Time shift video issue

The video taken in time shift video is too dark and is barely visible even on standby mode while not recording, even the exposure control doesn't seem to work its still the same from -2 to +2. Any advice?

Hi aamir_kh,
Welcome to the community.
Just to make sure you understood the above instructions, I have supplied them below in simple format.
Menu > Settings > Apps > All > Timeshift > Clear Data
Now try using the app.
let us know how you get on.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

It is a hard one.. laptops with small drives are a pain.
What you need is a home media server.
Some people use a PC running itunes for cost.. but that is nothing like as good as using a Mac mini.. they make great little HTPC device.. you can plug in large hard disks and store all your files and media. And share it with the network.. Read up apple's instructions on home sharing.
https://www.apple.com/au/support/homesharing/
For cost you can buy a mini from 2011 or 2012.. I would not recommend earlier ones.. the advantage of 2012 is they have USB3 ports. But you will pay more for them.. new mini is not as useful.. they have soldered in memory and you cannot upgrade.. the old mini was the most easily modified mac in the whole range. Uses little power and can be bought for a $300US for a good one second hand.. maybe less.

Audio and Video issue with Windows 8.1 upgrade on Ideapad n585

I upgraded my Ideapad N585 to Windows 8.1 the other day, took forever, but it made it through. Unfortunately, I now get boot erors for the Dolby software, and the AMD Vision/Catalysyt Control Center. Neither of these programs are able to start, from startup or even manually. They just won't run. Sound seems to come out fine still, but I do have video issues.
First off, my computer doesn't seem to recognize a HDtv as a monitor through the HDMI port. I still get an image, but it's set to current screen resolution instead of 1080i. I tried using the detect button to force it to look for a second monitor (my TV), but it showed nothing connected, though at the time I was using two screens. Now my monitor's screen resolution seems to be a little higher than my TV's, but it doesn't fit the screen properly, and will sometimes put a black border around the desktop, not using the full screen. I have also noticed, that when plugged into the tv, if a background program like a screen saver starts (and I am one of the few people who still use them, I like BOINC, sue me), it will reset the screen resolution to what it requires. When the program exits, the screen resolution stays, and that becomes the new max screen resolution until I restart the computer. So far, it only does this through the tv, if I run the laptop monitor alone, it doesn't happen.
I did try updating the software with what's available through the support site, but nothing happened. I even went as far as to use the Windows 9x~XP standbys of completely uninstalling, manually removing everything from the system registry I could find relating to these two programs, and then finally reinstalling the software. Giving the audio and video a complete clean slate to work from, and got no positive results. I restart the computer, Dolby and Catalyst won't boot, and blind to HDtv. Problems as described above still apply.
Anybody else have this issue? Anybody got a fix?

have you found a solution to this?
My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
*edit*
this worked for me i stumbled across this
I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked.

