Time stretch in Logic 7 pro not working !
Seasons greetings
im having trouble with time stretching wave files within logics audio editor. I select time and pitch machine and try to make my changes - i can see the processing happening eg yellow box top left saying 'samples processed' & numbers going down as file processes but the file does'nt change in pitch or time as instructed.
i can however perform simple gain changes to the file within the same window etc.
any thoughts?
P.S i have enabled permissions on the file etc and have checked the audio window for the new file but it does'nt appear there.
really stuck with this one and iam currently working on a project which needs time stretching
help would be much appreciated
Sounds like it may be a temp file issue, even though TM acts funny and fixes itself. Re: temp files, you can try creating a backup of the file ( using Logic ), set your undo locations, etc to song dir and monitor the temps as they go - you aren't using a case sensitive volume, are you?
J
Similar Messages
-
Logic Pro not working right: HELP!!!!!!!
Logic Pro is no longer sending audio signals to the mixer. The Output display is no longer available in the Mixer. Do I need to do a major reinstall of Logic from scratch?
This was not my initial problem, but developed as I tried to "fix" a different one. The following is a history of what I did with ensuing problems noted.
1) My external keyboard (Roland U-20) was no longer available in the arrange options when I created a track. (initial problem)
2) I went into the Environment and discovered it was no longer in that window.
3) I went to Audio Midi Setup and noticed it was there.
4. I imported an older environment set up. It looked OK so I then also imported this into my Empty Project Template, saved it, and went back to the initial project.
5. When I tried to play a sound from the Roland, it was not coming out the right speaker, although the correct "instrument" was there. The sound on the left speaker was very distorted.
6. I went into the UNDO section and went back. The arrange window looked like a mess with many crossed out outputs in the tracks, instead of the names of the original tracks. The environment window no longer had the Roland.
7. When opening my original piece, I then noticed that the mouse editing control buttons on the top right were altered -- instead of 3 buttons, there are now only 2. I reopened the empty Project and found the same.
8. I deleted my empty Project template.
9. In the original project, I noticed that the mixer's output buttons are no longer available. No sound at all coming out of Logic to my Firewire.
10. I opened a different template. Same thing.
11. I noticed that Logic saw me touching the keyboard, and then I tried to see if it would record MIDI data. Message: Record drive/partition "MPC12" not found.
10. Tested both i-Tunes and Garageband which both give me correct audio.
11. I went back into Time Machine and replaced Logic Pro with yesterday's application.
12. Problem persists.
13. I deleted any logic plist. I could find. Reopened Logic. The computer asked me to reregister. After doing so, the software still had not changed.
14. Rebooted the computer. No change.
15. Totally frustrated. This message sent.
Thanks for any help.Not at all. Everything has been working fine for months until I did this thing today where I was trying to get my arrange window sequencing to connect with the sounds in my U-20.
It seems now that my digital audio track is working again but the output and master are not in the Mixer windows. I can not hear the digital instruments that come with Logic when playing through the sequencer. However, I am noting that if I create a separate window with the mixer, and I click on one of the virtual instruments, then touch the keyboard, a sound does come up.
So:
1) How do I get the software to create both an output and a master control?
2) How do I get the software to have three mouse control buttons for the top left of all the editing windows (arrange, score, piano roll, sample editor)? -
Why does the internet on my new macbook pro not work when my old macbook's does?
Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?
Here is your fix .. I have uploaded my properly calibrated profile get it here :
http://www.megaupload.com/?d=YAJL6A9X
And it should go to your user folder/Library/ColorSync/Profiles
if you have one already you can rename either one ..
and then go to system preferences - displays - color to select the profile .
you will get rid of the blue tint while keeping correct color and gamma
This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . . -
Does logic pro 10 work with the akai mpk25?
looking to buy the logic pro. not having fun with Ableton. I feel like logic pro is worth it. also do all the plug-in come wiith it? Do I need anything extra after buying logic pro to hear them through monitors?
Its not really about if it works with Logic Pro 9 or X
It's more about if it works with the version of OS X you are running or intend to run later....
So if it is currently working under Mavericks 10.9.3 then it should work with LPX or any other Audio program... for that matter.
Cheers..
Nigel -
I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?
What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time. -
Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
Attachments:
PWMs.vi 130 KBother problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2
-
I just fix my macbook air because it was kernel panic. They changed the hard drive. I could not back up with Time Machine, because it did not work and I had over Adobe creative suite 5 design premium student. But I finished my studies last year and I'd like to know how to get the serial number for me to reinstall Adobe creative suite 5 design premium when I am no longer study because I would still like the used? It is not fair if I do anymore because I really need.
