Time Recording in Brazil

Hello
My customer has an operation in Brazil. They are telling me that the Brazilian ministry of labour has requirements around time recording i.e. a time recording sytem must be in place for certain employees to meet statutory requirements.
Does anyone know about this? Can CATS be used to meet the requirement or does it need to be a clocking solution?
Thanks
Chris Burfitt

Hi Chris,
Im sorry im not sure how this works but Pl. go through the link. It has some information about brasil laws. see if it can help
http://www.ehow.com/about_5561564_brazilian-labor-laws.html
This is what is given for working hours and breaks and working hours
Working Hours
Work day hours are limited to eight hours unless otherwise specified, and a maximum of 10 hours even by contractual agreement. In extreme cases where the employer needs the employee to work longer than the standard contractual limit, the employer must give a 10-day notice and provide remuneration of no less than 25 percent above the standard rate of pay.
A rate 20 percent above the standard rate of pay is required for shifts occurring between 10 p.m. to 5 a.m.
Breaks and Vacations
A minimum one hour break is required after a period of six hours at work. Every two days, employees also must receive one period of 11 consecutive hours without work, and at least one day off per week, usually Sunday.
In cases of recording, a break of 10 minutes is provided after 90 minutes of consecutive work, which will not be deducted from the accrued working hours.
regards,
brinda

Similar Messages

To transfer time events from external time recording system to sap r/3

hi all,
I have a task to make an interface program between external time recording and sap r/3, and then to transfer the time events from that external system to sap system with the help of an rfc, i have got some information like the data first has to be transferred to the table CC1TEV and then from this table the data will be uploaded to 2011 infotype with the help of a standard program, but i am unable to find a solution for making the interface program and the RFC or BAPI which will transfer the records from external system.
if anybody has any information on this plz help me out to solve this problem.

Which recorgding terminals using to capture time events? They should have give some guidelines about this?
Regards
niranjan

How can we change the field confirmed work of SAP PPM from edit to not edit mode ? I need it into non edit mode for time recording with ChaRM

Hello everyone,
Do someone meet this issue ? Do you know if it has a link with customization of ppm or customization of ITSM ?
Many thanks in advance for your replies !

It seems that I've solved this issue. To get it work:
1. Select checkbox Time Recording and Travel Expenses via CATS for project type. Path: SPRO —> SAP Customizing Implementation Guide —> SAP Portfolio and Project Management —> Project Management —> Structure => Define Project Types
2. Run/schedule a synchronization with the report DPR_CATS_CPR_TRANSF (Transfer of CATS Itemizations to Project Management Application).
Time Recording from a Request for Change to a PPM ProjectTask - Working with Projects - SAP Library
Regards,
Alex

How to get wage type for every time record

Hi Pros,
I am using DS 0CA_TS_IS_1, it includes report time type (0REPTT), but not have wage type. in CATSDB, I fied fields for attendance/absence type and wage type. but not every time record has wage type. can you please tell me how to get wage type for every time record? what is relation between reporting time type, attendance/absence type and wage typs?

Hello,
Can you talk to your HR/T&E functional consultant if they populate these values in CATSDB table using standard way or if there are custom fields that are in CATSDB OR any other table which can be used to meed the requirements
Thanks
Abhishek Shanbhigue

Print out of time stamp ( time recording) in DBM ( using cats)

Hello,
in DBM we use standard time recording, everytime we post time stamp the system prints output of the time stamp
we want to stop it...however is probobly control in HR . Any hints where?
we use cac1 profile
thanks!!!

