Time reporting in CATS

In the CAT2 transaction what is the way to ensure that the user can report time just for himself and not for anybody else?
I know it must be about some InfoType data, but can not remeber where exactly.
Thank you!

Hi,
first you have to enter the userid in the person's info type 0105 subtype 0001 in TA PA30.
In the authorization rules P_ORIGIN has to be inactivated, and for P_PERNR you have to specify "I".
Regards
Edeltraut

Similar Messages

Time reporting screen - additional fields for clock in/clock

Hi all, I have an issue with time reporting that I would appreciate your help in resolving. We would like to add additional fields for clock in/clock out data from external clocks. I think I saw it somewhere but now I cannot find it in the CAC2 configuration. Can you help? Thanks in advance, Maya

see if following link can help:
Custom field added to CATS but not showing in Data Entry View'

Utilization / Chargeability report in CATS

Is there any Utilization / Chargeability report in CATS.

hi my friend
Time Sheets can be approved using the following transactions:
     CAPS Selection using Personal Data
     CAT4 Selection using Organisational Structure
     CAPP Selection using Time Sheet Data
Transfer Programs:
CAT5 Transfer to PS (RCATSTPS)
CAT6 Transfer to HR (RPTEXTPT)
CAT7 Transfer to CO (RCATSTCO)
CAT9 Transfer to PM (RCATSTPM)
CATM Transfer to MM
CATA Transfer to All Components
Hope above information is what you want
Regards,
Jun

Overriding the default "date-based" restrictions in time reporting

Hi all.
When using CATS/ESS for reporting time on tasks / roles there are some built in date based rules which limits when time reporting is possible.
The cProjects 4.5 (SP05) help describes this as follows for a task-based set-up
The system creates a worklist in CATS to enable you to record your time for a role or task. The system selects all objects (tasks, project roles, or project definitions) to which you are assigned in the confirmation time frame:
If you set up confirmation via tasks, the worklist displays all tasks for confirmation to which your user is assigned by means of a role for the confirmation time frame and which have been released. For the confirmation time frame, the system first checks
the time frame you specified on the Staffing tab page. Then it checks the time frame you specified in the Tasks Assigned to Selected Project Role group box on the Tasks tab page. If you only made entries on one of the tab pages, these apply.
Put differently there is as I understand it a two-step check against the date that the user is trying to report on
a) check against dates in staffing tab of role
b) check against dates in the "tasks assigned to selected project role" tab of the role
The requirement we are looking at now is to make this check a bit more loose. An example could be to say that time reporting is OK as long as the dates lie within the projects scheduled dates.
Any comments / experiences around this? Possible? I assume one would need to try to influence how the worklist is built up.
Best regards / Anders

Hi Anders,
The building up the CATS worklist is done in two side, ERP system and cProject system. Regarding your requirment I think, the logic is done in cProject side, where the logic is hard coded and no Badi to enhance it.
Please see my report in the Wiki to have more details:
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=61926
Kind regards,
Zhenbo

Time reporting in ESS

Hello,
Which is the simplest and fastest way to setup time reporting via ESS-portal?
Are there any nice "short cuts"? We only want the time reporting part in the portal.
The time reorting should then be connected to CATS in the backend system.
Is there any best practice for this? Automatic installation of a standard procedure?
Regards,
Fredrik

Hi FC,
Please refer to this thread
ESS/MSS CATS
Hope this helps.
Cheers,
Sandeep Tudumu

What is the sql query for the real time reports Resource Stats?

Does anyone know what the query is that the real time report tool uses for the Resource Stats page? Trying to develop a custom report that displays similar information that is updated regularly.

Hi,
009 wrote:
Hi Frank,
Just wanted your opinion on the above given SQLI'm not sure I understand it.
I added some more formatting to help me read it:
SELECT      A
,     CASE WHEN LAG(A,1) OVER (ORDER BY A) IS NULL
          OR A=LAG(A,1) OVER (ORDER BY A)
          THEN LAG(B,1) OVER (ORDER BY A)
     END B_LAG
,     B
FROM     (
     SELECT A, B
     FROM
          SELECT '1'A,'Apple' B FROM DUAL UNION ALL
          SELECT '1'A,'cat'B FROM DUAL UNION ALL
          SELECT '2'A,'bat'B FROM DUAL UNION ALL
          SELECT '3'A,'rat'B FROM DUAL UNION ALL
          SELECT '2'A,'yellow'B FROM DUAL UNION ALL
          SELECT '1'A,'pin'B FROM DUAL
     CONNECT BY PRIOR A=B
     ORDER BY A
);What is the purpose of the CONNECT BY in what you have so far?
Is the idea that you will add another CONNECT BY query, using
CONNECT BY b_lag = PRIOR b?
Do you think that will be better than using ROW_NUMBER?
Will it work if (a, b) is not unique?

