Time Settings in Factory Calender
Dear All,
Where to set the working hours for a factory calender? Tr code SCAL shows only the year , month and day. Where to set the time ?
Thanks in advance.
Regards,
Niketan
Hi !
In specified transaction you can set the starting and finish times for your shifts.
Once inside the transaction of 'Maintain working hours', click on 'Shift definitions'.
In the first column give some identificatin for the shift, in next column give some text for the shift. In the third & fourth column give some start and end date for the shift(for ex. 01.01.2007 & 31.12.2007.
Then in the fifth & sixth column you can give start and end times for the shift. You the option of following a 12Hrs or a 24hrs format in this.
This <b>will</b> serve your purpose.
Reward if helpful.
Regards,
PATHIK
Similar Messages
-
Restoring Time Capsule to Factory Settings
My time machine is no longer backing up my hard-drive, and I think I may have to reset the Time Capsule. I have stored lots of home movies on that disk. Will restoring the Time Capsule to factory settings erase the disk?
Thanks, Pondini. I've been through the manuals and the boards and FAQs but can't figure this one. My last backup was in December. Now when I try to back-up, Time Machine starts cycling through (i.e Making Backup Disc Available), but then it just stops: "The Machine could not complete the backup. The backup disc is not available." That's the error message.
When I go into Time Machine on my Systems Preferences and click Select Disk, I get None. If I then go to Set Up Time Capsule, Airport Utility does find my Time Capsule.
I click through where it asks whether I want to change some settings for this Time Capsule. I click all the way through, changing nothing. And of course, I haven't resolved the problem. I don't want to go back to factory settings because I have archived a lot of old home movies on the Time Capsule and am afraid I'll lose them.
The only changes I've made recently that may affect this have to do with a mobileme account. I've been using one mobileme account for work for several years. Three weeks before I started having problems with the Time Capsule, I started a MobileMe account for the family. Now, when I sync all of our machines, the system looks for a new local host, which I have created. About the time I started syncing my computers is about the time the Time Machine stopped backing up.
Can switching between the two local hosts be the source of my problem? -
Factory Calender and Time Stream
Hi,
I Maintain a factory calender A
where monday to friday is working
and holiday on 1/1/2009
My Distribution centre is working 1/1/2009
How do i set up in APO?
thxMaintain Production calendar (For Factory) and Distribution calendar (For DC) using transaction
S_AP9_75000138 - Maintain Planning Calendar (Time Stream)
In calculation rule maintain 5 days as working day using calculation rule "Weekdays"
then go to bucket delete day 1/1/2009 if showing as working day in Production calendar and keep this day as working for Dist calendar.
Then go to Location master in Calendar tab
assign Production calendar for factory location and distribution calendar (in shipping and recving) for DC. -
Lead time from catalog does not consider factory calender
Hi,
we are working with SRM 2.0 classic scenario. I have following problem:
We take over lead time from a supplier catalog via OCI in EBP. This works but the lead time does not consider holidays and weekends. How can I activate the Factory Calender?
Thanks ThomasHello,
I just sniff arround and found out that EBP 3.0 does not support factory calendar.
You should use BBP_DOC_CHECK_BADI or BADI BBP_CATALOG_TRANSFER and call within this BADI the function modules requesting the factory calendar data via RFC on the backend.
i.e.
get the target system of the follow-on document
SELECT log_sys from BBP_DET_LOGSYS INTO wa_logsys-log_sys
WHERE CATEGORY = ls_item-category.
ENDSELECT.
read table T001WK
CALL FUNCTION 'META_READ_TABLE'
EXPORTING
query_table = 'T001W'
logical_system = wa_logsys-log_sys
TABLES
options = options
fields = fields
data = tabcont
EXCEPTIONS
OTHERS = 1.
fill the internal table xt001w
LOOP AT tabcont INTO la_tabcont.
MOVE la_tabcont-content+3(4) TO la_xt001w-werks.
MOVE la_tabcont-content+61(2) TO la_xt001w-fabkl.
APPEND la_xt001w TO xt001w.
ENDLOOP.
SORT xt001w BY werks.
get the fabric calendar related to the plant
READ TABLE xt001w INTO ma_XT001W
with KEY werks = ls_item-BE_PLANT.
check if delivery date is a working day
CALL FUNCTION 'DATE_CONVERT_TO_FACTORYDATE'
DESTINATION wa_logsys-log_sys
EXPORTING
DATE = ls_item-DELIV_DATE
FACTORY_CALENDAR_ID = ma_XT001W-fabkl
IMPORTING
WORKINGDAY_INDICATOR = W_IND.
get an error message if delivery date is not a working date
IF W_IND = '+'.