Mitch_Peplow wrote:
Hi chembo,
I'm not sure if I've misunderstood your answer but currently I'm not writing the time with am/pm anyway, its purely HH:MMS.MS and the data is there in Excel, it's just formatted the cell in an alternative way to what I would like.
Cheers again
Mitch
I was thinking about something like the snipped added below. My version is very simple, but I think that it shows how it can be done. You need to have Excel on your machine. (Disclaimer: This is my very first use of the Report Generation Toolkit in LabVIEW, so maybe there is a better way to do it)
I made the VI labels visible, so that you know what function was used, if the Toolkit is not included in your LabVIEW license. The same thing can be done with ActiveX automation. If you are not familiar with it, there are a lot of examples in the forums about generating Excel files via ActiveX.
Edit: Attached is the Excel file generated from this code
Attachments:
milliseconds.xlsx ‏11 KB

Time recording for Services

Dear All,
The use of time recording tab in the service purchase order. How to use that tab for service beacuse whenever i choose that tab in the service overview system shows the following error"Function not possible with this selection Message no. SE394 .
Regards,
Renuga.A

Hi,
I have looked for information regarding this error and could not find anything. I would suggest that you open a ticket at SAP, as an expert should have a look at your system.
Best Regards,
Arminda Jack

MSS Time Recording for Team

Hello,
We are implementing MSS Time Approval on Portal. And want to add the Employee Group Field to the 2nd screen(i.e the Details screen) as below as a column just like Status and Recorded Time.
Can this be achieved through Configuration or requires Webdynpro ABAP Enhancement. ?
Any help would be highly Appreciated.

se80
PAOC_MSS_TIM_WDA
HRMSS_A_CATS_APPR
This can be done for the detailed screen ie once you click details for the times, for initial screen you need to use the modification as above, Once for times needs to be approved, you can click on Details and add the columns as below for that screen
sm34
VC_PT_FIELD_SELECTION
Screen area CTD CATS Approval: Details
Field selection SLIN SAP Detail Line Managers
You can do the config here, Please check this
SPRO > Personnel Management > MSS (WebDynpro ABAP) > Working Time >
Approve Working Time > Define field selection for detail View
class CL_HRMSS_CATS_APPR_DASHBRD
Time Recording Status for My Team - Manager Self-Service in SAP NetWeaver Business Client - SAP Library

CATS - Time recording dashboard - Missing time issue

Hi Experts,
in CATS the Time Recording Status Report does not show correct number of hours in the missing time column. Please see at the screenshot.
Do you know a solution for this issue? Thanks!
Claudio

This application uses the below FM's in ecc, check it once is it getting for all employees.
CATS_READ_CATSDB
CATS_GET_TARGET_HOURS
And also check the OADP configurations for view MSS_LCA_EE1
This view retrieves the time recording details for the direct reports and all employees.

How can we integrate CATS & PPM and to retrieve CATS time recording data in PPM ?

Dear experts,
Following the previous question of Ruxandra Petrina called "record times with CATS", I am facing an issue with the report DPR_CATS_CPR_TRANSF : it shows nothing despite I activated PPM accounting integration.
There are the steps I followed, I really don't understand what is missing. In PPM I can transfer and assign my projects to WBS elements automatically or manually.
1. We allowed time confirmation for projects
2. We replicated personal number as business partners
3. We activated worklists and project assignments @ data entry profiles
4. We set up ALE & RFC connections
5. We activated the integration scenarios on WBS element : automatic and manual creation of WBS element assigned to PPM elements. Then we set up data profiles for time recording in cat2.
6. We enter times, we released it (approval is not required) + saving
7; We launch the program in SE38 of both ERP or SOLMAN systems : NOTHING appears.
Our goal is to see the times recorded in CATS in the Confirmed work field of PPM.
Can you please help me out with this issue ?
Many thanks in advance.
Best,
Cassoké

