Time Stamp not being created correctly

Afternoon,
Unfortunately, when writing a timestamp using GET TIME STAMP FIELD f the time contained with field f is one hour behind what it should be.
Also when we use the command CONVERT DATE d TIME t DAYLIGHT SAVING TIME dst INTO TIMESTAMP tst TIMEZONE tz where sy-uzeit = t, sy-datum = d, sy-dayst = dst (X) and sy-zonlo = GMTUK the time within tst is still one hour behind.
The system time is set to GMTUK as is my userID. This issue has arisen since the UK switched to daylight saving time last Sunday.
If anyone can provide an explanation as to why this is I would appreciate it.
Thanks and regards
John.

Sudheer,
Thanks for pointing me in the direction of that blog. It provided to be very useful. When getting a time stamp the system always returns UTC (Universal Time Coordinated) and ignores if daylight saving time is in operation.
To convert a timestamp you use convert time stamp and use the time zone sy-zonlo to get the correct local time.
Thanks and regards
John.

Similar Messages

File names are not being created correctly!!

Problem I have, and it seems to be an issue with iTunes in Windows and not Mac or in Windows Media Player for that matter.
Anyway, the problem is that the files are not being written as they are displayed in the Album Data in iTunes itself. It just appears as though iTunes will create any length of file name it wants and not the one that you create??
The reason I have an issue with this, is because I am trying to create one large album directory on an external Hard Drive connected to my Router so that any machine I have on the network can access it from there as opposed to creating a directory on every single machine.
I have a tone of discs that I am loading up and just felt that having one large directory on a networked drive would be the best route to take.
The machines I will be using to access the files using iTunes is my Mac Mini and my Windows PC depending on what room I am in, and then probably a few other devices scattered around the house to make up a Media network.
Anyway, the issue is with the file names.
It just seems that Windows iTunes wants to create whatever file name size it pleases, where as Mac iTunes and Windows Media Player seem to create the files as listed in the Track List and Album File Data.
It would seem that Windows iTunes has a serious bug in it's File Structure Handling which is a pain in the proverbial.
Just to test this out, I created the same Album both in Windows and Mac and the Mac version had the full file name structure but the PC one doesn't, however, Windows Media Player created it exactly the same as Mac iTunes.
It definitely appears as though there is an issue with iTunes in Windows, because it creates other albums without a problem. It just seems to pick and choose as it pleases.
Anyone else get this or know if there is a way to fix it??

Katrina S. wrote:
I'm not sure what you mean. Perhaps if you gave a specific example?
I put my CD's into iTunes so that they go in Album Format with the albums in seperate folders and the song names as they are retrieved from the internet, so that they are not songs all in one long Directory Listing. (Unless of course there is another way of using iTunes??)
When using iTunes on Mac or the Windows Media Player, all the songs are loaded onto the computer as they are written in the descriptions downloaded from the web.
Example in Directory format:
Artist Album Song Name
Queen - Innuendo - 08 These Are The Days Of Our Lives
This works fine in Mac iTunes or Windows Media Player. However, if I'm using iTunes in Windows, it may give me the following,
Artist Album Song Name
Queen - Innuendo - 08 These Are The Days O
Now, that is just an example and not a song that is affected, but it gives you an idea of what happens. It appears to happen on any Album and File Name combinations, and only appears to happen when using iTunes in Windows. The much longer filename and album names seem to be far more affected and I think this is to do with Windows Naming structure, but it doesn't explain why it's not happening in Windows Media Player??
The problem with this, is that when trying to use the same File Directory stored on my external Networked HDD for both Apple and Windows iTunes, the Windows version is causing havoc by doing what it wants where as the Apple iTunes seems to work as intended.
So when it comes to using either to rip a new CD to the library, I have to start using the Mac Mini each time because it seems to not be causing any issues when ripping discs.
I'm still in the process of sorting out my Album Directory and having to load everything up on the iMac so that everything gets loaded properly, but this seems to be a really bad bug in iTunes.
The reason I want to use this external NAS HDD is to keep my data in one area as opposed to having two large directories for both machine formats.
I hope that is a little more clear on what is happening.
P.S. Just to add to this. I prefer to use the PC for CD Ripping because the CD Drive is much faster than my Mac Mini and doesn't get anywhere near as hot when used constantly. I can rip 20 albums or more on my PC in the time it takes to sometimes rip just 5 to 10 on my Mac Mini, which is why I wanted this to work properly on the Windows version of iTunes.
Message was edited by: Capeview

