Time Stamp Error In ODS
Hi ALL
When I tring to load data from ODS1 to ODS2,an error is coming like Time Stamp Error.
And when IAm trying to activate the Transfer structure,I could'nt able to find Activate Symbol?
What should I do now in oredr to activate this?
Pl help me out
Regards
Balaji
Hi
Eugene
Thanks for your valuable message.
As u said I went into that program and executed that and it asked for Source system and Infosource and updated and executed,but everything is in green but saying like Transfer Structure is not selected. and when I run the infopackage load is failing?
And 2 check boxes are there like 1.Lock Objects and 2. Inactive objects.
Should v need to select this.
What will be the problem?How to rectify it.
Pl let me know.
Regards
Balaji
Similar Messages
-
Time stamp error, bug...
Hi all,
I am currently doing a lot of work late at night and I've discovered a replicable, strange behaviour in the finder.
All files saved at or just after midnight have a time stamp of "Today 24:03" (example only).
This should read: "Today 00:03".
Midnight in the 24h clock is 00:00, and 11:59 (one minute to midnight) is 23:59, so the moment the date changes, time should start clicking UP from 00:00.
24:03,4,5 etc. simply does not exist, it's like saying 75minutes past 4 for example...
What's going on here? Is there a fix?
cheersHi Venkat,
The units of data stored inside the data warehouse are timestamped so that each unit of data in the data warehouse has some element of time associated with the record. The timestamping of data warehouse data signifies that the unit of data is accurate as of the timestamp. In general, there are two ways that a record is stored in the data warehouse: discretely or continuously. In a discrete record there is one instant in time for which the record is accurate. In a continuous record, there is a span of time for which the record is accurate. These records form a larger definition of information over time.
Using timestamps usually leaves a gap in time between the timestamp being logged and the transaction being updated, however. Hence, some documents
may be missed if they have not yet been committed to the database. To mitigate
this risk, SAP often uses a safety delta concept, setting back a users timestamp selection for a few hours to avoid missing late updates.
Time stamp error's occur in different situations.Depending on the situation we need solve the problem..
Some times you need to replicate the data source and activate the transfer rules...
If copa load fails you need to act differentlyand so on..
Check these threads.
/message/3146401#3146401 [original link is broken]
Time Stamp Error
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=time%20stamp%20error&cat=sdn_all
Re: Time Stamp Error In ODS
Hope this helps.
Regards,
Ravikanth -
Time Stamp Error while extracting data from R/3
Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba RaoHi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu -
Hi All,
I am using Labview8.5 and Windows XP OS.
My Problem is my Labview TimeStamp cannot display current system date and time.
Please see my attachment for the screentshot.
The TimeStamp or ever Format Date/Time String display "YYYY-MM-DD" instead of "2014-08-02".
I tried other computer machine and it works. There are some computer machine has this problem.
How can I resolve this issue? Please advice. Thanks.
Best Thanks,
Jessie
Attachments:
Time Stamp error.JPG 68 KBBill,
reviewing the thread Dennis linked (thanks for that) reveals that it is the same account which opened this thread here three month later.
What bothers me is the fact, that the past thread is marked "solved" even though it obviously isn't. Or the OP is trolling us.....
Nevertheless, it seems like systematic error. Connected to specific machines.
What makes the machines where the time stamp issue occurs "unique"? If there are several, is that source really "unique"?
Most obvious reasons would be:
- Language settings (possibly the infamous "dot-comma-issue")
- Time zone settings (e.g. what happens if you switch Ulaanbaatar to Perth or maybe even some US time zone?)
- Missing hotfixes for Win and LV
- Is the system running as virtual machine vs. "native"?
Not so obvious differences:
- Specific CPU type
- Motherboard/BIOS
- LV ini settings
There are tons of other possible reasons (e.g. corrupt LV installation), but these are the ones i came up with within a couple of minutes....
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
What does "Exif Time Stamp Error" mean?
Hi there,
could anyone be so kind and explain to me the meaning / impact of the "Exif Time Stamp Error" that was introduced in the 1.4 update for lightroom?
I imported about 200 pics yesterday and converted let them be converted to the DNG format automatically.
Actually I did not see any errors or strange behaviours. Will this change when working with these pics? Do I have to take some kind of countermeasure?
Kind regards,
J. Toennissen
MacBook, Mac OSX 10.4 (Tiger), Lightroom 1.4Dear Franz,
thank you for your post but I already read through this text and after I did not get the point (maybe because of my by far not perfect English) I did search the forums. But I did not find any furher explanation.
There I wrote this post.