Hi Cassoke,
If tasks assigned to a user is not listed in CAT2 worklist, then first we need to ensure that the tasks are displayed in the worklist. So the user confirm the times for the tasks using this list and after that only we should be running the report 'DPR_CATS_CPR_TRANF' to transfer the actual times entered by user in CAT2 to PPM project task.
To integrate CATS with PPM, you need to follow these steps.
Customisations:
1) Enable 'Time recording' for tasks & 'Account integration' in project type
2) Customisation related to 'Accounting integration' to be carried out (either single object / Hierarchical controlling, for testing better to use single object - Internal order, since it is easier)
3) Create a time sheet data entry profile
(Refer thread Record working times with CATS for details)
4) Ensure all object links(internal order / WBS) RFC destinations are updated correctly.
Master data:
Business partners creation with BUP003-Employee role & link to HR personnel number
(This is not required if HR integration is activated, since the system creates the BP's automatically. But manually we need to validate the BP's for linkage with few users)
Project:
1) Create project using customised project type (where time recording/accounting integration is enabled)
2) Structure the project with phase/tasks
3) Update duration/work etc., to the tasks
3) Create project roles & staff a resource (BP which is validated for HR personnel number linkage).
4) Assign task to project role with resource in Project role-->task tab
6) Release the project definition and also check for phase/tasks release
7) Change the status of project definition to 'Flag for transfer' (Can be done before project release also)
8) Check whether the internal order / PS project with WBS is created in ERP system(Based on customisation) and linked to project. Check can be made in accounting tab of the project. (If it is not created, then check for object link RFC destination correctness)
In case of automatic internal order creation process, you need to enter the org unit. data in project definition-->additional data of the project.
CATS:
After completing all the steps, the task assigned to the user will appear in the CAT2 transaction.
1) User can confirm the task with actual hours.
2) Run the CATS transfer report mentioned above to update the data in PPM project.
About SOLMAN integration, you can refer to this presentation also.
http://www.sapsa.se/wp-content/uploads/2013/09/9.-ITPPM@SAPSA_131119_IngoPfeiffer.pdf
Regards,
Ravi

Which backend-system permissions are neccessary for time recording via ESS

Hello,
I'd like to to time recording via ESS and would like to know which permissions/rights a user needs in the portal and the above all of them in the backend system.
Is it neccessary that the User in the backend system is a user of user type Dialog or could this also be an user with another user type?
Thx, Vanessa

Please make sure that the User has ESS authorisation
he needs to have the authorisation like recording times, Normal cats authorisation, please check help.sap.com for which infotypes to be necessary Like 316 etc
You need to maintain the CVR parameter for the profile being
used.

Critical error while trying to call the time record app

Hello,
I just finished to configure ESS and would like to start the time recording.
Unfortunately I can only call the working time in the upper menu and the overview is shown. Pressing now the link to the time recording an critical error with an exception occurs:
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost. Please contact your system administrator.
The current statement requires a character-type data object., error key: RFC_ERROR_SYSTEM_FAILURE
Could someone give me an hint where to start looking for the problem?
Thx you in advance,
   Vanessa
Edited by: Vanessa Martinez on Apr 17, 2009 12:06 PM

The whole exception looks like:
The current statement requires a character-type data object., error key: RFC_ERROR_SYSTEM_FAILURE
The current statement requires a character-type data object., error key: RFC_ERROR_SYSTEM_FAILURE:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: The current statement requires a character-type data object., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.cat.record.blc.RfcManager.rfcExecute(RfcManager.java:468)
     at com.sap.xss.hr.cat.record.blc.RfcManager.init(RfcManager.java:822)
     at com.sap.xss.hr.cat.record.blc.wdp.InternalRfcManager.init(InternalRfcManager.java:248)
     at com.sap.xss.hr.cat.record.blc.FcCatRecordInterface.onInit(FcCatRecordInterface.java:344)
     at com.sap.xss.hr.cat.record.blc.wdp.InternalFcCatRecordInterface.onInit(InternalFcCatRecordInterface.java:234)
     at com.sap.xss.hr.cat.record.blc.wdp.InternalFcCatRecordInterface$External.onInit(InternalFcCatRecordInterface.java:484)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
     at com.sap.xss.hr.cat.record.vac.calendar.VcCatCalendar.onInit(VcCatCalendar.java:251)
     at com.sap.xss.hr.cat.record.vac.calendar.wdp.InternalVcCatCalendar.onInit(InternalVcCatCalendar.java:194)
     at com.sap.xss.hr.cat.record.vac.calendar.VcCatCalendarInterface.onInit(VcCatCalendarInterface.java:162)
     at com.sap.xss.hr.cat.record.vac.calendar.wdp.InternalVcCatCalendarInterface.onInit(InternalVcCatCalendarInterface.java:146)
     at com.sap.xss.hr.cat.record.vac.calendar.wdp.InternalVcCatCalendarInterface$External.onInit(InternalVcCatCalendarInterface.java:222)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:592)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:864)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: The current statement requires a character-type data object., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.hr.cat.general.model.slim.CatsModelSlim.hrxss_Cat_Wd_Record(CatsModelSlim.java:221)
     at com.sap.xss.hr.cat.general.model.slim.Hrxss_Cat_Wd_Record_Input.doExecute(Hrxss_Cat_Wd_Record_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 64 more

