Time-Scale option and bookmark setting possible on Creative ZEN Vision

Does the ZEN Vision: M 60GB has a time scale option and is it possible to set bookmarks?on songs in this player like in the old CREATIVE Nomad Jukebox 3. As a musician I like this options for exercising and rehearsals.

Theres a bookmark feature, but it needs improvment. Theres is no Time-Scaling, a feature I miss from the Zen Xtra.

Similar Messages

HT201250 I backed up my iMac with a "WD My Passport" using the Time Machine option and tried to restore my iMac but it only saved my applications none of my documents, photos nothing else! What happened?

I backed up my iMac with a "WD My Passport" using the Time Machine option and tried to restore my iMac but it only saved my applications none of my documents, photos nothing else! What happened?

There should be two sparse bundles on the TC, one for each Mac. If you click the TC in a Finder sidebar, you should see something like this (in Column View):
If you see the sparse bundle for the iMac there, but not on the window where you do a full system restore (after starting from your Recovery HD or OSX Install disc), they may be corrupted (especially if your iMac was failing at the time of the last backup).
Try repairing those backups, per #A5 in Time Machine - Troubleshooting.
Then try the full restore again, per Time Machine - Frequently Asked Question #14. Note that if you suspect problems on the most recent backup, you might want to select an earlier one.

Creative Zen Vision 30GB - How to set IR Remote ON with Navigation keys not working in the play

I have Creative Zen Vision 30GB player. Within a month of buying, its navigation keys stopped working. I took it to the customer service of store where I bought it and they fixed it (their solution was to make firmware update, even though I do not understand how come that can fix this issue). Anyways after another 5 months of not so often use, the same problem returned (key pad stopped working and without it this player is useless). I sent it to Creative and they returned it saying that as it has few scratches on the edges, they believe it has been hit. I never dropped the player and these are normal scratches at the end if you do not use any skin (which I could never find for this player). Btw from my other friend's experiences, Creative always does like this, never considered warranty (so beware!). Anyways now the problem is that I have IR remote for Zen vision but it can not work till IR Remote setting in System->Player Settings is switched ON. And this can not be done as the navigation keys are not working. So please please suggest me some other way if anybody of you know to enable this setting through software. Otherwise this costly player is just a 30GB harddisk for me

Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

Creative Zen Vision M 30gb and Vista.

Is there a way to get a Creative Zen Vision M 30gb to work on a Vista computer? It will save me buying my son a new MP3 player. Thanks.

I've been in touch with Creative support for over a week now but so far without success. Every time I download links they suggest I still can't access Creative Media Explorer, I just keep getting this error message:-
"The Creative Media Explorer that is compatible with this device is not installed. Please reinstall the application and try again"
This has included deleting all previously installed Crteati've files as well as downloading in a 'Clean Boot'. I've also rebooted my Zen Vision M.
At this rate I'll have to bin the Zen and look at an ipod:manmad:

Creative Zen Vision: M, Firmware 1.40.02 and screen backlight not blank

Is there a bug in the .40.02 firmware?
I just bought a Creative Zen Vision: M yesterday.
I noticed that with the out of the box firmware (.30.02), the LCD screen backlight would turn off to conserve battery power.
Later in the day, I upgraded to the .40.02 firmware posted May 24, 2006. Now my LCD screen backlight stays lit all the time.
Since the player is so new, I wonder if I'm imagining things.
Can someone with .30.02 or earlier firmware confirm that their screen backlight turns off after some period of time turning the screen dark?
Can someone reproduce the problem with the .40.02 firmware that the screen backlight stays lit, no matter how long since the last button press?
If I'm not imagining things, this would seem to dramatically affect the playtime on a full charge.
Thanks.

This is INDEED a problem.
The screen is? SUPPOSED to blank all by itself , NOT only with the lock button engaged. I have this exact problem and returned one player only to see the same thing with the next. I also have the .40.02 firmware !!! Creative support said to upgrade my firmware to .6.xx? and see what happens. If the screen doesn't blank by itself without the lock button,? they are sending me another player !