UCCX 10.5 Real Time Report shows "Not Connected"

Hi,
UCCX 10.5 HA over LAN.
As per the title, RTR shows Not connected for both nodes and no data shown for all reports. all services are In service in both nodes.
Any Ideas?
Regards.

Hi Mohamed,
Are you accessing this via the IE or FF? If so which version?
The Real time reporting on UCCX connects to the RMI port 6999 to pull the information on the Engine. If there are no port blockages or if there are no issues with the browsers, then it is a problem with the configuration files in root holding this information which needs in depth analysis.
A restart of the Engine also should help. I know that everything is IN SERVICE, but I have noticed a lot of issues on UCCX 10.5 when there are stuck calls on the system, it impacts RTR with the midnight stats reset.
The reset of the Engine is bound to clear all the stuck calls in the system and this may be a side effect of the stuck calls on the system especially if the RTR was working before you noticed the problems.
Regards,
Arundeep

Report in cats

Is there any report in CATS for retrival of data of records with all status in CATSDB

Not quite sure with your reqt.. if you want everything CATSDB isn't an SE16N enough? It might also help if you can go through the documentation of the ABAP object class cl_dbsel_cats & its various methods using Tcode SE24. Another Report that could be of some use is RCATS_APPROVE_ACTIVITIES.
~Suresh

Webview not showing real time reports

Hi,
I have a customer with IPCC Enterprise 7.5 and using the Webview for reporting. The Real Time reports are empty although campaigns are running and agents are logged in. The Historical Reports works absolutely fine. I noticed that for the dialer port status report, I had to enable a setting through the registry, according to the following document:
http://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_tech_note09186a00801dc6cf.shtml
I changed that and then the Real Time report for the dialer port status works. Nothing else from the Real Time reports returns any data.
Thank you,
Agelos

We are using only the Outbound option, so it's only for the outbound. It doesn't give me any Real Time report except the dialer port status. It doesn't return any error, but the report is empty.

Down time report

I cannot find where I could change the configuration of gwmon to give me
more than 5 days worth of down time report. Ideally it would be great to set
this to 180 days or more so that we can see how we perform over a long
period of time...
Running on SuSE 9.3
I cannot see any settings that would do that for me in
/opt/novell/groupwise/agents/share/monitor.xml
and
/opt/novell/groupwise/gwmonitor/gwmonitor.cfg
Any suggestions?
Regards,
Sylvain
================================================== =========
Sylvain Phaneuf --- Systems Manager | phone : +44 (0)1865 221323
Information Management Services Unit - Medical Sciences Division
Oxford University | email : [email protected]
Room 3A25B John Radcliffe Hospital | fax : +44 (0) 1865 221322
Oxford OX3 9DU England
================================================== =========

Sylvain,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

New column in Time report

Hi expertes,
It´s been my first contact with time management and i hope you can bring some light to this issue.
I would like to see in my time report the "flextime" hours. should i use pe51 to edit and manage the existing form?
How can i link my time report ( rptime00 ) with my form once the changes are done?
Thanks a lot.
KR.

As per my knowledge Best way you have to design the "SMART FORM" for PE51 & time report ( rptime00 ) take help of Abap
MHPO

UCCX 7 (SR4) - real time reporting based on option choosed

hello,
i would like to extract real time information on wich option the client choosed on my uccx7 script. I know where to get in the database some info from the queues (Summary Tables), and i would like to make some custom real time reporting based on wich option was choosed to know how many callers choosed the voicemail option (so the call won't show up as abandoned).
Is there any way to get real time info from a custom variable in real time? in wich table?
thank,
met.

