Time Series Graph with two Y axes in 11G?

Hi everyody,
Is it possible in OBIEE 11G to create a time line series chart with two Y axes (different scales of course) ?
Thanks,
Alex

Hi Alex,
Almost more than 1 year now on this and I am still looking for this. So far I dont see any direct option there to put this chart.
Let me know as well if you see any option.
Thanks

Similar Messages

How can i control graph with two inputs?

Hi,
i would like to ask you about the graph with two inputs
Normally, if i just give one input, they generate the graph with this input(y) vs time(x).
But now i would like to get the graph with my two inputs in x axis and y axis .
i want to control both of two axis. How could i do for it ?
i attached the file that i try to use "Build XY graph" to control both x and y axis with random number .
It can run but i don't know how come the graph show nothing. .
Actually , it have to show something like wavefrom continuously. am i right?
Could you tell me a way to solve it ?
>>>
what i want to get is ..
in Graph,
for x axis , ditance (always increases)
for y axis , vibration (vary)
>>>
Thank you so much for your time . I am looking forward your kindly reply.
With Respect,
Su
Attachments:
using Build XY graph.vi ‏59 KB

Hi NI9233,
Mind me to interrupt, I am just helping Mike to explain what he meant to you, refer to the graph:
Picture 1:
Double click on Build XY Graph, uncheck the clear data on each call
Picture 2 and 3:
Change your formula node into +1 Basic Function in Functions Pallette.
Hope that helps!
PS: I am sorry for the size of the image, seems I made a mistakes when I saved the picture.
Sincerely,
Krisna Wisnu
Message Edited by Krisna Wisnu on 11-19-2008 08:19 PM
Sincerely,
Krisna Wisnu
Attachments:
Clear Graph on Each Call.PNG ‏46 KB
+1.PNG ‏30 KB
+1_2.PNG ‏21 KB

How do I add moving averages to my time series graph is there a function on numbers on tr iMac?

I've created a time series graph on numbers on my iMac but I need to add moving averages. Is there a function an if so where is it and if not is there a way to get around it

Badunit,
Here is an example plot, data sorted from most recent data at top of the table...
You can see the moving average (of 20) is plotted from right to left.
The Moving Average calculation is now wrong, and should have been calculated and presented from oldest to most recent.
Here is the same data, with table sorted from oldest data at the top of the table.
The moving average is also plotted from right to left, and shows the correct Moving Average for the most recent data.
That is, it is calculated from oldest to most recent, with the last Moving Average data point plotted on "todays" date.
What I want to see is my table displayed from most recent at the top (the top table), and moving average calculated and displayed as per the bottom graph.
Edit: So, think about this some more,
I need an option to tell Numbers to do the Moving Average calculation from the bottom of the table up, not from the top of the table down.

Time Series Graph Show Inappropriate Data for Continuous Analysis

Hi All,
I have marked Month as the Chronological Key in my BMM Layer but still I am unable to view the data correctly in my Time Series graph because it shows Inappropriate Data for Continuous Analysis at the time of creating the Graph. Can anybody help me out with the same.
Thanks

What data type is your key? The chronological key is required for the time series formulas (ago etc.).
The time series chart requires a date or datetime data type to work - perhaps a new column with the first of the month/period would help? Regards,
Robret

Regarding Time Series Graph in OBIEE 11g

Hi,
I need to create a time-series graph in OBIEE 11g. However, the value for time on the x-axis of the graph automatically comes for days.
Is there any way to change it to hours or minutes?
Thanks,
Naman Misra

Yes, it shud be a prob. Try using seperate tables for fact n timedim

XY Graph with two Y inputs

I need to know how to graph a XY graph with two values of Y. I need to it to compare to different angles and I also would like to make them graph different colors. Currently i have an XY graph with one Y input using the XY Graph express VI. I found out how to set up for two simultaneous plots by editing the properties for the graph but I don't know how I can input another Y value to plot using the XY Graph express VI.
Thank You,
Phil

I never use the express functons but I think what will work is to use the merge signal function. Try merging the two x inputs together and merging the two y inputs together. I made a modification to the shipping example called Lissajous.vi to try a quick test.
Attachments:
lissajous_mod.JPG ‏54 KB

How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

Hi Libby,
Select all three columns of data. All three must be 'regular' columns, not Header columns, and the X values must be in the leftmost column.
Click the Charts button and choose the Scatter chart.
The resulting chart will initially show only the first and second columns of data, and the selection will have been reduced to show this.
Click the gear icon at the top left of the selection and choose Share X Values.
You should see a result similar to this:
Notes:
The values on my sample table contain a random element, so they have changed from thhe first image to the second.
The chart is as created by Numbers, with two edits:
Data points have been connected with curves, using the Chart nspector.
The curves were selected and their stroke increased to 2pts, using the stroke formating button in the format bar.
Regards,
Barry

