Time Stamp Error not activating,Roberto Pl look

Roberto
In continuation with the previous topic......
Sorry,for not getting your words?
That particular field(ZZxxx) is not available in the datasource,But its been available in the Transfer structure?
Now what should I do?
Many Thanks
balaji

Roberto
according to your statements understood like this,pl comment is it correct or wrong?
In Datasource/Transfer Structure Tab
First,Datasource is from R/3 side,On right hand side
here v have fields coming from source system(r/3)
Second,Transfer Structure on left hand side
here v have Infobjects from BW
In Transfer Rules tab
In left hand side v have communication structure and in right hand side v have Transfer Structure from BW side.
First mapping will be done between Datasource and Transfer Structure(done automatically)
Second,(In Transfer Rules Tab)Transfer structure and communication structure will be mapped,here its called as Transfer rules
Is it this way,pl let me know exactly what's happening in this scenario?
Many Thanks
balaji

Similar Messages

Problem Occrued in Data loading (Time Stamp Error)

Hi,
Iam scheduled info package after its showing time stamp error in the monitor menu header status is red and details menu 0 records . time stamp error in the source system.
my problem is i have all genric transaction data sources i checked in R/3 in RSA3 and Rsa6 i excuted in that particular data sources are active and its contain some records also.
before loading the data i replicated all data sources these all active in BI system. but once scheduled the infopackage all data sources going to in active status.
i Tried to Execute T code SE38 in BW give programme name as RS_Transtrucuture_activate .
but i dont have authorisation these program to excute.if i want get authorisation i have to wait 3 days.
please suggestme another solution procedure.
Regards,
Diwa(Devakar tati Reddy)

Hi,
I am not sure about what BW version are you using. I hope you are using 3.5 or low. After Datasource replication you need to activate your transfer structure / infosource. I understand that you dont have authorization to run the SE38 program to activate the transfer structure. But, you can also try to activate each transfer structure/infosource individually through edit mode of the same. This is the only way out if you donot have the authorization for SE38.
Regards
Kishore

Time Stamp Error: Cannot display system date and time. My VI display "YYYY-MM-DD" instead of "2014-08-02".

Hi All,
I am using Labview8.5 and Windows XP OS.
My Problem is my Labview TimeStamp cannot display current system date and time.
Please see my attachment for the screentshot.
The TimeStamp or ever Format Date/Time String display "YYYY-MM-DD" instead of "2014-08-02".
I tried other computer machine and it works. There are some computer machine has this problem.
How can I resolve this issue? Please advice. Thanks.
Best Thanks,
Jessie
Attachments:
Time Stamp error.JPG ‏68 KB

Bill,
reviewing the thread Dennis linked (thanks for that) reveals that it is the same account which opened this thread here three month later.
What bothers me is the fact, that the past thread is marked "solved" even though it obviously isn't. Or the OP is trolling us.....
Nevertheless, it seems like systematic error. Connected to specific machines.
What makes the machines where the time stamp issue occurs "unique"? If there are several, is that source really "unique"?
Most obvious reasons would be:
- Language settings (possibly the infamous "dot-comma-issue")
- Time zone settings (e.g. what happens if you switch Ulaanbaatar to Perth or maybe even some US time zone?)
- Missing hotfixes for Win and LV
- Is the system running as virtual machine vs. "native"?
Not so obvious differences:
- Specific CPU type
- Motherboard/BIOS
- LV ini settings
There are tons of other possible reasons (e.g. corrupt LV installation), but these are the ones i came up with within a couple of minutes....
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Time Stamp Error In ODS

Hi ALL
When I tring to load data from ODS1 to ODS2,an error is coming like Time Stamp Error.
And when IAm trying to activate the Transfer structure,I could'nt able to find Activate Symbol?
What should I do now in oredr to activate this?
Pl help me out
Regards
Balaji

Hi
Eugene
Thanks for your valuable message.
As u said I went into that program and executed that and it asked for Source system and Infosource and updated and executed,but everything is in green but saying like Transfer Structure is not selected. and when I run the infopackage load is failing?
And 2 check boxes are there like 1.Lock Objects and 2. Inactive objects.
Should v need to select this.
What will be the problem?How to rectify it.
Pl let me know.
Regards
Balaji

What does "Exif Time Stamp Error" mean?

Hi there,
could anyone be so kind and explain to me the meaning / impact of the "Exif Time Stamp Error" that was introduced in the 1.4 update for lightroom?
I imported about 200 pics yesterday and converted let them be converted to the DNG format automatically.
Actually I did not see any errors or strange behaviours. Will this change when working with these pics? Do I have to take some kind of countermeasure?
Kind regards,
J. Toennissen
MacBook, Mac OSX 10.4 (Tiger), Lightroom 1.4

Dear Franz,
thank you for your post but I already read through this text and after I did not get the point (maybe because of my by far not perfect English) I did search the forums. But I did not find any furher explanation.
There I wrote this post.
So, as a special rule, sometimes people do use the search and really need help. ;-)
Jan

Time stamp error, bug...

