Time since loop starting. Without Offset!!!!

I try to make an indicator that displays the time since the loop started. it sounds quite easy with the "Get time in seconds" and the "format time string". but I always have an offset of exactly 2 hours. Why????
this problem might be stupid but I don't find any solution.
Thanks for any help.

Format time string uses absolute time so what you see is the UTC offset in your timezone. If you format to include date, you will see that the offset is really 99 years since the epoch in LabVIEW is Jan 1, 1903 UTC.
You can use a numeric indicator and in Format and Precision, select "Relative Time" or write your own formatting VI for relative time if the relative time display doesn't fit your needs.
LabVIEW, C'est LabVIEW

Similar Messages

  • How do i change the time line in Au from time since recording start to the actual time?

    how do i change the time line in Au from time since recording start to the actual time? I have a recording that was started at 10:00 but obviously in Au it starts at 0:0:00. Basically i want to time shift this to 10:00:00

    In the Properties panel, modify the Start Time parameter.

  • Firefox 4 has already crashed at least a dozen times since I started using it less than a week ago. How do I go back to using the previous version?

    It crashes on many sites, but I've noticed it happening most often when using gmail.

    I had the same problem, so i re-installed FireFox 3.6.16 on my PC.
    First, I saved my FireFox bookmarks.
    I then Downloaded and Saved version 3.6.16
    The following mozilla page has FireFox 3.6.16 for download...
    http://www.mozilla.com/en-US/firefox/all-older.html
    I then uninstalled version 4 (via the Control Panel) and then I re-installed version 3.6.16 (the older version is working ok on my PC).

  • Write to Measurement File time column wrong starting value

    I am using Write tp Measurement File express VI.  I select to write one time column.  The values writtent in the time column start from a value that does not seem to correspond to anything in the program -- sometimes as much as 2-3 days before the saving begins.
    Can I force the starting value  of time to something, or get it to write the time since we started saving, or something predictable?

    Include code whenever available.  Asking somebody to troubleshoot your software without any code is like asking your mechanic to fix your car without taking your car to him.
    Source
    I don't recommend using the Write Express VI.  I recommend using the File I/O primatives because they allow for much more control over what gets written and how.  Still I would expect the Express VI to be able to write time properly so I'd assume there is some kind of bug with the data being given to the function.  Post some code so we can see what is going on.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • Editing Loop Start and End times via automation / MIDI controllers?

    I'm trying to play a sample in EXS24 and have the Sample Start, Loop Start and End times manipulated over the course of the song. I've tried to open up the EXS sample editor, click on the numerical value of the Loop Start, and then attempt to Learn Automation. All it does is assign the knob for the instrument Volume Level. Is there any way to do this? It's basically how an Akai S612 works: http://www.vintagesynth.com/akai/s612.shtml
    I switched gears and tried it also with Battery, and there's a way to map the Start and End times in there, but it's not seeming to work as I've intended. I can't seem to make the loops move as they should and there's ways to use up to 4 loops, but not a way to target each loop's start and end points via separate controllers.
    I could use my S-612 [and probably will], but in moments where I don't have one available, I'd love to find a solution to this.
    Thanks,
    +odd

    Anyone with any thoughts? would be great to solve this.

  • HT1414 i connected my iphone 5 to my computer for the first time since i got it and it didnt give me any option and just started to restore it from my iphone 4s. ive now lost all my pictures that were on it. Is there a way i can get them back!

    i connected my iphone 5 to my computer for the first time since i got it and it didnt give me any option and just started to restore it from my iphone 4s. ive now lost all my pictures that were on it. Is there a way i can get them back as i did not want it to restore my old phone anyway! i also had my hone set up to the cloud and it didnt work! PLEASE SOMEONE HELP ME

    Can you try to use another computer?
    If this does not work, visit an Apple Store or an Authorized Apple Service Provider next to your place, and show them the phone, maybe they can restore it before you'll have to get it serviced.
    Did you try to put it in recovery mode?
    iOS: Unable to update or restore

  • Purchased ML 3 weeks ago from Apps store, started to download then stopped "an error has occurred" tried numerous times since but no success. The ML icon looks to start but says waiting and so am I. Any guidance appreciated

    Purchased ML 3 weeks ago from Apps store, started to download then stopped "an error has occurred" tried numerous times since but no success. The ML icon looks to start but says waiting and so am I. Any guidance appreciated.
    iMac-Mid 2007 MacOSX V 10.7.5

    maybe this will help:
    https://discussions.apple.com/message/19032230#19032230%2319032230
    https://discussions.apple.com/message/19107160#19107160

  • Hello everyone i want to know if i download osx mountain lion on my macbook air paying it s price from the apple store can i download it on my iMac without paying it s price another time since I would ve  paid it the first  time

    hello everyone i want to know if i download osx mountain lion on my macbook air paying it s price from the apple store can i download it on my iMac without paying it s price another time since I would ve  paid it the first

    yes, once paid for, you can download it for free on any other mac you own.

  • Yosemite starts up twice all the time since update

    Yosemite starts up twice all the time since update,  haven't done the PRAM reset but was hoping I didn't have to do that, does anyone know why it does it?

    Good news re it stopping
    For Modesty0007,
    If the problem doesn't occur on a new account it most likely means you have a process running on your other account that uses up a lot of CPU, making your computer temperature go up and the fan spin harder in turn.
    Go back to your usual account and have a look in Activity Monitor to see if you have a process running that fits the description.