Reeal-time 3D graph with multiple plots

Hello,
I realise this is a very complicated question and I would appreciate any healp anyone could give. I am trying to:
1- draw a 3D graph with three plots (plots are from coordinates read from XL)
2- do it in real time, so that only one point from each plot shows at a time (the previous points disappear)
Can anyone help me out? I looked at Sarah's advice and I got as far as the program that I have attached. I have also attached an XL sheet with random values (actually I didn't have any luck attaching two files).
I would appreciate any response!
Thank-you,
Confused
Attachments:
3D graph.vi ‏127 KB

IBAHKA wrote:
Could you look at this new and improved (yet not perfect program) and help me out?
Issues:
Why do the axis all change and why aren't the points drawn all at once? ALso, is it possible to retain in memory and plot more than one point from each plot at once?
The axis are changing because you didn't ask for constant scales. Just right-click on the 3D graph indicator and go to CWGraph3D/Properties... There a pop-up window will give you access to a number of settings. Explore. You will find how to allow the user to pan/zoom/rotate the graph, and to disable autoscaling...
The points are not drawn all at once because you pass them one at a time!!! To plot several points at once, you have to build an array with the proper number of points (initialise first) then you can rotate the array after plotting, and replace the first point at the next iteration.
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

Use of time series functions with horizontally fragmented fact tables

Hi Guys,
in OBIEE 10g it wasn't possible to use time series functions [AGO, TO_DATE] on horizontally fragmented fact tables. This was due to be fixed in 11g.
Has this been fixed? Has somebody used this new functionality? What the the limitations?
Tkx
Emil

Hello,
Can you give us some examples for "horizontally fragmented fact tables", we can tell you whether we can do that or not?
Thanks,

Accessing shared time capsule disk with two accounts

Hey guys,
I have an airport time capsule (5th gen) and want to access a connected USB disk with my Mavericks macbook. This basically works fine: i can mount it using the finder (usually I do an automatic mount when starting my account, since I put the drive into the Login Items for my user), and the disk is secured with a disk password.
However, I have a quite annoying issue when using two accounts on the same macbook, which is my standard use case as I share the macbook with my wife: Only the user that first accesses the disk can use it, the second user gets a "no access permission" error for the disk. The second user can then disconnect the drive and reconnect, but I find this very annoying, because I have to do it all the time, and I'm wondering if I'm the only user with this problem.
Is there any way to specify access rights for the drive, such that I can access it with both accounts simultaneously? BTW, I've already tried to define specific access rights on the disk (Context Menu > Get Info > Sharing and Permissions), and I tried to change the disk security mode to "With accounts" and "With device password" - none of it made any difference.

Only the user that first accesses the disk can use it, the second user gets a "no access permission" error for the disk. The second user can then disconnect the drive and reconnect, but I find this very annoying, because I have to do it all the time, and I'm wondering if I'm the only user with this problem.
That is how Apple built it. No fixes.. no repairs.. it is a hassle of protected type file systems. Windows you can do all sorts of fudgery.. but the lack of protection (amongst others) is why you use a Mac.
Is there any way to specify access rights for the drive,
This is not a rights issues.. it is that one user at a time is allowed. Each user must logout before the next user can gain access..
I do not know of any workaround.
Pondini recommends using disk image for data on the TC.. since you can otherwise mess up the TM backup. See http://pondini.org/TM/TCQ3.html
His comments don't apply to your usage of the USB drive.. but his workaround may help.
I am wondering if you create the sparsebundle on the USB drive and allow everyone access, once mounted on the computer it might allow two user accounts access at the same time.. Sorry I have no need to try it and I cannot recall anyone attempting.. but it might present a way around the issue.. !!

Graph with 2 y axes and x axis (x , y1 , y2)

Hello,
I have a requirement to show a graph in a alv grid(using oops) report. The graph will have two y-axis that will represent two different scales.(For examle axis Y1 will have Volume & axis Y2 will show price). Can we make such a graph in ALV? Please point out how we can go about to do the same.<b> Any sample code will be appreciated.</b> We are using a customised toolbar and the standard tool bar is disabled.
| ...........................|Y2(Value in $)
Y1(Volume)...........
X-axis(Date)
Points will be rewarded.
Note - We will be using Line graphs in this case.

What happens in your sequence structure is that the second fame overwrites the data from the first case.
You should create your two data-sets, and build an array of those, feed this into a for loop and then per data set, select the proper:
-plot (ActPlot)
-Y-scale (Plot.ScaleIdx)
-Y-scale to edit (ActYscl)
Then set the max and min, be aware that the second Y-scale should be created before running this code.
Another option would be to just auto-scale the Y-scales.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Error in Time Machine configuration with two usb disks??

