Time remaining on battery does not include both batteries

I have a T400s running windows 7 with the latest BIOS, Power driver, and Power Manager software.
Each time I unplug the time remaining estimate is accurate for about 5 minutes, and then it drops significantly. As my battery drained, I noticed the remaining time reflected my secondary ultrabay battery only, and not both combined as it had previously.
I have tried to remove my ultrabay battery and reinsert it, but I always get the same behavior. Does anyone know how to configure the display?

curious_and_learning wrote:
Thank you, Jeff! That did it. I understand now that t0 is the first value for every group of data I sampled, and that I should not have assumed the value to increment on its own.
I achieved similar results using the Get Waveform Time Array vi as well.
Glad to help!  (Take a wild guess what the BD of Get Waveform time array.vi looks like) 
Spoiler (Highlight to read)
Jeff

Similar Messages

  • TS2634 Iphone will not charge. the battery does not even show up. Have tried holding down both on/off and enter button at same time

    the battery does not even show up. Have tried holding down both on/off and enter button at same time
    Doesn't appear to have any life. Not that old

    I have tried several plus into the computer itself

  • When the apple review team review our app,they point out that our  app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

    when the apple review team review our app，they point out that our  app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of  trajectory replay come ture。in fact， we have added function when the app  is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when  the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
    the blow is the content of the review team email：
    We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
    We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
    It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
    For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
    If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
    "Continued use of GPS running in the background can dramatically decrease battery life."
    Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
    We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
    For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
    - complete details of your rejection issue(s)
    - screenshots
    - steps to reproduce the issue(s)
    - symbolicated crash logs - if your issue results in a crash log
    If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

    Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

  • Create batch input, does not include all records

    Have anyone experienced, when doing Create Batch Input from the LSMW menu it does not include all rows.
    For example I have a .txt file with 3000 records that I specify in "Specify Files"
    "Read Data"  reads 3000 records.
    "Convert Data" Converts 3000 records
    "Create Batch input Sessions" creates 2461 records? ?
    I have noticed that this happen when the system is busy running many batches and Idocs.

    I'm talking about LSMW programs with regular Batch input Recording.
    I haven't noticed which transactions it skips since I do not run the Batch, when I notice that it does not include all rows as I have read and converted.
    However usually if I "Create the batch input session" once again it includes all the records from the conversion before.
    But since Create a batch input can take a long time depending on the amount of transactions it creates this is not a desired option.
    So it is not possible that the transactions it does not create are errors since its possible to run them successfully. And I haven't used any SKIP TRANSACTION in the mapping step.
    But like I said this only happens when the system is running many batches / idocs at the moment, for example if we are loading the material master at the same time as I run my batch input programs.

  • A JE created from the AP Invoice does not include the project # on all trx

    A JE created from the AP Invoice does not
    include the project # for the amounts entered in the freight box. To
    duplicate, do the following:
    1. Open an AP Invoice
    2. Enter BP Code
    3. Select Service type
    4. Enter a Project Code in drop down box on Accounting tab
    5. Enter a line in the Contents; specify GL Account, amount and Tax
    Code Open Freight box
    6. Enter an amount in one of the lines
    7. Click ADD
    8. Go back to the invoice and go to the Accounting tab Click on the GL
    journal note and you can see that the line corresponding to the
    contents line has a project, but the line corresponding to the Freight
    box item does not.
    My customer users these projects when printing GL agings and the
    information is very important. Shouldn't this information be carried
    forward on all transactions on the Journal entry? Is there a way to get this information to post?

    Hi Pat,
    the project code (PC) on the marketing document may only be applied to the business partner (BP), hence the only row in the associated journal entry (JE) with this project code is that of the BP.
    You can link project codes to specific accounts (CoA -> select account -> account details -> project code) & this project code will then be assigned every time the account is found in a JE.
    If you require the project code to be applied to the freight, you may assign this project code to the account you have defined for this freight. The drawback is naturally that the project code will then  be pulled every time this freight is used, regardless of whether or not the PC is associated with the BP or not.
    It is possible to manually assign project codes to every row in a journal entry, hence this should also be possible with SDK. You might explore the possibility whether it might be possible to automatically assign the BP PC to all rows in the JE using a script.
    All the best,
    Kerstin

  • HRMD_A07 does not include infotype 207 208 and 210.

    Hi Guys,
    The standard message type HRMD_A07 does not include the infotype 207,208 and 210.
    Can some one please tell me how to create the extension and populate that extension with which user exit ? i created a extention but when i generate the idocs the extention does not populate.
    Please explain what am i doing wrong.

