Time Scatter Chart

Hi Everyone,
is it possible to use in the time scatter chart time stamp?
I have already used date and time but now I need both together.
Thanks and Regards
Erwin

Neeraja,
In the BusinessGraphic UI Element, right click and Select Insert Cateogy, In the Description, bind your context or enter text. Also check what kind of graph you are inserting in the BusinessGraphicUI element properties of chart type.
/Raj Peddisetty.

Similar Messages

  • Legend displacement/mix-up in Time Scatter Chart

    Hello, we have applied Java patch 11 on BW 7.0, but we have a major problem with a Time Scatter chart we are unable to solve.
    Data are displayed correctly on the chart itself, but the legend (names are taken from the query visualized by the chart) is misplaced.
    If executed as stand-alone, the query gives correct results (the chart itself visualizes them correctly). We looked for a solution between the SAP official notes related to our patch level, but we didn't find anything that could be useful to us to solve our problem.

    Hi,
    solve it by installing the latest IGS patchlevel, see note 1167019!
    Regards, Kai

  • Time-series Chart

    Warning, CR Newbie here so this may be a stupid question. I am evaluating the trial version of CR to see if it will be a good fit for an upcoming project. I've seen some related posts in the SCN, but no answers that quite fit.
    I'm looking to create a line chart (or a scatter chart) with time-series data. My dataset includes a time stamp field (yyyy-MM-dd hh:mm:ss) and some floating-point temperature values like this:
    2014-05-01 08:00:00, 123.4, 115.1, 109.2
    2014-05-01 08:00:10, 123.6, 116.0, 109.8
    The desired outcome has the date / time along the X-axis with data points spaced proportionally in the X dimension and plotted in the Y-dimension according to the temperature. The interval between the time stamps is not always the same, so numerical scaling is required on both axes. The desired chart would show a temperature scale along the vertical axis, three trend lines for the three series of temperature data and times shown on the X axis label.
    I've played with several options in an attempt to make this work. On the data tab, it would seem I would want to select "on change of" and then my time-stamp field. However, with this selection, I can only use summary values and end up with a chart with a single data point for each series. I don't need or want any summary calculations carried out on the data, I just want to plot it so I can look at a trend over time. I can get trend lines if I select "for each record" on the data tab of the wizard, but then my X-axis is meaningless and the horizontal scaling is misleading unless the interval between my samples is constant.
    I would welcome any suggestions on how best to accomplish this with Crystal Reports.
    Thanks for reading.

    Jamie,
    Thanks for continuing to reply. I am getting close, but still no success.
    Here is the procedure I've followed and problem:
    Put chart in RF section
    Start Chart Expert
    Chart Type = Numeric Axes, subtype = Date axis line chart
    Data tab
    On change of datetime field
    Order... ascending, printed for each second
    Values avg of my data fields (must select summary when on change of is used)
    Right-click on X-axis label, select Group (X) Axis Settings
    Scales tab: base unit, major unit and minor unit can only be set to days, months or years
    I cannot set the minimum and maximum date with resolution other than day
    Right-click Chart, select Chart Options...Axes tab: show group axes set to show time scale
    No matter the setting I use, I can't find a way to adjust the resolution of the time scale lower than days.
    I tried using a formula to extract only the time portion of my datetime field. I used that as my "on change" data series, hoping maybe CR would automatically recognize I was looking at a fraction of a day if I did that. No good - now it gives me a date scale with the dates showing up as the beginning of the epoch, but I can still only get resolution of integer days.
    Thanks for your patience and persistence.
    - Max

  • Creating Scatter chart for more than one column

    Hi,
    I have 2 columns of sorted numbers, when I select one column at a time and create a Scatter type chart, every thing is OK,
    But I want a chart with both columns in it, and when I select both columns and select a Scatter chart, Numbers takes the Group1 column as X axis and Group2 column as Y axis and draws me this chart whiich is not what I want!
    When I try this type of chart the chart is something like I want, but not with connected lines.
    How can I draw a Scatter chart with 2 columns of data in one chart?
    Thanks in advance,
    Regards,
    Hadi

    Thanks Jerrold, The problem was the first column, on the left of Group1. that column should not be as header. I created another table like this and the Share X Values command worked like a charm. I really don't know why!?

