Time reporting screen - additional fields for clock in/clock

Hi all, I have an issue with time reporting that I would appreciate your help in resolving. We would like to add additional fields for clock in/clock out data from external clocks. I think I saw it somewhere but now I cannot find it in the CAC2 configuration. Can you help? Thanks in advance, Maya

see if following link can help:
Custom field added to CATS but not showing in Data Entry View'

Similar Messages

Additional Fields for Report FBL1

Dear All
I need to add User Name field (USNAM) and few other fields to the layout for report FBL1(Vendor open line items).
I have added the field USNAM under "Define Additional Fields for Line Item Display". But the field is still not showing up for selection in the report FBL1.
Pls advice.
Rgds
Nitika

Hi Nikita,
Once you have added special filed you have to run the below mentioned program to extend the new filed in FBLxN report.
Run below program from SE38:
RFPOSXEXTEND
BALVBUFDEL
The correct way to fix this is mentioned in SAP note 984305. Running report BALVBUFDEL resets the buffer.
The special field is now available in the layout selection.
Hope this helps.
Pls assign points as way to say thanks

Define Additional Fields for Line Item Display

Dear gurus,
I'd like to ask for your help again, please. I've just added the field BKPF-USNAM to the list of fields of FBL1N using IMG:" Financial Accounting-> Accounts Receivable and Accounts Payable->Vendor Accounts->Line Items-> Display Line Items->Define Additional Fields for Line Item Display". When I run the report the field is correctly displayed but if I save the current layout and set it into the selection screen, the column appears is blank. And if I open the change layout window and click OK the column gets filled.
Is there another transaction that I must set new columns to FBL1N.
Thank you very much.
Paresh Jivani
Edited by: Jivani Paresh on Jul 31, 2009 9:16 AM

Hii,
When you will execute FBL1N, it will come up in standard format. if you want to see any specific fields,then you have to go to Change Layout button and choose from available fields as per your requirement and then execute.
For future reference, you can save this layout as a Variant and then you can directly execute that report using that variant.
Dhara D.

Additional Fields for ESS-Business Card Not Working for Certain Countries

Dear Experts,
We were trying to configure the additional fields to be displayed in Business Card - Overview Screen for all countries. We don't have problem configure and get the new fields display for Malaysia (Molga = 14) but having problem for the field to display for Hong Kong (Molga = 27) and Singapore (Molga - 25).
The strange thing is I am following the same steps as I configured for Malaysia. Somehow it is not working for Hong Kong and Singapore. As I understand, there is only 1 place to configure in SPRO for this requirement:
Personnel Management -> Employee Self-Service -> Service-Specific Settings -> Own Data -> Customizing of Personal Information Screens -> Determine Fields for Business Card on Overview Screen
Please help!

Hi Siddhart,
Thank you for the information. We are currently in EhP3 with below Support Components installed.
Software Component: SAP_HR
Release: 600
Level: 60
Highest Support Package: SAPKE60060
Software Component: EA-HR
Release: 603
Level: 34
Highest Support Package: SAPK-60334INEAHR
The note 1159911 provided is within SAPK-60304INEAHR. Thus, I don't think this is the root cause of this inconsistency base on the Highest Support Package installed in our system.
Anymore hint? Anyone? Please...

Additional fields for line item display for Vendor Accounts

Hi,
The additional fields for line item display have been defined for the vendor accounts. I am able to see the additional fields in SAP 4.7 system but not in ECC 6.0.
Could you help me to know how the same will be displayed in ECC 6.0 system.
Thanks

In SPRO, Vendor Accounts -> Line Items -> Display Line Items -> Define Additional fields for Line item display, the fields for Check number from (PAYR-CHECF) and Tax Jurisdiction (BSEG-TXJCD) have been defined.
When I am executing Vendor Line Item display (FBL1N), I am not able to select these fields for defining a layout. Could you please let me know, how I will get these fields in FBL1N.
Thanks

Additional Fields for Substitution

Dear friends
Is it possible to add additional fields for substitution in OBBH.
When I checked in OBBH I didnt find the Document type in the available list.
I want to substitute document type for each profit center wise for each transaction.
Regards
Kiran A

Hi kiran kumar,
For your requirement that field not available in header level in substitution so first we have to get that field through this way
If you want Document type BKPF-BLART - in header level .
Go to SM30 there Give Program name VWTYGB01 select maintain button.
There select the table BKPF and field names BLART and remove the check box exculde flag for those fields.
Now check that field is availabel in header level at OBBH
May be this information is useful to you
If you have any doubt feel free to ask
Regards
Surya

Additional Fields for Rollup Ledgers

Additional Fields for Rollup Ledgers
Does anybody know how to add customer fields into a rollup ledger?
Thanks in advance!

Hi,
try OXK3
Thanks
Aravind

Sales Analysis Report Additional Field for viewing

Good Day Experts!
Is it possible for us to display an additional field to be viewed in Sales Analysis Report?
I'm talking about a vacant field from BP Master data, and somehow append it into form settings and put it into the report?
Is there any store procedures that we can look for prior to this matter? Our client need something more on that particular issue.
Thank you very much

Hi Elmar,
It is not possible to add field on SAP sales analysis report , but you can create report based on query with required fields.
Check http://wiki.sdn.sap.com/wiki/display/B1/D-SLSalesARModuleSQLPostedto+Wiki link for some sales queries , it might help you.
Thanks,
Neetu

Code for Query Report as additional field

I need a field in query report which has a simple join of VBUK & LIKP.
Can't increase join of LIPS as the report changes to item level which I don't want.
My additional field formula will be VBAP-NETPR X LIPS-LFIMG
Where
VBAP-VBELN = LIPS-VBELV &
VBAP-POSNR = LIPS-POSNV
Again where
LIPS-VBELN = VBUK-VBELN
Simply to say, my query build to generate Delivery Report which billing not complete. And within that report I want to bring Sales Order Rate * Delivery Qty.