Video issues in mac os 10.6.4 and windows 7 64x

To start with, my computer is the late 2008 model Imac, has 3g of memory, and wasn't experiencing any video problems until earlier this month. I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
I'm thinking, Ok, perhaps this is a bad install of windows, since it happened in a windows program (everquest 2, an online game), and rebooted into Mac. Almost immediately, I saw video problems (snow, pixels, lines, distortion)on the mac side, which had occurred with the windows side.
My husband is angry, I'm angry, so I decide that I'm going to trash everything and start off completely fresh. I intended to reinstall mac 10.6.4 after erasing everything, so I removed the windows partition, and attempted to reinstall snow leapard, without using the original leapard disc that came with the system. I didn't realize until too late that I had forgotten to erase the original os, but I figured I'd see if there were any problems and go from there. I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side. I was able to fully update the mac side before attempting any installation of the windows os.
I started having video problems really quickly in the windows side after the full installation and update, but the system disabled the initial nvidia drivers and went to plug and play drivers. The only thing that displayed any further problems was the ISight camera, but that was to be expected without the apple updates.
I did read the bootcamp manual afterwards, and saw that my IMac, being an earlier version, might not properly install bootcamp drivers for windows 7 64x, although we had successfully located and manually installed the drivers earlier when first installing windows 7 64x. Keep in mind, I'd had the os installed for several months without any video problems, and in fact, it worked like a dream in both os after the computer had a previous repair of the hard drive, sound card, and logic board.
Anyway, to continue, after the video symptoms occurred on windows, I switched back over to mac to look for and install a video firmware download that I had located through these same forums. I had to change os because it was a dmg, so I did so. Now, I still had the snow leapard install disc in the computer, so that's the first thing I saw on the screen when booting into mac. I immediately started also seeing the pixels and some distortion, but it stopped briefly. I tried bringing up Firefox to get to the download, but the computer froze (showed the little round ball)and wouldn't respond further. I tried several reboots, and could usually at least get into snow leapard, but the computer froze each time.
Finally, after several attempts, the computer won't boot into either os, and won't go into the install disc either. I'm completely at a loss, because I'm told this IS NOT a hardware issue, and the problem was resolved with simply resetting everything. The problem was NOT resolved with that reset, because I'm able to reproduce this issue consistently with multiple reboots, and have even recorded it with a camera I have. I'm at my wit's end, because I'm on a fixed income, and this costs me time and money I just don't have. It's caused me to get behind on one of my bills, because I have to have a computer, and further repairs, while covered under warranty, are going to cost me further money to get to and from the service center. Not to mention the fact that it's going to take another month for me to wait for my money to become available so that I can pay for the ride back and forth for the repair.
Anyone, anyone at all, have any suggestions that may help? I have access to another computer, and can try using that computer to help me boot the other computer up, if I know how. Please, this is so frustrating to me, so I'm hoping someone can suggest something that may help.
I know I mentioned in the post what type of video issues I'm experiencing, but I figured I'd reiterate to make it easy. The computer will display a distorted image on bootup, like a pixelated off-center image. You know, kinda like 2 punch cards held up to each other, with the same holes, but off center. You also get snow, when able to boot up, with the screen sometimes showing half the screen, flickering. Like the screen is broken, but it's not even scratched. And it's not all the time either, if it was, I would think maybe an internal screen was broken or cracked (I've worked tech support for devices with internal screens, so I understand you can have a perfectly good outer screen, but a cracked inner screen). Right now, on bootup, I get that punch card effect, then the screen goes blank. I should mention that sometimes the system will show that, but then boot into windows with no immediate distortion, but will show distortion in the mac side if I'm able to boot into snow leapard. Hope this information helps someone give me an answer that helps.

To start with, my computer is the late 2008 model Imac, has 3g of memory …
I'm assuming you mean the Early 2008 iMac since there is no "late 2008" one. AFAIK, it came with 2 GB of RAM standard & the common BTO option would have been 4 GB, so can we assume that you have installed an aftermarket memory module to get to 3 GB?
I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
What repair and setup? Is this something you did after getting the iMac back from service? If so, what exactly did you do?
I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side.
Do you mean the Windows drivers or something else? Did you follow the Bootcamp install procedure exactly when reinstalling Windows or not?
I switched back over to mac to look for and install a video firmware download that I had located through these same forums.
What video firmware download do you mean? AKAIK, there are none for early 2008 iMacs.
No offense intended, but it is hard to understand exactly what you have done because while you mention much, you don't say a lot about the specifics for a lot of that. In general, it is best to concentrate on those things & keep the commentary to a minimum.

Best battery time for video

Some users in far-east asia are reporting that 60GB model battery time is 6 ~ 7 hrs for continuous video play back, and 30GB model is showing 3.5 ~ 4 hrs video play time.
(Yep, music play time is not an issue at all because it's 10 times of video play time, as you guess.)
However, according to the posts, encoded video files should be very well optimized to iPod video performance, which means that, I guess, some specific video encoding settings are very critical for the battery time.
Well I wish I can figure out what's the best settings.
My 30GB model showed 2 hrs video play time for .mp4, 368x192, 30fps, 768kbps, 44kHz, 128kbps movie.
If anybody can post your experience, it would be helpful.
Thanks,

Other people said that H.264 is the most optimized vifeo format for 5G iPOD. So H.264 format consumes less power than mp4 format. Is that correct?
Any comments are welcome.