Home Folders Not being Created Correctly

I'm having some sort of major issue with my directory and/or afp setup.
I'm trying to create new users and the home folder won't be created at all. If I change the permissions (give write access to the user's group) on the root of the share that hosts the home folders it will create one but it is mangled. The home folder only conatins a Library and Desktop Folder. Documents, Movies, Music, Pictures, Public, and Sites are missing. Also the permissions on this newly created home are mangled being 700 instead of 755.
All Existing Users are functioning okay but creating new home folders is broken. It has been a while since I've needed to create new users. I'm worried it may be hard to isolate the cause and effect. I have done software updates 10.4.6 and now 10.4.7. Also I changed this machine to handle local DNS.
Any Ideas?
XServe G4 1.0 Single 500GB Mirrored RAID on Internal Drives 10.4.7 Server

We also have this problem, and before I go and re-edit the home folder entries for each of our 600-odd users, I'd appreciate if you could confirm that this solution is going to work for me...
Troubleshooting another problem, we applied the x.4.6 update about the same time as the Network Mounts were turned off then a restart and turned back on again. A bad combination.
Faced with a Monday morning "None of the students can log in" crisis ("you are unable to log in to the user account "username" at this time..."), and thinking that the problem had been caused by my turning the network mounts off, I discovered that student mount points now show (in WM's Home tab) as "afp://10.224.96.2/Students" where they used to be "afp://mainserver.westlandhigh.school.nz/Students".
The easy fix to the problem (not knowing about artnum 303697 at that point) was to reassign the home folders to the 10.224.96.2 home. (when you don't know what to do, you do what you know how to do). This got the users happily working again, although there were all sorts of strange problems relating to disk quotas that some users had to work through.
a few days later the log entries about DNS were noted, artnum 303697 applied, and changeip fixed those things. hostname responds correctly as mainserver.westlandhigh.school.nz. Everything ran reasonably well for the next couple of months, although the AFP/CPU hogging problem mysteriously appeared...
x.4.7 seems to have solved the AFP/CPU hogging, but now we've discovered a problem creating home folders for new users.
Tim's fix on 3rd August shed some light... An interesting quirk of using Presets is that we still have a Student preset that puts the FQDN name in the home folders list. So we can leave the FQDN home folder selected, click Create Home Now, and on Save, the folder is created. But the student can't login: "you are unable to log in to..."
Change the mount point to the IP number, Save, and it almost works - the system tells the user they are already logged in to another computer... Selecting Allow simultaneous login from Advanced solves this problem, but leaves the system open for the student to attempt to log in twice, with the potential for havoc there. It's also not a wonderful work around as the other staff who sometimes enter new users are likely to miss one or more of the extra steps...
I guess that I'm going to have to turn Network Mounts off in Sharing, and then turn them on again to get the right set of mount points showing in Accounts/Home, and then work my way back through all the students and point them back to the FQDN mountpoint again?
Is it likely to be worth the pain? Will it cause some other problem to arise? Is there an easier way?
G4 DP 1.25 Mac OS X (10.4.7)
G4 DP 1.25

Tlanes not being created for all locations for one product

Hello Experts - I need some advice on the following situation:
We have a set of products where tlanes are only being created for 3 locations out of many. What would cause the tlanes to not be generated for all locations if all master data elements are present? We have a valid inforec, mrp views, etc. I can't see anything different with the 3 locations that are working correctly.
Any help would be much appreciated.
Thanks!

Thank you for your resopnse:
To answer your questions, yes, we have done all of these things and the tlanes are still not being created. We have been using SPP for 6 months and this is the first time we've seen this problem. Do you have any other suggestions or is there any more information I can provide you that would be helpful in solving.
Thanks in advance for your advice.
AAF1999

XMP files not being created with DNGs...

I'm used to using Bridge with ACR to process Nikon NEFs. But a recent camera update has me experimenting with converting the D3's NEFs to DNG files and editing them with CS2 and Bridge 1.04 which works better on my system. I've also experimented with CS3 and Bridge 2.1.1.9 with the same DNG files.
In both cases XMP files are not being created when working with DNG files. I have enabled "Save image settings in : Sidecar ".xmp" files" turned ON. But they do not seem to be generated and I assume the ACR adjustments are being embedded in the DNG file. Meanwhile doing edits on NEF files continues to create .xmp files as expected.
I find .xmp files to be very useful and I'm wondering why they're missing with DNG files? Are they hiding somewhere other than in the same folder that the images reside in?
Thanks.
Russell

> The information contained in the XMP file is stored in the DNG file so there is no need for a separate file.
Aww, yuck!! That's a real drag...
When editing lots of files (yesterday's shoot produced 8GB) I back everything up to off-line storage and then, after doing all my edits and crops in ACR, I only have to copy over the small XMP files which takes no time at all.
So if I re-edit the DNG with ACR I have to re-copy ALL the files again to the off-line storage.
I used to sometimes even save 2 versions of the xmp files when I needed 2 different crops of the same images, such as doing a wide screen 'cinema' crop for a corporate client's Intranet presentation of their event, as well as more standard crops to be used for their newsletters.
Guess I won't be using DNG any more..
Thanks for the help Kees :-)
Russell

[svn] 1978: Bug: vendors. properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly .

Revision: 1978
Author: [email protected]
Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
Log Message:
Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
Doc: No
Modified Paths:
blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

I have a lot of grief with this version of Windows Media Player.
It is very buggy and frustrating to use.
I have my Music library on a QNAP NAS, which is as reliable as they come.
System notifications make it not save changes. It also does not do a good job of interpreting albums and artists from folders. Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
or date. It separates and merges albums/tracks without sense or reason. Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes. Often it has not.
This is the first time I've used WMP in this capacity, and I do not recommend it.
New service pack please.

IOR files not being created

I'm currently experimenting with using the InDesignServerService (windows service) as our means of starting and managing instances of InDesign Server.
I seem to have it working for the most part but the IOR files are not being created and I cannot figure out why. I have been messing around with the command line arguments in the InDesignServerService MMC for quite some time with no luck. The instances seem to startup fine and show "running" in the event viewer info message.
Command line arguments used -
-pluginpath Server/Corba -iorfile c:\IDSQueues\Default\ior1.txt -previews
I've made sure the account the service is running under has writes access to the ior file path. I truely don't know what else to try or why this is happening.
Any help would be great! thanks!
FYI
Using InDesign Developer Server CS5 (for testing) on Windows 7 64bit.

Thanks for the response.
However, this will not work because I am using InDesignServerService to startup the instances. With the service, there is a field to specify a port number in so you do not include it in the command line.
Also, I have tried specifying this in the Command Line argument as well -
InDesignServer -pluginpath Server\Corba -iorfile c:\IDSQueues\Default\ior1.txt -previews
InDesignServer.com -pluginpath Server\Corba -iorfile c:\IDSQueues\Default\ior1.txt -previews
I've also tried
InDesignServer -iorfile c:\ior.txt -pluginpath Server\Corba
which is what the Intro to InDesign Server PDF says to use and it does not work.
I have tried many variations and nothing works. The IOR file is still not created.
I'm still trying to solve this, any help would be great!
Thanks,

User Profile Disk not being created

Hi,
I created a new 2012 VDI collection. Things seems to be working fine except for the User Profile Disks are not being created. From my understanding a .vhdx prefixed with the user's SID is supposed to be created when the user logs into one of the virtual
machines from the collection. I can see that a UVHD-template.vhdx" was created correctly but when logging on to one of the deployed virtual machines from the pool there is no other .vhdx files (except the template).
From what I've read the virtualization hosts must have write access to the share (they do). I can't seem to find any other requirements. I've searched through event viewer and found nothing. I'm not sure which logs to check on which server.
Anyone have any ideas what I'm missing?

Hi,
Thanks for your post in Windows Server Forum.
Kindly follow the below mention article and check the necessary steps for creating UPD, try to create new UPD.
1. Working with User Profile Disks on Session-Based Desktop Deployments
2. Easier User Data Management with User Profile Disks in Windows Server 2012
Hope it helps!
Thanks,
Dharmesh

Windows 8 Last Access Time Stamps not working

Hi I have been trying to fix a issue with last access time stamps not working when I open a file
so will have time on created modified and accessed from when created but some are wrong like one file
saying
created ‎Sunday, ‎September ‎14, ‎2014, ‏‎5:19:32 AM
modified ‎Sunday, ‎September ‎14, ‎2014, ‏‎5:19:32 AM
accessed Sunday, ‎September ‎14, ‎2014, ‏‎5:19:32 AM
I'm not sure what can cause this please help thank you

Hi whowhatwere,
Are you only confused about the last access time not change when you open a file?
If you want to know more details about modified and created time, we can refer to the following KB.
http://support.microsoft.com/kb/299648/en-us
About the accessed time, please refer to the following blog.
How do I access a file without updating its last-access time?
http://blogs.msdn.com/b/oldnewthing/archive/2011/10/10/10222560.aspx
The blog mentioned that: In fact, the intuitive definition of access is more specific: It's "the last time I opened, modified, printed, or otherwise performed some sort of purposeful action on the file."
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Why is my billing information not being review correctly...like it sayes my apple id has not yet been used in the itune store and it tells me to review my account info but for some reason it doesnt work

why is my billing information not being review correctly...like it sayes my apple id has not yet been used in the itune store and it tells me to review my account info but for some reason it doesnt work

Hi there ethangabe,
You may find the information in the article below helpful.
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
http://support.apple.com/kb/ht2589
-Griff W.