Hi all,
I applied two 1TB usb disks to my Mac Mini with OSX 10.9 server (latest version) and configured them within the Server.app for time machine. As far as I understood, there should only be 1 backup destination 'backups' presented to my mac clients afterwards. But I always see 'backups' and 'backups-1', meaning both usb drives. Did I misunderstand the manual or is there something wrong with my Server.app?
Thank you for your help and best regards, BanditCH

Hi Wolfgang,
That just won't work. You can get a bigger external drive of 3TB for instance, that will work as one destination.
For this to work with 2 drives: every client needs to choose between two destinations, because both drives appear as a unique destination in TimeMachineServer. There's no way around it.
To be futureproof consider a dedicated NAS with 2 or more disks that supports timemachine so your capacity can grow when there are new bigger drives available. With 2 drives in a RAID mirror inside a NAS you have the best of both worlds. Client backup on a RAID mirror, when one drive fails it does not affect the entire backup. Connected to that NAS you can use an external USB disk for backup. Wonderful
Goodluck
Jeffrey

Does Time Machine work with two or more back up drives?

I'm starting to get a collection of smaller external hard drives. Can I use two or more drives to backup a larger primary drive with TM?
For instance, I have a 500 GB internal drive, and two 300 GB USB drives.

Me too. I think that a concatenated RAID would work, but I can't make my RAID do what it's supposed to do. See: http://discussions.apple.com/thread.jspa?threadID=1516416&tstart=0.

Can you use a control reference for a graph with two channels of data?

when i try to wire a 2-D array of data to the value property of a graph(strict control reference), it shows a conflict. The value data type only shows up as accepting a 1-D array input. I want to use control references to pass the chart data to my main vi. Will I have to change the waveform graph control reference into an array control reference to make this work?? This would require adding a while loop in the main vi to read the array data and update the graph data??

> when i try to wire a 2-D array of data to the value property of a
> graph(strict control reference), it shows a conflict. The value data
> type only shows up as accepting a 1-D array input. I want to use
> control references to pass the chart data to my main vi. Will I have
> to change the waveform graph control reference into an array control
> reference to make this work?? This would require adding a while loop
> in the main vi to read the array data and update the graph data??
I think the problem is that your waveform graph is set to take one type,
a 1D array of doubles, and you are wiring a different type. While
charts adapt to type when the data is wired to their terminal, they do
not adapt to data wired to their value property. If you change the
datatype of the graph from its terminal, then you should see the value
property change type also and you are set.
Greg McKaskle

IRepots time-series chart help!

Hi, i need help!!!...
i've a very simple table in a databas,
datatime (DATETIME) value (DOUBLE) template_id(INT)+
| datatime | value | template_id |
| 2008-05-09 09:00:00 | 0 | 1 |
| 2008-05-09 09:05:00 | 0.1 | 1 |
| 2008-05-09 09:10:00 | 0.2 | 1 |
| 2008-05-09 09:15:00 | 0.3 | 1 |
| 2008-05-09 09:20:00 | 0.4 | 1 |
| 2008-05-09 09:00:00 | 0.5 | 2 |
| 2008-05-09 09:05:00 | 1 | 2 |
| 2008-05-09 09:10:00 | 1.5 | 2 |
| 2008-05-09 09:15:00 | 2 | 2 |
| 2008-05-09 09:20:00 | 2.5 | 2 |
| 2008-05-09 09:00:00 | 0.1 | 3 |
| 2008-05-09 09:05:00 | 0.3 | 3 |
| 2008-05-09 09:10:00 | 0.5 | 3 |
| 2008-05-09 09:15:00 | 0.7 | 3 |
| 2008-05-09 09:20:00 | 0.9 | 3 |
i need to create a time-series chart (with two lines o variables in this case, cause i have 2 different template_id (1,2)) that shows on the X axis datatime and value on the Y axis. My query is shown bellow:
Select * from data_valueorder by template_id, datatime;
of course i need to filter... so, on the chart properties i created two series:
- first one:
Series Expresion: "template = 1"
X Expression: $F{datat ime}
Y Expression : ( $F{template_id}.equals(new Long(1)) ? $F{value} : null )
- Second:
Series Expresion: "template = 2"
X Expression: $F{datat ime}
Y Expression : ( $F{template_id}.equals(new Long(2)) ? $F{value} : null )
the thing is, i doesnt show the first line... actually, if i had more template_id entrys (lets say 1,2,3,4,5).... my chart always displays the values of the last template_id (5 in this case)..
can anyone PLEASEEE help?

Hello
(1) Before charting time or duration values, I convert them as decimal numbers representing a decimal number of days (you may choose a decimal number of hours or a decimal number of minutes).
Here is what I get.
It appears that the chart tool defaults to the orientation where there is the greater number of values.
This is the case for Graphique 1 and for Graphique 2
Clicking on the orientation button I may change the behavior accordingly as I did for Graphique 1 rotate and Graphique 2 rotate.
I don't see any oddity here.
Just for info, to build the transposed tables, I didn't used the TRANSPOSE() function but formulas like:
B9 =OFFSET($D$2,COLUMN()-COLUMN($B$9),ROW()-ROW($B$9))
fill down, fill right
G9 =OFFSET($I$2,COLUMN()-COLUMN($G$9),ROW()-ROW($G$9))
fill down, fill right
Yvan KOENIG (from FRANCE mercredi 28 janvier 2009 14:29:02)

Time Series Graph with two Y axes in 11G?

Similar Messages

Maybe you are looking for