Time stamps in mov files created with iPhone and Vista

This has to do with the time stamps for movies created with the iPhone 3GS. When I directly view the files on the iPhone in Vista, it populates the "date taken" field. However, when I copy the files from the iPhone onto my desktop computer, I no longer see the "date taken" field. Any suggestiosn?

Just wanted to repost this question and see if anyone has any thoughts...thanks.

Similar Messages

  • Importing movie files created with SONY HDR-TG5

    Having trouble importing movie files created with this camera. Have had success importing direct from the camera using streamclip, but struggling with old files imported from our PC. These files have these two extensions; .modd and .m2ts

    Eric:
    Thank you. MPEG Slipstream worked great.
    Do you know if there is software available that would let me see what is in/copy the files in the Sony folder so that I might be able to copy the disk directly instead of having to copy the files off of it with Handbrake? Would having the QT add-on for the MPEG-2 playback component be helpful?
    Thanks again
    Tim

  • File Sharing with XP and Vista

    Hi, I have an WRT54G wireless G router. I have a windows XP computer and a Windows Vista laptop that I would like to enable file sharing on. I am having a lot of problems doing so. Can someone please give me instructions on how to do so? Thanks, Alex

    I have the exact same problem, XP desktop connected to WRT54G (wired) and a Vista laptop connect wirelessly.  Every thing works in that the internet connections of both machines work.  I cannot, however, see the two machines in the network neighborhood of the XP desktop.
    Before I installed the WRT54G, I had both machines connected to a wired router I previously used.  Networking and file sharing worked fine in this configuration.  Its only when I went to the WRT54G that I lost it.
    I'm sure this is a simple fix, but I can't fix it!
    rmf

  • Every time I try to upload MOV files from my iphone 5s onto my adobe premiere elements on windows 8 i get 'the importer reported a generic error'

    every time I try to upload MOV files from my iphone 5s onto my adobe premiere elements on windows 8 i get 'the importer reported a generic error'

    jade harding
    What version of Premiere Elements are you using on Windows 8.1 64 bit? For now I will assume Premiere Elements 12 in a NTSC set up.
    Your iPhone 5s video is expected to be 1080p @ 30 progressive frames per second? Do you confirm that? Because of the source of your video, it is highly likely that you are dealing with a variable frame rate.
    Please give the following a try to see if you then have an "importable" product to take into Premiere Elements presumed 12/12.1.
    Download and install the free HandBrake program.
    http://handbrake.fr/
    Import your video file into the program.
    Make sure you browse to and set Destination (suggested Desktop location)
    Go to the Video Tab and set
    Video codec = H.264 (x264)
    Frame Rate = 29.97
    put a dot next to Constant for the Frame Rate
    Click on the Start at the top left of the workspace
    Wait for the "Queue Finished" to appear in the progress bar at the bottom left of the workspace.
    Then see if this H.264.mp4 (1920 x 1080 @ 29.97 progressive frames per second file can be imported into Premiere Elements 12 project with a manually set project preset of NTSC/DSLR/1080p/DLSR 1080p30@ 29.97.
    Details for setting manual project preset can be found in
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    The details that I have posted in this reply are customized for Premiere Elements and should work fine for you.
    We will be watching for your results.
    ATR

  • Is there any simulator to test ipad iphone ipa files created with Adobe Director 12?

    Is there any simulator to test ipad iphone *ipa files created with Adobe Director 12?

    No. Luckily it is very quick to compile and test on the iPad. I've watched people using Flashbuilder and it seems to be a much more complex process.

  • Trying to import a .mov file made with gotomeeting - no problems in past yet says No importable files -None of the selected files or folders can be imported. Change the selection and try again.  re-recorded 3 times and still not accepting HELP

    Trying to import a .mov file made with gotomeeting - no problems in past doing this. After 3 attempts recording the hour long video and trying to upload it to iMovie, it says No importable files -None of the selected files or folders can be imported. Change the selection and try again. What could the reason be?

    After much research and troubleshooting, GoToMeeting replied with the final answer: We do not support the uploading of recordings to editing software. If you are having issues uploading a recording, unfortunately, we do not have tools or steps to resolve this. It is not a supported feature. I am sorry for any inconvenience this may have caused you. 
    The no longer plan to support editing of recordings made with their software.  So, we are planning to find a new meeting provider.

