Time series objects and order objects on what condtion we need to use

Dear Experts ,
I have question regarding Time series objects and order objects
from my understanding
TIme series objects the data is stored in time buckets without
reference to orders.
Order objects the data is stored as orders. Key figure data is
then saved as orders if semantic 000 is entered in the detail view of the key
figures in the planning area.
my question is when to use the option 1 and when should not use
same for option 2
Many thanks
Regards
Raj

Hi,
This depends on the requirement you have also the application you are using.Like DP key figures are generally time series since in DP you do not need order numbers for example for history sales the requirement is the quantity period wise but not the order numbers.
Again in SNP the distribution and planned quantities are required order wisecoz you need the order numbers you execute the same in ECC system or for Pegging purposes.
Now the safety stock requirement can not be at order series since this is with relevent to some periods.
So overall i can say this depends on the requirement of the kay figure.
Hope this can help.
regards,
kaushik

Similar Messages

What are the differences between PD objects and PA objects?

can any one tell me What are the differences between PD objects and PA objects?

PA is based on Infotypes 0000-0999. PD is based on Infotypes 1000-1999, chief being Objects Infotype 1000. Objects Infotype is the source of different Object Types such as Person, Position, Org Unit etc. You can check that through transaction OOOT.
Regards
Lincoln

What is different between conflict object and lingering object in AD

Hi
I found lots of conflict object in my Forest on AD 2k8R2 with FFL & DFL 2k3 with dsquery filter "(name=*\0ACNF:*).
But Only I can see 4 to 5 AD object in ADUC.
How can I found others.
Also these conflict object are replicated with AD replication? and due to these conflict object, can be any issue in AD replication like slow replication or delay replication?
If I delete them then how can I delete and which command or tool like LDP?
Also Is conflict AD Object and lingering objects means are same?
Please suggest and guide..
See below link of my conflict object ..
http://sdrv.ms/19DUTbi

IT means... If I don't find duplicate or conflict object in ADUC then I no need to worry about it as after AD tombstone lifetime period, these conflict object would be delete automatically ...?
Conflict objects can be duplicate or lingering objects both & you need to worry. Consider an example, if you have a system named abc & you try to join another system with the same name from other site DC where connection b/w other DC's are down &
ABC information is not present in that local DC, it will allow you to join system in the domain with the same name, then the object joined later vl have CNF added.
Another case, two new systems are joined together from two different AD site with the same name, it will allow you to join & once replication occurs, you will find duplicate name with CNF.
Same problem happens, when you connect old DC which has crossed TSL. WHat happens here is you have most recent DC with the deleted objects, when you connect old DC which has not received replication & crossed TSL, again during replication, you will see
objects with CNF which will be lingering objects.
So, CNF objects can be duplicate & lingering objects both & in both the case, i'll worry. Lingering objects are not visible directly, you can find out using repadmin tool. It is really complex to clean them if they exists in the ready only partition
of the GC.
http://technet.microsoft.com/en-us/library/cc738018%28v=ws.10%29.aspx
Awinish Vishwakarma - MVP
My Blog: awinish.wordpress.com
Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights.

Data objects and code objects in oracle application

Hi,
can any one please help me out with following question?
1. what are data objects and code objects in oracle apps and why is that difference?
2. How does the objects gets created in Oracle Applications, like during the installation which part is responsible for creating objects and after the installtion later point of time, how the new objects gets created in oracle applications?
3. what are the ways to find out if my 11i application is OATM enabled ?
Thanks in advance

Hello,
I managed to find answer for question 1, yet to find answer for 2 and 3.
Answer for question 1 --
Data objects : store and access business data (tables, indexes, sequences, index-organized tables, etc);
Code objects : process data objects but them don't contains business data (functions, procedures, packages, views, synonyms);
Now, here i have a question - under which objects queues are considered ?

Difference Between Business Object And Class Object

Hi all,
Can any one tel me the difference between business object and class Object....
Thanks...
..Ashish

Hello Ashish
A business object is a sematic term whereas a class (object) is a technical term.
Business objects are all important objects within R/3 e.g. sales order, customer, invoice, etc.
The business objects are defined in the BOR (transaction SWO1). The have so-called "methods" like
BusinessObject.Create
BusinessObject.GetDetail
BusinessObject.Change
which are implemented (usually) by BAPIs, e.g.:
Business Object = User
User.Create => BAPI_USER_CREATE1
User.GetDetail => BAPI_USER_GET_DETAIL
CONCLUSION: Business Object >< Class (Object)
Regards
Uwe

Main Objects and sub-objects

Hi All,
Please tell me what is the meaning of 'Main Objects' and 'Sub-objects' in CRM.
Thanks.

Dear Nishikant,
Kindly follow the below blog which is exporting your crystal report to HTML4.0 version.
If it successfully imported, then the problem may reside in the mapping of values to the SWF file.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID0191682050DB01264035234114071801End?blog=/pub/wlg/15995
Hope this will help you.
Regards
Gokul.N

Business Objects And ABAP Objects ?

hi all!
May be this is a repitition but still :
Can anyone give me a clarification on Business objects and abap objects in termas of difference-relations b/w them.
regards
sachin

Hi Sachin,
Please refer the below links,
Business Object Repository and Class Library
business objects
Hope this helps.
Regards,
Hema.
Reward points if it is useful.

My home button is not very responsive and I have to click it few times to get it to work. What do I need to do to get it fixed?

My home button is not very responsive and I have to click it few times to get it to work. What do I need to do to get it fixed?

