Time required to install GTS 7.2

Dear BASIS,
Kindly let me know what is the time required to install GTS 7.2.
OS:Sun solaris
Database: Oracle 10g
Ram:15 GB
Harddisk 150 GB
KIndly let me know your Suggessions.
Thanks & Regards
Prasanth

Hi,
Please tell me the time required to install GTS 7.2(only installation part and not configuration time).
Thanks for your help.
Regards
Prasanth

Similar Messages

How to restore from Time Machine WITHOUT install discs using a second Mac

It's a question that is asked repeatedly all over the web by Mac users like me that bought in to Time Machine (TM) on the assumption that if their computer died one day it would be a piece of cake to restore from it, only for that day to come and then to be told "ahh, okay the first thing is to get your computers install discs..." (loud crashing sound of world falling around ears).
I've never been able to afford a new Mac and both of my machines were bought second-hand. Neither came with Leopard (both have Tiger and have been upgraded to Leopard via the net). This was never supposed to be a problem as I've been backing up with TM. However it appears that Tiger discs are as much use as an inflatable dart board when it comes to using TM. So I've been faced with the possibility of having to spend £130 (about two hundred Pres Sheets, Yankees) on the Leopard install discs just so that I can have the option of restoring from TM. Bonkers.
However after much nashing of teeth, a very long weekend learning all sorts of things about 'Target Mode', 'Single User Mode', 'Verbose Mode', 'Open Source 9' etc the following solution has worked without the need to go out and buy those over-priced discs...
What you will need:
1 broken Mac requiring restoration
1 second donor Mac running Leopard (or Snow Leopard so long as the broken Mac can run it)
1 firewire cable with the correct fitting at either end to attach both Macs together
1 Time Machine backup
Note: The following is for when you have given up trying to boot from your hard drive. In my case I couldn't boot in to Safe Mode etc. so was forced to format my drive and re-import everything. If you've read this far I'm assuming your at the same point as well and have tried everything else that's out there first.
Also - both my Macs are Power PC's so can't run Snow Leopard, so I can't say 100% this will work with SL (Intel) machines. From what I've read Snow Leopard will work with this procedure too, but if you've found differently please feel free to add your experiences below...
STEP ONE: Format the corrupt Hard Drive or replace with a fresh HDD
*Link the two computers with a firewire.
*If you're replacing your HDD, remove your corrupted hard drive from the 'broken' machine and insert a new one.
*Power up the broken Mac whilst holding down the 'T' key. This will start it up in Target Mode and you'll get a nice firewire symbol floating around that machine's screen.
*Power up the second 'healthy' Mac. This will be our 'donor' machine. When it starts up after a few seconds you will see the hard drive of the broken Mac appear on the donor Mac's desktop.
*Using your donor Mac's 'Disc Utility', format the broken Mac's hard drive (now's the time to partition it etc. if you want to).
STEP TWO: Clone your donor Mac
Your broken Mac is no longer broken and now needs a new OS. But you don't have the discs, right? Well get this... you can clone your donor mac on to your machine, even if they are totally different i.e. a laptop on to a tower.
*Again using Disc Utility, click on your donor Mac's hard drive. The restore tab appears as an option.
*Click on restore and drag the donor Mac's hard drive that contains the operating system in to the Source box.
*Drag the newly formatted hard drive on the broken Mac in to the Destination box.
*Click restore. Your donor Mac's hard drive will now be 'cloned' on to your no-longer-broken Mac. Once this is done, eject the first Mac's hard drive from your donor Mac's desktop. You no longer need the donor Mac.
Ta daa! Your machine now starts up happy and smily again. Time to restore all that stuff that's been sat on your Time Machine drive...
STEP 3: Restore from Time Machine using Migration Assistant
This is the really clever part that prompted me to write this piece in the first place. Time Machine IS accessible without those Leopard install discs you don't have. You need to use something called 'Migration Assistant'.
*Start up your machine as normal and you'll see it is an exact clone of the donor machine. Weird huh?
*Attach your Time Machine hard drive. It will show up as an icon on the desktop and because of it's size, you'll be asked if you want to use it as a Time Machine backup. Err, NO YOU DON'T! Click 'cancel'.
*Open Migration Assistant (if you can't find it just type it in to Finder and click). There are three options, the middle one being to restore from TM or another disc. Yup, you want that one.
*Migration Assistant will now ask you what you want to restore in stages, firstly User Accounts, then folders, Apps etc. It will even import internet settings
And that's you done. Let Migration Assistant do it's thang... altogether I had about 140gb to restore, so it wasn't exactly speedy. This wasn't helped by the fact that my TM hard drive is connected via USB (yes, I know). Just leave it alone and it'll whirr happily away...
Before I go - you don't have an option of when to restore from, and will restore from the last Time Machine save. At least then you should be able to access TM and go 'backwards' if you need to.
Also - for a Mac expert, the above will be up there with 'Spot Goes To The Farm' in terms of complexity. However, for the rest of us the above is only available in fragments all over the net. By far the most common response to 'how do I restore from Time Machine without install discs' is 'you can't'. If I'd found the above information in one place I could have saved a lot of hair pulling and swearing over the last couple of days, so forgive me for sharing this workaround with the rest of the world. Meanwhile your expertise will come in very handy for the inevitable questions that will get posted below, so please feel free to help those people that won't be sure if this solution is the right one for them. I'm no expert, I just want to help people that were stuck in the same situation (and looking at the web, there's a LOT of them).
Hope this is of use to someone, thanks and *good luck*!

