Time Search help

Hi,
Can we change the time in the default search help as 00:00:00..
By default its displaying current time..Is there any possibility??..
Thanks
Sri

Yes, you can default the field value in AT SELECTION SCREEN OUTPUT.

Similar Messages

Search help is not triggering second time in interactive form

Hi,
I have online interactive form in WDABAP. And I have few search helps in the form, If i click on any search help it is opening and I can select the value and the same is populated to the field. But if i click it again search help is not opening.
Only one time it is triggering and also after I clicked one serach help, other search helps also dont work.
Can some one guide me? Is it something to do with scripting or any other configuration?
Now Im using ALD7.1 and Reader version is 8.1.0.
did any one faced this problem? Really appreciate if some one can help me on this.
Regards,
Ravi

hi,
The following code is generated in the preopen event of the valuehelp.
// DO NOT MODIFY THE CODE BEYOND THIS POINT - 710.20061129084151.349066.349066 - ValueHelpDropDown.xfo
                   var processingValueHelp = ContainerFoundation_JS.getGlobalValue(event.target, "processingValueHelp");
                   if(processingValueHelp == false) {
                       ContainerFoundation_JS.setGlobalValue(event.target, "processingValueHelp", true);
                       this.rawValue = "";
                       this.clearItems();
                       ContainerFoundation_JS.SendMessageToContainer(event.target,
                                                                     "valueHelp",
                                                                     this.dataNode.somExpression.replace(/(xfa.?\.)(datasets.?\.)(data.*?\.)/, ""),
                                                                     this.rawValue,
                                                                     event.target.mouseX,
                                                                  event.target.mouseY);
                   // END OF DO NOT MODIFY
I have tried placing this code in click event instead of preopen.But still no use. Can we make changes to this code? Can some one give me some idea what changes need to be done..
Regards,
Ravi

Custom Search help in Record Working Time

Hi,
We have a requirement to add a custom field on RECORD Working Time ( ESS). This field has been added and custom search help is assigned to the data element of the field. The values in the F4 help should vary based on employees department.
The related code for this requirement is written in the serach help exit. The F4 help is working as expected from backend ( ECC) but not in Portal (ESS).
I have added the custom field in TCATS_SHLP_ITS. After maintaining this table all the values in F4 help are displaying , whereas it should only display the values under employees department in Record Working time.
I understand the class cl_xss_cat_value_help_general is responsible for the search help in ESS is there any user exit or enhancement available for this class in order to control the serach values on ESS.
Thanks in advance.
regards,
Pradeep

note that search help of CAT2 and record working time are different!
these are teh steps
please modify the following in the table TCATS_SHLP_ITS as follows:
1. Execute the T-Code SM31
2. Enter the table name TCATS_SHLP_ITS.
or check the class
CL_XSS_CAT_VALUE_HELP_GENERAL
or check
CL_XSS_CAT_VALUE_HELP*
take an example from Sap note 914125

Hi can you please help me to fix my iPhone 5 when I update it to the iOS 6.1.2 my carrier signal indicator states searching all the time please help me what to do

HiHi can you please help me to fix my iPhone 5 when I update it to the iOS 6.1.2 my carrier signal indicator states searching all the time please help me what to do

Hi Samantha,
Are you aware that if you restore your ipad that you will lose all data from your ipad and very difficult to get it back unless you had previously made a back-up of your data on itunes or in the cloud. and that would be on the computer you set those up on. (There are some independent apps out there that might help restore data but I don't have any experience with them...)
Also, I think if you restore on another computer you're supposed to have administrator rights and have the latest itunes update. And I think if you sync (if restoring is considered syncing with another computer, you'll be locked out of your computer or a new one.)
I don't know if there is a way for you to safely eject your ipad from your mom's laptop and find another way, but please read this
http://support.apple.com/kb/ts1275
Also, I suggest you start a new post and title it something like First, stuck on update and now on Restore on another computer. Please HELP! And then tell the story of your problem that you originally included and your follow-up efforts to restore given a suggestion on previous post (though I think you SHOULD AVOID RSTORE if you can.) And refer them to your original post
https://discussions.apple.com/message/22050045?ac_cid=tw123456#22050045
Hope this helps and if you can get back to your ios before the upgrade, stay with it. I hope it all works out for you.
FYI - If it's a new or refurb bought within the past year you might be able to have it replaced by Apple.

