Time Setting for Directory Server Gateway

I am using the DSGW software supplied with Netscape Directory Server 4.1. When a client search returns a client displaying the last modified time, the time is from a wrong timezone.
This entry was last modified on Thursday, November 07, 2002 10:17:21 PM EST by PMurphy
This displays EST, my timezone is Australia EST
How can I get it to display correct timezone information

Yeh - I did check time zone on server; when i call date from command line, it gives correct time (including tmiezone), so it looks to me that it is NOT using the timezone as from the system.
any other ideas?

Similar Messages

Compatible tomcat version for Directory server 6.3

Dear All,
Could someone please tell me which version of Tomcat will be the compatible for Directory Server 6.3. And i am new to this directory server environment, here i need to install tomcat too so kindly send me the steps for installing tomcat. Thanks!
Regards,
Karthik

Hi Karthik,
Directory Server 6.3 Control Center has been released many years ago, so it has been certified (so this means that IT IS OFFICIALLY SUPPORTED) on the most common application servers at that time, so Tomcat 5.5 and Sun App Server 8.2.
Personally I've run the DSCC also on the latest releases of Tomcat (6.0.35 at the time of writing) and Glassfish (2.1.1 series) for test deployments absolutely fine; but in case of issues, if you want your solution to be 'officially supported' by Oracle, you've got to reproduce the problem on the supported app servers in the compatibility matrix.
HTH,
marco
P.S.: also Directory Server 6.3 is getting older and older... at least try to get the latest patch: 6.3.1.1.1
http://docs.oracle.com/cd/E19261-01/E26994/html/index.html
The latest release is now 11.1.1.5.0 if you don't have any architectural/sw compatibility constraint, try to move/migrate to a more recent release

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes?

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes? The Ipod Touch, by itself does not allow cross-fading, therefore when the stop time is edited short, the song jusst truncates then goes to the next song. I tried the DJay ap and while it would crossfade, it would NOT read the song settings for the stop marker. So now I want to try and Ipad and see if there is an app that will READ the Itune stop settings within the song. I do NOT want an app that will allow me to DO the stop marker. I want an app that will READ the stop marker from the song as it is set in Itunes.

Itunes provides the option for setting the Start and Stop times of each music track. However, the start and stop times do not synchronize to the iPhone. I don't understand why this option is even available as it doesn't work when listening to music on the phone. I have not found another application that will support the start and stop time markets. I have searched quite a bit for this but can't find anything. I hope we can find something.

End of support dates for Directory Server

does anyone know where I can find an end of support matrix for Directory Server ? We are still running 5.1sp4.....Thanks

Is this information publicly available? I am interested in this as well...
Thanks

Can I use Time Capsule for a server ?

hi,
i was wondering if I can use Time Capsule for a server.
Let's say I have an ubuntu server, and I'm running some websites and web applications on it.
I would install these appications on ubuntu but then store the "file folders" of each website or application (with images, videos, etc.. ) on Airport capsule and leave only the application files on the server.
Is this feasable ?
Thanks
Patrick

Welcome to the discussions!
+Is this feasible ?+
Feasible, yes. Practical, no...unless you are willing to put up with very slow access to files that are on the Time Capsule.
Keep in mind that the Time Capsule was designed primarily for Time Machine backups, not as a media server for quick access to data. You might want to explore other options that would allow much faster access to files when you need them.

Setting for J2EE server do not exist

Hi,
I have prepared a web service from a FM.
I can't test it from the WSADMIN since this system is not integrated to a J2EE server. So I get the error message "Setting for J2EE server do not exist"
I am able to generate the WSDL file from Tcode WSADMIN
How can I test this web service from a browser with a J2EE server? If browser not possible then how can I test this web service.
Thank you,
Sam

Hi Sam,
I am not sure if you can test the web services without a J2EE server. For
testing in wsadmin, you do not need the system to be integrated with a J2EE server. Only the details of any J2EE server in the landscape can be given in
wsadmin -> Goto -> Administration Settings .
Regards
Srikishan

Hello! please change the time setting for Russia in the hour ahead. Unas in the country while now and there is one year, or winter.

Hello! please change the time setting for Russia in the hour ahead. Unas in the country while now and there is one year, or winter.

It is November 9, and the problem still persists. The Time in Russia is reported by OS X as one hour behind... Apple, Please fix this problem.