Most maintenance and repair, restore and install procedures require the use
of the correct OS X install DVD; be it an original machine-specific restore/install
disc set or a later retail non-specific general install disc set.
By having an unsupported system, perhaps installed via an illegal download or
other file-sharing scheme, where no retail official discs are involved and the
initial upgrade was done by other means outside of the License Agreements,
you are asking us to discuss a matter of illegal installation and use of a product.
There are no legal complete OS X system download upgrades online; only bits
that are update segments to a retail or as-shipped machine's original OS X install.
+{Or an installation where a previous owner had correct retail upgrade discs, &+
+chose to not include them with the re-sale of the computer it was installed in.}+
However, to answer the initial question. To get and use an externally enclosed
hard drive in suitable boot-capable housing, and get a free-running Clone
Utility (download online; often a donation-ware product, runs free) you can
make a bootable backup of everything in your computer to an external HDD.
This is the way to make a complete backup to restore all functions to the computer.
The Time Machine has some limits, in that it can restore only that which it saves.
It does not make a bootable clone of your entire computer system with apps and
your files, to an external drive device. A clone can. And some of the clone utility's
settings can also backup changes to an external drive's system; if that other drive
is attached to the computer correctly.
Carbon Copy Cloner, from Bombich Software; and also SuperDuper, another of
the most known software names you can download and use to clone boot-capable
system backups of your computer's hard disk drive contents, are often cited.
However you resolve the matter of the running OS X system in your computer,
derived from what appears to be questionable means, is part of the initial issue.
Since you do need to be able to fix an existing installation by unmounting the
computer's hard disk drive and run the computer from the other (install disc or
system clone) while it is Unmounted; and use the correct Disk Utility version to
help diagnose and perhaps be able to fix it. You can't use a Tiger version Disk
Utility to fix a Leopard installation, and so on.
So, the situation and replies as far as they can go (since the matter does
constitute an illegal system, if it was arrived at without correct discs) is a
limited one. And file sharing of copied Mac OS X (and other) software is
also considered illegal.
And, one way to get odd malware and unusual stuff, is to get an unauthorized
system upgrade from an illegal source online. You never know what's inside it.
The other reply was not a personal attack; the matter is of legal status and as
you have a product with a questionable system, the answer is to correct it.
And if you want to save everything in your computer, make a clone to a suitable
externally enclosed self-powered boot capable hard disk drive. With older PPC
Macs, that would best be to one with FireWire and the Oxford-type control chips.
However that works out...
Good luck & happy computing!

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
I have successfully installed all of my creative cloud apps with the exception being acrobat.
I cannot print from Indesign to PDF.
I have unistalled, reinstalled and still no Adobe Acrobat.
I now have to go back to Windows 8 and create the PDF's there.
Any one know how to get around this issue?
Thanks in advance
Kelvin

OSX has effectively killed the ability to print to pdf, (print to pdf eliminates most of the "Rich features" of current pdf).
Export from InDesign, always, excpet for the 1% of the time where you know why print to pdf would produce a better result.

