    Here is the environment:
    Windows 2012 Server 64bit
    Not part of a domain <WORKGROUP>
    Here is the problem:
    I created a new user we will call them "SecondaryAdmin", and made them part of "Administrators" group as well as the "Remote Desktop Users" group.
    I login through an RDP session as "SecondaryAdmin", I go to a command prompt, and I run IISRESET and it tells me:
    "Access denied, you must be an administrator of the remote computer to use this command. Either have your account added to the administrator local group of the remote computer or to the domain administrator global group."
    Additionally, I have IE Enhanced Security turned off, but if I open Internet Explorer while logged in as "SecondaryAdmin" it still displays the IE Enhanced Security warnings.
    Also, if I try to copy a file to the root "C:\", it gives me "Access denied error" forcing me to continue with elevated administrator privileges.
    If I run the command prompt as "administrator" I can do an IISRESET without error.
    If I run Internet Explorer as "administrator" I do not get the warnings.
    If I run windows explorer as "administrator" I do not get the access denied.
    However, I WOULD NOT trust this "SecondaryAdmin" account to install ANYTHING. Even if you ran the install executable as "admin", often times these install files will fire off secondary scripts that wont be fired off as "admin",
    which may lead to incomplete or corrupt installs.
    This changed from Windows 2008 R2 to Windows 2012.... If I do the same exact thing in Windows 2008, I am able to do all the above things without prompt or error.
    So how can I give a new user true, full, elevated, admin privileges without having to run everything as administrator? Some obscure setting in GPO? Some registry setting (already tried LocalAccountTokenFilterPolicy)?
    What I have tried:
    UAC is OFF
    Firewall is OFF
    IE Enhanced Security is OFF
    Remote Management/Desktop Enabled
    User part of Administrators Group and Remote Desktop Group
    Used "netplwiz" to verify user is Administrator
    Please help!

    Hi Chris,
    I appreciate your answers, however, this is not what I am looking for.
    I want the "SecondaryAdmin" user, who is part of the Local Admininstrator group, to have full Admin access.
    I DO NOT want them to have to do anything special, or have any user intervention.
    NO yes/no dialog boxes
    NO clicking "Run As Admininstrator"
    NO changing shortcuts or executable file properties to always "Run as Admin"
    I simply want the "SecondaryAdmin" account, which is part of the "Administrators" group, to have the same access and run the same seamless way it did in 2008 R2, with no user intervention required.
    This is what I am looking for.
    Kind Regards,
    James

  • Using old time machine back ups for new mac

    I have upgraded to a new intel macbook pro from a g4 powerbook. I was able to move my files and apps to the macbook pro. How do I get time machine to use the old back up data on my new laptop. I have selected the hard drive that has the back up data from my powerbook but the macbook does not pull up the info.

    First a couple of things you're posting in the iMac forum not the MacBook Pro forum. In addition there is a Time Machine Forum. I'd recommend reading the Time Machine FAQ's there. You can find the TM forum at:
    http://discussions.apple.com/forum.jspa?forumID=1342
    and the MacBook Forum is at:
    http://discussions.apple.com/category.jspa?categoryID=190
    Roger

  • HT203177 Can time machine backup data for newer OS?

    I had upgraded my Macbook to OS X 10.7
    Can I continue to backup data for Time Machine used to backup data for the same Macbook with previous version of OS?

    Yes. Time Machine will continue to backup your system as it should.

  • My computer locks up if i leave it for a minute

    my computer locks up every time i leave it for a minute. how do i unlock it?