Last Logon Time in Iplanet Directory Server 4.1

Hi,
It would be great help if any one of you could let me know the attribute in Iplanet Directory Server 4.1 to get the Last Logon Time of a particular account.
The Directory Server is on solaris.
Thanks

Hari,
You can try to find it from the logfiles.
I actually designed a plugin for this type of thing, but it's not yet implemented. It would simply write a timestamp to a user's entry after every successful bind, among other things which I won't go into detail about now...
Oletko suomessa?
podzap

Recommended OPEN CURSORS setting for Oracle serving a web app

G'day
Hopefully Phil is still lurking here, so might see this. Or anyone else that knows about Oracle.
I've always thought the default for "maximum pooled statements" setting for an Oracle DSN - which is 300 - is way too low to be sensible for a web app (which, let's face it, any CF DSN is going to be used for!). I usually find I end up with it up around 1000-2000, depending on the sizeof the app, and how busy it is.
I'm adequate with monkeying around with Oracle, and have needed to do a moderate bit of that sort of thing in our dev environment, but I am by no means a DBA, so it's all very seat-of-the-pants.
So I'm keen to know what other people have their maximum pooled statements / open cursors setting set to for their Oracle-driven web sites/apps.
One of the reasons I'm asking is that I wonder if it might be worth while to suggest the default for CF9 is upped to 1000 or so..?
Thoughts / comment?
Adam

I personally would not set the limit any higher than 300, and I'd consider keeping it even lower.
Each pooled query / open connection is imposing resource-burdens on both the CF and the Oracle servers by creating what might be thought of as "a very crowded restaurant." Most of them are just standing around, but they nevertheless are occupying the restaurant, and the potential exists that every one of them might try to order a burger-and-fries at exactly the same time.
The "number of pooled statements" should be such that your SQL-server can actually handle that number of simultaneous requests, both in terms of active searches and of maintaining the still-open result sets. Beyond that point, incoming web requests should be forced to wait. Set an "occupancy limit" to your proverbial restaurant such that everyone could come in and be timely served at the same time.
Categorically, if you plot out response-time graphs about such things (SQL servers, virtual memory subsystems, and so on), they exhibit a fairly-linear performance curve up to a point, after which "the elbow- or knee-point is reached" and beyond that point it becomes exponential in a very, very bad way. I saw this happen in a batch-processing subsystem long ago on a very small mainframe: (yeah, I'm makin' these numbers up...)
Number of Jobs at Once
Completion Time per Job
1
30 seconds
3
40 seconds
8
9 minutes
12
4.5 hours
It was just-about that bad. And what I did to (dramatically...) address the problem was to impose simultaneous-job limits on that subsystem. As long as the number of simultaneous jobs was constrained to "less than 3 at a time," a workload of 12 jobs could be reliably completed in (4 * 40) seconds, whereas if all 12 jobs tried to run at once, the computer would have reason to file a lawsuit for abuse.

Minimum Solaris installation for Directory Server

Hello,
i want to set up a new Solaris installation for Sun ONE directory server.
But i don't want to install always the "entire distribution" and then turn off all services. I want to keep the solaris os installation as small as possible. Has anybody tried this before and can report some experiences? Is the "reduced network" cluster the right way to go or better the "core" cluster? Does anybody have a list of the packages which must be installed after a minimal solaris installation for the ds to work?
Thanks a lot,
af_inet

Since you original question is "minimum requirement
at the SERVER", I would say that X is not really
needed at the server end if you use installer text
mode CLI (command is "./installer -nodisplay")
instead of installer graphical mode (GUI). However,
to fix uninstall/reinstall issue, X is needed as the
"prodreg" which is used to uninstall packages is a X
program, without text mode option.This is correct.
It is not a must to run ./startconsole (X program)
LOCALLY so as to perform DS admin functions as you
could always run SUN ONE Console REMOTELY from any
remote host (Windows or UNIX/Linux) with just the
console binaries installed. (for large data centre
env. the LDAP server is usually locked in server room
away from your desk and you tend to use remote admin
console).This is correct too. I think it's a matter of taste if i want to install console on the DS itself or on a separate host. As long as i have only one DS i will leave it on the machine itself. But you are right, this is not a must. So i should have asked my question more precicely :-)
Thank you very much,
Chris