Item Texts Is Not Being Created in BAPI_BILLINGDOC_CREATEMULTIPLE

Hi.
I am Using Bapi TO Create Invoice, Every thing is created successfully , but item text is not being created. Code is as below.
DATA: s_vbap TYPE vbap,
            t_billing TYPE STANDARD TABLE OF bapivbrk WITH HEADER LINE,
            t_datain TYPE STANDARD TABLE OF bapikomfktx WITH HEADER LINE,
            t_return TYPE STANDARD TABLE OF bapireturn1 WITH HEADER LINE,
            t_success TYPE STANDARD TABLE OF bapivbrksuccess WITH HEADER LINE.
      SELECT SINGLE * FROM likp
      WHERE vbeln = v_del_doc_no.
      SELECT SINGLE * FROM lips WHERE
      vbeln = v_del_doc_no.
      t_billing-salesorg = likp-vkorg.
      t_billing-ref_doc = likp-vbeln.
      t_billing-ref_item = lips-posnr.
      t_billing-doc_number = v_del_doc_no.
      t_billing-itm_number = lips-posnr.
*      SELECT SINGLE fkarv FROM tvak
*            INTO t_billing-ordbilltyp
*            WHERE auart EQ zsoa_so_header-auart.
      SELECT SINGLE auart FROM vbak
                  INTO t_billing-ordbilltyp
                  WHERE vbeln EQ order_num.
      t_billing-price_date = sy-datum.
      t_billing-ref_doc_ca = likp-vbtyp.
      t_billing-material = lips-matnr.
      t_billing-plant = lips-werks.
      APPEND t_billing.
      BREAK-POINT.
      CLEAR: t_datain.
     t_datain-ref_doc = v_del_doc_no.
      t_datain-ref_item = '000010'.
      t_datain-applobject = 'VBBP'.
      t_datain-text_id    = '0001'.
      t_datain-langu      = sy-langu.
      t_datain-format_col = '*'.
      t_datain-text_line = 'FSG 2829'.
      APPEND t_datain.
      CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
        TABLES
          billingdatain = t_billing
          textdatain    = t_datain
          return        = t_return
          success       = t_success.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
      LOOP AT t_return.
        itab_msg-type = t_return-type.
        itab_msg-msg = t_return-message.
        APPEND itab_msg.
        CLEAR itab_msg.
      ENDLOOP.
      READ TABLE t_success INDEX 1.
      p_i_bill_doc = t_success-bill_doc.
    ENDIF.
ENDIF.
CLEAR: itab_so_items, itab_so_items[] , delivery_no , itab_return[].
So Text FSG 2829 is not being created in Item Text.....

Hi Tahir,
You can check with the below thread
A question of BAPI_BILLINGDOC_CREATEMULTIPLE
Regards,
Pawan

Group Folders not being created

Hi folks,
i think this is a simple question: i got Mac OS X 10.4.4 Server with OD and Mobile Homes configured. I set up some custom Groups but the Group Folders are not being created automatically. I think there is a terminal command to do this. Does anyone know that command?
Greets

Is it the CreateGroupFolder command?
(15297)

PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre. It was working fine until today HELP!

PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre. It was working fine until today HELP!

What is your operating system? Reader version? Are these local or online PDFs? If online, in what browser?
Can you post a screenshot: https://forums.adobe.com/thread/1070933

