Time Schema : TIP entry not generated

Dear Expert,
When there is OFF day for an employee and full day record is present in 2002. No TIP entry has generated, while if there is not OFF and 2002 record is there then TIP entry generated by function P2002.
Regards
Ajay

Option 1: Please review standard PCR TE30. This PCR delimits certain time pairs on the basis of their status.
You can copy this PCR and modify it to meet your requirements.
Option 2: My guess is you are using a custom schema - so please do go through the schema and the time evaluation run to ensure that the P2002 function is called - which means to say that ensure that your schema does not bypass the P2002 function if the day type of the day in question is 1 (off/paid).
Lastly, please do post more details about your problem whenever posting a message. There could be many reasons why a certain functionality is not working for you and, the more details you provide of your problem, the quicker it is to pinpoint a solution.

Similar Messages

Planning File Entry not generated for items releveant to PM

MRP procedure used for material is reorder based planning , in April -09 the stock for this material is consumed and becomes
zero (reorder point is 8 ,Maximum Stock Level is 8 ) and after that in MRP run the requirement is not generated .
But as per the setting of reorder point PR should be initiated.
When checked the MD21 , material is not flagged ,
I want to know the specific reason why only this material is not flagged for MRP run.
What all settings i can check ?
MATERIAL TYPE : YMRO OP Maint/ Repair/OperSup
Lot size : Repl. to max. stock level after cov. req
Procurement type : F

Hi,
Run the reports MDRE & MDAB to ensure the planning file entries are correct.
About your query what might have caused a entry not to be in planning file, well it could be many. So run the above reports & then run MRP & check the results.
Regards,
Vivek

Accounting entries not generating during return deliver PGR

Please any body can help me i am creating a return delivery when doing PGR it should be created the material document as well as accounting document. But the problem is it is only creating material documents i.e. only quantity is updating but accounting entry is not generating. Even i have tried in OMS2 by quantity and value update.
Please help me give me the solution.
Regards.
Lalxmikanta Das
<b><REMOVED BY MODERATOR></b>

Hi Das,
Accounting documents are created when billing documents are generated. Accounting documents are never ever generated when a returns delivery document is created.
If u have created billing document for normal sales process and if, an accounting document is generated, One more accounting document is going to be generated when u Cancel the billing document.
In ur case....If U have created a returns delivery document, create credit memo w.r.t returns delivery document. Then an accounting document is generated if ur account determination is configured in ur system.
Regards,
Praveen.

Palnning entry not generated for the material

Hi,
We RUN the MRP with MD01, but for for some material the PR are not generated, with MD01 I checked the palnning file with MD21 there is no entery for that material but when we RUN single level MRP with MD03 for that material it creates the PR so what can be the problem as for some material the PR are not generated with MD01 but it generates with MD03 all MRP data is proper in material master.
regards,
zafar

Hi,
Generally the planning file contains a list of all materials which has a valid MRP type in material master and relevant to the planning run. As soon as a material master record is created with valid MRP type, it will be automatically included in the planning file. You can find it in transaction code MD21.Whenever system find MRP relevant transactions i.e Stock updation,Receipt,Issues etc it will be included automatically in Planning file with appropriate indicator(NETPL,NETCH etc.).
Only in some exceptional cases, it is necessary to make an entry in the planning file manually.For an example after run MRP ,that material relevant Indicator will be removed. But still if you want to force it for next MRP run,you can include it manually..
And Please also check in material master entries properly maintained or not.
Kuber

Re: BPC 7.5 SP7 - Consolidatin Entries not generated

Hello,
I would like to share you all the following is a scenario:
I am using the following script for consolidation:
*RUN_PROGRAM CURR_CONVERSION
    CATEGORY = %C_CATEGORY_SET%
    GROUP = %GROUPS_SET%
    RATEENTITY = GLOBAL
    TID_RA = %TIME_SET%
// ENTITY = %C_ENTITY_SET%
*ENDRUN_PROGRAM
*RUN_PROGRAM CONSOLIDATION
    CATEGORY = %C_CATEGORY_SET%
    GROUP = %GROUPS_SET%
    TID_RA = %TIME_SET%
*ENDRUN_PROGRAM
I am trying to run RULE040 - IC Elimination.
Currency conversion is executing successfully and generating entries; moving data from NON-Group to Group.
The consolidation script is also executing successfully. However, no entries are generated.
0 Submitted, 0 Success, 0 Fail
I checked all related dimension properties. Looks fine.
If any of you came across the above scenario please feel free to share.
Thanks in advance
RJ

Hi,
Can you send a screen-shot of your business rule table for this please? Can you also send a screen-shot of your Web Admin application parameters for your Finance app and your Ownership app?
If the package completes with no errors but no records generated, that usually means there is nothing to process - so either your source data is not in the correct place, your ownership data is not correct, there is a WebAdmin parameter missing (not likely as no errors), or your business rule table isn't correct.
Tom.