  • Voice Memo .mov files lost in iphone Limbo

    Hello.
    After doing some research it appears that:
    There is a bug with iphone (mine is 3g) that when voice memos are recorded they are recorded as .mov files, and then converted to .m4a.
    I assume this is because .m4a is a more complex algorithm and the little iphone processor can only record .mov on the fly.
    The issue is that if the iphone is interrupted in this process, you will have a voice memo that goes for 0 seconds and a .mov file on your iphone taking up space.
    I noticed in iTunes that i had 3.9 GB of "Other" taking up space on my iphone. After using third party software, i looked into the files on the iphone and found that most of this space was being taken up by files in my "recordings" folder. I went into 'voice memos' on my iphone and individually** deleted all the voice memos (after backing them up) and freed up a significant amount of the 3.9 GB. However, there are still 1.2 GB of .mov files still taking up space on the iphone, and I cannot find a program that will let me delete the files (write to the iphone hard disk) and the iphone itself cannot recognise the files!
    It seems the only way to delete the files is to Jailbreak. I don't want to jailbreak the phone, simply because i believe that when you pay for apple products, you are paying for a product that 'just works'. In other words, they have done all the trouble shooting and tweaking of things to make it all work seamlessly. Jailbreaking reopens the can of worms of software clashes, and you get back into the land of using a windows style system.
    Does anyone have a way around this?
    I have iPhone 3g and Macbook 2.4ghz Core2Duo.

    They won't sync back to your phone as far as I know. You can sync them from your phone to computer to listen to them in itunes. If you delete a voice memo on iPhone, it isn’t deleted from the Voice Memos playlist in iTunes. However, if you delete a voice memo from iTunes, it is deleted from iPhone the next time you sync with iTunes.
    You might try this:
    In iTunes, select the voice memo you want on your phone, go to “Advanced” and select “Create MP3 Version”. See if you can sync that back to your phone.

  • Insert time stamp in ASCII file

    Hi all!
    I am trying to log data values from several channels (so far 4) into one ASCII file including a time stamp in the first column.
    The goal is one file that contains one time stamp per row (in the first column) and one column per channel. It may looks like this:
    TIME  Ch1  Ch2  Ch3  Ch4
    t1        a1     b1     c1    d1
    t2        a2     b2     c2    d2
    I want to save one row (time stamp and 4 channels) each minute as above into the same file. Nice would be to creat a new file each day.
    Problems:
    1. Using the "Save to ASCII/LVM" step: How can I get SignalExpress to insert a time stamp in the first column of each row?
        I have no problem inserting the 4 signals that generate me one column per signal. And using "Overwrite once, then append to file" I get one file for all signals.
        Any idea how to insert a time stamp this way? Or how to creat a new file every 24 hours?
    2. Another way I tried is to use the "Recording Option". But how can I get all the four signals saved in one file?
        After the DAQmx acquisition step I process the 4 channels individually (one scaling step and one threshold step per channel - because of different factors per channel).
        Activating the Recording Option (which would generate a new file every 24 hours, but not starting at 12pm each day...) I get 4 single TDMS-files (and their corresponding tdms_index and meta.txt files),
        one file per signal I am recording. I assume this is because they are 4 individual signals I'm recording and not a group of signals. Can I group individual signals together?
    Thanks for your help
    SSC
    PS: I work with SignalExpress 2.5 and have a NI USB-6210 connected.

    In the recording options tab you can set a stop condition to be 24 hours of data.  And then select the "Restart Log Automatically" option to start logging for another 24 hours.  You can also configure the logging to auto create an ASCII file once logging stops.  With this configuration an ASCII file will be created every 24 hours.  To enable ACSII file generation, select Tools>>Options.. And then set "Automatically export log to ASCII file to true".
    I believe that you will get one ASCII file for each TDMS file.  If you are logging 4 channels from the same device you should be able to log the entire group which would allow you to get only 1 TDMS / ASCII file.

  • Cutting MOV Files created by EOS cameras

    Hello,
    I'm experiencing problems using Premiere Elements 8 to work with MOV files created by the Canon EOS 7D camera (Full HD 1920/30fps). Without rendering the files cannot be played and rendering takes hours. Impossible to work because even a simple 4 sec crossover blend between two scenes takes 15 min calculation time for rendering, without the possibility to check the crossover before. Premiere runs on a 2x2.26 GHz Laptop, 4GB RAM. Same problem also with another laptop. The current quicktime version has been installed.
    I would be glad for some tipps, Thanks

    HERE'S one on the 7D in PrE, with at least one link to another thread.
    Happy reading. There's a lot of good suggestions in those. Pay special attention to the comments in the PrPro forum from Jeff Bellune. One poster, PaulineDC has both cameras and offers some observations. I'd look at her replies too. Also, look for links. Some will be to articles that I have already posted links to, but there should be several more.
    Good luck,
    Hunt

  • TS1538 Hi technical support Team of  Apple  I am sorry but this time  I am very disappointed with IPhone and  IOS 7.1, actually I have IPhone 5,5S both and I was trying to Restore  my Phone for sell Because I want to by IPhone 64 Gold but unfortunately   