    Hi,
    Do you wish to increase the time or remove all together ? Please use the following tutorials
        http://www.dummies.com/how-to/content/windows-81s-power-settings-and-sleep.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • MIGO not displaying GOITEM-SGTXT for new posting

    Hi All,
    MIGO not displaying GOITEM-SGTXT for new posting
    last year postings SGTXT  is visible,
    while checking in customer exits there is no no code.
    I want to make it visible GOITEM-SGTXT.
    Plz help.
    Thanks
    Saket

    Hi guru's,
    I have similar issue with MIGO Material Doc display,
    The screen field GOITEM-SGTXT on the 'Where' tab is not displaying for current year ,
    Previous years the Text field is displaying with the data.
    GOITEM-SGTXT is getting the data from ML18N ,  ESSR-TXZ01 as the text is not entering through MIGO.
    I checked the customer exit and the BADI's for the MIGO , but not activated for manipulating the
    GOITEM-SGTXT.
    Please give me an idea what makes this issue.
    System Details:
    ECC 5.0
    SAP_APPL - 5.0     Logistics.
    SAP_ABA -  6.40   Cross-Application Component
    Thank you

  • I have been using Lightroom 4.4 successfully for over 2 years.  Just tried to import some new photos after a vacation and the application crashes when I click "import" every time.  Tried restarting computer.  Version says it is up to date.

    I have been using Lightroom 4.4 successfully for over 2 years.  Just tried to import some new photos after a vacation and the application crashes when I click "import" every time.  Tried restarting computer.  Version says it is up to date.
    How do I get formal support for this from Adobe?

    Thanks for the response.  The application was crashing.  A Windows message was displayed showing "Lightroom.exe has stopped working", "Windows can check online for a solution the problem.". Etc.
    I just launched Lightroom to check the exact message for this reply - and the Import worked.  It had failed dozens of times before. 

  • HT202213 can home sharing link automatically or do I have to connect each time after connection is lost ie if i leave house for day with phone do I have to connect shared library again on phone in evening when back in house?

    Can home sharing link automatically or do I have to connect each time after connection is lost ie if i leave house for day with iphone or ipad do I have to connect shared library again on iphone/ipad in evening when back in house? It would be good if it just links automatically

    Well then maybe I misunderstood what you meant even though now that you explained it again, I should have though about that.
    When you leave the house in the morning with your device, you lose the connection to the library because you are no longer on the same WiFi network as you are at home. You have to be on the same network in order to use Home Sharing. Once you get home again, you have to select the Shared Library again.
    I apologize for the confusion or misunderstanding.

  • I am trying to use the liquify tool for the first time. I created a new document (RGB/8) and before I place my photo, the liquify option is available. After I place the photo, the liquify option disappears. What am I doing wrong?

    I am trying to use the liquify tool for the first time. I created a new document (RGB/8). Before I place my photo, the liquify option is available. After I place the photo, the liquify option disappears. What am I doing wrong?

    What am I doing wrong?
    For one thing you forgot to mention the version of Photoshop you use.
    Did you place the image as a Smart Object? Liquify got Smart-capabilities with Photoshop CC.

  • I was not warned that audiobooks are a one time download only for those using iCloud to backup. As a result I've lost my audiobook when switching to a new iPhone after the previous phone was damaged. Will Apple refund me for the audio book?

    I was not warned that audiobooks are a one time download only for those using iCloud to backup. As a result I've lost my audiobook when switching to a new iPhone after the previous phone was damaged.
    Will Apple refund me for the audio book?
    the irony of this is that the lost audio books is Steve Jobs biography!
    Starting to wonder about the benefits of Android :-/

    If you haven't been keeping a backup of your downloads (none of your iTunes downloads are included in an iCloud backup, apps, music etc are only redownloadable whilst they remain in your country's store) then you can try contacting iTunes support and see if they will grant you a redownload : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Firefox sync, I had to register for the second time using the same email id. After second registration, the new one and the old one do not sync. ????

    I am using firefox sync for more than a year. Last week, when I tried to set up sync on my work computer, it tells me that the email id is unknown and to register. Anyway I registered. But it is starting from scratch. None of my old stuff synced to this PC.
    In my home computer I am using the same email id, and it has all the data. It is still syncing the data to the server. At least I think it does. Because I have not seen any Sync errors in my home computer.
    I want to know, how can I login with the same email id in two different computers, but have different data in each.

    Homeuser66,
    If you are running Firefox 29, with the new version of Sync, see this KB article - [[How to update to the new Firefox Sync]]
    Do that before trying to add a new device.

Maybe you are looking for