Time reversal using BAPI_CATIMESHEETMGR_CHANGE

Hi,
I am using BAPI_CATIMESHEETMGR_CHANGE to update time entries in CATSDB table. However I am not getting how to use this BAPI to do time reversal. Can anyone please guide me?
Thanks & Regards,
Swati

hi swati,
please refer to the below link:
http://abap.wikiprog.com/wiki/BAPI_CATIMESHEETMGR_CHANGE
http://feeds.feedburner.com/r/SapAbapTipsTricksHintsExamples/3/2662..
regards,
Alpa.

Similar Messages

After Effects jumps some frames when i use "time reversal layer"

hi!
i'm editing a stop-motion video. i have a big problem that with AEcs5 i never had.
when i use "time reversal layer" with some image sequence layer (but also with a .mov with alpha) AE become crazy:
sometimes he erase (or jump) some frames, sometimes he put frames from other image sequence that i didn' put in the timeline!!
if u see the image there is nothing here, and appears an image that i didn't put there!!
can you help me please?
thanks!

Hi Rick, super thanks,
but i checked and all my comp are 24fps.
for your suggestion of use the time remap to invert one sequence, many thanks, i'll try!
i use the time reverse, because is good with stop motion when i whant to play with go>back>go>back
i show u the problem:
the column have to go up and down:
but when i render the video there are some frames that jump:

Time Reversed Layers Have Blank Frames in CC

Hey guys. So in my project file I have a lot of looping footage, which I achieved by using time reversed layers. I started the project file in a trial version of CS5.5 last week, but upgraded to Creative Cloud yesterday. Since moving to CC I noticed that all my time reversed layers have missing frames at the beginning of the layer, causing a blinking effect on my footage. In the final comps those layers will flicker out, showing the images and backgrounds beneath them both within AE and in the final comps when I render them to an .mov. I'm wondering if anyone else has run into this bug and knows of a way to fix it. I've nudged my layers around a bit, but regardless of when the layer starts or from which point it begins sampling my footage, the first frame of the time reversed layers are blank.
Here's some information that might be helpful:
The compositions are 1280x720, square pixel aspect ratio. Starting timecode of 0:00:00:00 on all comps. The footage type is h.264 with a framerate of 23.976, the same framerate as the comps. My footage interpretation is premultiplied for Alpha, set to use the framerate from file, starting timecode of 0:00:00:00, and with seperate fields off and remove pulldown off.
The specific version of After Effects CC is 12.0.0.404. My computer information is Mac OSX version 10.8.3. 3.,4 GHz Intel Core i7. 16 GB RAM, 1600 MHz DDR3.
Thanks in adcvance guys. I could really use some insight in answering my question.

Yeah. We're hoping to move everything to a better video format once we get a better network that can handle that quickly, so for now we're using h.264. In case you're wondering, the same problem happens with other video formats too. Creating a new composition and time reversing it gives me the same problem. Here's a screenshot like you asked for:
My timeline's zoomed in as far as it goes. Even though my cursor's at the intersection of the two layers, the time reversed layer, which is a pair of eyes above the mouth, shows up blank and there's no eyes. Any thoughts?

Time-reversing any layer causes After Effects CC to crash

Whenever I time-reverse a layer - the program window simply fades into white and stops responding. Then, whatever I click - it crashes immediately. The error code is simple AppCrash.
I run a PC with Windows 7 Ultimate x64, 1GB Nvidia Graphics card, 2.16 GHz dual-core Intel processor and a bit less than 4 GB RAM.
Please suggest a fix for this ASAP.
Using CC 12.1.

Please suggest a fix for this ASAP.
Unlikely. You have not told us anything about your comp settings, footage used, Fast Preview setting etc..
Mylenium

Time-reverse layer causes A.E to crash.

So I started the trial.
Relativly new to After Effects and so I
started doing a tutorial involving Trapcode Particular 2.2 trial
on my A.E cc 2014 trial.
Up til the final time-reverse layer instruction
Everything gone fine.
But crashes everytime when applying the time-reverse.
I´ve tried pre-composing the layer and used the effect on that composition.
Rendered all of the animation and it flows fine. Just not with "the effect".
I have a win 7,1 64-bit system Geforce GT 630.
16gb ram.
/E

Are you pre-composing before you time reverse? Have you tried Time Remapping and just selecting the keyframes and using the Keyframe Assistant to time reverse the keyframes? If you are still getting a crash then pre-render your comp before using Time Reverse or Time Remapping. FYI, Time Remapping renders a lot faster than Time Reverse.

Why is there a problem with Itunes freezing up at least 1-2 times when using it?

It is kind of getting old but my Itunes player (does not matter which one as I update to the latest version) has this nasty habit of freezing whether I am trying to listen to the radio or my own library.
It is now happening almost every time I use Itunes and when it freezes the only fix is to do the old Control-Alt-Delete.
I am running a 64 bit Window's 7 home premium and prefer using Itunes but you know if you does not work get something else
I have 4 GBs Ram with a 2.6 Dual Core Pentium
More frustrating is the lack of support from Apple. Oh wait Itunes is for free so you do not get help.
Even better is a troubleshooting aid that when you click NO it did not help then the window itself just disappears
Yes I checked and it is a system problem but it is a problem that has existed since Itunes put out their 10 series.
Given the number of times this question is being asked by others then is it too much to think that Apple realizes that they have a problem application and it is not the fault of the user or Microsoft OS.
No offense Apple but I know if 10% have a problem that it does not matter to you but why should I spend money on any of your products if you can not come out with a fix for your own medial player?