Insalling ecc 6.0 on solaris 10 86*64 what is the time required

hi friends
we are trying to install the ecc 6.0 sr3 on solaris 64 bit with dell hardwareand ram 4gb . it is taking long time to insatall almost 30 hr completed not at installed.
what is the sapce required to install the ecc 6.0 sr3 on oracle how much we reqired on /oracle
and waht is the swap space we have to set
we are calling
advance tanks
regard
raja

I am really not sure whether the DELL hardware support this Solaris or not. Even there are lot of problem with windows2003 server on DELL the device drivers and other hardware related issues occur on these dell machine.
generally it doesn't 30 Hrs. Infact it didn't take that long time for me.
Regards,
Vamshi.

Is dns server required to install active directory

i have a confusion here.... i have to install active directory on win 2k or 2k3 server.... Can i install it with the help of WINS but not DNS .... is it possible to install AD with WINS installed/configured on server but at same time not any kind
of DNS (Third party Server/Service) is installed/configured there????..... thanx

AD rely on DNS name resolution. So DNS name resolution is a requirement for AD installation.
DNS requirements for installing Active Directory:
http://technet.microsoft.com/en-us/library/cc739159(WS.10).aspx
http://technet.microsoft.com/en-us/library/cc759550(WS.10).aspx
Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX http://blogs.sivarajan.com/ http://publications.sivarajan.com/ This posting is provided "AS IS" with no warranties, and confers no rights.

When I try to update Flash, Firefox tells me that the Flash plugin is required to install the Flash plugin.

When trying to update Flash, Firefox tells me that the Flash plugin is required to install the Flash plugin.
== This happened ==
Every time Firefox opened
== I believe it started a week ago

Try this direct link: [http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe]

Required software install to users

Im targeting a group of users for a "Required" software install. I am giving them a week to install from the App Store before making it mandatory. Where would I go to configure that this only be installed on the PC that they have
logged on the most and not a PC they happen to be on when it becomes mandatory?

Hi,
I concur with Gerry, you could import a file containing user device affinities to enable you to create many relationships at one time.
Note:Users and devices must have been discovered and exist as resources in the Configuration Manager database, otherwise this procedure will fail.
For more information, please review the link below:
How to Manually Configure User Device Affinity
http://blogs.msdn.com/b/scstr/archive/2012/05/31/how_2d00_to_2d00_manually_2d00_configure_2d00_user_2d00_device_2d00_affinity.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Requirement for installing Oracle EBS on virtual environment

Hi
I have a server with oracle Linux 5. We have the requirement to install oracle EBS 12.1.3 in a virtual environment.
for which I have downloaded the VM template files for x86-64 processor as matched to my server configuration.
So how should I go with visualization.I have checked a few things over the net which says about Oracle virtual box, oracle virtual Server, oracle virtual manager.
I am in confused state what to consider to do visualization.
first time I am handling this visualization in my career.
Thanks,
Charan
Edited by: charanjaitu on 24 Apr, 2013 3:10 PM

Hi;
Please review:
https://blogs.oracle.com/stevenChan/entry/oracle_vm_templates_available_for
Also see:
Demo Vision Installation of Oracle EBS R12.1.3
Regard
Helios

How many times can you install FCP?

Hello everyone, new to the forums here. I've searched throught he forums but couldnt find an answer to my question.
I'm in the middle of installing Final Cut Studio 2 (waiting to put in the next disc) when my buddy came over and mentioned that you could only install FCP one time and never install it again on any other computer. This worries me because in January I was going to get a new Mac Pro and un-install FC from my Macbook Pro so I could use it on the new computer. Is this possible? Or once I install this on my laptop is it permanent?
Thanks in advance for the help

Ok so you can install it on as many machines as you like but can only use (or have one activated through registering) one at a time. I know this is a touchy subject with piracy and all, but I thought it would just be rediculous if I installed this on my laptop, and 6 months down the line wanted to install it on another computer that I own.

How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first

Please help!!
How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first installation?

Thank you for your answers, it helps me a lot.
But sorry for my ignorance. I understand how you mean it, but I don't know how to do it. I'm scared to lose the settings/edits of the images.

