Time stamp of entry change?

Is there any way to do an LDAP query and return those directory entries that have changed since a particular point in time?

Search filter of "(modifyTimestamp>=yyyymmddhhmmssZ)"
where yymmdd is year, month, and date like "20050419"
and hhmmss is hours, minutes, seconds like "143105"

Similar Messages

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

Remove time stamp in track changes bubble

Is there any way to remove the time stamp from the Track Changes bubble? I can't seem to find a way to do it. Maybe it just can't be done?

It seems that time_stamping the changes is a logical feature.
As far as I know, we can't disable it.
Yvan KOENIG (from FRANCE mardi 21 avril 2009 19:54:53)

*.eml Time Stamp - Select File in Windows Explorer Changes the Modified Date

The Windows Live Mail *.eml files time stamp is getting changed to the current date when the file is selected in the Windows Explorer! I save backup copies of important E-mails to folders on the Hard Drive and then synchronize them with the same folders on other LAN Hard Drives for backup archives. When these E-mail files are selected or opened from the Windows Explorer in the Windows 7 OPS the Modified Date Time Stamp is changed to the current date automatically! This action creates a real problem when doing later synchronizations of all of the folders! The date will not be the original date of the E-mail and the original file will be over copied with the file with the newest date stamp. I stopped Indexing on the *.eml files and that stopped the time stamp change when overcopy synchronization, but if the file is selected during a viewing in Windows Explorer then the Time Stamp is updated to the current date again! A solution to this problem would be greatly appreciated if anybody knows of one. Thanks - - - Shorto

The Date and Timestamp changing issue in Windows 7 has a two part fix!
1. Disable the Indexing of the *.eml file type in the Indexing Options located by Clicking on "Control Panel" - "Indexing Options" - Advanced Button - File Types Tab - scroll down to the .eml file type and uncheck the Box then click OK to finish, so
that the Email type of files won't be Indexed.
2. Delete the Registry Entry listed below, be sure to Export and Save the original Key so it could be Restored if something goes wrong! \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\PropertySystem\PropertyHandlers
and Delete the .eml entry
That should fix the problem with the changing Date/Timestamp of Email Files. For more information read CarlS's WindowsSeven Fourm thread where I also have more input:
http://www.sevenforums.com/browsers-mail/35334-eml-files-timestamps-updated-constantly.html
This should give you a better understanding on the problem and the Fix. - - - Shorto

CDHDR table entry updation with different Time Stamp

Hi Experts,
I'm changing the Contract Partner First Name. The time stamp updation in Change Document Object DEBI is with UTC but the BUPA_BUP Object with Local Time Stamp.
We want both time stamp with the UTC.
Time Zone mentioned at SPRO level is UTC.
Have anyone faced such situation earlier?
Thanks and Regards,
Jyoti Shankar

Jyothi,
I'm not sure whether this answers your query or not but suggest you to look at these 2 FMs'
BUS_CUA_VARI_FUNCTION_CONVERT
BUS_LOCATOR_OKCODE
Ist FM uses table TBZ4 that uses GUI.
Probably this is the reason you view object BUPA_BUP in the table with GUI time.
Rgds
Rajendra

SMQS: when is time stamp in the "last change by" changed?

Dear Gurus,
Recently we are encountering issues in our OUTBOUND queue of ECC. In a certain time queues pile-up to almost 2K and are in status READY.
*Integration is ECC <-> APO
To understand if its a QRFC issue or a Overloaded WorkProcesses, we need to isolate each case.
First we assumed that the reason of having the READY status are:
1. due to the change in TYPE of the queue name (APO system) from R to U or vice versa
2. due to the change in STATUS of the queue name
What we would like to know is, what does the time stamp consider upon updating?
Are those assumptions above correct?
Also the User ID seems not being updated.
I asked the user indicated in the "last change by" if he did some change, but responded that he is not performing any change in the QRFC for the past few days. But it shows his name and current time stamp.
thanks and regards!
Zeek