Time Lapse video

I wanted to make a time lapse video and I recorded 19 hours of video but now find I import it into adobe premiere pro but cannot edit it. Is there a way around this as I want to compress the 19 hours down to 10 minutes?

Premiere Pro is too simple to make a mistake in. well you can if do not know what you are doing. But obviously I would think that I do. not so long ago I found out that the biggest file that you can edit on premiere pro on windows is 3.? gigs which relates to how much memory windows can address.
I was wondering if there was a simimlar issue here with my macbook pro or was it a design issue with premiere?
1 I open premiere pro
2. I create a new project
3 bring in my footage
4 create a new sequence
but still cannot drag and drop my footage onto the time line. this has happened on two occasions
I still after creating a new project, canceling on creating a sequence until I import my movie and then drag it to the new button to create sequence, I am unable to then drag it to the time line

AIR for Android App - Video Issue

Hi all,
I've developed a Air for Android application targeted specifically for Samsung N 800.
There is a section in the application that has a list of Thumbnails and the user can click on any thumbnail and Play appropriate video.
When playing the video, there is a Close button and Next / Back buttons available on the screen to handle respective actions.
The issue with the app is that, when the Video is playing, if I hit the Home button available on the Tablet, the app minimises. Now if I maximize the app from the System Tray or reopen the App from the Menu, the video continues to play, but this time the Video overlaps the Close and Next / Back, so the user is not able to close the video what so ever.
The same issue occurs when I access any of the buttons available on the Tablets system bar on the bottom of the screen.
Any help will be much appreciated

I'm not sure if I completely understand you, but if I do, you want to check the Exif info to see how the image is oriented, then rotate it to show it how you want on the screen. Take a look at this post here: http://forums.adobe.com/thread/875157 it may help with doing what you need. It's a little tricky and works differently for iOS and Android, but not too hard to figure out. Also, in the future, you may have more luck getting some decent answers by posting in this forum: http://forums.adobe.com/community/air/development/mobile?view=discussions

Time shifting and record live stream

Hellow everyone,
I would like to stream videos for my viewers and them have a abiliti to timeshifting live stream.
Can I use live application for timeshifting? Or I should use livepkgr to do that.
For archive and play on the VOD mode I like to stream live and record at same time. in the livepkgr I see in the stream folder create a stream file with the f4f extention automaticaly whoever in the live application I should call application.record on the FMS to save live stream on the server.
Please advise me the better solution to archive and time shifting.
Many Thanks.

livepkgr application for for HTTP streaming...
f youjust want to stream over rtmp use live application and code to record the stream...recording is pretty simple in AMS just call Stream.get() s.record(...) s.play() where s is the stream which you are recording...
application.onPublish = function(clientObj, streamObj) { trace("recording started..."); var strName = "recorded_" + streamObj.name; var s = Stream.get(strName); if (s == undefined ) return; s.onStatus = function(info) { trace(info.code); } if (!s.record("record")) { s.trace("record failed."); } s.play(streamObj.name, -1, -1, true); }

KT4VL video issue

New motherboard/chip/memory/HDD in previous case with previous video card. No other cards installed.
I get to the WinXP setup screen fine, and choose to format the HDD in NTFS, but then the screen flashes and I get "synch out of range" on the monitor. I tried XPhome as well as pro out of curiosity...I get the same "synch out of range" at various times.
KT4VL
Corsair 512MB PC400
Athlon 2.1Ghz
MSI-8855 GeForce2 ti-Pro (4x AGP)
CD burner, CD reader and 80GB HDD installed
PSU is 300 or 350 I believe
no other cards or devices yet
I made sure to keep all BIOS settings at safe/default levels while doing initial install. Cannot get past the video issue, and I have never seen it before. Any ideas?

Sorry...its a Samsung 19" Synchmaster...about 6 months old.
It was fine with the old system, as was the video card itself. I carried them both over from my previous "guts"...an MSI KT2proRaid I think, with Athlon 800.
Initial video signal is fine, and as far as I know it shouldn't switch from basic VGA to hi-resolution until it actually gets into XP. It's nowehere CLOSE to that point when it is in the blue XP setup screens which makes it puzzling.