Search help for time

HI,
I need a Search help for time field in case of input field ie the one similar to the date field.In webdynpro we have mapped the Tims data type to our input field.here Tims data type is the data type for time in the backend(R/3 system).Pls help me out its urgent.Pts will be awarded to any of the helpful solutions.

Hi Nikhil,
Create an attribute of type 'time' in context. And inputfield to this attribute.
Later, while calling BAPI, you can pass this value to Tms type field.
Regards,
Deepti

To implement search help for date and time fields details

how can i implement search help for date and time fields in screen painter

Hi
Declare the variables as sy-datum and sy-uzeit or any other pre-defined data typ of date and ime types. Serach help will automatically comes.
Aditya

Form disappears when clicking search help multiple times

Hi All,
I have created an interactive adobe form with Web dynpro application.
We have multiple multiple search helps (custom and standard) on the form.
when the user clicks on any search helps multiple times (4-5 times), the whole form disappears.
Please provide some solution / hints.
Best regards,
Meep.

We are not facing this problem on Adobe 9.4. The newest v10.1 has this problem.
Also, this issue is only on 1 server and on other, it works fine.
We are using Native control with ZCI layout.

Extra fields in search help window in Record working time EHP5

Hi Experts,
Can you please let me know how to add additional fields/select options in search help window for Record Working Time ?
My system is EHP5 NW 7.02
I have added the custom search help for the respective filed in table " TCATS_SHLP_ITS".
I can see this table is having entry for only 4 selection options and 6 value fields for search help display.
But in my custom search help programme is having 8 select options(for advance search) and 10 display fields on the search window. It's working from CAT2 transaction but when I am running through webdynpro timesheet, I can only get 4 select options and 6 value fields.
Please let me know how to make the other fields available.
Thanks in advance.
Sonia

Hi Siddharth,
Thanks for your response. In that modify possible entries screen (Details view) I can see the search help is only having 4 select options and 6 display fields.
So as per my understanding max 6 display fields/4 select options can only be displayed on search window.
My requirement is to display more fields on search help OVS window.
Can you please suggest.
Thanks ,
Sonia

Search help window opening two times

Hi folks,
i found one of wda application is integrated into portal.on portal side if i press on search help symbol then it opened external window two times.How can i make that to one window

External windows are never used by search help becuase they open in a separate user session - making data communication back and forth very difficult. When modal windows are triggered, the parent window is frozen and no longer accepts input.
When you say external window, what are you seeing. Is it actually a separate browser window that can be dragged outside the confines of the parent window. If this is really an external window, then it doesn' seem like this is a search help.
Have you studied the WD Component. Can you see what kind of search help this is. What triggers it? A normal button or the search help button attached to an input field.

Search Help in Select - Options for Time field

Hi,
I have a select option which is a time field.
For date field the F4 help is automatically generated.
How to get F4 help for time field.
Regards,
Remo

Selection-Options or normal field - it doesn't matter. There is no system delivered value help for a time field. This is documented in the online help:
There is no automatic F4 help for data element TIMS.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/9f724642314aabe10000000a42189b/frameset.htm
You would have to create your freely programmed value help if you want something like the time value help available in the SAPGUI.

Search help - Display only 500 entries at one time from Internal Table

Hi,
I have an internal table with 1000000 entries. And when I use F4IF_INT_TABLE_VALUE_REQUEST function module to display the search help with internal table, it gives me dump. Can somebody help me - how to display limited values when we process search help?
Thanks,
Sheel

Hi Sheel
u have a variable callcontrol-maxrecords in search help exit to limit the number of records.. check my weblog for more help: https://wiki.sdn.sap.com/wiki/x/du0

How to populate data in MPP through F4 search help(the field should get filtered as per key)