CLEAR ls_message.
ls_message-msgty = 'E'.
ls_message-msgid = 'ZBBP'.
ls_message-msgno = 'xxx'.
ls_message-msgv1 = 'error message text, e.g. delivery date not
working date'.
ls_message-item_guid = ls_item-guid. "assign message to item
APPEND ls_message TO et_messages.
ENDIF.
endloop. -
Error at the time change factory calender (scal) validity period
Dear Experts
When I tried to change the factory calender Valid period with t code scal Fr. Year 1996 to Year 2011, it probe me the message "Please enter validity area between years 1995 - 2010." and I wasn't allow to save.
Pls advise how to solve the above problem.
Thanks.
BK GAIKWADhi
your issue is clear that the factory or plant cllendar is defined for only 5 years 2005 to 2010
NOTE: pleaase contact your HR or FICO consultants for this issue & dont change any thing in PRD then you will be responsible for it
hope this clears your issue.
balajia -
Factory calender special rules
Hi MM consultants,
We have one issue related to Factory calender.
We updated the special rules in factory caleder stating that palnt is clsoed for some time in christmas.
Now the issue is after creating schedulign agreement delivery schedule release were sent to vendor mentioning that delivery is required during holidays and caused confusion.
My question is which table i can see the special rule created to the factory calneder so that i can confirm the releases were created before the calender updation.
please reply
Thanks in advance
YashwanthHi Yashwanth,
You can check the factory calendar and the special rules on SPRO > SAP NetWeaver > General Settings > Maintain Calendar.
There, select "Factory Calendar" and click on "display" button.
In the next screen, select your country and click on the "Calendar" button that is in the top of the screen.
In the next screen, make double click on the year 2012.
There you will see the Public Holidays of the Factory Calendar.
Now, yo check the special rules, go back to the screen that is showing the countries and make double click on the country selected.
In the next screen, click on the "Special rules" button and you will see the special rules for the country selected.
But, for the case of MM, the system is only sending a warning message when you are selecting a Public Holiday or Special Day in the delivery date. The message is as follow:
Delivery date: next workday is 10.04.2012
Message no. ME080
Diagnosis
The system has determined the next workday from the factory calendar that is assigned to the specified plant.
If you don't want that the Public holidays or Special days can be selected, you need to change this message as error message.
You can do this on SPRO > Materials Management > Purchasing > Environment Data > Define Attributes of System Messages > System messages.
I hope this help.
Kind regards,
Sandra -
iPad constantly glitching/freezing/crashing/parts of screen unresponsive - time for a factory reset OR a trip to the Apple store???
My son has nothing but problems with his iPad Mini. It is less than a year old and it constantly freezes/crashes/glitches and parts of the screen are unresponsive. This happens while playing games, watching movies, surfing the net etc etc
The iPad has been in a heavy duty Survivor case from day 1 and has been very well taken care of - so I don't think it's a damage issue
I have tried numerous resets (just holding the 2 buttons) and have disabled every feature on the iPad that might be causing memory/RAM issues (?) all to no avail.
I haven't tried resetting to factory settings as I don't want to lose all the data on the iPad (mostly his game achievements and Minecraft maps that he has worked so hard on!!!)
SO - any suggestions:
1) Take it in to the Apple Store - I have never gone to Apple over an issue, is this possibly covered by warranty???
2) Factory Reset - If I do this can I save all his game achievements/data???
Cheers,
ToddTry this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPhone, iPad, iPod Touch: Troubleshooting Touchscreen Response
http://support.apple.com/kb/ts1827
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Not normal. Take it to an Apple Store for evaluation. You're covered by Apple's 1-year warranty.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
Invalid Factory Calender error
Hello gurus,
While making a subcontracting PO, the following error is coming "Invalid factory error or error in the factory calender"
I have checked the plant settings & have put Factory calender IN for the plant. Still the error is coming. How to resolve this?
Regards
Prashant>
prashantjalgi wrote:
> The validity is from 1996 to 2010.
>
> If I try to extend it to 2011, the system is not allowing.
>
> The same error is coming when the validity is 1996 to 2010.
Why is it not allowing? what error do you get when trying?
Calendar maintenance is done thru CUNI, and cusotmizing is usually done in development clients. -
Schedule a process chain using factory calender
Hi All,
My requirement: the user wishes to see the report every month, 1 working day prior to the month end.
I am trying to do this usnig processing chain and factory calender to restrict it.
1. How can a factory calender be used ?
3. how do i give the offset of 1 working day prior to month end?
2. If you have any such experience please share.
Please help.
Rohit Kumar.Hi,
In the start process open the start time parameters screen. Then click on the button '>>' next to 'at operation mode' button. In the following screen, give the factory calender. In the workday column give 2. Choose radio button 'end of month'. In the period field give the frequency of the loads, i guess it should be 1 for you as you want to load monthly. So the job runs on the day before the last working day.
regards,
Murali.
