Time reporting in ESS

Hello,
Which is the simplest and fastest way to setup time reporting via ESS-portal?
Are there any nice "short cuts"? We only want the time reporting part in the portal.
The time reorting should then be connected to CATS in the backend system.
Is there any best practice for this? Automatic installation of a standard procedure?
Regards,
Fredrik

Hi FC,
Please refer to this thread
ESS/MSS CATS
Hope this helps.
Cheers,
Sandeep Tudumu

Similar Messages

  • Overriding the default "date-based" restrictions in time reporting

    Hi all.
    When using CATS/ESS for reporting time on tasks / roles there are some built in date based rules which limits when time reporting is possible.
    The cProjects 4.5 (SP05) help describes this as follows for a task-based set-up
    The system creates a worklist in CATS to enable you to record your time for a role or task. The system selects all objects (tasks, project roles, or project definitions) to which you are assigned in the confirmation time frame:
    If you set up confirmation via tasks, the worklist displays all tasks for confirmation to which your user is assigned by means of a role for the confirmation time frame and which have been released. For the confirmation time frame, the system first checks
    the time frame you specified on the Staffing tab page. Then it checks the time frame you specified in the Tasks Assigned to Selected Project Role group box on the Tasks tab page. If you only made entries on one of the tab pages, these apply.
    Put differently there is as I understand it a two-step check against the date that the user is trying to report on
    a) check against dates in staffing tab of role
    b) check against dates in the "tasks assigned to selected project role" tab of the role
    The requirement we are looking at now is to make this check a bit more loose.  An example could be to say that time reporting is OK as long as the dates lie within the projects scheduled dates.
    Any comments / experiences around this?  Possible?  I assume one would need to try to influence how the worklist is built up.
    Best regards / Anders

    Hi Anders,
    The building up the CATS worklist is done in two side, ERP system and cProject system. Regarding your requirment I think, the logic is done in cProject side, where the logic is hard coded and no Badi to enhance it.
    Please see my report in the Wiki to have more details:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=61926
    Kind regards,
    Zhenbo

  • UCCX 10.5 Real Time Report shows "Not Connected"

    Hi,
    UCCX 10.5 HA over LAN.
    As per the title, RTR shows Not connected for both nodes and no data shown for all reports. all services are In service in both nodes. 
    Any Ideas?
    Regards.

    Hi Mohamed,
    Are you accessing this via the IE or FF? If so which version?
    The Real time reporting on UCCX connects to the RMI port 6999 to pull the information on the Engine. If there are no port blockages or if there are no issues with the browsers, then it is a problem with the configuration files in root holding this information which needs in depth analysis.
    A restart of the Engine also should help. I know that everything is IN SERVICE, but I have noticed a lot of issues on UCCX 10.5 when there are stuck calls on the system, it impacts RTR with the midnight stats reset.
    The reset of the Engine is bound to clear all the stuck calls in the system and this may be a side effect of the stuck calls on the system especially if the RTR was working before you noticed the problems.
    Regards,
    Arundeep

  • Hiding custom column in Weekly view of the Time Entry in ESS

    We have added a custom field to time entry (CAT2). This field is displaying in both (weekly and daily) view of the time entry screen in ESS. Our requirement is too display the field only in daily view.
    Is there a way to hide the custom column in the weekly view of the time sheet in ESS?
    Thank you,
    Rohit

    well it would require modification to the iview , it wont be a easy quickfix cause you lauch the iview it is built using CAC2 field customisation
    you can explore Personalisation for the daily view hope it can work!

  • Unable to access the Time Statements in ESS Portal

    The user is getting a critical error(com.sap.pcuigp.xssfpm.java.FPMRuntimeException) when trying to access his time statements from ESS portal. The user recently moved to a different country and trying to access statement there. Are there any country specific paramaters that are needed to be changed or set when a employee is reallocated?
    Please help me.