FAGLF101- Entry not generated

Hi, Experts,
For Reclassification of receivables I have done the configuration, when I run the report I do get the line items, which are more than one year old, but the entry is not getting posted. I also do not get any error message. I have maintained the adjustments and target accounts as wel. What could be the reason?
Please guide.
Regards
Shailesh

Dear Shailesh,
Please make sure customizing is maintined correctly in OBBU, OBBV, OBBW and OBBX.
Additional information regarding the customizing of the sort method and the account determination (transaction OBBU) please note that the categories 'Receivables' and 'Payables' refer to the debit/credit balances of the selected items. Within this category you can define whether postings are to be made for customer/vendor/GL accounts.
I hope this information helps.
Best regards,
Suresh Jayanthi.

Background MRP Run Some times Planned orders are not generating.

Dear All,
We run MRP in the background at plant level once in a month. Some time we do not get planned order for the material in MD04. Than we run MRP (Selected material only) manually through MD01 considering MRP control parameter 13132.Than only we get planned order. Plesae let me know why it happens? Please give your comments on this.
Thanks & Regards
Kundan Kumar

Dear Kundan Kumar,
First check the output list or the results of MRP run in SM37,find out for how many materials it has
throwned out error,I hope in this list you can find out the materials.
Then the next step you have to check once again the material master settings.
Instead of running in MD02,first check whether was there any issue in master data,or if this happening
repeatedly for the same materials and work around.
Regards
Mangalraj.S

Utl_file not generating file but no raising no exceptions

The utl_file_dir is set to /tmp/usr on my system. I am trying to write a simple file in this directory as follows :
declare
l_filehandle UTL_FILE.FILE_TYPE;
begin
l_filehandle := UTL_FILE.FOPEN('/usr/tmp', 'test_file','w');
utl_file.putf(l_filehandle, 'test');
utl_file.fclose(l_filehandle);
end;
When i run this, i do not see any errors but at the same time the file is not generated. Any ideas what the issue may be.
I ran this from both sqlplus client and from the unix server but no luck in both teh cases. The procedure just completes without generating the file.
please help
thanks
Satya

thanks for the response, apparantly it was creating the files on a different server. I'm not sure why or how.
But thanks, problem solved !!

VPN tag not generated

Hello group,
Recenlty I'm having some problem in my production PE routers. At times, the PE is not generating any MPLS VPN tag. When this happens, a syslog comes saying:
"Jun 30 10:16:16.169: %TFIB-4-FIBCBLK: Missing MPLS Forwarding Information Base table for tableid 65535 during Route Tag Change event"
On the PE, 'show ip cef vrf xxx prefix' does not show any local tag [attached].
So, on the upstream PE no MPLS-VPN tag is there except for the top most label for downstream PE.
To resolve this probelm, I enable and disable cef on the VPN interface by 'no ip cef/ ip cef' command. Then it works fine.
The IOS version is: c3745-js-mz.122-15.T14
Might be, someone in the group find any reason to this type of problem.
Regards,
Dabraj Sarkar
Grameenphone Ltd

Dear Gautam,
Thanks for the response. Could you please explain non-recursive route in this context? I'm running static routing between PE-CE. Does non-recursive route mean that to configure exit interface along with next hop IP in the static route definition?
I'm trying to change the IOS. Any suggestion regarding stable S-train codes?
Regards,
Dabraj

After Canceled Excise Invoice, GL entry not revers

Hi Expert,
Reverse accounting entry not generated for canceled excise invoiceRegards
BK GAIKWAD
M9881908615

Sir,
my problem is when we have canceled the Excise Invoice Payble duty GL not revers.
Regards
BK GAIKWAD

Every time I sync my iCal computer with my iPhone 4 or iPad, duplicate entries are generated on both systems. What am I doing wrong or how can I avoid the duplications?