Dear Babu, really appreciate your response on this.
Unfortunately, when i look into SMQS the APO system queue was already set to R. Upon checking the "last change by" (double clicking on the TYPE) i see that the time stamp was at current date and time.
And the only thing that can help us catch who/what is the cuplrit (user/background process), is to understand what are the factors that the time stamp in "last change by" considers. Also the user indicated in it, was saying he hasn't performed any changes that day... What bothers us is that it might be a background process as the time stamp keeps changing every time... Usually, for what i noticed, the time stamp there only register the date and time when our system had the support pack updated. but recently, it is showing that its been changing every day.
Moreover, our basis folk just assumes that the time stamp considers both the update in TYPE and as well as the change in STATUS. He is saying that the change in activity (when ECC transfers data to APO) is the reason behind the change in time stamp. For us to prove it, we checked on /SAPAPO/CC and saw that the last update of CIF/Any changes in ECC is similar to the one in SMQS last change, so it is not a valid reason, though the time is quite near what SMQS says.
So what we need to understand is that, was it really the CIF/any updates in Orders going to APO does trigger the time stamp change in SMQS "last change by"?
thanks!
Zeek

Time stamp changes

When I copy my photos from my camera to my computer, the time stamp on them change. The actual time I created the photo becomes the photo's "date modified" property and the actual time I copied the files to my computer becomes the file's "Date Created" property. I don't like this. How do I get the actual date created property to copy over correctly?

In Started Workflow screen...
just click on any one of the activity on the workflow log..
In Menu option click goto->technical workitem display
Then again in menu optios click edit--> change
Now you can change the container value.
Edited by: Swaminathan PJ on Nov 19, 2009 2:21 PM

Time Stamp not affected by change of calculated fields.

Dear Experts,
We have several calculated fields that are depended on values of lookup records or the system-time.
I experienced during recalculation that when the calculated field changes the Time Stamp did NOT change. This change did also NOT trigger the workflow with Trigger Action: Record Update. AND the record is not Syndicated because the syndication map has Suppress Unchanged Records.
Has anyone an idea how to solve this?
Kind regards,
Job Jansen

Dear Kanstantsin,
I don't know what you mean by "simple field" but I have 2 calculated fields one is Text and the other is Boolean. In both cases the Time Stamp is not updated during recalculation.
Of course both fields are selected fields in the Time Stamp field.
Kind Regards,
Job Jansen

Insertion balloons with time stamp in Word 2013

Does anyone know how to turn these off? They appear when the cursor is over an insertion. I do not want customers tracking my time.
Thanks

Did you mean you want to Eliminate time stamp in Track Changes, check the following steps:
1. Click the File tab.
2. Click Options.
3. Click Trust Center.
4. Under Microsoft Word Trust Center, click Trust Center Settings...
5. Click Privacy Options
6. Under Document-specific settings, uncheck Remove personal information from file properties on save.
7. Click OK twice.
If I have misunderstood what you meant, please feel free to tell us.
Tylor Wang
TechNet Community Support

Time Stamp Mechanism in BW - FI

Hi,
Is there a 'How to' or any other document that explains the 'Time Stamp Mechanism' for Changed FI Documents?
I have heard that a table: BWOM2_TIMEST is used in this process but I am not sure about the exact functionlity.
Can anyone please guide me appropriately or direct to some document that explains this?
Thanks and hoping for a quick reply.
Regards,
Joy.