Tiger and creative zen vision

hi. i live in the us but i am currently visiting in paris, france. i brought my g3 ibook (new to me) and my creative zen vision with me but no software to transfer music from the zen to the mac. that is what i need to do now to continue with some video projects i'm working on. i've tried to use itunes, real player, and nowhere in the software do i get any indication that my zen is plugged in. i've gone into itunes and authorized this computer... that's the most "advanced" thing i've gone. when i plug the zen into the mac, the zen does turn on but there is no icon. i've searched all over the forums for hours now and can't figure out what to do next. thanks for any help. ~laura

Hello laura
Creative don't supply drivers for Macs, only windows, but there is third party driver support for Macs from XNJB
http://www.wentnet.com/projects/xnjb/
Check the device list to see if yours is listed.
regards roam

How do I import music and picture files from my Creative Zen?

I have a Creative Zen media player, which uses Windows Media Player to operate. I have downloaded media player for Mac OS X, but cannot figure out how to import my music. On my old PC, when I plugged in my mp3 player, it automatically was recognized. Nothing happens when I plug it in to my iMac. What do I need to do?

I have bought a couple of Creative MuVo's for loved ones, and they, as removable USB thumb drives, work well with any OS. The Zen, on the other hand, doesn't have the design simplicity of the MuVo, which is why I didn't buy one. I think that they will pretty much only work with Windows.
One thing is for sure: If you plug in the Zen and it doesn't mount on the Desktop or in a Finder window, it isn't going to work with OS X--yet, at the same time, might possibly get corrupted or damaged when it fails to mount correctly and then you unplug it
P.S. Windows Media Player 7.1 for Mac does not have any support for portable players, and given the availability of Microsoft's free Flip4Mac plugin, is truly a worthless download. If this program has been installed, it would probably be best to delete it (and its preference files for that matter) to avoid potential conflicts with the up-to-date Flip4Mac plugin, which I assume you're going to install. Keep in mind that this plugin has nothing to do with adding support for portable players, but since we're on the subject of Windows Media Player, I thought it in good judgment to mention this.

Possible new Creative Zen 40GB MP3 play

Hi there, does anybody know if there would be a new Creative Zen 40GB MP3 player due out soon? Here in Malaysia, the new Creative Zen 20GB MP3 player has replaced the Zen Touch 20GB player, and only the Zen Touch 40GB player is still available. Been wondering if I should wait for a new Creative Zen 40GB player instead of getting the Zen Touch 40GB player now. The Creative Zen has better specs then the Zen Touch except for the battery life which is only rated for hours. A big let down from the previous 24 hours battery life of the Zen Touch. Now, it would be just perfect if the new possible Zen 40GB player had the improved specs together with the 24 hours battery.

Most probably, you know how Creative is making a Zen Photo or something, does that reminds you of the iPod Photo You'll just have to wait though, currently I'm just happy with my 5 Gig, it has more than enough space

HELP W/ CREATIVE ZEN VISION: M STUFF AND CHARGING PLZ SO M

??Hi, I just bought a zv m and dynex uni'versal mp3 accessory kit (I was going to buy the creative stuffs like power?adapter and a/v cable but he said this worked too and it was?more in count ... i checked on the back of it's product and there was compabilitys with some zens and this one:zvm30engbk wich he said was zen vision m 30g black) all right .. so i bought it ( at usa ) and gone home ( at brazil ) ... yeterday at first time?i tried to charge and it didn't work ... the sign of recharging appears and evberything but it just dont charges ( like i can stay all the time using the mp3 with it's plugged but if i unplug it just turn off automatically?) .. .then i got the think that .. maybe is the voltage .. .here in brazil is 0 volts while there in usa is?220?right ? but after charging it on my computer with?creatives cables and etc i gone test the a/v cable and it didnt work well. .the sound was perfect but the image wasn't showing up ... my dad said it was something about pal video config and not ntsc or whatever?.... but anyways i tried alll the ways and?still?got?no image?=/ ... anyone got some idea of whats going on plz? thanks so very much for your attencion and help.

hi i need your help . i own a vision m and i cant seem to find how to record my fm radio directly into my vision m . i had the 5g and 8 g and they record ok but i just cant find from where i have to go in to find the record button wen listening to radio

Creative zen vision price, 30gb, and 6

hi all, i was just wondering how much does the zen vision: m costs ?
i am sure that the 30gb model costs like 300 $ or so !
but how much does the 60gb model costs ?
anyone knows ?
please tell !