    Hi Rafi,
    We are also facing similar kind of issue.
    When i select type of leave as annual it is giving an error message as
    " Parameter  missing in call of method BUILD_ACTOR_SELECT_CLAUSE in class CA_PT_REQ_ACTOR "
    But when i select some other leave type and click review it is working fine, again if i click on previous step and change the leave type to annual it is working fine without giving any error message.
    Please let us know how you have solved your issue?
    Thanks.
    -Suresh

  • Dropdown Custom Field in CATS Time Sheet in ESS

    I have added a custom field in CAT2 transaction with drop down values from the custom table.  When I log on to ESS I was not able to see the dropdown in timesheet for that field. I am able to configure the field to have a search help dialog box.
    Let me know how can I configure the field to show dropdown values in time sheet in ESS? Appreciate your replies.
    Thank you,
    Rohit

    check CL_XSS_CAT_VALUE_HELP*
    or
    use implicit enhancement of CL_Xss_cat_value_help_general for the purpose
    build_f4_help Method in the class CL_XSS_CAT_RFC_COMMAND_TOOLS.
    or note 914125 on how to get different helps
    The table TCATS_SHLP_ITS also can be explored

  • Webview not showing real time reports

    Hi,
    I have a customer with IPCC Enterprise 7.5 and using the Webview for reporting. The Real Time reports are empty although campaigns are running and agents are logged in. The Historical Reports works absolutely fine. I noticed that for the dialer port status report, I had to enable a setting through the registry, according to the following document:
    http://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_tech_note09186a00801dc6cf.shtml
    I changed that and then the Real Time report for the dialer port status works. Nothing else from the Real Time reports returns any data.
    Thank you,
    Agelos

    We are using only the Outbound option, so it's only for the outbound. It doesn't give me any Real Time report except the dialer port status. It doesn't return any error, but the report is empty.

  • Time reporting screen - additional fields for clock in/clock

    Hi all, I have an issue with time reporting that I would appreciate your help in resolving. We would like to add additional fields for clock in/clock out data from external clocks. I think I saw it somewhere but now I cannot find it in the CAC2 configuration. Can you help? Thanks in advance, Maya

    see if following link can help:
    Custom field added to CATS but not showing in Data Entry View'

  • Down time report

    I cannot find where I could change the configuration of gwmon to give me
    more than 5 days worth of down time report. Ideally it would be great to set
    this to 180 days or more so that we can see how we perform over a long
    period of time...
    Running on SuSE 9.3
    I cannot see any settings that would do that for me in
    /opt/novell/groupwise/agents/share/monitor.xml
    and
    /opt/novell/groupwise/gwmonitor/gwmonitor.cfg
    Any suggestions?
    Regards,
    Sylvain
    ================================================== =========
    Sylvain Phaneuf --- Systems Manager | phone : +44 (0)1865 221323
    Information Management Services Unit - Medical Sciences Division
    Oxford University | email : [email protected]
    Room 3A25B John Radcliffe Hospital | fax : +44 (0) 1865 221322
    Oxford OX3 9DU England
    ================================================== =========

    Sylvain,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Custom Reports for ESS/MSS ?    with PNP??

    I am trying to create a custom report for ESS, and am unsure if I can use the PNP logical database in this code.  I am concerned that if the associate does not have access to see those infoytpes in production, then they would not be able to see their own data from those infotypes in ESS. 
    Can anyone offer their opinion?  Thank you!!!!

    Hi Subash,
    This would be the case.As the J2EE version with ECC6.0 is 7.0 and we need to apply the BP to both ECC and EP.
    Try to think , how do you balance EP6.0 with 6.40 J2EE engine <-> ECC6.0 with 7.0 J2ee engine? will get the answer!
    Regards,
    Surya

  • New column in Time report

    Hi expertes,
    It´s been my first contact with time management and i hope you can bring some light to this issue.
    I would like to see in my time report the "flextime" hours. should i use pe51 to edit and manage the existing form?
    How can i link my time report ( rptime00 ) with my form once the changes are done?
    Thanks a lot.
    KR.

    As per my knowledge Best way you have to design the "SMART FORM" for PE51 & time report ( rptime00 )  take help of Abap
    MHPO

  • UCCX 7 (SR4) - real time reporting based on option choosed

    hello,
    i would like to extract real time information on wich option the client choosed on my uccx7 script. I know where to get in the database some info from the queues (Summary Tables), and i would like to make some custom real time reporting based on wich option was choosed to know how many callers choosed the voicemail option (so the call won't show up as abandoned).
    Is there any way to get real time info from a custom variable in real time? in wich table?
    thank,
    met.