TROUBLESHOOTING iPhone Hardware
http://support.apple.com/kb/TS2802
http://support.apple.com/kb/TS1630
The Home button is slow to respond
If the Home button is slow to respond when exiting one application, try another application.
If the issue exists only in certain applications, try removing and reinstalling those applications. For further assistance in installing and troubleshooting applications see this article
If the issue continues, turn iPhone off and back on.
If the issue continues, reset iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds or until the Apple logo appears.
Restore iPhone. Follow the steps the steps in the iPhone Troubleshooting Assistant.

Hello, may I buy iphone5s in Apple's official website, but the order was cancelled, what time would be able to resume my credit card, I need to use my credit card now, you don't give me back the amount of credit card, I can't use my credit card.

Hello, may I buy iphone5s in Apple's official website, but the order was cancelled, what time would be able to resume my credit card, I need to use my credit card now, you don't give me back the amount of credit card, I can't use my credit card.

You are not addressing Apple here. We are users like you.
Contact Apple: http://www.apple.com/contact/

I get the message "Install Adobe Flash" can't be opened because it was not downloaded from the Mac App Store. This is the first time I have gotten the message. What do I need to do?

I get the message "Install Adobe Flash" can't be opened because it was not downloaded from the Mac App Store. This is the first time I have gotten the message. What do I need to do?

Hi Sandra,
you'll need to edit the security settings to install programs 'Mac App Store and identified developers'
Open the Systems Preference and go to Security & Privacy. There will be a section in the 'General' tab for 'Allow apps downloaded from:" The default selection is 'Mac App Store'. Change this setting to 'Mac App Store and identified developers".
This screenshot is taken on OS X 10.10 (Yosemite), so it may look slightly different if you're on a different OS X version.
Maria

I installed iWork11 but the '09 versions of the software are still running--and the default. What do I need to do to get the '11 versions working?

I installed iWork11 but the '09 versions of the software are still running--and the default. What do I need to do to get the '11 versions working?

It's very simple. If you want to use iPhoto, just let it manage things as it does. Other than that: Export from iPhoto and delete the image from iPhoto. That will remove the master and all versions.
If space is an issue... use an external disk.
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
Regards
TD

I just changed my number on line but my previous number is still showing on my phone and is active. What do I need to do?

I just changed my number on line but my previous number is still showing on my phone and is active. What do I need to do?
Thanks.

Alanf356,
You've reached the right place for help! Once the mobile number is changed, you must activate the new number on your phone. Depending on the model phone you have, you may have to simply reboot your device. If a 3G phone, you may dial *228 (send) and select option number one to activate.
Once completed dial #832 (send) to place a test call and ensure that new number is activated. Let us know if this helps.
EfrainM_VZW
Follow us on Twitter @VZWSupport

What do I need to use iphone and macbook air in europe

What do I need to use iphone 4 and macbook air in europe?

Hello Bev23,
Thank you for posting in the Apple Support Communities. To charge your devices, you will need adapters for the country you are in. We sell a Apple World Travel Adapter Kit that will work with several different countries and will work with both your MacBook Air and iPhone:
Apple World Travel Adapter Kit
http://store.apple.com/us/product/MB974ZM/B/apple-world-travel-adapter-kit
You can also find information about wireless carrier support for using your iPhone in the article below. You may need to contact your wireless carrier for more information about using your iPhone abroad:
iPhone: Wireless carrier support and features
http://support.apple.com/kb/HT1937
Have a safe trip!
Best,
Sheila M.

In what case, we need to use PI for vendor replication in MM-SUS?

Dear Experts,
In what scenarios, we need to use or configure the PI settings for vendor replication between MM and SUS? The SAP configuration guide for SRM 7.01 mentions about the PI settings for vendor replication from ECC to SUS.
However, we are able to replicate the vendor from ECC to SUS using the program BBPGETVD in SUS client?
In what circumstances, we need to configure the PI settings for vendor replication when we are able to do so in a much simpler way?
Thanks in advance,
Ranjan
Ranjan Sutradhar

Hi Ranjan,
In all circumstances you need to replicate vendors from MM to SUS via PI. BBPGETVD is not the right way to replicate vendors to SUS because the information like vendor class, assignment of this vendor class to an object and the vendor classification cannot be transferred via BBPGETVD.
Hence you will have to use PI. You can try sending a PO from MM to SUS and the PO will fail in SUS with a message like 'Vendor not present in SUS' if you use BBPGETVD.
Regards,
Nikhil

What do I need to use sun.jdbc.odbc.jdbcOdbcDriver

hi there
what do I need to use sun.jdbc.odbc.jdbcOdbcDriver to access MS Access database?
String sourceURL = "jdbc:odbc:mysource";
String sqlQuery = "select ComsumerAccountNumber from EDS5";
//getting a connection
try {
Class.forName(driverName);
Connection databaseConnection = DriverManager.getConnection(sourceURL);
Statement statement = databaseConnection.createStatement();
ResultSet rs = statement.executeQuery(sqlQuery);
while(rs.next()){
...some code to do with the results
catch (ClassNotFoundException cnfe) {
System.err.println(cnfe.getMessage());
catch (SQLException sqle) {
System.err.println(sqle.getMessage());}
I got error and caught it in catch( classnotfoundexception). no driver. is this the correct way to use a driver. I have created a data source.

make sure the driverName is "sun.jdbc.odbc.JdbcOdbcDriver"
I noticed you typed in your message "sun.jdbc.odbc.jdbcOdbcDriver" with a lowercase 'j'

Time series objects and order objects on what condtion we need to use

Similar Messages

Maybe you are looking for