Time restricted rule not working.

BM 3.9 NW 6.5 SP7 iManager 2.6.
I have a time restricted rule on a couple of web sites so that they can only be accessed outside working hours but they dont appear to work properly. Sometimes the site will be blocked and other times it goes straight to it. Also if I get the access denied page 403 as soon as you hit the back button the site will load and ignore the rule ! Is this a bug or is my rule incorrect ?
Rule is set for allowable hours between 6pm to 7am with a lunch break between 12 and 2pm. It is alos set on a particular NDS container and I have specified the urls to be blocked. The allow box is ticked as I presumed that this meant it would only allow acces during the specified time. If I switch to deny it doesnt seem to make any difference. I know that if the page has been previously cached it will look for it there first so can I disable cache for this site ?
Ay help to any part of this problem is much appreciated.

I can't see the time being an issue as the page originates from the UK which is also where I am. It doesn't appear to work full stop. I added new rules for different web sites and none of them obey the time restrictions. I also tried deleting and recreating, using wildcards and substrings exclusions but nothing appears to make any difference. I have cleared the PC and BM cache as well. Now I cant seem to replicate the initial error when using the back button as the page is displayed anyway. Is there a definition for setting time rules as I cant seem to find much info on it. ie when setting the time restrictions you hughlight the bixes to allow access at those times. Then do you allow access or deny access on the rule ? What do you specify as the url you want to restrict. I itried Source, destination, url just about all options so what are the rule components needed to make it complete. If it helps I want to block Sky Sports | Home during working hours 6am to 12pm and 2pm to 6pm.
Thanks,
Jeff

Similar Messages

I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

Infopath form load rule not working in browser forms but works on Client

Hi
I am working on an Infopath form and there are rules on form load. The form load checks for a value in a list, if the username() matches the one in the list, then the form would change its view.
It works when I open it on client, but on the browser it fails.
Have anyone encountered such an issue.

Check below:
http://stackoverflow.com/questions/16222681/infopath-rule-is-not-running-when-checking-sharepoint-list-field-value
Ensure that "Include data for the active form only" was checked (I had to separate this field into another data connection because that box could not be checked for another field I was using), and
Ensure that in the rule I was selecting from the "dataFields" folder under the data connection instead of "queryFields"
http://sharepoint.stackexchange.com/questions/28554/infopath-form-load-rules-not-working
if I edit the Infopath form on Infopath 2007, it seems that the rules for the load form will be visible if created.
This look like a bug. Here are the steps below that will lead you to the bug:
Step 1: Open the infopath form in Infopath 2010 and create 6 rules for Form Load and Save it as a file.
Step 2: Open that infopath form that you created in Step 1 in InfoPath 2010 and go to the
Form Load section. You will only see the first 5 rules. The 6th rules that you created for Step 1 will just "vanish". Now, close that infopath form.
Step 3: Open that infopath form that you created in step 1 in InfoPath 2007 and select Tools > Form Option. In the
Open and Save category, click the Rules button and add a new rule in it and save it.
Step 4: Open that infopath form that you modify as describe in Step 3 in InfoPath 2010. That 6th rule will be visible.
Therefore, there might be a bug in InfoPath 2010 that restrict Rules to a max of 5 in Form Load and thus if anyone open that form in SharePoint, only the first 5 rules will be executed.
If this helped you resolve your issue, please mark it Answered

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

I got an error message: 'iTunes has stopped working. A problem caused the program to stop working correctly. The solution asked me to load latest version which I did many times and still not working... HELP!

[Window Title]
Microsoft Windows
[Main Instruction]
iTunes has stopped working
[Content]
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Close program]
This is what I got... sorry, not very tech savvy to copy the error message onto here...
Have tried uninstalled and re-installed iTune, updated the new version of 10.6... many times over still not working!!!
I share the frustrations of many here. HELP!!!!!

Hi there Nok Saensanoh,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W.

My time machine is not working and the disk utilities cant repair it and is asking me to format the drive again. How can I backup the files before formatting the drive so that I don't lose my files?

Hi
My time machine hard drive has stopped working after the latest update and the Disk Utilities says,:
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
How can I back up my files before reformatting when I can't even open the drive's folder?
Thanks for the help.

I think my time machine is not working correctly and I dont know how to get it back... I really need to get back my photos!!!!!
Exactly this was the way I USED to make restores of files and photos..
but know I CANT!!!!
When I am inside iPhoto y click on the Time Machine icon at the Dock and it goes to this...
at my right side there are the backups but when i click them nothing happens they are like NOT CLICKABLE...
PLEASEE!!! Help me!!

I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

Instead of getting annoyed, read the User's Guide and try basic troubleshooting.

Time machine is not working. I get a message: You can't open the application "Time Machine" because it may be damaged or incomplete.