Hi Joy,
in service.sap.com/bi under InfoIndex / Extraction you can find a good ppt about FI Extraction ( Data Extraction (Line Item Level) FI/CO).
Also under Know How Network you can find an OLD Web Conference about FI AP-AR Line Item Extractors (0FI_A*_3)
Hope it helps
GFV

How to get the Time Stamp if we use User Status

Hi Gurus,
We used User Status to control several Orders. Now we are required to get the "time stamp" when we change from one status to another, is that information available in the system?
If not, how do we get the time when a user status is changed from one to another?
please advice,

Hi,
To check such kind of changes you have to follow below path,
Go to Status tab (Blue Ikon) --- >Extra -> Change Documents-> All- --- > Choose All Changes
SAP note 390635 provide the possibility to write change records for process and production orders as modification.
please refer this link also,
[Link|https://www.sdn.sap.com/irj/sdn/profile?userid=3781605]
Regards,
R.Brahmankar

FileMonitor issue for date time stamp change.

Hi I have an app that runs with a minor issue and I am looking for some insight for a workaround or code change.
I have a File Monitor that checks a specific directory every second.
Users send a batch run to this directory throughout the day. There are two types of files, .ZIPs and .DONEs.
So for each .ZIP a .DONE is sent to notify the app it can begin to process the file.
Here is what I receive
/elements/process/File1.ZIP     Oct 15 08:19
/elements/process/File1.DONE     Oct 15 08:19
The problem I am encountering is sometimes the .DONE and. ZIP are sent and the date time stamp of both files are the same so when the monitor reads the directory it looks like there is no change so both files sit in the directory and do not process. To make this work, I usually go in and touch a file to change the date time stamp.
This is a java app that runs on an AIX box.
Here is my code, is there anything any once can suggest to help me out. Thanks in advance.
   * Subclass of FileMonitor, Handles the timer event
   * @param none
private class FileMonitorNotifier extends TimerTask
    public void run()
      // Loop over the registered files and see which have changed.
      // Uses the Modifed DateTimeStamp to determine if there was a change.
      // Use a copy of the list in case listener wants to alter the
      // list within its fileChanged method.
        try
            Collection files = new ArrayList (hmFiles.keySet());
            for (Iterator i = files.iterator(); i.hasNext(); )
                File file = (File) i.next();
                long lastModifiedTime = ((Long) hmFiles.get (file)).longValue();
                long newModifiedTime = file.exists() ? file.lastModified() : -1;
                //      Check if file has changed
                if (newModifiedTime != lastModifiedTime)
                    //      Register new modified time
                    hmFiles.put(file, new Long (newModifiedTime));
                    // Notify listeners
                    for (Iterator j = colListeners.iterator(); j.hasNext(); )
                        WeakReference reference = (WeakReference) j.next();
                        FileListener listener = (FileListener) reference.get();
                        // Remove from list if the back-end object has been GC'd
                        if (listener == null)
                            j.remove();
                        else
                            listener.fileChanged (file);
        catch(Exception ex)
             m_odLaunch.logError(OdIntegrationConstants.ERROR_LEVEL_MIDLEVEL, ex);
     }

Yes, I guess you are right, I don't care what time each file came, as long as I have both I can being to unzip and process and delete the .DONE.
The code itself was based on if a filechanged then do work.... I could just take this out. Thanks!
* This is the main entry point when there is a change to the modified date/time
* of the monitor directory
* @param file directory we are monitoring
     public void fileChanged (File file)
          StringBuffer sbMessage;
          try
               sbMessage = new StringBuffer();
               //Make sure this is a Directory
               if(file.isDirectory())
                    //Return list of files with extension we are looking for
                    File[] arFiles = file.listFiles((FilenameFilter)new FileSuffixMonitor(m_odLauncher));
                    for(int i=0;i < arFiles.length;i++)
                         sbMessage.append("Found file association to move-" );
                         sbMessage.append(arFiles.toString());
                         m_odLauncher.logInstance(sbMessage.toString());
                         processMoveFile(arFiles[i]);
          catch(Exception ex)
          sbMessage = null;

Changing time stamp format in the file receiver adapter file name

Hi all,
How can we change the standard date time stamp from
filename_yyyymmdd-hhmmss-mil
to
filename_yymmdd_hhmmss
i.e., I want "underscores" instead of "hyphens" and also I do not want the MilliSeconds.
I read in the forums that I have to use the combination of variable substitution and mapping functions to do this, but not sure how exactly.
Can the experts help me with this please?
Many thanks.