Premiere Pro CS3: Rendered video issues.

My friend gave me her old copy of CS3, and I've been using it for quite some time now.
About 5 months or so ago I had to format my computer and lost a lot of stuff, after reinstalling premiere pro I got back to work recording my Let's Play videos.
Well when it came to editing everything worked the same. No issues whatsoever. It wasn't until I started rendering them out through Adobe Media Encoder that I started to have problems.
I've been using Fraps to record the gameplay footage, and created the project to match everything that the raw videos had.
Same framerate, size, audio, etc. Same thing with the rendering options in Adobe Media Encoder
I usually split my videos by 10 minutes to keep peoples attention on youtube, and use the uncut stuff for my blip.tv page. I generally stay within a 55 minute window, and those renderings used to work completely normally.
Now when I try to render longer vids (and on occassion I will get the issue with the short 10 minute ones) I will watch the video after rendering and see the audio and video start to desync as time goes on, sometimes the video freezes and the audio continues to play, and some other times the video will go completely black and the audio will continue on. It's very strange, and very aggrivating because it makes me waste more time to render the video again.
My computer deets:
Windows XP pro
AMD athlon II X2: 3.1 Ghz Dualcore
4 GB ram
Nvidia GeForce 9800 GT: 1 Gig VRam

>using Fraps
I don't, but some saved discussions that may help
these notes are for Premiere Elements, but may help with PPro
http://forums.adobe.com/thread/871095
http://forums.adobe.com/thread/943772
http://forums.adobe.com/thread/967201

The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

If you have lost all sound and video is freezing on you, that ain't good. Your iPad is two months old so I would not hesitate to contact Apple at all. You are entitled to 90 days of phone support.
http://www.apple.com/support/ipad/contact/.
If you want to try a couple of things on your own, try quitting all apps and then reboot the iPad - not so much for the sound issue itself - but more as a general "start all over again" sort of approach. It might help with the video freezes.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Reboot the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If you use headphones on occasion, you can try plugging and unplugging those as well and see if the sound comes back.
You could even try restoring the iPad to factory settings and then restore from a backup, but unless there is something totally hosed on the iPad, that should not be necessary with a two month old device - of course assuming that you didn't drop the iPad or do something accidental that could be causing the problems.

Replacement Program - ATI Radeon HD 2600 XT video issue

Mac Pro (Early 2008):
ATI Radeon HD 2600 XT video card with distorted video or no video
Last Modified: March 15, 2011
Article: TS3630
http://support.apple.com/kb/TS3630
Symptoms
Apple has determined that certain ATI Radeon HD 2600 XT cards sold for use in Mac Pro computers between approximately January 2008 and May 2010 may experience distorted video or no video.
Products Affected
Mac Pro (Early 2008)
Resolution
If your Mac Pro experiences distorted video or no video issues and has an ATI Radeon HD 2600 XT card in it, you will need to bring your computer's serial number and the graphics card into an Apple Authorized Service Provider or an Apple Retail Store location for verification and to exchange the affected graphics card for a replacement.

The replacement process as stated here
http://support.apple.com/kb/TS3630
is not correct.
Here is my first hand experience:
Have had the intermittent problems as described almost since the computer was new. After many calls to applecare and ROM upgrades, software upgrades and reinstalls, new boot drive - problem persisted until last week -now monitor stays on black screen on startup.
Called local Apple store as described in support page - they know nothing about it and you cannot talk to a tech on the phone - have to make appt. Asked the receptionist to please describe problem to tech and see if they might be able to help before I take the time to make appt. I was told that they don't handle that here - go to an outside service center. Of course its Friday and the outside service is closed until Monday. Call another apple store and make an appointment - they seam more willing to help.
Follow the instructions and remove board and take it with Mac serial number to store.
I am told that they will not release the replacement board unless they install it themselves in my computer. I politely point out that the service doc states otherwise - no dice. Tech orders the board - won't know until Monday what delivery schedule is - he guesses 2-3 days and they can install when it comes in.
Lesson learned.
You can't trust what apple says in a tech document - maybe you can't believe anything they say. Frustrating part is that you can't talk to anyone to get a straight answer until you nail someone down in person - and how do I know that the tech told me the right thing. After all, doesn't corporate dictate policy? I got the policy from the corp site. So which is right?
Do you think they would reimburse me if I went out and purchased a new board and did the replacement myself?
"If you believe you have paid for repair or replacement because of this issue, contact Apple regarding a refund."
I highly doubt it based on what the tech said - but who should I believe?