Hi all,
I am currently doing a lot of work late at night and I've discovered a replicable, strange behaviour in the finder.
All files saved at or just after midnight have a time stamp of "Today 24:03" (example only).
This should read: "Today 00:03".
Midnight in the 24h clock is 00:00, and 11:59 (one minute to midnight) is 23:59, so the moment the date changes, time should start clicking UP from 00:00.
24:03,4,5 etc. simply does not exist, it's like saying 75minutes past 4 for example...
What's going on here? Is there a fix?
cheers

Hi Venkat,
The units of data stored inside the data warehouse are timestamped so that each unit of data in the data warehouse has some element of time associated with the record. The timestamping of data warehouse data signifies that the unit of data is accurate as of the timestamp. In general, there are two ways that a record is stored in the data warehouse: discretely or continuously. In a discrete record there is one instant in time for which the record is accurate. In a continuous record, there is a span of time for which the record is accurate. These records form a larger definition of information over time.
Using timestamps usually leaves a gap in time between the timestamp being logged and the transaction being updated, however. Hence, some documents
may be missed if they have not yet been committed to the database. To mitigate
this risk, SAP often uses a safety delta concept, setting back a users timestamp selection for a few hours to avoid missing late updates.
Time stamp error's occur in different situations.Depending on the situation we need solve the problem..
Some times you need to replicate the data source and activate the transfer rules...
If copa load fails you need to act differentlyand so on..
Check these threads.
/message/3146401#3146401 [original link is broken]
Time Stamp Error
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=time%20stamp%20error&cat=sdn_all
Re: Time Stamp Error In ODS
Hope this helps.
Regards,
Ravikanth

Time stamp does not update automatically

Hi, All. I want include the time stamp (yyyy-mo-dd-min-sec) in the file name. However, the value of the time stamp does not update automatically/synchronizes with the computer clock at each new run. I need to do it manually with the right click and update the time to the current.
How can I solve this? Thanks a lot in advance.

What does this have to do with NI counter/timer hardware?
What language are you using and what function are you using to get a timestamp? If the language is LabVIEW, then all you need is Get Date/Time in Seconds. If you are using a front panel Time Stamp control, then you are using the incorrect function.

Time Stamp Error while extracting data from R/3

Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba Rao

Hi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu

LVM file time stamps - time stamps are not uniform

My LVM files do not have evenly separated time stamps. Is this by design? I want to record data from multiple channels at say 100S/s and see this in my LVM file. Ideally each of the 100 data points would be separated by 0.01s. This is not what I get.
I have tried changing the samples per second and the samples per channel inputs on my timing and read VIs but I don't get even spacing. I have figured out that the DAQmx Read VI always cuts the number of samples in the file in half. So sampling at 100S/s gives me 50 data points per second in my LVM file. Given that it cuts the points in half, I would like the spacing to be .00, .02, .04 etc., but I get this: .00, .01, .02, .03, .08, .09, .10, .11, .16, .17, .18, .19...
Is this normal or am I missing something?
HP

Unfortunately, I am not a DAQ user (the last time I really used DAQ was 7 years ago, before DAQmx was created). So, I have never seen your DAQ read issue.
LVM, on the other hand, I am intimately familiar with. Using the write to spreadsheet will almost always be faster than the LVM write. Under the hood, LVM write uses write to spreadsheet, but also handles a lot of other bookkeeping (you can look yourself by converting an LVM Express VI to a normal VI and diving into it). Your biggest issue will be saving the timestamps correctly. If you are using the waveform datatype from the DAQ read, the timestamp is included, so getting it right is not an issue. Formatting it in a text format for save is.
Precisely what are you trying to do? From you earlier post, it appeared you were taking one set of several channels of data every 10ms and writing to disk. Depending on how you use the LVM write, you may be attempting to open the file and close it at every write. This would be very slow and could account for your jitter. Saving at every data point is also very inefficient. You can stream at disk rate limited speeds (~10 - 60 MBytes/sec, depending on your hardware) if you optimize your buffer and disk write sizes. Optimum disk write size is about 65,000 bytes for Windows XP. Your data is probably far less than that.
Please post more details and code and I will try to help you more.
This account is no longer active. Contact ShadesOfGray for current posts and information.

ESS Time Statement Report not Active?