Time machine is not working under "Applications". I get this message: You can’t open the application “Time Machine” because it may be damaged or incomplete. What do I do?
Time machine under system preferences lets me setup time capsule. But backup fails because "Volume is in use" Help please!

It does sound like you have a corrupted install.
The volume in use error is something we see all the time.
Look at C12 here. http://pondini.org/TM/Troubleshooting.html
But I suspect you have more serious issue.
I would run a disk verify on your local OS disk. A5 in the above reference has some info.

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

HT4236 I've been using the iCloud Photo Stream with my PC for few months already. It work fine every time, but suddenly not work for today

I've been using the iCloud Photo Stream with my PC for few months already. It work fine every time, but suddenly not work for today

Hey lalitgupta,
Thanks for the question. The following article provides troubleshooting steps for Photo Stream:
iCloud: Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Thanks,
Matt M.

"access restrictions" did not work sometimes when using 3-tier DeskI.

My customer found that "access restrictions" did not work sometimes when using 3-tier DeskI.
But this issue can be solved by logging on from another machine, or restarting the DeskI.
For I can reproduce this issue, so I just want to know that:
1.What is it probably related to?
2.If this issue happens again, what can I suggest my customer for tracking it?
For example, get some log files from servers etc.
Thanks!

Hi Sarah,
Also you can try the following solution.
1. Import the universe.
2. Go to manage access restrictions
3. Remove the restriction .
4. Again create the rescrition and unchecked the " limit size of result set to"
5. Now assign it to the unlimited results group ( this is the name of
the group we have given to those users who should be able to retrieve
more than X rows)
6. Now we save the universe. (Dont export the universe).
I hope this will help you.
Regards,
Sarbhjeet Kaur

Time machine was not working. I bought a new time machine and migrated time machine files to new time capsule; not recognized by yosemite

Time machine was not working after yosemite upgrade on new and old MacBooks in my house. I bought a new time machine and migrated time machine files to new time capsule. I changed the names of the older sparse bundles to the default values. Yosemite still does not recognize them.

I presume the bought a time machine means a time capsule.
How did you migrate the Time Machine files?
From where? A Time Capsule or external drive?
It is difficult to get TM working with Yosemite.. since it doesn't work after the upgrade on the old TM backup.. it will not work on the migrated files either.
You simply start a new backup and store the old backups for a few months until you are ready to dump them.
The instructions for inheriting old backups is B5 and B6 here.
http://pondini.org/TM/Troubleshooting.html
However it is just unlikely to work.. TM in Yosemite is very different. Broken even.
I also strongly recommend people to use Carbon Copy Cloner or some other 3rd party backup until Apple get the bugs fixed. And after several months.. they are still rampant.

MAC adress restriction is not working

Hi All
I have 1 AirPort Extreme (4th generation) who is a DHCP server in my local LAN 172.16.1.xxx
Connected to this Extreme, one Airport Epresse (1th) generation
By default, all connection is filtering by MAC Adress.and for my kids, I stop the network during the night.
All work's fine in WiFi.
But if one PC is connected to the AirPort Express by LAN (Ethernet), the restriction is not working.
I try to add restriction for the AirPort Extrem - by MAC Adresse of course - same issue.
could you help me to fix this error or is it a BUG in the airport.
Thanks in advance for your feedback
Cheers

But if one PC is connected to the AirPort Express by LAN (Ethernet), the restriction is not working.
Since 2007, Apple's Timed Access feature does what it says that it will do. It only works for wireless clients......not Ethernet connected clients.
You may have missed this notation in the setup screen in Timed Access. See the highlighted box:
If you want to see a feature to include Ethernet clients in Timed Access, I suggest that you contact Apple to let them know.
Apple - AirPort Extreme - Feedback

Quick Time player is not working and I can't see apple videos. What can I do?

Quick Time player is not working and I can't see apple videos. What can I do?

Backup files off the comptuer, disconnect
run through 1-16 here anyway
Step by Step to fix your Mac
Reinstall Just OS X
How to reinstall just OS X or erase/install OS X

Defaulting Rules Not Working for Repair Orders in OM?

Hi,
Defaulting Rules have been setup for return line & standard line based on few conditions and it is working fine if we create a sales order directly from OM (Manual SO)?
But in our project we are using Depot Repair(Repair Orders), we tried to create a service request and then converted to a sales order here defaulting rules not working for repair orders?
Please help me to solve this issue ASAP.
Thanks,
Kishor

Hi,
You have like this:
1. Price list
2.OE_DEFAULT_PVT.Get_SOB_Currency_Code
You have to make
1. XXOE_DEFAULT_PVT.custom_code
2. Price list
3.OE_DEFAULT_PVT.Get_SOB_Currency_Code
Did you made own custom code to pick currency?
Regards,
Luko

Time restricted rule not working.

Similar Messages

Maybe you are looking for