Time stamp, progress play bar missing from player

For some reason, the time stamps and play bar are missing
from my videos when I view them online, though they are there when
I view locally.
Rather, I should say they work intermittently.
Link
to site
Any ideas?
Here's a copy of my .fla
Also, if there's a better way to view the videos, perhaps
some sort of preloader, I'm all ears!
I'm running Mac, Flash CS3.
thanks much!

It's still very intermittent for me, and more importantly, my
client. I'm totally stumped. One page I've never gotten the
progress bar and time to show up.
This page never shows
the bar/time
Does anyone see anything in the code that looks like it would
be causing the conflict?
Any ideas would be greatly appreciated.

Similar Messages

Every time that I play a tune from my itunes the file duplicates itself into my 'MyDocuments' folder. If I delete this the song is erased from itunes totally. Ideas??

Everything worked fine for the last two years but now every time that I play a tune from my itunes the file duplicates itself into my 'MyDocuments' folder. If I delete this the song is erased from itunes totally. Ideas??

You are of course deleting the tunes from within the iTunes interface.
The settings that I am referring to are your device settings for the iPad. It should show in the left column of iTunes when your iPad is plugged in.
Go through your playlists and make sure that the tunes(s) are removed from any playlist. You can prevent the sync as noted above then do a sync and the iPad should update with the content from you Mac.
MJ

Time Stamp Error while extracting data from R/3

Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba Rao

Hi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu

Time and Date - Clock Widget missing from home scr...

What is the solution for missing clock widget from home screen after Anna update from Nokia Care !!!
Reinstalled from Nokia Suite, still clock missing - any solution.

Depress your home screen and wait for the 'Edit' menu to appear, tap an empty widget box (Plus sign) to open your widget catalogue, scroll down to the bottom of the catalogue and select a widget called Time and Profile, this should do it...... Unless if it's missing from the catalogue itself.
N8-00,Galaxy Tab 10.1

Quick Time will not play HD movies from itunes

When i'm on the road with my computer I like to be able to play my HD movies without having to open Itunes. So i use Quick Time. But with the HD movies I buy from Itunes this does not work. When I try and play the HD movies on Quick Time, the movie acts like it's playing but the screen is gray. The bar on the bottom displaying the time for the movie is going, but there is no video or audio.
Is this a problem with authorization or something?

I have the same problem,i have sync it to my computer and there is no problem to see it but on my iphone 4s can't find it,please help or I just never gonna buy movies from Itunes,i mean why is itunes so difficult to use?

Side bar missing from iTunes after the update o oct '14

Please let me kow if there is side bar option in Itunes after the update.

It's not missing. It's no longer used as you remember it. But there is no loss of functionality if you take some time to work with iTunes.

Airport/connection bar missing from top of screen

apologies if this is being posted in the wrong area.
I have noticed that the icon showing my internet connection from the top right hand side of the screen is missing, any idea how i get this back?
Thanks.

Hi
Goto sys prefs/network/airport/airport tab and tick "show airport status in menu bar".
Tony

I have to find a time stamp for a website visited from an earlier version of an Iphone, how do i do this?

basically someone has an old iphone and there was inappropiate websites visited on the phone and i was blamed for it.
I want to know how to find out the exact time and date these were visited and how they were accessed. and to clear my name as they were instead of looking at how this could have happened, they said i hacked into the phone and used it, when i didnt even know they had thier phone in my house at the time.
thanks for any answers or help.

I have managed to find the solution to this problem in another thread. I have copied the response from that thread below.
The solution that worked was to navigate to the preferences file and delete the plist file as described below.
Peter Bannon
RE: My iphoto Library is Empty ?????
Sep 12, 2005 1:13 PM (in response to Nic Hard)
Nic Here are some of the standard fixes I think may help in your case: 4. Your iPhoto preferences file may be corrupted.
(MAKE SURE you QUIT iPhoto first)
You will find it in your Home directory:
(Home/your account) >Library>Preferences>com.apple.iPhoto.plist Remove or trash the preference (.plist file) and restart iPhoto. If it still doesn't work go on to these remedies, in order. 5. Bad Album data?
Old Toad says:
1 - move the Albums folder and the AlbumData.xml file to the desktop.
2 - launch iPhoto. It if launches successfully you probably have a corrupt album. To locate the bad "apple", pun intended, do the following: 1 - move one of the individual album folders and it's associated data file into the new Albums folder that was created in the iPhoto Library folder.
2 - launch iPhoto. If it's successful do the same with the next album folder and data file. If iPhoto doesn't launch successfully, that's a bad one and remove it and the data file.
3 - repeat for each individual album folder in the old Albums folder. 6. Rebuild Library
QUIT IPHOTO FIRST
Relaunch while holding down the key combination below for your version
Option+Shift IPHOTO 2
CommandOptionShift IPHOTO 4
Command+Option IPHOTO 5

Bar missing from mail so can't write or reply to emails

Hi
Updated iPhone 4S the other day and am not sure if it is coincidence but in mail, the bar at the bottom of the screen that allows you to create, reply to emails etc has vanished. Able to receive emails but can't reply or forward!
Using a hotmail account which I deleted from phone and reinstalled but still no joy.
Suggestions??????
Many thanks

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

Zen vision m cant play or transfer from player to

when i connect my player to my pc i can go into it and see the songs but cant play or copy the song to my pc, i have done it before on my friends pc with no problem why cant i do it on mine!?

Sounds like you both need to report it as a bug. In my experience bugs mentioned here don't tend to get fixed.
Go to the support section under contact, and file a report there of the bug.
That way a ticket will get made and put in the system and sooner (most likely later) we might see a fix in the next firmware.