I've been in touch with Creative support for over a week now but so far without success. Every time I download links they suggest I still can't access Creative Media Explorer, I just keep getting this error message:-
"The Creative Media Explorer that is compatible with this device is not installed. Please reinstall the application and try again"
This has included deleting all previously installed Crteati've files as well as downloading in a 'Clean Boot'. I've also rebooted my Zen Vision M.
At this rate I'll have to bin the Zen and look at an ipod:manmad:

Is it possible to charge Zen Vision:M without drivers install

Ok, here's the deal.. I bought my Vision:M, installed the software on my home computer, charged the player up, put my songs on.. Everything went fine. I had to go out of town, so I brought my laptop, thinking I'd use it to recharge my player. However, when I tried to install the software, I found out that it's not compatible with anything other than Windows XP (I have windows 2000 professional on my laptop) So, I tried just plugging my player into the USB port on the laptop anyway. The player turned on, and the lightning bolt came on over the battery. Hooray! But, it never did actually charge. Left it plugged in overnight (about 6 hours) and in the morning it had the same amount of charge as when I had first plugged it in. So, today I visited a couple electronics stores to try to find a car charger.. no luck. Nobody had a charger made by creative labs, and the "uni'versals" I tried didn't work.
I bought and tried two. Both caused the player to turn on when plugged in, but neither actually charged it (the lightning bolt never even came on over the batttery pic) I can't seem to find drivers anywhere for this that will work with Windows 2000. Found a 39 meg file on this site here (the player organizer, I think) but even that wouldn't install, because it said it failed to detect a supported product (my zen was plugged in, but now has no battery at all left) So, sorry to ramble so much... Can anyone help Is there any way for me to charge this thing I'm gonna have a LONG dri've home (400 miles) and don't want to do that without my tunes. Thanks in advance!

I use this one: Griffin Technology iTrip Auto Uni'versal Plus (7259TRIPUNP)http://www.circuitcity.com/ssm/Griffin-Technology-iTrip-Auto-Uni'versal-Plus-7259TRIPUNP/sem/rpsm/oid/68474/catOid/-2927/rpem/ccd/productDetail.do?Its an FM transmiitter and if you take along the sync adapter and your USB cable you can plug it in to the Itrip and the Zen Vision M will charge as your are listening to it.

Angry and Frustrated, can anyone help? (Zen Vision

Hi. I am really upset right now, so please bear with me if I don't sound calm, cool, and collected during this post. I was getting tired of the slowing response time with my player. I came online this morning, and found the documentation for my player (30GB version.)?According to that documentation, it was relati'vely safe to use the "Clean up your player's firmware" option. Supposedly that should just fix broken links to music and such. I figured it would be no big deal, especially since in that same documentation, there is a huge warning written about formatting the player and losing everything if you choose "Format All."?After running the cleanup, I used the Reboot option. When the player restarted, it gave me a message that it was rebuilding, and finally, the player came back up again. Guess what? Everything is GONE! All of my music, all of my videos, everything!?Needless to say, I am quite a bit upset right now. Is there any way for me to recover my stuff? I mean rather than get back to the computer where my stuff is, and reinstall it's (I am quite far from that computer, and I really want my music back.)?I have submitted a Customer Service request, but the last time I did that, it took almost a week for them to get back to me. I'm really?hoping someone here can help me out. I love my player, I never even considered an iPod when I was looking for a player, but if this can't be fixed, I may have to reconsider my loyalty to this product. I really appreciate any help anyone can provide. Happy Hollidays to all!?EDIT: My firmware version is .50.02.Message Edited by SentinelLou on 2-22-20060:48 AM
EDIT2: No one has ever run into this before? Is it just me? I really hope someone can help me out.
Message Edited by SentinelLou on 2-22-2006:33 AM

A clean up shouldn't have done what you say it did, although I guess anything is possible.
I don't have a Vision:M, but there should be an Information option, then system info screen where it will give you a break down of what is on the player.
If no one here has a solution, (and I have a Sleek Photo not a Vision:M). try epizenter,net which is basically a large Vision:M help/fan site, it is a pretty good site for the Vision:M. (I hope the mods. don't mind this).
Edited to add:Well, if you videos are there, your music is probably there also. Try looking in the main menu and choose music library-all music, and see if you see the music you loaded on the Vision:M.Message Edited by Tony3 on 2-22-200609:39 AM

Help with formats and loading videos on to the Zen Vision M 30

Recently I purchased a my Vision M. I've not had much trouble installing videos or music. Then the other day, I began to have problems. Can anyone tell me exaclty which formats are supported and why the ones that show as supported will not transfer? aiv won't transfer, wmv, mpeg wo't either.All the videos I've transfered are now in wmv format. Lately all the videos I try to transfer will not transfer. I get the message that the conversion was unseccessful but I have no idea why or how to fix it. I've downloaded the newest firmware.