    Hi Khan,
    yes the naming is standard sap, if you press F1 at name segment field at we31 you'll see the sap help give you this information, after that you need add the segment name at pm01 to the correspondence infotype and it will populate next time you send it.
    Hope this helps.
    When you test it try to test in PFAL at insert mode to see if it populates first.
    Regards.

  • My new Iphone's battery does not hold charge for long; do you have the same problem?

    Greetings, I had a new iphone 4S -  bought March 2013, died suddenly September 2013. Iphone replaced by a new one, which seemed to work fine. Suddenly, noticed three days ago that the battery does not hold, even for one day, even with very little use. Charged battery yesterday morning, as it was dead, used phone a few times during the day, still had half batery full at bed time; this morning there was no battery at all - had discharged completely overnight doing nothing. Has anyone had this problem?
    It means that I will have to travel a long way to the nearest store to have it looked at. Had already done this last September to replace a dead phone. One would have expected better quality and reliability from a Company like Apple.

    Sounds like the battery needs replacing.  Bring the phone to Apple for battery diagnostics.

  • FB4 Beta2 does not include swz files

    When compiling a release Build, FB4 does not include the smaller swz files but bigger swf files (e. g. framework_4.0.0.10945.swf) instead. The swz files where included only a few time at the beginning of the project.
    I need to finish this project with the 4.0.0.10945 SDK.
    How can I let FB4 Beta 2 include and link to the framework etc. swz files?
    Thanks,
    David

    Hi,
    For the moment I would suggest that you use 'merge into code' rather than runtime libraries. After flashbuilder is released I would assume that the runtime libraries will be available online through Adobe, then it makes sense for applications that are used on a regular basis to use cached libraries, right now everytime you change a build you will also have a new set of libraries to upload/download, along with issues of libraries getting mixed up. SO rather than having to be concerend about a bunch of libraries being stored in the flashplayer cache you only have a single swf to think about.
    David.

  • Battery Icon Shows "18% available (plugged in, charging)" But Battery Does Not Charge

    The PC does operate on the battery only, just fine (so far, as there is only 18% remaining).
    The PC operates with AC plugged in also.
    LED by AC input is amber (looks orange to me).
    According to the User Guide that indicates charging.
    Battery Check status is "OK"
    I have had it on charge for over 12 hours and still at 18%.
    When starting up, the battery icon shows charging movement then stops at a low level.
    I measured the charger output at 20VDC (no load). Which is as specified.
    I have tried all the suggestions about uninstalling and reinstalling  the ACPI Complient Control Method.......etc.
    Removing battery, shutting down and all the rest of suggestions.
    No help.
    I was told there was a BIOS update which I installed. (I'll post about that in another board). No help.
    If I ever get this fixed it's going back to the vendor, Should not have this happen with less than 3 months since new.
    Just got it back from repair for battery latch falling off. (Back plate was changed.)
    Anything new would be appreciated.

    Hi @xdellman,
    Thank you for your query and realize how frustrating this is.
    I gathered from your post you have tried most of the troubleshooting steps to no avail.
    If you check the adapter do you notice any damaged or bent pins as this can cause charging issues?
    Here are two links that may  also assist you.
    HP ENVY and Pavilion Notebook PCs - Battery Does Not Charge
    HP Notebook PCs - Testing and Calibrating the Battery (Windows 8)
    If this has not helped please contact HP support for assistance.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Please let me know the results.
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • The canadien calendar does not include easter holidays and Québec St-Jean-Baptiste

    Why the canadien calendar does not include easter holidays and Québec St-Jean-Baptiste (june 24th) ?
    webcal://ical.mac.com/ical/Canadian32Holidays.ics
    Can Apple add them ?
    webcal://ical.mac.com/ical/Canadian32Holidays.icswebcal://ical.mac.com/ical/Canadian32Holidays.icswebcal://ical.mac.com/ical/Canadian32Holidays.ics

    Hello, David. I apologize for trying to reach you on this particular forum. You posted something about a Mail script for rebuilding all mailboxes quite some time ago (that message thread is now archived, so I couldn't respond in that more appropriate forum). Did you ever get a working script, and would you be so kind as to share it? You can reply to [email protected], to eliminate further out-of-context posts to this forum. Thanks!
    -Dr. G

  • TOC does not include hyperlinks in export to PDF

    I created an eBooklet in Pages, but when I export it to PDF, the TOC does not include hyperlinks to the pages. There aren't any signs of the TOC including links in the original Pages document, either.