You can download Creative Suite 5 here:
Other downloads
To deal with the issue of the serial number and using it again, you'll have to use Web Chat. Here's a link:
Adobe ID, sign in, and account help
See the bottom of the page for a link -
my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me
Please helppppp
-
Itunes will not respond to my ipod touch, i have re-installed countless times and it still is not working. i have also tried different USB's and nothing. please help!
- Try here:
iOS: Device not recognized in iTunes for Windows
- Next try a different computer to help determine if you have a computer or iPod problem. -
i baught Seagate Backup plus 2T hard drive to use as my Backup time machine. But its not working. when i connect to time machine its not coping files, it keep saying preparing files. Can someone help me please...
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Acrobat X Pro not working, tryed to re-install and does not recognize Serial Number?
Acrobat X Pro not working, Serial Number not recognized?
Hi lv123321,
Do you have Acrobat only License no or is it a part of suite. If Acrobat X pro is a part of suite then you need to use the suite setup to install Acrobat.
Also if possible could you please private message me the serial no so I can try decoding it.
Regards,
Abhijit -
THX TruStudio Pro not working (Windows 8.1 64-bit) GT60 0nc - help !!
THX TruStudio Pro not working there is no effects, like doing any thing on THX TruStudio Pro will give no change in the sound
i have the latest realtek sound driver
any help please !Quote from: adybrasov on 13-January-14, 20:41:25
Have you tried the original one from windows 7 x64? >> thx_pro_nb_w7_3264_10211 THX TruStudio Pro(W7 3264,1.02.11)
I suggest you delete the Windows Registry in connection with THX then restart and try your luck in >>> this case MSI version on the website of your laptop goes. Let me know and I'll give you my kit.
THX TruStudio Pro Settings from windows 7
not working at all on 8.1 -
Canon file RAW CR2 and mac book pro not working ...?
Canon file RAW CR2 and mac book pro not working ...?
I'm using Digital photo professional software
and i'm using canon camer 5D mark2 and mac book pro 13inch last version
i'm trying to shooting directly by Digital photo professional, Remote shooting but the RAW file con't open by the software or mac preview but with photoshop Cs5 can open
is any one have the same issu ? and how fix it please
What i did :
- update camera RAW
- Update Mac software
- update Digital photo professional
Regards,,
BandarDear all
is there any solution for that ? -
I was trying to update operating system of my iphone but it gives the following error(We're sorry, we are unable to continue with your activation at this time) Now my phone is not work working can anyone help?
Is your iphone hacked/jailbroken?
-
my iphone ( 4 ) suddenly switched off...i press several time in power button but not working.pls advice me
hold the power button and home button for about a minute
plug it into a computer with itunes on
either way should work -
Since windows has been update acrobat x pro not working, what to do?
since windows has been update acrobat x pro not working, what to do?
acrobat x pro cs6, windows 7, there are no text massage
i did tried to uninstalling and reinstalling acrobat, but the problem comes
back
the issue is:
i can close to pdf file at working on indesign, but when i want to open the
file the acrobat wont respond, it just not open at all.
2014-02-19 16:23 GMT+02:00 Rave <[email protected]>:
Re: since windows has been update acrobat x pro not working, what to
do? created by Rave <http://forums.adobe.com/people/Rave> in *Acrobat
Installation & Update Issues* - View the full discussion<http://forums.adobe.com/message/6135679#6135679
Maybe you are looking for
-
What is KPI in SAP BI and what tool do you use to design it?
Hi, I am a currently in project that demands the design of a KPI in SAP BI. I need some help in understanding the concept of KPI and how you design it (Using Which TOOLS? For example BEx analyzer). And I also want to know if KPI is a form of reportin
-
It seems a lot of people have had this problem but I see few solutions, so I'll try. I have an X-Fi (drivers dated 6/09), Vista, and 5. speakers. I get subwoofer in games but not in music (Windows Media Player, etc.) I tried downloading the Console a
-
Purchased Retail copy of Photoshop CS6 but I have no Disc Drive.
I purchased a retail copy of Photoshop CS6 but I have no Disc Drive. Is there a way for me to install it from the Adobe site, then activate it with my Serial Number from the retail? I've already opened the box.
-
HT201412 My Macbook pro freezes for few minutes every time I startup after charging
My Macbook pro freezes for few minutes every time I startup after charging I am using the latest update of IoS
-
Help restoring iPhoto to original specs
I backed up my wifes computer on my external drive and pulled the plug a bit early and lost some of MY data. I have backup files over two hard drives, so I still have backup data to import to iPhoto for restoration. I had to use the program "iPhoto L