Inbox folders not being created from msf files

Last week, I noticed that my Inbox folder files weren't appearing in my profile. I posted a generalized question here: https://support.mozilla.org/en-US/questions/996903
The response I received didn't help that much. The folder I created appeared on the remote mailbox as empty folders.
My mail account is synced via IMAP to a remote Zimbra mail client using STARTTLS. I can view my Inbox. The other folders in my Inbox account are not visible. I can send and recieve messages from my INBOX.
When I select "Manage folder Subscriptions" In the account options, I can see the folders. When I select them, and click the "Subscribe" button, nothing happens.
Inspecting my IMAP directory, I see the following structure:
~/.thunderbird/13zr0oo0.default/ImapMail/mail.<zimbra_account>.com:
-rw-r--r-- 1 matthewe matthewe 1238 May 2 10:38 Archives.msf
-rw-r--r-- 1 matthewe matthewe 1235 May 2 10:38 Drafts.msf
-rw------- 1 matthewe matthewe 47500385 May 2 09:56 INBOX
-rw-r--r-- 1 matthewe matthewe 375885 May 2 10:36 INBOX.msf
-rw-r--r-- 1 matthewe matthewe 25 May 2 08:58 msgFilterRules.dat
-rw-r--r-- 1 matthewe matthewe 1233 May 2 10:38 Sent.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 10:38 site-errors.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 09:59 Templates.msf
-rw-r--r-- 1 matthewe matthewe 2275 May 2 10:33 Trash.msf
The msf files are created when I click the "Subscribe" button but subsequent Mail files containing the mail data are not (note that non-msf files exist only for "INBOX".)
Removing .msf files and restarting Thunderbird has no affect.
When I launch, the errors console reports the following three errors:
"Could not read chrome manifest 'file:///usr/lib/thunderbird/extensions/%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D/chrome.manifest'.
-- There is no chrome.manifest file in my filesystem under /usr/lib/thunderbird/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}"
"While creating services from category 'profile-after-change', could not create service for entry 'Disk Space Watcher Service', contract ID '@mozilla.org/toolkit/disk-space-watcher;1'"
This is reported as https://bugzilla.mozilla.org/show_bug.cgi?id=883621 and has been resolved at https://bugzilla.mozilla.org/show_bug.cgi?id=895964 but my system still throws the error. (I have plenty of disk space. Permissions perhaps?)
[JavaScript Warning: "Calendar https://mail.zimbrahostedemail.com/home/matthewe@<zimbra_client>.com/Calendar has a dangling E-Mail identity configured."]
I'm not sure what that means.
I am using Thunderbird 24.5.0 on Ubuntu 13.10

Is your question about files not being created, or because you cannot send and receive mail, or both?

Time stamps not linear

Hi,
I have a DAQ USB-6251 driven by labview.
The time stamps on the text file have backward and forward jumps in them. See attached for picture.
They increase linearly for about 12000 samples, then jump backwards
about a 3 sec, linearly increase for about 1000, then jump forward
about 6 seconds. This cycle then repeats ie increasing nice and
linearly for about 12000 samples, jumping back etc.
I suspect there is a buffer somewhere which fills up and then acts strangly when trying to reset.
Any explanations? Any solutions?
Here's some further info about my setup:
Producer loop:
I generate a continuous analog output signal which I feed back into one of analog input pins which I also continuously acquire.
The generation and acquisition both have sample rates of 4096
samples/sec and 1024 samples are set to acquire/generate per loop.
The recorded input is enqueued.
Consumer loop:
Dequeues data and write to text file.
Regards,
Jamie
Using Labview version 8.0
Attachments:
time stamps not linear.jpg ‏17 KB

Ben,
Maybe this is a good chance for me to learn (be convinced of) something then. I'd try this out for myself on hw, but I've got tests running now.
Let's suppose I have both an AI and an AO task, both set up to start off the same sample clock. However, the AO outputs on the leading edge of a clock while the AI samples on the trailing edge of the clock. Let's further stipulate that the clock is generated by an on-board counter at 5 kHz with 90% duty cycle. So the AO update occurs 180 microseconds before the AI. How do waveforms handle this offset in t0? Will t0 simply be set to 0 because of the use of an "external" sampling clock? Or will the two t0 values be equal and non-zero? Or will they be sometimes equal and sometimes different, depending on the "phase" of the system clock -- either the 1 msec one or the 16 msec one used for system timestamps?
Now, concerning triggering: Does t0 represent the time of the trigger? Or of the first sample / output *after* the trigger? Or is it the time you call DAQmx Start prior to receiving a trigger signal?
Other concern: even when not *strictly* necessary, I try to make a habit of making code that runs pretty efficiently, unless that puts an undue burden on development / maintenance effort. My experience with processing large arrays vs. processing clusters containing large arrays has suggested that pure arrays are typically significantly more efficient to manage. (I'm sure it depends on sizes and kinds of processing too.) Aren't waveforms essentially cluster-like?
Well, enough of the blah, blah, blah. I really *am* interested. I know many of the analysis functions prefer (if not require) waveform inputs rather than raw arrays these days, so there are some clear code simplicity advantages to waveforms IF I can be convinced that I'm fully informed of the downsides and gotchas. (Another example of worry: when integrating a waveform, how does the floating point roundoff accumulate from the 'dt' value? Will results late in a long array contain more cumulative roundoff error?)
-Kevin P.

Time Stamp not being created correctly

Similar Messages

Maybe you are looking for