    The iWork '09 DVD can be had at Amazon. You will need to apply the Apple IWork 9.3 updater to bring the applications to their last revision, and compatibility with Mavericks and Yosemite. The help menu in Pages ’09 v4.3 has a link to the that specific PDF user guide. The Number '09 guide is there too. The Keynote  '09 PDF User Guide is here.
    Pages v5 documents are not directly backwards compatible with Pages '09. You will need to export the content as Pages '09. Since Pages v5.5.1 is lacking nearly 100+ features that were in Pages '09, you must take care with opening Pages '09 documents in Pages v5. It will filter out content that it does not support (e.g. linked text boxes).
    Any double-click on a Pages document with both applications installed, will default to opening in Pages v5.5.1. Deliberate effort is required to open Pages '09 documents, either by the Pages '09 file chooser, or a two-finger tap (on your Air) to bring up the secondary menu that has Open with > Pages (4.3) on it.

  • MSI Star key 3x fatser, license does not include device !!!

    Dears,
        I have my MSI star key bluetooth device from 1.5 years, it was working perfect on my windows XP SP2. Then I had some problems with my windows, and I wanted to re-install again the driver (after de-installing the current driver) but I found myself getting the following message, when I try to start the bluetooth device:
    "your bluetooth software license does not include use with this bluetooth device. [6]", and when I point out to my CD for the license file, I get this message "Bluetooth software license file not found. [2]".
    I have tried the driver coming with the device CD WIDCOMM version 4.0.1.2101 and was working for more than 1 year, and also I have tried the new driver on http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=131&prod_no=101 WIDCOMM version 4.0.1.2900 several times with lots of combination and nothing is working, the bluetooth is still red and refuse to start.
    I found the same issue is posted too much over the web regarding the WIDCOMM software in general and solution with something as patch I could not find.
    I checked the fixed posting on this forum, but it seems all included URLs in the posting are not working.
    It seems that contacting MSI support is a waste of time. Could anyone provide guidance or help for me.
    Thanks in advance

    Quote
    It seems that contacting MSI support is a waste of time.
    Have you even tried? Visit http://ocss.msi.com.tw, enter your email address and open a new ticket.

  • My I pod touch 5th one month old wont charge. Its on charger for 2 days but battery does not move from red sign?

    My I pod touch 5th one month old wont charge. Its on charger for 2 days but battery does not move from red sign?

    Try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Premiere Pro Project Manager does NOT include After Effects files.

    Warning: Premiere Pro "Project Manager" does NOT include the After Effects 'dynamic linked composition' files associated with the project when "Collect File and Copy to New Location" resulting in the incomplete and loss of all dynamic linked compositions in the new project destination ( folder or disc drive ) .. I know this also includes Photoshop dynamic links and assume includes Audition audio files as well.

    Here's the best way: Personal Responsibility.
    Put all of your project files in one file. Stop asking PPro to do it for you. It's simple. This is a no-brainer. If you create a linked comp, create it in the same file as your PPro project and files. When you send it to Encore, create the Encore project in the same folder. Works all the time, every time. When you're sure that you're finished with the project for the forseeable future, move the entire folder off your workstation into storage. Do I move a copy of each asset (video clip, image, audio, etc.) into this folder before I import it to my AE or PPro project? Yes I do. Is it overly time-consuming? Not really. I can fly on my machine. Does it beat not being able to open a project later. Oh yes. Yes it does. I'd say I did 50 projects last year this way. When I occasionally had to move a project folder back to the workstation, I had no problems. Everything worked as it did before I off-loaded it. That's because I take personal responsibility for my projects. It's imporatnat that theyt work, especially if I end up having to hand it off to a third party down the road.
    BTW, my workstation is RAID 0. If you are using anything less, you need to upgrade. What I'm trying to tell you is that my system works very well. I have not always done things the right way. I have had my share of frustration. The point is that I learned. Now I'm passing that on to you. I use CS5 on an HP Z800 with a measely 12 gigs of ram and a single i7 quad core and the aforementioned RAID 0 configuration and a hacked Nvidia GTS 450. It works quite well. I'm sure I would do even better with another i7, 12 more gigs of ram and a Quadro 4000, but this is what they give me to use.
    Additionally, I'm using CS5 at home on a MUCH older HP xw8200 dual dual Xeons, 12 gigs of ram and software-only MPE. Guess what? It works quite well.

  • Tungsten T3 battery does not hold charge

     My Tungsten T3 battery does not hold a charge. Can any one tell me if I can change the battery. If so where can I find out how to take it apart and where can I get a battery.
    Post relates to: Tungsten T5

    Pdaparts.com has "takeapart videos" for various Palm devices.
    Both usedpdaparts.com and pdaparts.com offer batteries and replacement service.
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Maybe you are looking for