Volume slider bar missing from side of my itouch

I have a itouch 3G and I cracked the screen a couple of months ago. I know that my 1 year warranty does not cover cracked screens, so I did not do nothing about it because it was just a crack on right corner of the screen and I checked everything else and I saw no other damage. Just the other day I was listening to my itouch and when I was changing the volume of my music using the volume bar on the side of my itouch I saw that part of my volume bar was crack and fell out of the ipod. Well since that happen the rest fell of the volume bar fell out and I have no volume bar on the side anymore.Is my warrenty still good to get that fixed or am I better off saving up and buying a new ipod?

I wouldn't go as fr as getting a new iPod yet. Take it into a genius bar and see what they say. I got my old iPod nano that got sent through the wash replaced for around $50. I don't promise anything.

Get Time Stamp will milli seconds from string time stamp format

Hi Guys,
I am trying to get the time stamp with milli seconds value from string format time data,
Attached the snippet (Get milli seconds to Time stamp)I tried.
Attached Sub VI Convert string to time stamp
When run,I am not getting the time string indicator with milli seconds value even though the format have <%2u> .
please guide me on this.
..AND Finally i will be converting the date and time string output to time stamp data type
Attachments:
Convert_String_to_TimeStamp.vi ‏13 KB
Get Milli seconds to Time stamp.png ‏25 KB

You do realize you could have just used a single Scan From String to get the timestamp, right?
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Get Timestamp.png ‏43 KB

Extract date/time stamp and modifier name from memo field

I need to extract all date/time stamps and modifier name strings from the Work Log memo field - or conversely, filter out all of the comments after the date/time modifier strings. I have the string extract but it only extracts the first one. I need to loop until all are found - how can I do this? The memo field will look something like this:
3/5/2009 3:32:05 PM John Doe
Comments - string can be any length
3/4/2009 12:35:43 PM John Doe
Comments - string can be any length
3/4/2009 12:28:17 PM Jane Dough
Comments - string can be any length and include date format 2009-06-04 14:20 CST.
3/4/2009 12:27:47 PM Mary HadaliddleLam
Comments - string can be any length
3/4/2009 12:26:55 PM Lamseedivy
Comments - string can be any length
3/4/2009 12:15:22 PM Mareseedoes
Comments - string can be any length.

Here is a formula that will strip all 'comment' and blank lines and puts the datetime stamp and user names into an array. You have to manipulate the elements of the array to further separate the datetime stamp and user name if required.
// Declare two indices
numbervar i := 1;
numbervar j := 1;
// Split each row of the memo field into an array
// if chr(10) does not work then try with chrw(13) or chr(13)
stringvar array x := split({Sheet1_.Comments},chr(10));
// Declare a holding array
stringvar array y;
// Declare the size of the new array to be equal to the elements in array 1
redim y[ubound(x)];
// Copy only if the first word of each element of array 1 is neither "comments" nor a blank line
for i := 1 to ubound(x) do
if split(x<i>) = 'comments' or x<i> = '' then
else
(y[j] := x<i>;
j := j + 1;
// Compress the new array to eliminate the last blank element
redim preserve y[j-1];
// Joining the elements of the new array and the number of elements for display
join(y,chrw(13)) & chrw(13) & ubound(y);
With your example, this formula will return:
3/5/2009 3:32:05 PM John Doe
3/4/2009 12:35:43 PM John Doe
3/4/2009 12:28:17 PM Jane Dough
3/4/2009 12:27:47 PM Mary HadaliddleLam
3/4/2009 12:26:55 PM Lamseedivy
3/4/2009 12:15:22 PM Mareseedoes
6.00
Make sure the "can grow" option is checked to display the results and also check for case sensitivity of "comments".
Edited by: Sanjay Kodidine on Jun 30, 2009 10:13 AM

Can I create a time stamp of 2ms or 1ms resolution in a text file

I have trouble creating time stamps in text files that have 2ms resolution. Although my timed loop in LV 7.1 is running the code at 500 Hz without any late iterations, and I record all the data points in the data file, the time stamps are the same in ms range for 5 consecutive points, i.e 10ms resolution. I would like the time stamps to have a 2ms resolution, where each data points every 2ms should show a different milisecond time stamp.
I am trying to do this to be able to show exact 2ms-time stamps for each data sample from 1 digital input line sampled at 500 Hz using NI-DAQmx 7.2. So far I have been using "Get/Date Time in Seconds" and "Format Date/Time String" to display the time stamp in the milis
econd range.

Use the Tick Count (ms) function. Call Get Date/Time in Seconds when you start to get time of day. Also call the Tick Count (ms). After acquiring each point call Tick Count (ms) again and subtract from the starting tick count. Then add this to the starting Time in Seconds value (with appropriate scaling). The result is your timestamp.
Another approach: If you are using hardware timing for the 500 Hz acquisition, each sample is automatically 2 ms after the previous one. Record the start time and add 2 ms for each sample.
Lynn

Converting time stamp in waveform to seconds

Hello,
I would like to convert the time stamp in a waveform (coming from 'AI Sample Channel') into seconds. Currently when I read the waveform into a file I get a format that looks like
18:00:47.453000
Any help you can offer would be greatly appreciated, it seems like this should be easy to do?
Thanks,
Cullen

In the attached example, I compare converting the datestamp to seconds by converting to double, to extended precision and doing a delta directly on the timestamp iteself (then converting).
Running the VI showed the same results (using Win-XP) for all three cases. Unless you have a better OS, then the top example would probably do.
At least the example will show you how to convert to seconds (in 50ms steps for the example), and how to do it using the array directly (polymorphic functions).
Hope it helps,
RayR
Attachments:
DeltaTime.vi ‏13 KB

Time stamp, progress play bar missing from player

Similar Messages

Maybe you are looking for