  • I have had FPCX since Sept, first used Oct.  I have not had one 'movie' export properly, first time since using FPCX.  Audio stops completely at some point and does not re-start.  Any ideas, folks?

    I have had FPCX since Sept, first used Oct.  I have not had one 'movie' export properly, first time since using FPCX.  Audio stops completely at some point and does not re-start.  Any ideas, folks?

    First, I suggest you limit the subject line of your question to a few words which will help someone identify the problem you are encountering. Putting the entire question there looks as though you are shouting.
    It would help anyone to identify your problem if you were to say what video codec (file format) you are using, and describe the method you are using in your attempts to export it.
    You could also list any relevant error messages you encounter.
    What version of FCP X are you using?
    All these things will make it easier for people to help you.
    Andy

  • My brand new mac book pro, which I've only turned on about 20 times since I purchased it, start making a loud constant clicking noise today -- it sounded like a combination of a computer notification tone and a weird druming sound.  What's the problem?

    my brand new mac book pro, which I've only turned on about 20 times since I purchased it, start making a loud constant clicking noise today -- it sounded like a combination of a computer notification tone and a weird druming sound.  What's the problem?
    Is this thing a piece of junk?  My MacBook Air is running fine.  I've literally only charged the MacBook Pro battery a handful of times -- it's brand new.

    At these prices don't screw around.  Just call applecare to arrange an appointment at the nearest apple store. 
    Alternatively post in the Macbook Pro forum.  This is the Mac Pro forum.

  • Start WorkprocXX, 1 times since system startup.

    Getting a bunch of messages like this is the system log:
        Start Workproc14, 1 times since system startup. PID 21175
    Looking at the trace file for one of these I see stuff like this:
        Tue Jan  6 07:03:44 2009                         
         WP has reached abap/heaplimit = 40894464 bytes  
        Tue Jan  6 07:04:19 2009                         
         ThNeedWpRestart: abap strategy == kill, restart 
         ThWpRestart: restart wp (pid=21140) automatically
         Disconnecting from ALL connections:             
    Nothing seems to be failing but I haven't been able to find any doco on this.  So what's it telling me - that the processes are using too much memory?

    Hai,
    You are right this is due to abap/heaplimit parameter.
    If the value of abap/heaplimit has been reached, the work process is restarted after the dialog step has ended. If the consumption of heap memory exceeds the quota abap/heaparea_(non)dia, the user context being executed at this time is cancelled before it can be completed.
    Always the value of the parameter abap/heaplimit should be smaller than abap/heap_area_dia or abap/heap_area_nondia, so that the dialog step that is running can still be executed. This prevents the work process from working against the operating systemu2019s swap space limit.
    In your case the wp in question has reached the heap limit and then it got restarted.
    This is common, but if you want to overcome this issue you can tune the memory parameters, but you need to be very careful in doing that. Because bad tuning can lead to poor performance of the system.
    Have a look on the below link:
    http://help.sap.com/saphelp_nw04/helpdata/en/02/962acd538111d1891b0000e8322f96/frameset.htm
    Regards,
    Yoganand.V

  • My ipad is on an infinite loop.  I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started.  I have tried pressing the power and home button at the same time, but it doesn't work. Please help!

    my ipad is on an infinite loop.  I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started.  I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
    I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
    I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.

    You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
    Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • I am running Itunes in Windows 7. Every time I exit, it restarts in a few seconds. If I restart my compter and forec close it, it does not restart, but If I use it at all the whole loop starts again.

    I am running Itunes in Windows 7. Every time I exit, it restarts in a few seconds. If I restart my compter and forec close it, it does not restart, but If I use it at all the whole loop starts again.

    Sorry, just to confirm, I DID NOT ACTUALLY ANSWER MY OWN QUESTION!
    I replied to the previous message from my iphone and I managed to hit the link to "This has answered my question" by accident!
    I AM STILL LOOKING FOR A RESOLUTION TO MY ORIGINAL PROBLEM. CAN SOMEONE ALSO NIW TELL ME HOW TO GET RID OF THE GREEN TEXT TGAT SAYS TGAT MY QUESTION IS ANSWERED? That is a pain! It should at least ask you to confirm that your question is actually answered and you didn't hit it by mistake, like I did!

  • I lost my contacts, texts etc after syncing my phone to itunes for first time since 2012, now all I have is info. starting from 2012.  Is there any way to recover the contacts, texts etc that I have lost for the last 2 years? So ticked off at apple!

    I am hoping that someone can help me understand how it can be so easy to lose the last 2 years data on an iphone by synching to itunes for the first time since 2012?  If this happens from itunes automatically overwriting your phones system why would'nt there be warnings and red sirens going off on your phone?  Can somone please let me know if this lost data is recoverable and maybe even let me know how to recover it?
    Thank you

    Glad to help!  The reply you got was very generic and didn't completely address your questions.
    Basically, all it said was to restore your backup.  What I addressed was your query about how and why this happened. iTunes did give you prompts and warnings. And if you'd used iTunes back in 2012, then you'd have lost much less data when you made the incorrect selection.
    Do you have an iCloud backup?  Were you backing up your device at all?
    I just found it amusing that you were 'ticked off at Apple' when Apple didn't cause this problem.  You did.
    Have a great day!

Maybe you are looking for