I am running ERP2004 ESS with IDES. I think were on SP9. I have adobe document services installed and its working ok with other reports, however when I try to run the Time Statement report I get an error "Print program not activated for form SAP_TIM_99_0001".
I tried going into transaction HRFORMS to active it, but it says there is an error in the code, some variable is not declared. The code is out of the box and can't be changed so I'm thinking these could be the possible problems:
     1. The SAP_TIM_99_0001 form delivered in the SP has errors and I need to apply a new SP level.
     2. I am not trying to active the program right. (Currently I am going into HRFORMS, selecting the report, then activating it)
     3. There needs to be some configue done that will help this compile right.
Please let me know if you have any insight to this problem and if you have it working yourself.
Thanks,
Tom Ficker

Hi Tomas Ficker
I have the same problem but now in another version.
I'm working with ERP2005 ECC 6.0 Portal: 2004s SP7
When I try to open the Time Statement in the workset Working Time I receive the same error message, but in this case, say that the Form SAP_TimeSlip is missing.
I went to that transaction you mencioned and the Form is already Activated.
Can you help me with this issue?
Thanks a lot
Sónia Santos

Time stamp error in Date management

Hi All,
I have defined a date rule and date profile which is copied from the rule VALID003 (i.e. today's date + 3 days) and assigned to transaction type 0010 (Business Activity). But its giving an error as below:
Error when converting time stamp in date/time time zone INDIA.
But when i test the rule separately it giving the correct result.
What could be the problem ?
Regards
Sidd

Hi,
Check for the system date and time and the today's date and time being picked yup in your activity.
system date and time can be checked by -
SAP easy access Menu go to system -->status
This time should be there in your date type giving valid from time so that the rule can add to this time.
Hope it helps
Regards
Raj

Time stamp is not getting updated for File Adapter in communication channel

Hi All,
Since yesterday, I am observing that the time stamp of communication channel for File adapter is not gettingupdated some times.
I had to stop and start the communication channel to update the time stamp.Please let me know if anyone has come across such issue or any useful notes on this.I could not find any related notes on Market place.
Regards,
Dinakar

Hi,
This is happening only with one communication channel which is sender in derection.Any reason why it is happening like this?since the restart of the communication channel it is getting update now.I really do not know how to delete/create the communication channels as this was done our PI consultants.Pls guide me.
Regards,
Dinakar

Folders last modified time stamp are not updated in Windows 7

After changing any .cpp file in Visual Studio, the last modified time stamp for the file's folder
IS NOT updated. What's happening ?
However when I change a Word (.docx) file, the last modified time stamp for the file's folder
IS updated ! How come ?

Hi,
If you thought this issue gets worse and if you have already set NtfsDisblesLastAccessUpdate to 0, then please revoke it to 1.
From the above Blog we can see that in Windows 7, the "Last Modified" field on log files is not updated when a program attempts to open the file or the utility is stopped, this is a design change to NTFS , becase we cache the metadata for
folder contents and do not refresh it until a handle is closed on an open file or an explicit call is made to retrieve the properties of an individual file.
Per your current issue that even if you closed these Vistual Studio files, the timestamp still didn't update. Please try the following and check whether any of them work:
- open the file in a second program
- view the proprties of the file
- "dir <filename>" at a command prompt
In addition, if you edit these Vistual Studio files with Notepad(Before doing that, please close all the programs include Vistual Studio) and try to reproduce the issue, does the issue still occur?
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Why does Time Stamp Control not produce a Absolute Time output?

I have used the the Time Stamp Control for manual input of measurement information. However, this control produce a time stamp in relative time which is unwanted. I thought that Time Stamps always are in Absolute Time. Is this not true? The control is very handy for time and date inputs. Is there a way of changing the output to relative time?

I will try to be more specific:
There is a Time Stamp Control available in the controls palette for use on the front panel. This can be used to set a variable called Time Stamp with values of time and date. It has a time and date browser which is very convenient to use and I like to use it. The time format I prefer in this case is Absolute Time which is time-zone-independent and it is the number of seconds elapsed since 12:00 a. m., Friday 1, 1904, Universal time according to LabVIEW help. However, the output from the Time Stamp Control is in Relative Time which I think is the Absolute Time compensated with Dayligth Saving Time and the local Time zone setting in your system.
Time Stamps are always in Absolute Time I think but not in this case.
My problem may be solved with a VI similar to "Format Date/Time String Function" but with a time stamp input and output, since this VI converts from Absolute time to Relative time. Even better is of course having a Time Stamp Control where you can select between absolute and relative time.

Time stamp error

Can anyone please tell me why my Mac is time stamping my files as it saves them with a time that is correct minute-wise but seems to be running in a different time zone as it's 3 hours early? The system clock is correct, as are its settings, time zone etc. Thanks

Incorrect date or time displayed in various applications

Time Stamp Error not activating,Roberto Pl look

Similar Messages

Maybe you are looking for