To find the time required by the process chain to complete

Hi Experts,
I am calulating the average time required by the process chain to compete.
Is there any way to find the time required by the process chain to complete..
Thanks in advance.
Regards,
Ashwin

Hi,
There is a Tool provided by SAP to do the Process Chain Analysis.
It is basically a ABAP Program /SSA/BWT which provides the following BW Tools:
a)Process Chain Analysis : this tool is used to perform the Runtime analysis of the Process Chains. The analysis can be performed not only at Process Chain level but also at the Process Type level.
b)Detailed Request Analysis
c)Aggregate Toolset
d)Infoprovider BPPO Analysis
So you can go through the program and analyse the runtime of your Process Chains.
Regards,
Abhishek
Edited by: Abhishek Dutta on Aug 13, 2008 7:13 AM

How many times can I install Photoshop and Premiere Elements 13?

How many times can I install Photoshop and Premiere Elements 13?

mbuenger
Are you referring to how many times can I install, uninstall, reinstall Photoshop Elements 13 or Premiere Elements 13 on the same computer?
Or, how many of your computers can have a same purchased activated serial number at the same time for either of these products?
If the former, I know of no limit.
If the latter, the answer would be as John as mentioned.
ATR

How many times can i install LR5?

how many times can i install LR5? we have 4 laptops and 1 desktop in our home.

That's right. Nothing technical.
Just like the pre-activation days of the Adobe Creative Suite, it's an honour system to limit yourself to using the software on a maximum of two computers at any one time in order to comply with the EULA.

Is there a limit on how many times I can install my CS5?

I own CS5 and have it installed on 2 computers. I need to upgrade my computers and am wondering if I am going to have any trouble installing CS5 onto new machines. Is there a limit on how many times I can install the program? Do I have to verify ownership first or what?

I believe the limit on how any times an application can be installed has been removed, but, as it stands, there is no limit to the number of installations you can have... just the number of activated installations. For what it sounds like you are doing, there is should not be an issue of hitting a limit even if there is one.
If you are reinstalling on new machines then you probably want to deactivate the current installations before you attempt to activate on the new machines.

Is it possible to choose the serial port if only the run time engine is installed

I have an application, which communicates over the serial port. When I use the full version of Labview I can change the serial port without any problem from Com1 to Com2 (similar to the example “Hardeware input output -> serial -> Labview serial vi"). When I build an application and try to run this program on a computer where only the run time engine 6.1 is installed, it is not possible to choose the serial port. Since there is no “Measurement and Automation Explorer” available on the run time engine and no directory C:\VXIpnp is created, when the run time engine is installed, I do not see a way, how I can satisfy the computer with the information it needs for configuring
the different ports. Any suggestions?

Hi Daniel,
Before LV6.1 there was LV5.1 In LV5.1 the way to Spedify a resource was to use a string control with correct VIsa Resource Class identifier. For eg. "GPIB0::11" or "ASRL1::INSTR". With Introduction of VISA Resource Name Control and linking with MAX, These names are Available from Pull Down List and Can be Aliased, meaning ASRL1 which is Serial Port 1 can be called COM1 and so on. However the old method still works with all 6.1 Controls. Only thing is you have to make sure you Dont Conflict the Class Names ie Use "GPIB::.." instead of "ASRL..." when addressing Serial Port VI's.
To solve your Problem I would Build a Menu ring with COM1 to COM4 in the Pull Down List.
Next, If I use the Traditonal Serial Port VI wich accepts the Integer as Seria
l Port #. I just Wire the Menu Ring to this VI.(Remember COM1 is 0, COM2 is 1 for this VI)
If I use VISA Config Serial Post. I build an Array Constant with Corresponding VISA Class Names So in our case a String Array Constant of 4 elements "ASRL1::INST" to "ASRL4::INST". I Use Index Array Function With the Index Wired to my Menu Ring. The Array Input Terminal Wired to the Array Constant. The Output of this Array will be correct Visa Class Name Based on slection of my Menu Ring. I can Wire this as Input to my VISA Config Serial Port Vi.
I have attached a Small VI to Illustrate this.
Drawback: You must Predefine what Ports you will Want to Use. Basically you define all the cases.
I hope this Answers your Q!
Good Luck
Mache
Good Luck!
Mache
Attachments:
Serial_Port_Select.vi ‏36 KB

Time required to install GTS 7.2

Similar Messages

Maybe you are looking for