Dear Sir (Mr.J.R.Kavala),
I'm really appreciate your effort and thanks for your reply. The report almost done with your coding, but may be it is my fault that I couldn't clearly elaborate what I exactly I wanted.
According to your code the result brings only 1st lines result ($ 1,500) from LIPS, but the result should be sum up for all the line item instead, that is ($ 25,750). I've tried to make the scenario below for your understand.
So where should I change the coding if you please advice. Many thanks again in advance.
Zaied
====

Designing additional fields for CATS

Hi,
I want to add additional fields to CATSDB , but my question is whether the field name can be modified as per requirement and whether we can have list of values against these fields ?
Regards,
Ayesha

Hi Ayesha,
Yes you can add the fields to CATSDB,
1. You need to add the desired field at CI_CATSDB Include.
2. After that assign the field to the "Additional Fields" in the IMG and then to the profile.
Yes you can have list of values to your field once you create the zfield's you have to create Data elements and domains for that, if you want the default list of values you need to maintain at Domain level in Further Characteristics.
Regards,
Mohsin.

Additional field for Material Master of SRM

Hi,
We want to add 3 additional fields to the product master table of SRM. We do not want to use these additional fields on any documents (neither SC nor PO nor contracts etc). We do not want to display these additional fields on Enterprise Buyer screens.
What we want is, after adding these fields to the products table we want to edit the values on COMMPR01. Is it possible to see and edit these additional fields with txn COMMPR01? If not how can we edit these fields?
Thanks
PS: the fields that we want add are: New category name (other than the EBP category), New material code (other than the regular material number), Country Name (we have 2 backend systems, we want to keep the name of the country of the backend).

Hi,
How can I do that?
I have 2 fields to reply to COMMPR01:
MARA-ZZCOD_CORP (Customer Field)
MARC-EKGRP
Any ideia to reply this with standard process?
Thanks,
Pedro

Any way to update additional fields for SDLS with equipment at serial no cr

Dear all,
In the serializing procedure SDLS in the serial no profile
there is an option to create equipment alongwith serial no
creation. Currently it is updating only customer no into the
equipment master .
Is there any way to update additional fields into the equipment
master at the time of serial no capture ?
regards
Magi

I think basically the answer is no, and even if you could I don't think it would help you much. A virtual machine error is exactly that, an error in the VM, not your code. The only thing I can suggest is that, if you want to see if your app is falling over in the same place every time, you use something like log4j.

Creating an additional field for a query

Hi All,
making an infoset for a query, I've created an additional field. Its value must be equal to BSET-BUKRS + BSET-BELNR.
I've set my additional field format like C.
Could anyone advice me about the coding for the additional field to get it equal to BSET-BUKRS + BSET-BELNR?
Thanks

Hi,
CONCATENATE BSET-BUKRS BSET-BELNR INTO #name of your field#.
Regards,
Eli

Additional fields for InternalOrder IDOC

Hello,
We try to distribute internal orders with ALE to several clients. The distribution of the internal order IDOC works fine with "InternalOrder.SaveReplica".
Here the problem: We have some additional fields which should be attached to every IDOC. Unfortunately we don't know how to add the additional fields to this IDOC type. It doesn't work the same way as for other IDOC Types (WE30 and WE31) because the Internal Order IDOC is a generated IDOC type.
Is there someone who can give us some help?
Best regards
Stefan Blaser

Hi,
What do you mean by ?
The problem is the Zsegment is not visible with in exit EXIT_SAPLEINM_002.
You will have to write the code in exit to populate the segment and add it in the Idoc.
Check in SE11 if the dictionary structure created for the segment is active. Also, if the segment is released in WE31.
KR Jaideep,

How can we restrict the sub-screen input field for particluar country?

Hi all i am having infotype 21 maintained with custom fields for sub-screen 200.
Out of that custom fields(City , District) They restricted city field not to appear for australian employees.
and district is sucesfully appearing .
They have written logic in the sub-screen 200 in PBO.this is reflecting in alll sub-types of 21(alomst 20 subtypes)
module abc_output.
If T001P-MOLGA = 'australia'.
if screen name = 'city'.
screen-input = 'OFF'.
screen-invisible = 'ON'.
endif.
endif.
Now the requirement is that this logic should be modified such that this city should appear in 7 sub-type instead of district.
what should be written can any one guide please .
regards
sas

Hi we can do in this way.
If T001P-MOLGA = 'australia'
if p00021-subty ne '7'.
if screen name = 'city'.
screen-input = 'OFF'.
screen-invisible = 'ON'.
endif.
endif.
if p0021-subty = '7'.
if screen name = 'district'.
screen-input = 'OFF'.
endif.
endif.
Thanks and closing the thread
regards
sas

Time reporting screen - additional fields for clock in/clock

Similar Messages

Maybe you are looking for