Blqack screen, no chime and it's not a video issue

Hi, I got a big problem and I will like to know what your thinking about.
When I try to open my Intel-Based IMac, there's no video. The screen is black but the light came on and the drive and the fan make a sound. The keyboard and the mouse doesnt work and the computer doesnt make a chime.
I tried to find some info on the website of apple
http://docs.info.apple.com/article.html?artnum=300537
but it's not the same problem. The fan and the drive is working but I dont have the chime. Then it's not only a video issue, it's not only the display who is not working because the mouse and the keyboard doesn't work and the chime didn't came on.
It's the second time it do that. I didn't install a new software for the last week. The fist time, the technical support told me it was probably a software issue. After a while, I was able to turn on my computer and I made every update. After that, I made a reboot and everything worked. I taught it was ok and I turned off my computer. After the night, the same problem came on. I tried again to turn on and nothing worked. Black screen, no keyboard, no mouse, light turn on, the drive and cd make a sound and no chime. And this time, I was not able to turn on after many reboot with the power button.
I think it's a problem with the computer himself and not a software issue but I dont want to send my computer to a apple store before to confirm it. I need my computer as fast as I can and I don't have a retail neer of my home.

Your symptoms, though not exactly the same, seem to indicate a problem with your RAM. The startup chime is a signal that your Mac has passed the Power On Self Test and suitable RAM was found. No startup chime is usually a sign of bad or poorly seated RAM.
Intel-based Mac Power On Self Test RAM error codes
I would start by removing the RAM modules and test them one at a time in each of the RAM slots to rule out bad RAM or a bad slot. Then seat both modules securely.
Intel-based iMac: Installing and replacing memory (RAM)

Jabber for iPad video issue

How can I troubleshoot video issues?
I setup the iPad device (G711) and then placed a call to a Jabber for Windows (G729) phone. Audio worked fine but no video. I changed the Jabber for Windows to G711 and video started working?
Is Jabber for iPad going to support G729 and if so when?
Thanks,
Doug

Hello i have the same issue!
Someone find the cause for this issue?
Regards
Leonardo Santana