H/w requirements for DIrectory server for 200,000 users

Hi,
I would like to implement Directory services for 200,000 users. How can I know whether iPlanet Directory 5.1 will support this many users or not? If supports, Which h/w I have to use?
If any one can let me know the formula to calculate users and h/w
Thanks

The directory server can handle many more users than 200K. The hardware requirements calculations are amply explained in the book "Solaris and LDAP Naming Services" by Bialaski. If you have iPlanet support contract they can provide you tuning information which includes this info.
You should remember the possibility of growth and load in terms of number of clients and peak requests per second. With your needs, my gut feeling is that even a Netra can host it. However, if it's an enterprise service you may want to go with at least 220 machines in a replicated configuration for load balancing and availability.
DISCLAIMER: Use these opinions at your own risk. You must do your own analysis and calculations to design a suitable physical/logical architecture.

Is there a way to automatically change tabs with different times set for each tab?

I found a few add-ons that will automatically change tabs based on a configurable time. But all the tabs use the same time setting. What I need is the ability to have tabs displayed for different amounts of time. Ex, Tab 1 for 30 seconds, Tab 2 for 10 seconds, Tab 3 and 4 for 5 seconds. Ideally, I will have the ability to modify these settings as the amount of tabs and the content will change a couple times a week.
Currently I'm using Tab Slideshow with each tab displayed for 15 seconds. But it sounds like Tab Rotate and Auto Toggle Tabs essentially do the same. If there is already a solution that would be great but if not is there someone available for hire to help modify one of the existing add-ons? Thank you in advance for your time.
John

Currently Firefox don't have any options like that.
You can ask the Addon developers
*http://addons.mozilla.org/

URL to be used in high availability for Directory Server

Hi All,
I have an environment configured for high availability. I have two OVD and OID servers each in this environment, configured in high availability. What should be the value in the Server URL field of the Directory Server IT Resource in the OIM for this environment? In the normal environment, I had it as "ldap://ovdhost01:6501" and it was working fine. But since there are two servers here, I am not sure what URL to use in place of this. The entry for the two ovd hosts in the OHS is "idstore.com" which is configured on 6501 port. But I tried using the following URLs and none of them worked:
1. idstore.com
2. ldap://idstore.com
3. ldap://idstore.com:6501
4. ldap://ovdhost01:6501,ldap://ovdhost01:6501
Can someone help me know the correct URL to be used in this case?
Thanks,
$id

Not sure about OVD or OID but for SOA and OIM:
SOA:
XMLConfig -> XMLConfig.SOAConfig -> SOAConfig
Rmiurl -> t3://soahost1:soaport1,soahost2:soaport2
Soapurl -> Load balancer or web server url (without the /workflow context)
OIM:
XMLConfig -> XMLConfig.DiscoveryConfig -> Discovery
OimFrontEndUrl -> Load balance or web server url (without the /oim context)
And ofcourse on your LB or WebServer, you need to configure these:
SOA: http://docs.oracle.com/cd/E23943_01/core.1111/e10106/ha_soa.htm#CHDDJEGD
OIM: http://docs.oracle.com/cd/E21764_01/core.1111/e10106/imha.htm#BGBDFEIE
-Bikash

WebUtil and Jacob Setting for AIX Server

Dear All
I am using forms 10G.
I have done the setting for webUtil and Jacob in my pc for browse button to be and it is working fine .
But can any one please tell me the steps for implement these things in AIX server .I mean how to configure this to utility Webutil and Jacob in AIX server .
Kindly anyone tell me what needs to be done in server for webutil ?
Edited by: LuKKa on Sep 22, 2010 12:01 PM

the steps are same as in other supported systems.
Since my blog is failed to help you then i will recommend you to do some more reading ...
Read the docs http://www.oracle.com/technetwork/developer-tools/forms/webutil-090641.html

Can't start NT service for Directory Server using other acc. than LocalSys.

Hi!
I'm using Directory Server 5.1 on a Windows 2000 machine.
I wrote a Plug-In for DS that needs Administrator Access to the NT Domain. So I tried to run the DS-Service as Administrator but the service can not start. I just keeps in status "starting...".
I don't get any error message and the errorlog doesn't contain anything.
Has anyone an idea?
Thanks!
Florian

I forgot to tell one thing: I use SSL, without SSL I do not have this problem. Perhaps it's only the popup I get when starting DS, where I have to enter the certificate password?

Time Setting for Directory Server Gateway

Similar Messages

Maybe you are looking for