So, as a special rule, sometimes people do use the search and really need help. ;-)
Jan -
Problem Occrued in Data loading (Time Stamp Error)
Hi,
Iam scheduled info package after its showing time stamp error in the monitor menu header status is red and details menu 0 records . time stamp error in the source system.
my problem is i have all genric transaction data sources i checked in R/3 in RSA3 and Rsa6 i excuted in that particular data sources are active and its contain some records also.
before loading the data i replicated all data sources these all active in BI system. but once scheduled the infopackage all data sources going to in active status.
i Tried to Execute T code SE38 in BW give programme name as RS_Transtrucuture_activate .
but i dont have authorisation these program to excute.if i want get authorisation i have to wait 3 days.
please suggestme another solution procedure.
Regards,
Diwa(Devakar tati Reddy)Hi,
I am not sure about what BW version are you using. I hope you are using 3.5 or low. After Datasource replication you need to activate your transfer structure / infosource. I understand that you dont have authorization to run the SE38 program to activate the transfer structure. But, you can also try to activate each transfer structure/infosource individually through edit mode of the same. This is the only way out if you donot have the authorization for SE38.
Regards
Kishore -
Time stamp error in Date management
Hi All,
I have defined a date rule and date profile which is copied from the rule VALID003 (i.e. today's date + 3 days) and assigned to transaction type 0010 (Business Activity). But its giving an error as below:
Error when converting time stamp in date/time time zone INDIA.
But when i test the rule separately it giving the correct result.
What could be the problem ?
Regards
SiddHi,
Check for the system date and time and the today's date and time being picked yup in your activity.
system date and time can be checked by -
SAP easy access Menu go to system -->status
This time should be there in your date type giving valid from time so that the rule can add to this time.
Hope it helps
Regards
Raj -
Can anyone please tell me why my Mac is time stamping my files as it saves them with a time that is correct minute-wise but seems to be running in a different time zone as it's 3 hours early? The system clock is correct, as are its settings, time zone etc. Thanks
Incorrect date or time displayed in various applications
-
hi dear experts if we get time stap error in bw 3.5 i know how t o resolve for this we got se38 and we give a program RS_TRANSTRUE_ACTIVATE _ALL .But in bi 7 how to handle is there any program plz clarify this problem.
Thanks in advance
ramesh.Hi
we can replicate the datasource from source system and then try by actuvating the data source by using the program RSDS_DATASOURCE_ACTIVATE_ALL.
Then we can try by reloading the data. i fell this will solves the issue in BI7
M -
Time Stamp Error not activating,Roberto Pl look
Roberto
In continuation with the previous topic......
<b>Sorry,for not getting your words</b>?
That particular field(ZZxxx) is <b>not available in the datasource</b>,But its been <b>available in the Transfer structure</b>?
Now what should I do?
Many Thanks
balajiRoberto
according to your statements understood like this,pl comment is it <b>correct or wrong</b>?
In <b>Datasource/Transfer Structure</b> Tab
First,<b>Datasource is from R/3 side</b>,On right hand side
here v have fields coming from source system(r/3)
Second,<b>Transfer Structure</b> on left hand side
here v have Infobjects from BW
In <b>Transfer Rules</b> tab
In left hand side v have <b>communication structure</b> and in right hand side v have <b>Transfer Structure</b> from BW side.
First mapping will be done between Datasource and Transfer Structure(done automatically)
Second,(In Transfer Rules Tab)<b>Transfer structure</b> and <b>communication structure</b> will be mapped,here its called as <b>Transfer rules</b>
Is it this way,pl let me know exactly what's happening in this scenario?
Many Thanks
balaji -
Error when converting time stamp in date time time zone CST in IC
Hi Experts,
We have recently upgraded from CRM 5.0 to CRM 2007. We are using IC WEB Employee interaction center.
so when agent create service ticket in interaction center and close the ticket on same day we are getting an error saying Error when converting time stamp in date time time zone CST.
we thought there may be problem while installing SAP CRM by basis team in time zone, but we did not find any problem.
So please advice how to resolve this issue.
Regards,
TejaHi Teja,
I saw a similar message, and it was resolved by adding a timezone to the user profile defaults tab in SU3. I believe the system has been configured to convert between users' timezone and the system timezone, therefore it needs to know each users' timezone.