Every time I sync my iCal on my computer through iTunes with my iPhone 4 or iPad, duplicate entries are generated on both systems. What am I doing wrong or how can I avoid the duplications? I have been doing this for several years and this problem is a more recent issue, like in the last 6 months. I have been deleting the duplicate entries, on both systems, but some duplicates reappear through "general" entries that are connected to the correct color for a Calendar, but not the name. I am going nuts and wasting tons of hours trying to get the 3 calendars to sync without generating duplicate entries.

Choose one of the Calenders on ONE of the computers OR the MobileMe as the Master / correct account.
The REINITAILISE the data of MobileMe within preferences on the computer defining the datatransfer correctly (in the advanced box of preferences). The synchronise iphone contacts and calender directly on-line to MobileMe.
I posted a question on this today, and gave my own reply !
Regards,
Kevin

Income tax is not generating on Bonus for second time through off cycle

Dear All,
I have an issue related to bonus. We have given bonus off cycle in the month of August 16th income tax was deducted on bonus amout. Now again mgt is giving bonus through offcycle in the month of November 10th but the problem is Income tax is not getting calculated in this month for bonus. We have checked the calculations every thing is fine.
We have created 1 wage type for 1st time bonus as Special Bonus and 2nd time we have created another wage type as Diwali bonus. We have done configuration same as 1st wage type special bonus for Diwali bonus wage type.
Let me know where it went wrong.
Rgds,
Prasad

Hi Narendra,
Thanx for the response, i tried the above but not generating WT/460. can you explain the logic.,
Changed BON5 to BON3
created new Tax code ZTDR from STDR
Assigned Bonus WT ( in 0267) to ZTDR in Table T7INT9
didn't understand why /401 or MTDR or 9TDR
Thanks
Sanm

I use floating time zone with all of my iCal entries. But then the times of the entries do not print when printing month view. Is there a fix for this?

I use floating time zone with all of my iCal entries. But then the times of the entries do not print when printing month view. Is there a fix for this?

Sorry to have repeated this question as if I were answering it. Just a mistake. I'm just now learning how to use this site.

Batch number is not generating by the system at the time of Goods receipt

Dear All,
This is regarding Batch number that the system generates internaly at the time of Goods receipt,but the same is not generating the batch number.
I checked all the configs but i could not trace it out.Can any one help me to solve the issue.
Thanks in advance,
With Regards
Vinod

Hi,
Follow the steps:
1.Field---VFDAT adn table-MCHA should be created as a charecter in CT04signed to a class in CL02N.
2.create MM01 and add the class to it in classification view.
3.In mm01 plt storage1 view give data for remainning shelf life and total shelf life and in purchasing view activate batch management.
4.OMJ5- activate SLED for your plant and mvt type 201.
5.opj2- set BD for your plant.
6.create sort sequence in cu70 and assign your charecteristic value to it.
7.create batch serch strategy in MBC1 for access sequence(plt/matrl/mvt typ) create a condition record.
8.Do a GR using 501 and enter SLED related details.(production date and exp date values)
Repeat the above step and enter diffrent values for SLED details.
So now two batches are created with SLED as the charecteristic.
9.Do a GI using 201 mvt tye in MB1A and enter * in batch field(system will determine the batch using the SLED value basedon the criteria(ascending or descending which was set in the sort rule.)
Reg,
Deepak.

[svn:fx-trunk] 12077: Although Spark RichText does not support link formats , modifying compiled FXG to not generate ActionScript code that will cause compile time exceptions .

Revision: 12077
Revision: 12077
Author:   [email protected]
Date:     2009-11-20 18:16:32 -0800 (Fri, 20 Nov 2009)
Log Message:
Although Spark RichText does not support link formats, modifying compiled FXG to not generate ActionScript code that will cause compile time exceptions.
Removing references to Flex Builder 3 in RPC.
QE notes: N/A
Doc notes: N/A
Bugs:
SDK-24305 - Link format property nodes cause errors on RichText in FXG 2.0
SDK-24322 - A couple references to Flex Builder 3 in Flex 4 LangRef (and code comments)
Reviewer: Deepa
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24305
    http://bugs.adobe.com/jira/browse/SDK-24322
Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/xml/XMLDecoder.as
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FlexFXG2SWFTranscoder.java

Time Schema : TIP entry not generated

Similar Messages

Maybe you are looking for