Edited by: Murali Krishna K on Jun 23, 2008 5:27 PM -
How to Transport Factory Calender to QTY and PRS systems
Hi All,
I had done a small change to Holiday calender in SCAL. I have read that it's not suggestive to transport it. Can any one let me know the procedure to transport the change to QTY and PRD systems.
The transport button is greyed out .
Best Regards,
SriThe following OSS Notes have also been checked.
356483 : Customizing: Current settings in the test system.
077430 : Customizing: Current settings .
328916 : Cust Changes despite "System cannot be changed" setting
Can any one provide an input on the procedure to move a factory calender - Individual entry..
Thanks in advance
Sri -
Consideration of network activity factory calender
Hi,
I am facing problem regarding considering of factory calendar.
scenario: we are assigning the personnel nos in person assignment tab in internal activity. confirmation of activities will be done through CATS. at the time of confirmation it is considering the calender given in work scheduling in HR master data rather considering the factory calendar of network activity.
i require how to select the factory calendar of network activity rather selecting the calendar from work scheduling of HR data.
With Regards
Prasanth.NHi Prashant,
This is solution for PS without HR integration..............Please do the following steps:
1. Create a person responsible using OPS6
2. Assign a desired factory calender in the particular activity at internal tab of the activity.
3. Then Plan your work and save and release.
4. Then do the confirmation in CATS
Hope it will be clear now. Appreciate if it is useful
Thanks and Regards
Vetrivelan -
Doubt regarding : factory calender - reg
During maintenance off we need to change the factory calender to holidays for production shut down purpose .
At the same time warehouse will work through which billing and other things happen.
if i set the days as holidays in factory calender ware hose is not able to bill during these days .
if i am setting as working days production planning is getting effected.
we can not use two different calenders as we can assign only one calender to a plant
what shall we do?
waiting for positive reply
regards
madhu.During maintenance off we need to change the factory calender to holidays for production shut down purpose .
At the same time warehouse will work through which billing and other things happen.
if i set the days as holidays in factory calender ware hose is not able to bill during these days .
if i am setting as working days production planning is getting effected.
we can not use two different calenders as we can assign only one calender to a plant
what shall we do?
waiting for positive reply
regards
madhu. -
Ipad 1 takes days and still unable to reset all data and settings to factory default
ipad 1 takes days and still unable to reset all data and settings to factory default
Something is not right, it should not take more than 15 minutes.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Customizinbg Adaptor Object to download the Factory Calender
Hi there,
can anybody help me with the download of the Factory Calender from oure R/3 to CRM 2005?
I'm searching for a Customizing Adaptor Object. Is that correct, or is there another way to synchronize the booth calendars?
The problem is, that in TR SMW01 I have an error in one bdoc which tells me that I have a problem with the fabric calendar.
Thanks a lot for your help
Greets christianDear Christian,
There is no download object to move the factory calendars from R/3 to
CRM. To have the correct description appear for your custom factory
calendar on CRM, you would have to manually recreate the entries in
table TFACD on the CRM system. The CRM IMG path is General Settings
-> Maintain Calendar.
Or you may transport acalendar data within a system landscape,
aplease check note 538344 and related notes.
Regards, Gerhard -
Difference between Holiday Calender and Factory Calender
What is the difference between Holiday Calender and Factory Calender.
Holiday Calendars is used in Time and Payroll. It is Holiday Calender which is used in defining Work Schedules Rules for different regions.
In simple, we can say... it is defined for Employees.
Factory Calendar in turn in used in Shift Planning concept, T&E Mng, in defining/planning for Units.
In simple, we can say... it is defined at Unit(Area) Level.
Eg: Employee can be on holiday based on holiday calendar assigned to his area. But Factory may be running/open on the same day.
Regards
...Sadhu
Maybe you are looking for
-
About a month ago my wifi switch greyed out. I went through all the trouble shooting and ended up going to the Genius Bar and got a new iPhone 4S. Now the switch greyed out on the new one.. help! I've had my new one for less than 3 weeks. What gives?
-
Crashed 160GB Classic Will No Longer Hold More than 32GB of Data
So, a few months ago, my 160GB iPod Classic (which is 3 years old last Christmas), crashed on me. I was in the process of uploading some songs to it when it froze; I attempted to eject it, got no response and simply unplugged it. Upon plugging the iP
-
How can I access Apple TV from a second television?
We have two televisions and would like to have Apple TV on both.
-
how do i find the password to my "local keychain"...its not the same as the administrator password
-
CREATIVE ZEN MICROPHOTO..d
What the heck. Ive seen this problem everywhere but I protest to bang my zen to make it work. It won't load. It gets stuck at the CREATIVE screen. I downloaded the new firmware, but i can;t get my computer to recognize my computer because the **bleep