  • Time scatter graph class cl_gui_chart_engine

    hello
    i need to biled graph that the y pivot is date and hour and the x is caracteristic but
    i whant to show the x pivot divied by  motnth 
    for that use i am tring to use time scatter graph.
    and my question is how to write the categories and the  series_table in the sap program
    thank you

    Hello,
    I suggest you to use the Chart Designer (you can find it here : http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/e0a9ba90-0201-0010-d3a2-9cb376b5e181 ). A pdf document explains how building the XML data file.
    You can also read this article : http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID0627021950DB01268469089299731926End?blog=/pub/wlg/13313
    Regards,
    Vincent Choupaut

  • Business Graphics: Time Scatter

    Hi
        By default Time scatter graph shows the X Axis values in Year and Month where the Format is fixed as yyyyMMdd;HHmmss. My Requirement is to show them in Minutes and Hours
    Eg:    
            ^ Y
    Pnts |
                                                                  X ->
    Mnts         00   15  30  45  00 15 30 45  00 15  30  45
    Hr                       2                   3                  4
    How can i do this?

    I hope that can help you:
    Open the Chart Designer for your Graphic
    There you have to select "Time axis" --> "Line" in the Overview window (top right).
    Now in The Line Window (bottom right) you can set 3 Line Parameters.
    You have to set:
    line type1 = Minute
    line format1
    line step1 = 15
    line type2 = Hour
    line format2 =
    line step2 = 1
    line type3 = None
    line format3 =
    line step3 = 0
    You should also select a useful Timerange for TimeAxis. If it is to long you will see no numbers.

  • Scatter charts with dates

    I am trying to create a scatter chart which has date on the X-axis and meter reading on the Y-axis. The date/time intervals are not regular so I can't use a line or bar chart, but I can't seem to get the scatter chart option to accept the series for the X-axis with the dates in it. Is what I am doing possible in Numbers or will I have to revert to Excel
    Many thanks for any help,
    John Perry.

    The Scatter chart requires sets of numerical values.
    Date_time aren't numerical values so as you see, we can't chart them.
    But it's easy to build a workaround.
    Here column B contains dates.
    In column C, I uses:
    =B-DATE(2008,1,1)
    which returns numerical values
    So, I was able to chart C2 … D11
    To refine the result, disable the display of labels on X axis and build a text block with the dates as I did for Graphique 2-1
    Yvan KOENIG (from FRANCE jeudi 18 décembre 2008 20:48:14)

  • ChartDesigner  cl_gui_chart_engine time scatter

    Hello
    does any one knows how to write the xml data for time scatter
    using the cl_gui_chart_engine.
    thanks very match for information abut that
    shlomit

    Hello,
    I suggest you to use the Chart Designer (you can find it here : http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/e0a9ba90-0201-0010-d3a2-9cb376b5e181 ). A pdf document explains how building the XML data file.
    You can also read this article : http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID0627021950DB01268469089299731926End?blog=/pub/wlg/13313
    Regards,
    Vincent Choupaut

  • Using a formula as an axis label on an x-y scatter chart

    I have a report with an x-y scatter chart and I want to be able to use a Formula Field (called xAxisLabel) in the x axis label.  In the Chart Options | Title tab there is a place to enter the text you want for the X-Axis label, how do I include the Formula Field in this text.  I have tried the following but each time the text I've entered as the X-Axis label is displayed instead of the result of the Formula Field .
    @xAxisLabel
    So for example if the Formula Field xAxisLabel returns the text 'ng/ml' I want the x axis label to be 'ng/ml' not ''

    hi,
    You can't paste the formula field in Chart Options -> Titles tab.
    Workaround is
    Obviously, you need to empty the X-axis text.
    Adjust the "Chart Frame" height manually up such that some space is available at the bottom of the chart.
    Then Place a text box manually at the bottom of the chart and Drag the formula field into text box.
    Ensure "Can Grow" option is checked for that text box.
    Regards,
    Vamsee

  • How can I label data points in a scatter chart with text strings?

    Post Author: Bill B
    CA Forum: Charts and Graphs
    I need to create a Scatter Chart, with a text label for each data point instead of the xy coordinates. A legend will no longer be necessary.Also, I want to draw "cross-hair" lines on both the x and y axes centered on one particular data point.Any ideas?

    Post Author: ebobo
    CA Forum: Charts and Graphs
    Hi
    I have the same problem here, did you find any solutions.
    Here we are ok if the dimension is displayed in the scatter instead of the measurements but the only options i founds was "Show data" and that option displays the values of the xy.
    pls let me know if anybody found any solution for this problem

  • Scatter chart with two series?