Kernel Panic on iMac with Pixelated Video Issues

One of our work iMacs has been having weird pixelate video issues recently. Sometimes previews of program windows will freeze on screen... and as you move the window around the screen "erases" this preview from the LCD... It is a 2006 24" White iMac 6,1. Now we get some Kernel Panics with the following error message. Please help me decipher it. Thanks!
Interval Since Last Panic Report: 8641685 sec
Panics Since Last Report:          1
Anonymous UUID:                    E865F049-A575-4D59-A574-9D24C6EFD141
Fri Mar 30 07:35:41 2012
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x43923bb8 : 0x21b837 (0x5dd7fc 0x43923bec 0x223ce1 0x0)
0x43923c08 : 0x2abf6a (0x59e3d0 0x53c01f 0xe 0x59e59a)
0x43923ce8 : 0x2a1a78 (0x43923d00 0x0 0x43923da8 0x53c01f)
0x43923cf8 : 0x53c01f (0xe 0x48 0x10 0x10)
0x43923da8 : 0x53d2f5 (0x78f3000 0x785c240 0x43923df8 0x78f3000)
0x43923dc8 : 0x570fcd (0x78f3000 0x785c240 0x43923de8 0x2a45c9)
0x43923e18 : 0x28bb49 (0x78f3000 0x749a4a0 0x749a4b8 0x2106d8)
0x43923e58 : 0x21dbe5 (0x749a0a4 0x749a484 0x43923ea8 0x3a23)
0x43923e98 : 0x210a86 (0x749a000 0x0 0xbc747a0 0x7f6b690)
0x43923ef8 : 0x216f84 (0x749a000 0x0 0x0 0x0)
0x43923f78 : 0x295c57 (0x7daf5e8 0x0 0x0 0x0)
0x43923fc8 : 0x2a256d (0x7daf5e4 0x0 0x10 0x0)
BSD process name corresponding to current thread: Dock
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: iMac6,1 (Mac-F4218FC8)
System uptime in nanoseconds: 154254231492
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleHWSensor          1.9.3d0 - last loaded 121081986701
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.InternalModemSupport          2.6.2
com.apple.driver.AudioAUUC          1.57
com.apple.driver.AppleIntelYonahProfile          14
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleIntelPenrynProfile          17
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMCCSControl          1.0.20
com.apple.driver.AppleIntelNehalemProfile          11
com.apple.driver.AppleHDA          2.0.5f14
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleGraphicsControl          2.10.6
com.apple.GeForce          6.3.6
com.apple.driver.AppleIntelMeromProfile          19
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
com.apple.driver.AppleBacklight          170.0.46
com.apple.driver.AppleLPC          1.5.1
com.apple.driver.AppleIRController          303.8
com.apple.driver.CSRHIDTransitionDriver          2.4.5f3
com.apple.driver.USBCameraFirmwareLoader          1.1.0
com.apple.iokit.SCSITaskUserClient          2.6.8
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AppleUSBHub          4.2.4
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AirPortBrcm43xx          423.91.27
com.apple.driver.AirPortBrcm43224          428.42.4
com.apple.iokit.AppleYukon2          3.2.1b1
com.apple.iokit.IOAHCIBlockStorage          1.6.4
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleUSBEHCI          4.2.4
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleUSBUHCI          4.2.0
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.14
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f14
com.apple.driver.DspFuncLib          2.0.5f14
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.AppleProfileFamily          41
com.apple.driver.AppleHDAController          2.0.5f14
com.apple.iokit.IOHDAFamily          2.0.5f14
com.apple.driver.AppleSMC          3.1.0d5
com.apple.driver.IOPlatformPluginFamily          4.7.0a1
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.1
com.apple.nvidia.nv40hal          6.3.6
com.apple.NVDAResman          6.3.6
com.apple.iokit.IONDRVSupport          2.2.1
com.apple.iokit.IOGraphicsFamily          2.2.1
com.apple.driver.CSRUSBBluetoothHCIController          2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
com.apple.iokit.IOBluetoothFamily          2.4.5f3
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.driver.AppleUSBMergeNub          4.2.4
com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.8
com.apple.iokit.IOUSBMassStorageClass          2.6.7
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.iokit.IOATAPIProtocolTransport          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
com.apple.driver.XsanFilter          402.1
com.apple.driver.AppleFileSystemDriver          2.0
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IO80211Family          320.1
com.apple.iokit.IONetworkingFamily          1.10
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOUSBFamily          4.2.4
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.TMSafetyNet          6
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.3.0
Model: iMac6,1, BootROM IM61.0093.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 4 GB, SMC 1.10f2
Graphics: NVIDIA GeForce 7300 GT, NVIDIA GeForce 7300 GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST3320620AS, 298.09 GB
Parallel ATA Device: MATSHITADVD-R   UJ-85J
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000 / 2
USB Device: Express USB2, 0x0dc4 (Macpower Peripherals Ltd.), 0x00db, 0xfd500000 / 3
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x1d100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc50a, 0x1d110000 / 4
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020b, 0x1d130000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x7d100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x7d200000 / 3

Re: Kernel Panic on iMac Intel Core 2 Duo with Lion 10.7.1, 4gb RAM
27-sep-2011 11:53 (in response to jose guzman) Launch the Apple Hardware Test program, run the extended tests at least twice, and then download and run Rember. All indications are that you have bad or flaky RAM.
27" i7 iMac 10.6.8 , Mac OS X (10.7.1), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2)
I did that and it doesn't work

Time shift video issue

Similar Messages

Maybe you are looking for