    IVR selections are not recorded within the CCX databases. You would need to save this to an external database and report from there. Your only method of capturing this within db_cra would be to store a value into an enterprise data variable which can be seen on historical reports.
    Also, the only tables that are "real time" are those identified as such: RtCSQsSummary and RtICDStatistics for use by wallboard applications.

  • UCCX 9.0 real-time reporting

    Hi,
    I need information about UCCX 9.0 real-time reporting. What are the real time reports available on UCCX 9.0.
    How to run this real time reports.
    Regards,
    Dinesh Joshi                  

    Hi Dinesh
    It's similar stuff to what you get in the Historical Reports - e.g. number of contacts, abandons, available agents, state of agents etc etc but counted up for that day and shown in real time. They're very basic looking tabular data type report generally, Supervisor can do some basic charts but nothing exciting and they aren't designed to be exporable.
    Is there something specific you are looking for?

  • ScheduleTracking_AddIn: Error installing Outlook 2010 add-in for time reporting in calendar

    Hi,
    I am not sure that this is the correct forum for my question... it’s not obvious where to post.
    I was looking for solutions for keeping track of calendar entries in Outlook 2010 and came across a 
    sample add-in contributed here:
    http://msdn.microsoft.com/en-us/library/hh144973(v=office.14).aspx
    The add-in has to be built using Visual Studio 2010 – which I do not have – and I was not able to load the project in Visual Studio 2010 Express.
     The author of the code posted an update here
    http://blogs.msdn.com/b/officedevdocs/archive/2011/07/20/starting-the-time-reporting-outlook-add-in.aspx where he provided an installation package for the add-in for users who do not have Visual Studio 2010.
    The installation instructions warn to expect a dialog box displaying “Publisher cannot be verified. Are you sure you want to install this customization” and that installation can be made to proceed. I am getting the following message, instead:
    Customized functionality in this application will not work because the certificate used to sign the deployment manifest for ScheduleTracking_AddIn or its location is not trusted.
    Contact your administrator for further assistance.
    Is there a system setting under Windows 7 to work around this? I can’t continue with installation.
    Thanks,
    Ross

    Hi Steve,
    Your suggestions were very useful! Now that I understand the problem I was able to find the right information.
    The following link proved most useful:
    http://blogs.msdn.com/b/vsod/archive/2012/10/08/troubleshooting-common-vsto-issues-part-2.aspx
    The solution proposed in Common Error 3 solved my problem.
    I have one point for others who come across this same security issue. The full error message that I obtained was:
    Name: ScheduleTracking_AddIn
    From: file:///C:/Temp/Time_Reporting/ScheduleTracking_AddIn.vsto
    ************** Exception Text **************
    System.Security.SecurityException: Customized functionality in this application will not work because the certificate used to sign the deployment manifest for ScheduleTracking_AddIn or its location is not trusted. Contact your administrator for further assistance.
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInTrustEvaluator.VerifyTrustPromptKeyInternal(ClickOnceTrustPromptKeyValue promptKeyValue, DeploymentSignatureInformation signatureInformation, String productName)
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInTrustEvaluator.VerifyTrustUsingPromptKey(Uri manifest, DeploymentSignatureInformation signatureInformation, String productName)
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.VerifySecurity(ActivationContext context, Uri manifest, AddInInstallationStatus installState)
       at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()
    The Zone of the assembly that failed was:
    MyComputer
    The last line is misleading as it suggests that Inclusion List Security setting needs to be configured for the
    MyComputer zone, since installation was from a local drive. However, doing so did not resolve the issue. I had to enable the
    Internet zone to install the add-in.

  • Save & Release of Time Sheet in ESS.

    Hi all,
    The requirement is to provide two options after reviewing the time sheet in ESS, first one as per standard 'SAVE' which will save the time sheet (then employee will release later) and second one is customized one 'SAVE & RELEASE' which will save the timesheet as well as release it on a single instance.
    Tried with profile in TCATS Table (Release while Save), but it releases the time sheet on both options.
    Then created a custom RFC calling both SAVE and RELEASE RFCs subsequently.
    But that is also not working.
    So, if any of you came across similar issue. Please guide me on solving this.
    Thanks,
    Nathan.S

    Hi Siddhartha,
    First thanks a lot for your reply.
    But our requirement is to provide two buttons one for 'SAVE' and another for 'SAVE & RELEASE' in same page.
    Is it possible to achieve this?
    Thanks,
    Nathan.

Maybe you are looking for