    Hi technical support Team of Apple  I am sorry but this time  I am very disappointed with IPhone and  IOS 7.1, actually I have IPhone 5,5S both and I was trying to Restore  my Phone for sell Because I want to by IPhone 64 Gold but unfortunately    both phone stuck on recovery mode with error 1, and 3
    I got Error 3 on IPhone 5 and error 1 In IPhone 5s , I did lot of try as I can my level best , like Update iTunes, stop all security, change cable even change computer format my laptop and install everything fresh in window   I did try to with Mac of my friend,
    Change Internet connections try with DFU mode, Make DFU file Also with redsnow   everything I did
    Whatever on internet information like go to  cmd and run as administrator  to make change hosts file
    Like ipconfig/flushdns everything  everything  what I can….  but I dint get good results and  good information about this error
    Somebody told me this is hardware problem, I make change my battery and charging connector too.
    I don’t know what to do next.. because  I don’t leave any experiment on my stuck phone..
    Note : one  is big issue that apple support team  is also and giving good answer
    I am in Saudi Arabia so I don’t  have any nearest store of Apple.. even Saudi Is Big Consumer of IPhone
    Its Really Bad its big Loss of Money I can’t afford more , Now will not Buy Any IPhone  in future if I don’t get solution..
    Thank You..

    What the **** is this taht you will not provide any service due to just a bit jailbreak..
    we are not much tecnical person.. and mostly consumer dont have good idea about Jailbreak. make your device  much better secure from hacker and jailbreak please we cant afford much money please give me any solution i ll not do jailbreak again please  

  • Customizing Time Stamp In Receiver File Adapter

    Hi,
    I am working in a XI to file adapter scenario.
    The default time stamp in receiver file adapter is yyyyMMdd-HHmmss-SSS.
    I want to time stamp as "ABC_MM_DD_YYYY_HH_MM_SS".
    i searched SDN,but not getting an end to end approach.
    Like...I developed a UDF ,but when I map it to receiver root node..I am getting error.
    Please help.
    Just request for a step by step procedure.
    Also,ASMA is not v clear to me......
    Plzzzzzzzzzzzz help!!
    Regards.

    Hi sriparna,
    The timestamp used by the File Receiver Adapter is a default pattern, to achieve that you have to use a UDF in the middle of the MM and set the receiver file name with the ASMA, read this for further information:
    ´´´´ Dynamic Configuration vs Variable Substitution - The Ultimate Battle for the File Name
    /people/shabarish.vijayakumar/blog/2009/03/26/dynamic-configuration-vs-variable-substitution--the-ultimate-battle-for-the-file-name
    It really helps,
    regards,
    Juan.

  • How can i add a time stamp to tdms file?

    I want the data and the time for the tdms file generated?
    how can i do that?
    should i cinvert .tdms to .lvm and use the data storage option or excel add on option for .lvm file created?
    cant i directly have the time stamp for tdms file generated?

    How are you acquiring the data in the first place?  That will matter in how we want to approach this.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Is there a way to load a movie file created using FlattenMovie() function ?

    Is there a way to load a movie file created using FlattenMovie() function ? I tried with NewMovieFromFile() , everything went well but the movie video track somehow had been corrupted.
    The thing is I could nicely convert the original Movie data structure using an export component. But the one I recreated after saving disk did not converted well ( It produced only sound ). Plz help I seached all over the documents to unerstand 'How to use flattened files' but could not.

    Hi telsenbroich,
    Have a look at this response
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=506500000005000000269A0100&HTHREAD=000104998&UCATEGORY_0=_8_&UCATEGORY_S=0
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • I want to transfer my photo and movie files from my iPhone 4S to my mac.

    I have posted this question before without any success and was hoping by reposting it may promt a solution to my problem.
    I want to transfer my photo and movie files from my iPhone to my Mac OS X (10.5.8).
    But I don't want to use Cloud or iTunes.
    Is there a way to connect my iPhone 4S to my Mac directly,
    say ... via a program or such on my MAC, to drag and drop the photos and Movie files,
    directly into a folder. ??????????
    Reason want to connect iPone to MAC or MAC to iPhone is ....
    I have no DATA on my iPhone Mobile plan at moment.
    So Photosync app is no good, as I can't download the app to my iPhone.
    I can download a Photosync to my MAC ...
    but with the Photosync app you can only send data.
    Thanks in advance for any help.

    Sorry I should of mentioned ....
    Reason want to connect iPone to MAC or MAC to iPhone is ....
    I have no DATA on my iPhone plan at moment.
    So Photosync app is no good, as I can't download the app to my iPhone.
    I can download a Photosync to my MAC ...
    but with the Photosync app you can only send data  (so needs to be on the  iPhone).

  • Retaining date/time stamp when copying files from a backup network drive

    How do I retain the date/time stamp when copying files from a backup such as a external drive or a network drive?

    i don't trust MA at all. known to create a lot of problems.
    instead, see the green box in this user tip.

Maybe you are looking for