IVR selections are not recorded within the CCX databases. You would need to save this to an external database and report from there. Your only method of capturing this within db_cra would be to store a value into an enterprise data variable which can be seen on historical reports.
Also, the only tables that are "real time" are those identified as such: RtCSQsSummary and RtICDStatistics for use by wallboard applications.

UCCX 9.0 real-time reporting

Hi,
I need information about UCCX 9.0 real-time reporting. What are the real time reports available on UCCX 9.0.
How to run this real time reports.
Regards,
Dinesh Joshi

Hi Dinesh
It's similar stuff to what you get in the Historical Reports - e.g. number of contacts, abandons, available agents, state of agents etc etc but counted up for that day and shown in real time. They're very basic looking tabular data type report generally, Supervisor can do some basic charts but nothing exciting and they aren't designed to be exporable.
Is there something specific you are looking for?

ScheduleTracking_AddIn: Error installing Outlook 2010 add-in for time reporting in calendar

Hi,
I am not sure that this is the correct forum for my question... it’s not obvious where to post.
I was looking for solutions for keeping track of calendar entries in Outlook 2010 and came across a
sample add-in contributed here:
http://msdn.microsoft.com/en-us/library/hh144973(v=office.14).aspx
The add-in has to be built using Visual Studio 2010 – which I do not have – and I was not able to load the project in Visual Studio 2010 Express.
The author of the code posted an update here
http://blogs.msdn.com/b/officedevdocs/archive/2011/07/20/starting-the-time-reporting-outlook-add-in.aspx where he provided an installation package for the add-in for users who do not have Visual Studio 2010.
The installation instructions warn to expect a dialog box displaying “Publisher cannot be verified. Are you sure you want to install this customization” and that installation can be made to proceed. I am getting the following message, instead:
Customized functionality in this application will not work because the certificate used to sign the deployment manifest for ScheduleTracking_AddIn or its location is not trusted.
Contact your administrator for further assistance.
Is there a system setting under Windows 7 to work around this? I can’t continue with installation.
Thanks,
Ross

Hi Steve,
Your suggestions were very useful! Now that I understand the problem I was able to find the right information.
The following link proved most useful:
http://blogs.msdn.com/b/vsod/archive/2012/10/08/troubleshooting-common-vsto-issues-part-2.aspx
The solution proposed in Common Error 3 solved my problem.
I have one point for others who come across this same security issue. The full error message that I obtained was:
Name: ScheduleTracking_AddIn
From: file:///C:/Temp/Time_Reporting/ScheduleTracking_AddIn.vsto
************** Exception Text **************
System.Security.SecurityException: Customized functionality in this application will not work because the certificate used to sign the deployment manifest for ScheduleTracking_AddIn or its location is not trusted. Contact your administrator for further assistance.
   at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInTrustEvaluator.VerifyTrustPromptKeyInternal(ClickOnceTrustPromptKeyValue promptKeyValue, DeploymentSignatureInformation signatureInformation, String productName)
   at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInTrustEvaluator.VerifyTrustUsingPromptKey(Uri manifest, DeploymentSignatureInformation signatureInformation, String productName)
   at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.VerifySecurity(ActivationContext context, Uri manifest, AddInInstallationStatus installState)
   at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()
The Zone of the assembly that failed was:
MyComputer
The last line is misleading as it suggests that Inclusion List Security setting needs to be configured for the
MyComputer zone, since installation was from a local drive. However, doing so did not resolve the issue. I had to enable the
Internet zone to install the add-in.

Not able to run Real Time Report(Live report)

Hi all,
I am working on a report which need to be run on real time, i am facing difficulty while running it at my end(India),
getting error as View Display Error whereas my counterpart in United States running at her end getting the result easly,
server is located at United States,we share the same internet speed,I tried different means by putting appropriate filter
in order to reduce the data size but still couldnt see any result. Can anyone please suggest me what is the issue
and what need to be done in order to get the results for real time report faster at my end.
Thanks for help.

A couple of suggestions.
First, make sure you are reproducing the report conditions as well as the user access settings. Different user access can make a big difference in report performance.
Second, enter an SR with Oracle support. They may be able to help troubleshoot connection issues.
When we see dramatically different response times in different locations, this usuallly means a network issue. It may not be in your corporate network, but somewhere between you and the data center.

Time reporting in CATS

Similar Messages

Maybe you are looking for