Time record approval with ESS/MSS

Hello,
I am new to MSS and I am facing some problems. I would like to get the time approval process started.
The projects are set up with cProjects and then transfered to PS. The WBS-items are taken for the time recording. Now I would like to approve this time recordings.
Unfortunately I don't have an idea what has to be configured to use the uwl:
- I think that I need to customize CATS to use the workflow (but which one)
- and then to configure the UWL in order to get the items...
Is this true?
Navigation through the portal and calling "team" in the MSS-menu an uncaught exception occurs saying that I have to configure infotyp 0008 for the employee I am using. Why do I need to set up the infotyp 0008 in order to see my team?
Calling the application for approval direct leads to the MSS overview.
Could somone bring some light in my darknes and tell me what I have to configure so that the project manager / line manager can see the recorded time that needs to be approved?
Thanks in advance, Vanessa

Thanks ...we would implement both then and I assume that the approve Timesheet application would be under "Team" Workset but when I click on it ..I get the error as:
No Views found: Missing customizing:
java.lang.Exception: No Views found: Missing customizing
     at com.sap.xss.ser.tecl.fc.FcTeamCalendar._checkData(FcTeamCalendar.java:799)
     at com.sap.xss.ser.tecl.fc.FcTeamCalendar._getData(FcTeamCalendar.java:751)
     at com.sap.xss.ser.tecl.fc.FcTeamCalendar.initialReadData(FcTeamCalendar.java:385)
     at com.sap.xss.ser.tecl.fc.wdp.InternalFcTeamCalendar.initialReadData(InternalFcTeamCalendar.java:319)
     at com.sap.xss.ser.tecl.fc.FcTeamCalendarInterface.initialReadData(FcTeamCalendarInterface.java:229)
     at com.sap.xss.ser.tecl.fc.wdp.InternalFcTeamCalendarInterface.initialReadData(InternalFcTeamCalendarInterface.java:294)
     at com.sap.xss.ser.tecl.fc.wdp.InternalFcTeamCalendarInterface$External.initialReadData(InternalFcTeamCalendarInterface.java:382)
     at com.sap.xss.ser.tecl.vc.VcTeamCalendarInterface.initialReadData(VcTeamCalendarInterface.java:362)
     at com.sap.xss.ser.tecl.vc.wdp.InternalVcTeamCalendarInterface.initialReadData(InternalVcTeamCalendarInterface.java:327)
     at com.sap.xss.ser.tecl.vc.VcTeamCalendarInterface.onBeforeOutput(VcTeamCalendarInterface.java:174)
     at com.sap.xss.ser.tecl.vc.wdp.InternalVcTeamCalendarInterface.onBeforeOutput(InternalVcTeamCalendarInterface.java:263)
     at com.sap.xss.ser.tecl.vc.wdp.InternalVcTeamCalendarInterface$External.onBeforeOutput(InternalVcTeamCalendarInterface.java:436)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:603)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:569)
Appreciate your help.