Dear Experts.
I am new to ABAP and hence trying jmy hands on various ways of peforming a task.
I have a requirement. I want to maintain a database tables through MPP : ZLT_Auftrag (Refer Screen Shot 1: Doubt MPP1) and ZLT_Kunde (Refer Screen Shot2: Doubt MPP2)
The fields of ZLT_Kunde are: K1, K2, K3
The fields of ZLT_Auftrag are: A1, A2, A3, A4, P1 P2 and P3 are related as per the key field "A3"   (Here A3 = K2)
I want the User to be able to Maintain this table through the Screen that I had created using MPP. (Plz refer the attached Screen Shot3:Doubt MPP3 of the SCREEN in MPP)
When I populate the Kunde name(K1) in the SCREEN (Can be done by F4 Search help), then on hitting the pushbutton "Get Kunde" the kunde Code (K2) appears . Now from here it can be deleted or even a new Kunde name and code can be saved dirctly to the database table : ZLT_Kunde. (Refer Screen Shoot4: Doubt MPP4)
For Example for Kunde (K1)= BASF, Kunde Code (K2) = BSF, the Auftrag should be all those values from ZLT_Auftrag (where A3 = BSF)
When I try to populate the Auftrag value on the SCREEN then on hitting F4 (already created for table ZLT_Auftrag in se11) then I get all the values of Auftrag (A1) from the table ZLT_Auftrag. (Ply refer Screen Shot 5: Doubt MPP5)
MY REQUIREMENT: Here I want that either through F4 help or through drop down ONLY those values of Auftrag-A1 should appear on the SCREEN which satisfies the condition: A3 = K2
I am unbale to get how to do that.
I need your valuable suggstions.
Regards
Chandan

And the code of the MPP is:
*& Module Pool       SAPMZDEMO_MPOOL_03
PROGRAM SAPMZDEMO_MPOOL_03.
TABLES: ZLT_MITA, ZLT_Kunde, ZLT_Auftrag, Zlt_Stdsatz.
DATA: flg_lock TYPE c,
*      indx TYPE i,
*      indxk TYPE i,
*      indxa TYPE i,
*      TCNT TYPE sy-tabix,
      lv_msgv1 TYPE sy-msgv1.
*DATA: it_mita    TYPE TABLE OF ZLT_mita,
*      it_kunde   TYPE TABLE OF ZLT_KUNDE,
*      it_auftrag TYPE TABLE OF ZLT_AUFTRAG.
*&      Module STATUS_9000 OUTPUT
*       text
module STATUS_9000 output.
SET PF-STATUS 'ZSTATUS01'.
* SET TITLEBAR 'xxx'.
If flg_lock is Not initial.
    LOOP at Screen.
If screen-group1 = 'G1'.
Screen-input = 0.
MODIFY SCREEN.
       Endif.
    ENDLOOP.
      MESSAGE s000(8i) WITH 'Mitarbeiter already locked by user' lv_msgv1.
ENDIF.
endmodule.                 " STATUS_9000 OUTPUT
*&      Module USER_COMMAND_9000 INPUT
*       text
module USER_COMMAND_9000 input.
*To Populate Data into Mitarbeiter through Pushbuttons
CASE sy-ucomm.
    When 'OK_GET'.
      Clear : flg_lock.
        IF ZLT_MITA-M1 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_MITA
            Where M1 = ZLT_MITA-M1.
*To create a Lock Object so that when two or more employees are accessing the same data
* at the same time then for the new user the data gets locked and only can been seen in
*display mode
        IF sy-subrc = 0.
        CALL FUNCTION 'ENQUEUE_EZLT_MITALOCK'
         EXPORTING
           MODE_ZLT_MITA        = 'E'
           MANDT                = SY-MANDT
           M1                   = ZLT_MITA-M1
*           X_M1                 = ' '
*           _SCOPE               = '2'
*           _WAIT                = ' '
*           _COLLECT             = ' '
         EXCEPTIONS
           FOREIGN_LOCK         = 1
           SYSTEM_FAILURE       = 2
           OTHERS               = 3
        IF sy-subrc <> 0.
          flg_lock = 'X'.
          lv_msgv1 = sy-msgv1.
        ENDIF.
        ENDIF.
        ELSE.
            MESSAGE S000(8i) With 'Enter Mitarbeiter Name'.
        ENDIF.
    When 'OK_SAVE'.
       Modify ZLT_MITA.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETE'.
        IF ZLT_MITA-M1 is NOT INITIAL.
            DELETE
            FROM ZLT_MITA
            Where M1 = ZLT_MITA-M1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
*     When 'OK_FIRST'.
*           indx = 1.
*     When 'OK_NEXT'.
*           indx = indx + 1.
*     When 'OK_PREV'.
*           indx = indx - 1.
*     When 'OK_LAST'.
*           Describe Table it_mita lines indx.
*To Populate Data into Kunde through Pushbuttons
    When 'OK_GETK'.
        IF ZLT_Kunde-K1 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_Kunde
            Where K1 = ZLT_KUNDE-K1.
        ELSE.
            MESSAGE S000(8i) With 'Enter Kunde Name'.
        ENDIF.
    When 'OK_SAVEK'.
       Modify ZLT_Kunde.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETEK'.
        IF ZLT_KUNDE-K1 is NOT INITIAL.
            DELETE
            FROM ZLT_KUNDE
            Where K1 = ZLT_KUNDE-K1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
*To Populate Data into Auftrag Through Pushbuttons
    When 'OK_GETA'.
        IF ZLT_KUnde-K2 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_Auftrag
            Where A3 = ZLT_Kunde-K2.
        ELSE.
            MESSAGE S000(8i) With 'Enter Kunde Name'.
        ENDIF.
    When 'OK_SAVEA'.
       Modify ZLT_Auftrag.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETEA'.
        IF ZLT_Auftrag-A1 is NOT INITIAL.
            DELETE
            FROM ZLT_Auftrag
            Where A1 = ZLT_Auftrag-A1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
*To Populate Data into Position Thorugh Pushbuttons
    When 'OK_GETP'.
        IF ZLT_Auftrag-A2 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_Auftrag
            Where A3 = ZLT_Kunde-K2.
        ELSE.
            MESSAGE S000(8i) With 'Enter Kunde Name'.
        ENDIF.
    When 'OK_SAVEP'.
       Modify ZLT_Auftrag.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETEP'.
        IF ZLT_Auftrag-A1 is NOT INITIAL.
            DELETE
            FROM ZLT_Auftrag
            Where A1 = ZLT_Auftrag-A1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
    When 'OK_EXIT'.
       Leave Program.
    When 'OK_CLEAR'.
      Clear : ZLT_MITA, ZLT_KUNDE, ZLT_AUFTRAG.
*              it_mita, it_kunde, it_auftrag,
      CALL FUNCTION 'DEQUEUE_EZLT_MITALOCK'
       EXPORTING
         MODE_ZLT_MITA       = 'E'
         MANDT               = SY-MANDT
         M1                  = ZLT_MITA-M1
*         X_M1                = ' '
*         _SCOPE              = '3'
*         _SYNCHRON           = ' '
*         _COLLECT            = ' '
ENDCASE.
endmodule.                 " USER_COMMAND_9000 INPUT
*&      Module user_cmd_9000 INPUT
*       text
module user_cmd_9000 input.
If sy-ucomm = 'OK_CANCEL'.
LEAVE PROGRAM.
ENDIF.
IF sy-ucomm = 'OK_EXIT'.
      LEAVE PROGRAM.
ENDIF.
endmodule.                 " user_cmd_9000 INPUT