Regards,
Simon. -
Error messages when sending date-time stamp to Oracle Database
I have a complex application that communicates with an Oracle database. One of the table values that gets written to the table is a date-time stamp. Until recently, the user only required a date, and this was never an error. (The format String used was %d-%b-%Y) Now they need a time-stamp as well, so I attempted to edit the format string input of the format date/time string function to include the time. I have tried numerous format strings, each of which returns an error on execution. Depending on which format I use, I get one of 3 different error messages. The really odd thing is that both the date and time always get stored in Oracle without any problem (regardless of what date-time I use, as long as I include the date and any part of a time stamp - I get the entire timestamp even if I only include %I for the hour). The only issue is that LabVIEW generates an ODBC error if I try to include the time to the date-time stamp. In other words, teh date/time stamp writes to the Oracle database, but an ODBC error occurs every time. I've included a word doc with screen captures of the format strings used, the resultant date/time stamps written to Oracle and the error messages generated within LabVIEW. Any advice would be most appreciated.
Attachments:
Summary of ODBC Error messages related to date-time stamp.doc 65 KBOracle has a standard date format: 12-Mar-2009 that it accepts as a string, but if you want more than that, you need to use the todate() function. I used this string going into the standard LabVIEW ''Format date/time sting vi'
to_date('%d-%b-%Y %H:%M:%S', 'DD-MON-YYYY HH24:MIS') to create the value needed for Oracle.
Then I use standard format string to create SQL: insert into mytable (mydate) values(%s) and select * from my table where mydate = %s using the string above for %s.
I think you can also define a global format for all time strings but I haven't bothered figuring that out. -
Error when add seconds to Time Stamp format
Hi,
I've created a subVI that transform an string data/time to Time stamp format.
The subVI seems that it works fine, but when I use the data 26/10/2014 and I add 1 day, it crashes! The result is 26/10/2014 23:00:00 instead of 27/10/2014 00:00:00.
Cordially
Vicen
Solved!
Go to Solution.
Attachments:
Convert Date-Time strings to Seconds.PNG 405 KB
Sha Convert Date-Time strings to Seconds v2.vi 24 KBThank you both!
I think I've solved the problem.
Vicen
LV 2010/2011 on WinXP/Win7
Attachments:
Sha Convert Date-Time strings to Seconds v2b.vi 26 KB -
Format Time Stamp String for excel error
Hi all,
I am currently trying to format the time stamp from labview to excel, in an excel recognizable format. Ive attached a photo of that part of the vi. The time stamp is formated correctly when it leaves the format time stamp block and after it leaves the build array block, but when it is written to excel file it is formated in what looks like a standard format and excel does not recognize this as a time stamp.
Any ideas to fix the issue?
Thanks
Attachments:
Time stamp.PNG 7 KBThe Example Finder has a few ActiveX examples I think one uses Excel.
Also if you have the Report Generation Toolkit I think this is what you need
http://digital.ni.com/public.nsf/allkb/38D7104644E0F7A5862578B1001A86C5
It sets the cell format to be how you want. The default for a timestamp is "m/d/yyyy h:mm".
BUT I just think I have an easier solution. The problem is it correctly detects that this is a time stamp, but the cell format is incorrect. If we convince it that it is a string it will look right and I assume that's all that matters. So add a space to the front of your time, so have the format be " %Y-%m-%d %H:%M:%S" (notice the space) and I think it will look the way you want because Excel thinks it is a string.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously. -
Hello,
I got mistake in ODS manage like this:
The time stamp in the source system is 24.09.2007
The time stamp in the BW is 23.05.2009.
I have problem to load data in ODS.
What should I do ?? Replicate the data source ? But then it's possible to get double data. What to do ??
THXI replicated data source, source system and loaded data one more time and I have got the same mistake.
this:
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
An error occurred in Service API .
Check the error message.
Procedure
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request.
AND ALSO mistake WITH TIME STAMP
Maybe you are looking for
-
Loading 361000 records at a time from csv file
Hi, One of my collegue loaded 361000 records from one file file , how is this possible as excel accepts 65536 records in one file and even in the infopackage the following are selected what does this mean Data Separator ; Escape Sign " Separat
-
<soapenv:Envelope xmlns:soapenv= "http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns="urn:xxx/xx/ecbs/object/" xmlns:quer="urn:xxx/xx/ecbs/object/Query"> <soapenv:Header/> <soapenv:Body> <ns:operation_Input> <quer:ListOfContact pagesize="100" startr
-
Batch determination in production order
Hi all, Raw materiala are manged in batches and finished products are in serial numbers. when I release the production order the batch is not determining automatically. can any body expalin the SPRO settings for automatic determination of batch. Than
-
Calculate function in a PDF form
I created a form from an existing PDF file, and got all the fields with no problem. When I try to designate a field as a calculated field, however, it won't let me select individual fields. It only lets me select all or none. Anyone else have this
-
cannot change home page. have moved and home page continues from last residence (router: 192.168.1.1). I now want a different home page. I have tried Tools>Use Current>OK, but my old 192.168.1.1 keeps coming back.