Late Arrival with +tive Time Recording

Hi,
I need a solution for this scenario. I have Positive time recording and i want to apply the following rules on monthly basis.
apply the following rules (within a month)
1st Time Lateness beyond 30 minutes ==> 1 hour deduction
2nd Time Lateness beyond 30 minutes ==> 2 hours deduction
3rd time (and thereafter) Lateness beyond 30 minutes ==> 4 hours deduction
deductions cannot exceed 5 days a month
after that, set the employee on error, so that action from the time administrator will be required.
I need solution for this scenario and need help for write a PCR.
Thanks in advance.

Hi,
I need a solution for this scenario. I have Positive time recording and i want to apply the following rules on monthly basis.
apply the following rules (within a month)
1st Time Lateness beyond 30 minutes ==> 1 hour deduction
2nd Time Lateness beyond 30 minutes ==> 2 hours deduction
3rd time (and thereafter) Lateness beyond 30 minutes ==> 4 hours deduction
deductions cannot exceed 5 days a month
after that, set the employee on error, so that action from the time administrator will be required.
I need solution for this scenario and need help for write a PCR.
Thanks in advance.

CUBE_BUILD_LOG Bug for incorrect Time recording

Hi David ,
Strange enough , I started a cube loading today morning at 12.54 AM but the Time recorded in my CUBE_BUILD_LOG table shows
09-AUG-11 09.04.27.399000000 PM +05:30 .... while my DB sysdate showing below:
select systimestamp from dual ;
09-AUG-11 12.54.27.399000000 AM +05:30
I never have this issue so far for last 1 month but as I observed suddenly today as it is misbehaving . Like to notify the concern . Now I purged my old table and reload the cube after DB bounce and it is recording the time fine .
Regards,
Debashis

Hi David ,
I straighway installed 11g R2 .And only this particular instance I see the issue with the correct datetimestamp reporting which seems strange to me as I load the data on Morning and the record is showing load is going on future timestamp which is obviously impossible . So I mean to say there must be some issue. After I truncate the table I haven't encounter the weird behavior yet but if I am ,will let you know.
Thanks for your suggestion on dopping and building new CUBE_BUILD_LOG . I will keep the info for future use .
select * from v$version;
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE 11.2.0.1.0 Production"
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Describing the table:
desc cube_build_log
Name Null Type
BUILD_ID NUMBER
SLAVE_NUMBER NUMBER
STATUS VARCHAR2(10)
COMMAND VARCHAR2(25)
BUILD_OBJECT VARCHAR2(30)
BUILD_OBJECT_TYPE VARCHAR2(10)
OUTPUT CLOB()
AW VARCHAR2(30)
OWNER VARCHAR2(30)
PARTITION VARCHAR2(50)
SCHEDULER_JOB VARCHAR2(100)
TIME TIMESTAMP(6) WITH TIME ZONE
BUILD_SCRIPT CLOB()
BUILD_TYPE VARCHAR2(22)
COMMAND_DEPTH NUMBER(2)
BUILD_SUB_OBJECT VARCHAR2(30)
REFRESH_METHOD VARCHAR2(1)
SEQ_NUMBER NUMBER
COMMAND_NUMBER NUMBER
IN_BRANCH NUMBER(1)
COMMAND_STATUS_NUMBER NUMBER
BUILD_NAME VARCHAR2(100)
22 rows selected
Rgds,
DxP

How do i pause quick time recording ? having problem after installing maverick

i have been having issue with quick time recording . after installing this Maverick i and no longer able to pause the Recording.
nothing happens when i press the option key.
done any one know the fix
Thanks

Ski Farm,
I hope you are doing well today! The suggestion provided by altenbach is really good. Alternatively, you can also use a global variable and an event or case structure, to pause the execution of a VI. I have attached an example of a subVI, called by the mainVI, which displays the current iterative count of a while loop. Please let us know if you have any other questions. Have a great day!
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies
Attachments:
subVI_false.JPG ‏14 KB
mainVI.JPG ‏26 KB
subVI_true.JPG ‏15 KB

Time Recording in Brazil

Similar Messages

Maybe you are looking for