    I have a table showing my cat's weight each day. (He's on a much needed diet and it's important to make sure he's losing weight, but not more that about 1% per week, as I experiment with his diet.) I created a scatter chart with the date on the X axis and his weight on the Y axis, and I made a 7 day moving average trendline to show his progress with most of the random daily fluctuations evened out. So far so good.
    I added a column to the chart with a function showing what his weight would be each day if it decreased 1% per week from the average of the previous week. I would like to add this column of data as a second series on the scatter chart so I can make sure he's not losing weight too fast. But I can find no way to do this.
    I had no trouble showing both series on a line chart. But no luck with the scatter chart. I tried creating a new scatter chart using all three columns of data, and I tried dragging the third column of data to the original scatter chart.
    Is it really possible that Numbers '09 cannot show two data series on a scatter chart? Or is there a way to do it?
    Thanks for any assistance.
    Bill

    Hi Bill,
    Maybe this will help. A Scatter Chart displays data pairs, such as a date and a weight. A single column of data would be only one half of the data-pair set. Select both the X and Y value columns for the second set and then add to the Scatter chart.
    Jerry

  • Scatter Chart Error Bars Help

    I'm new to using iWork for my lab reports and today, while I was plotting a scatter chart, I had to put some error bars on the points in percentage form. The value for the x-axis was 0.5% and the value for they y-axis was 1.5%, and when I tried to input these, the only thing I got was the error sound and the error bars returning to 3% and 1% respectively. Anyone know why this is happening and how i might resolve this issue? Thank you in advance.

    Angelos,
    I'm sure that your eyes are sharper than mine. Still, if your error bar is shorter than the radius of your symbol, you aren't going to see it. The standard symbols are roughly 4mm in diameter, based on the Numbers Rulers. Let's say you have a 100 mm tall chart, an average graphic size. A 0.5% error bar would be a maximum of 0.5 mm in length, unless you suppress the axis zero, and would be hidden behind the 4 mm dia. data symbol. Yes, you could see a 3% or 4% error bar, but I'm not sure everyone would recognize that it was an error bar and not part of the data symbol.
    Regards,
    Jerry

  • Bubble chart with scatter chart type and different bubble sizes

    Hello everybody,
    I would like to create a bubble chart (scatter chart) within Oracle 11g and Apex 4.2 with the standard chart types that come with Apex (anychart).
    I want to integrate two different KPIs (key performance indicators) in the chart, one for each axis (x and y) and additionally the size of the bubbles shall represent the size of the company, the KPIs belong to.
    That is to say, every bubble represents a company with two KPIs and its size.
    Now, I have problems changing the size of the bubbles. Can someone give me a hint where to start or how I could achieve this with  a standard sql query  (series) !?
    Is that possible with the standard charts (scatter type)?
    Can I control the color of the bubbles?
    How can I control the starting and ending points of the axes in order to show all bubbles completely even if they are e.g. 0,0 (x,y)  (this would show only a quarter of the bubble) or 0,3 (which would show only half of the bubble).
    I will be very thankful for some hints.
    Thank you very much in advance.
    Johnny

    Go to any chart and look at the examples.  You can view the xml, there are bubble chart examples.
    AnyChart - Cross-Platform Flash Charting Solutions For Your Project

  • Line Time Series Chart not working

    Hi All,
    I have one Line Time Series chart where on the X Axis i have taken one date and on Y axis one Sales Figure.Now on the Measure Lables i have taken on dimension as Customer.
    So the chart will give me something like trend which customer has how much sales figures daywise.
    Now the issue is that it shows the trend for one customer correct and shows the line but if i select second customer the graph doesnt show the line just dot for the second customer.
    Any help in this regard

    Thanks Vinod for the reply.
    Second customer doesnt have data on consecutive days but there is no pattern in that.He has data on 3rd,7th,8th,10th,15th day.
    But for all these days for the second customer dots are coming but not in the case for First Customer.
    Regards

  • Conditional formatting doesn't work with scatter chart

    Hi,
    I am working on OBIEE 11g(11.1.1.7.0) and trying to create scatter chart with conditional formatting. But this is giving issue and conditions are not getting applied.
    suppose I have take columns "product numer","product","office","product type","Revenue" & "Actual unit price"
    I created the scatter chart using above columns and applied below conditions.
    if revenue is equal to/ is in 1080 then color is yellow
    if revenue is less than 1080 then color is blue
    if revenue is greater than 1080 then color is red.
    After applying all the condition, 1st condition is not getting applied. All the charts are showing blue and red color only.
    Anyone have any idea about this issue?
    Thanks
    Krishna

    looks like it is bug in 11.1.1.6.2 which is not fixed in 11.1.1.7.0
    Bug 14286482
    I tried it locally with 11.1.1.7.0 on dimension column the condition filter is applying but not on measures !
    thanks,
    Saichand

Maybe you are looking for