Do not use Clear Recent History to clear the "Site Preferences"
* https://support.mozilla.com/kb/Clear+Recent+History
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

Before every time I use to open a new tab it comes as top site. Now not anymore and instead is an automatically website calle Only Search. I went to Safari preference I change everything and when I quit Safari all the changes are gone.

Every time I used to open a new tab it comes as top site. Now not anymore , instead it open in a website called Only Search, I went to safari preferences and made all changes but after I quit Safari and open again all changes are gone. I can not change anything and new tab comes by it self with other website.

There is no need to download anything to solve this problem.
You may have installed the "Downlite" or "VSearch" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the support article, you may also need to remove this item in the same way:
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This malware is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked.

I recently bought two iMac quad core i5 processor speed 2.5 Ghz. Every time I use Air Drop and I send a file from one iMac to the other, a black curtain drops and I am asked to restart the computer!!! What can I do?

I recently bought two iMac quad core i5 processor speed 2.5 Ghz. Every time I use Air Drop and I send a file from one iMac to the other, a black curtain drops and I am asked to restart the computer!!! What can I do?

That's a kernel panic and indicates some sort of problem either with the computer's hardware or software. Visit The XLab FAQs and read the FAQ on diagnosing kernel panics. It would help to post the panic log: Mac OS X- How to log a kernel panic.
Meanwhile, try booting the computers into Safe Mode then restarting normally. If this is simply a disk repair or cache file problem then this may fix it.
You can also try creating a new admin account on each computer then booting into the new account. This would help determine if the problem is related to a bad file in the user accounts.

I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

I am unable to create a new folder on either of my auxillary disk drives. I can access the files and folders that were there when I transferred one of the drives from a PC. Time machine uses one for backup and I want to use the other to store photos which are large files. An help would be appreciated.

Thanks for the reply. If I reformat the drive will I be able to access the files on it from the MAC. I do not share the drive with a PC. The files were originally created on a PC which I no longer use. I do want to continue to access the files put there by the PC. I would like to not have to copy them over to the MAC hard drive just to use them. The second aux drive is new and works fine because it was formatted by the MAC. I can drag and drop files there and work with just as if they were on the internal drive.

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

Download the supplemental fix to 10.7.5
http://support.apple.com/kb/DL1599

I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files?

I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files? Does using time machine mean that that partition is no longer able to be used as it used to be?
HDD is a Toshiba 1TB, partitioned into two 500GB partitions.
OS X version 10.9.2

Yes, sharing a TM disk is a bad idea, and disks are cheap enough so that you don't need to.
Now
Have you tried to repair the disk yet

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

How to get the most current file based on date and time stamp using SSIS?

Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vv

hi simon
i excuted this script it is giving error..
   Microsoft SQL Server Integration Services Script Task
   Write scripts using Microsoft Visual C# 2008.
   The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
    [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
    public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
        #region VSTA generated code
        enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
            Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
        #endregion
       The execution engine calls this method when the task executes.
       To access the object model, use the Dts property. Connections, variables, events,
       and logging features are available as members of the Dts property as shown in the following examples.
       To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
       To post a log entry, call Dts.Log("This is my log text", 999, null);
       To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
       To use the connections collection use something like the following:
       ConnectionManager cm = Dts.Connections.Add("OLEDB");
       cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
       Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
       To open Help, press F1.
        public void Main()
            string file = Dts.Variables["User::FolderName"].Value.ToString();
            string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
            System.IO.FileInfo finf;
            DateTime currentDate = new DateTime();
            string lastFile = string.Empty;
            foreach (string f in files)
                finf = new System.IO.FileInfo(f);
                if (finf.CreationTime >= currentDate)
                    currentDate = finf.CreationTime;
                    lastFile = f;
            Dts.Variables["User::LastFile"].Value = lastFile;
            Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv

How do I retrieve data from a 500 GB Time Machine used as external hard drive?

I have a very particular situation. For several years I used a 500GB Time Machine as a wi-fi broadcaster, a back up, and also as external storage for iTunes - I 'partitioned' it to allow for it's use as an external drive.
Fast forward, and I've replaced the Time Machine with a new 3 TB Time Machine, as well as purchased a separate external drive (3 TB Western Digital) to store my iTunes files (so I no longer need to partition). The new Time Machine is my wi-fu hub.
The problem: I need to retrieve the 300 gb of audio files that are on my old partitioned Time Machine, and move them to my new WD external drive. I've already set up the new Time Machine as my wi-fi broadcaster, and de-activated the old Time Machine.
(I had tried to move the files previous to setting up the new Time Machine, but I realized after de-activating it that I wasn't as thorough as I thought, so I need to go back and move them again.)
I've tried to re-connect to the old Time Machine using an ethernet cable, but when I do, it recognizes it as my wi-fi hub, and it screws up my network - it suddenly allows me access to the old Time Machine, but blocks access to the new WD external drive.
So in a nutshell - I need to be able to connect the old Time Machine to my laptop (a Macbook running OS X 10.7.5) and have my new network see it as just an external drive - so I can then move the 300 GB of audio files directly on to my new WD external drive.
Any thoughts on how I can do this?

Why not connect both drives to the computer, turn off the wi-fi, and then copy the files over. Or you can use Disk Utility/Restore to move the files. See the note - it will erase the WD drive.
You can then set things back to the way you want them. You should have more than one back up as hard drives do fail. In this case, you could use a clone and keep it on the WD drive.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Commonly Used Backup Methods

HT5622 Can Face Time be used to connect with more than one person at a time?

Can I connect with more than one person at a time when using Face Time?

You mean like a conference call? No, unfortunately.

Time reversal using BAPI_CATIMESHEETMGR_CHANGE

Similar Messages

Maybe you are looking for