Hello Ramesh,
     You can make this possible using runtime filename creation using UDF.
Please go though the below steps.
Message mapping:
Create an UDF and include the piece of code that captures the Filename and Timestamp from source side via ASMA.
Modify them according to our requirement by adding the <Timestamp> at the end of <filename> with _.
Map the UDF to any of the top level node so that the modified filename will be available for the target communication channel
UDF Code is:
try {
String filename    = "";
String timestamp = "";
DynamicConfiguration conf1 = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create( "http:/"+"/sap.com/xi/XI/System/File","FileName");
DynamicConfigurationKey key2 = DynamicConfigurationKey.create( "http:/"+"/sap.com/xi/XI/System/File","SourceFileTimestamp");
filename = conf1.get(key1);
timestamp = conf1.get(key2);
filename = filenametimestamp".xml";
filename = filename.replaceAll( "-" ,"_" );
conf1.put(key1,filename);
return filename;
catch(Exception e)
     String exception = e.toString();
      return exception;
Click on Advanced tab and check the Option u201CSetAdapterSpecificMessageAttributesu201D in addition to that check the attribute that are required to be captured during run time. In our case File Name and Source File Time Stamp are required to be checked
In the receiver communication channel Mention u2018 * u2018as File Name Scheme.
Click on Advanced tab and check the Option u201CSetAdapterSpecificMessageAttributesu201D in addition to that check the attribute u201CFile Nameu201D which will carry the modified value in the UDF .
i hope this will help you.
Monica

I have a psts on my mac and the time stamp hasnt changed since i added this to the mac even though they have been imported?

i have a psts on my mac and the time stamp hasnt changed since i added this to the mac even though they have been imported?
where is the data stored when i moves messages to the imported pst?
after serval months of rebuidling and creating new identites for Outlook for mac2010 any reasons why this is constantly happening?

I am not sure what you mean by this.
is it ok to delete outlook ID's copy/backup as running out of space?
If you mean you have several identities in the Office Identities folder then yes. You can delete whatever you don need\want except for your current.
Are you updated to the latest version of Office?
After the restore, navigate to ~/Documents/Microsoft User Data/Office 2011 Identities/your identity and delete the file called Database. Then rebuild.
This may help:
http://www.officeformachelp.com/outlook/troubleshoot/

Need to add date/time stamp to file name without time change creating new files

We have setup our application to save data once a trigger event occurs. We also need the date/time stamp as part of the file name. We used Format Date/Time String and concatenated it into the file name. It all works good, but as the time changes (seconds, minutes, etc.) it causes the Write to File to create a new file with the new filename. Is there a way to create the file and save/latch/buffer the time in the file name so that it doesn't create a new file for every second?
I've attached a shot of the relevant part of our VI. It's all in a big while loop. The data save is in a case/switch so that when it is triggered it starts saving. (The for loop is to split the data up
into 4 different files). Like I said, it all works except new files are created every second as the time changes instead of just putting it all in one file with the initial time in the file name.
Attachments:
TimeInFileNameQuestion.jpg ‏46 KB

I need a loop in order to use a shift register. I cannot stop the outer while loop (because it would stop the hardware from collecting data), and I cannot add loops inside which bogs down the processor to where the app stops. I've attached a simpler version of my VI which illustrates the problem. While the button is pressed (the trigger) it should save the data (in this case just cycle numbers) into one file with the initial date/time. But, you can see that it creates 1 file/second. I tried using shift registers, but without adding extra loops I can't see how to do it. Thanks
Attachments:
FileNameTest.vi ‏29 KB

Time stamp of entry change?

Similar Messages

Maybe you are looking for