Thread closed. DVD ripping is illegal in some countries and a grey area in others. We cannot allow discussion on this topic.
Daniel

Show Time Scale

Hi,
Just evaluating CR 2008 having used CR 2008 Basic through Visual Studio 2008. The reason for considering the upgrade is to benefit from the enhanced formatting abilities in the full version.
My problem is that I am trying to configure a stacked area chart to show various related financial figures over the period of a year or more. My problem with a regular stacked area chart is that because of the large number of data points (daily) the X axis becomes far too chaotic with the large number of labels. The obvious option seems to be to use the "Show time scale" option in axis settings, however when you chose this option the "Date axis area" chart type is automatically chosen and this chart type doesn't seem to allow stacking. Can anybody help?
Secondly, is there any way to change the scaling and date format of the X axis when scaling by time e.g. is there anyway of changing the scale to monthly and showing the date format as mm/yy. Also if I wanted to view the chart using a yearly scale is there any way of doing this and setting the date format to yyyy.
Kind Regards,
Mark

>
Raghavendra Gadhamsetty wrote:
> Did you try adding the formula year(datefield) in X axis by removing the existing datefield?
>
> Regards,
> Raghavendra
Thanks for the answer regarding dates. I'm still awaiting an answer on the following part of my question:
"My problem is that I am trying to configure a stacked area chart to show various related financial figures over the period of a year or more. My problem with a regular stacked area chart is that because of the large number of data points (daily) the X axis becomes far too chaotic with the large number of labels. The obvious option seems to be to use the "Show time scale" option in axis settings, however when you chose this option the "Date axis area" chart type is automatically chosen and this chart type doesn't seem to allow stacking. Can anybody help?"
Thanks in advance for your help.
Kind Regards,
Mark

Creating chart with "Time Scale" on group axis

Hello,
I am using Visual Studio 2005 with Crystal Reports (ver 10.2) and I would like to create a report with a "Date axis line chart". The group axis of the chart should act as a timeline, so I selected "Show Time Scale" in the general options of the group axis. I'll give you a short example of the input data:
It is just a simple table with 2 columns. In the first column there is a timestamp (X/group axis), in the second column an integer value (Y/data axis) that represents a status of something:
col1. . . . . . . . . . . . . . . . col2
2012-01-01 00:00:00 . . . . 2
2012-01-01 01:00:00 . . . . 1
2012-01-01 09:00:00 . . . . 3
2012-01-02 12:00:00 . . . . 1
.... and so on.
As you can see, the differences between the timestamps are not equal. Therefore I have selected the "Time Scale" option to get the values placed correctly on the timeline. When I execute it, the line is shown correctly, but the group axis has just one label per day. I would like to have one per hour, but I did not find any way to realize it. Is it possible to change the division of the group axis? In the tab "scales" of the options dialog you can only select "Day", "Month" and "Year" for the base unit. Is there any way to change the base unit from day to hour?
Thanks,
Jan

This being more of a design question I asked the CR design guys for some guidance / comment. (BTW., you posted to the correct / prefered forum here as you're using the bundled CR). Anyhow, the answer I got is not particularly encouraging.
We looked at the stand-alone / full version of CR but only confirmed that there is no other options than Day, Month or Year for this type of chart - even in the full CR designer.
Suggestions that did come up:
- Create a SQL Query that generates the missing data. Unfortunately, it would be up to you to figure this out...
- Use the subreport technique to fill the missing time. ( I have attached a sample report with some explanations )
If you have more questions, I'd recommend creating a thread in the [SAP Crystal Reports Design|SAP Crystal Reports, version for Visual Studio; forum. Quote this thread and see if they can provide further assistance.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Time-Scale option and bookmark setting possible on Creative ZEN Vision

Similar Messages

Maybe you are looking for