Selecting multiple values from a search help

Hi Experts
Anyone knows if it is possible to select multiple values from a search help?
Thanks
Gaurav

Hi,
You cannot select mutiple values from search help as it is linked to inputfield and hence it will accept single value only. But at the same time, you may able to pass row of values to different inputfields.
Refer http://help.sap.com/saphelp_dm40/helpdata/en/3d/e53642e2a3ab04e10000000a1550b0/content.htm
Thanks,
Chandra

Collective search help in SRM 7.0

Hello all,
Does any body has an idea why the custom elementary search helps wont get displayed in SRM7.0 When we add for a collective search help.
For ex.. BBP_BUPA* SOURCE_OF SUPPLY is the standard collective search help where we added custom search helps to it,
While upgrading we try to implement the same in 7.0 also, But theya re not at all visible in the Drop down of Preferred supplier.
I tried to check web dynpro componenet WDR_F4_COLLECTIVE method in debug mode but was unable to trace it out,
Can any body help me how can i include them to standard collective search helps in web dynpro.
Thanks and Regards
geetha

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Search help how to restrict number of hits.

Hi,
I have created a search help in SE11, the search help reads a table view and the search help is connected to
exit HRMC_PREM_EXIT_A in HR. Everything works fine except for that I want to restrict the number of hits to 500, I don't want to get a result of 5000 hits because that search takes too long time.
Br Benita

Hello Benita
Set the dialog type of your search help = 'A' (dialog depends on set of values).
Regards
Uwe

Time Search help

Similar Messages

Maybe you are looking for