Time sync two Panasonic HVX200?

Anyone know how to time sync two HVX200s together? I heard that there was a way to do this with the remote, but I'm not seeing anything on-line about this. I must be missing it, or have been miss-informed.
Thanks
calvin22

As far as I have read or seen the manuel doesn't go
over this.
apparently, page 58 of the manual describes syncing two hvx cameras via firewire. the panasonic website kept crashing safari whilst downloading the hvx manual so i found this info here http://www.dvxuser.com/V6/showthread.php?t=68797&highlight=timecode+sync

Similar Messages

  • Can i sync two time capsule via WAN?

    I want to set up a new time capsul in my company, and i like to know if i can sync them with a time capsul which stands in my house?

    Sorry, but no. You cannot sync two or more Time Capsules regardless of if they are remote or on the same LAN. You could; however, operate them as completely separate Time Machine backup destinations.

  • I Synced two of my computers and the Sync was interrupted and now I don't have all the tabs I wanted transferred. How do I redo the Sync? I've clicked the Sync Now button several times and nothing seems to happen.

    I Synced two laptops, mostly to transfer several tab groups open in one to the other. While the Sync was in progress, the Options window started to vibrate. After a while, I closed the window and then Firefox. After restarting Firefox, I found that only a few tabs and little of the history had been transferred. I clicked the Sync Now button, on both devices, but nothing further has happened so far.

    iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup? 

  • Multiclip editing + Panasonic HVX200

    Hello!
    I'm having some trouble trying to create a multiclip out of a footage from a Panasonic HVX200 HD camera...
    The thing is that the camera divides long clips into smaller ones... so to have the whole footage from a camera, i need to create a sequence and put all the small clips in the right order.
    but, now that i have all the footage from a camera in a sequence, i can't create a multiclip angle with that sequence.. it seems final cut doesn't accept sequences as camera angles, only clips..
    i already tried to export that sequence and create a new video file.. but i face two other problems.. i'm working 720p24... from export i get either a video file with Square Pixels (they were HD960x720 before that) or if I recompress the frames.. i get problems with sync.. it starts to lose the syncronization and eventually it comes back, and then loses agains (in every point where one of the "subclips" started on the original sequence)...
    Does anyone know if I can create a multilclip angle out of that sequence without exporting it? Besides those sync and format problems, exporting everything would also eat up a huge amount of space on my HD.. and that's not a option..
    Thank you!

    Typically when no one answers, no one knows the solution. But since you won't take the silence as an answer...
    I work with p2 footage quite a bit, but I never had the pleasure of multicam within FCP...so I don't have an answer for you. If you do happen to have a shoot where you intend on multiclipping several cameras, it would be wise to NOT start and stop the cameras at different times. Rather, start them all at once, slate the shots (hand clap works fine) and stop the cameras at the same time. Or constantly roll the camera and don't pause ANY OF THEM until all of them are ready to stop.
    But that doesn't help you at all now. I just wanted to pop in and say "I have no idea" as you seemed to want SOME KIND of answer.
    Shane

  • I synced two of my email accounts via gmail's POP3 thing. But now my iphone's gmail inbox shows a random selection of emails (not most recent ones that are in my inbox). How can I make my iphone inbox match what I see when I log on using a PC?

    I synced two of my email accounts via gmail's POP3 capabilities. But now my iphone's gmail inbox only shows a random selection of emails (i.e. right now it is May 31, 2013 but the emails in my inbox are a couple from Nov 12, a few from Oct 12, and then some way older than that and so on.When I log into my gmail from a computer, I see all my emails in the logical, standard order. How can I make my iphone inbox match what I see when I log on using a PC?

    If you're trying to decide between using POP and IMAP, we encourage you to use IMAP.
    Unlike POP, IMAP offers two-way communication between your web Gmail and your email client. This means when you log in to Gmail using a web browser, actions you perform on email clients and mobile devices (ex: putting mail in a 'work' folder) will instantly and automatically appear in Gmail (ex: it will already have a 'work' label on that email the next time you sign in).
    IMAP also provides a better method to access your mail from multiple devices. If you check your email at work, on your mobile phone, and again at home, IMAP ensures that new mail is accessible from any device at any given time.
    Finally, IMAP offers a more stable experience overall. Whereas POP is prone to losing messages or downloading the same messages multiple times, IMAP avoids this through two-way syncing capabilities between your mail clients and your web Gmail.
    That is from the page that you linked- does highlighted part of message ring a bell?

  • HT201269 Why isn't my cell phone backing up properly to my laptop?  Backed it up three times in two days.  I replaced my old cell phone, had to setup as new, then backed up from "last backup" but it didn't work at all. The last backup was available was mo

    My cell phone will not back up properly to my laptop.  I have tried three times in two days as I knew I was getting my new phone today and wanted to save all my information.  The problem is that it backed up very random things like things from my IPod from years ago, and did not back up all the information it should have from my "old" cell phone.  Now I am missing almost everything.  What happened and can i fix this?

    First, make sure you are using the most current version of iTunes 11.1.3 (8).  Second, what version of iOS 7 was your old phone running, i.e. 7.0, 7.0.1, 7.0.2? If your back-up was made with a version of iOS that is newer than the version on your new phone, it will not sync. For example, if your back-up was of a phone running iOS 7.0.4, and your new phone was running 7.0.2 out of the box, the back up will not sync to the new phone until it is updated to iOS 7.0.4.

  • I have a domain with 2 DCs (both virtual machines) in different Hyper-V Hosts. Dose this case make any influence on the time sync?

    As title,
    I have a domain with 2 DCs (both virtual machines) in 2 different Hyper-V Hosts, and one of the perform as a PDC Emulator.
    Dose this case make any influence on the time sync?
    i.e. Both of the VMs sync with Hyper-V host, instead the other host should sync with the PDC Emulator?
    I run w32tm command and get the following result:
    C:\Users\Administrator.DOMAIN8>w32tm /query /computer:dc8.domain8.local /source
    VM IC Time Synchronization Provider
    C:\Users\Administrator.DOMAIN8>w32tm /query /computer:hpvzh05.domain8.local /source
    VM IC Time Synchronization Provider
    HPVZH05.domain8.local works as PDC server.
    How can I make DC8 sync with HPVZH05?

    Awesome!
    It looks like your PDC is successfully pulling time from an external source.  DC8 is not longer pulling from Hyper-V so that is good.
    When you set a client to pull from a source ( and in this case DC8 is pulling from NT5DS, which tells it to pull from the PDC), and it CAN'T pull from that source, it will default to Local CMOS Clock.  This is likely an easy fix.
    First, check connectivity:
    - Method one- Download Portqry and run this command: portqry -n HPVZH05 -p both -e 123 and see if the results say listening, or
    - Method two- Run this command from DC8: w32tm /stripchart /computer:HPVZH05
    If you get any kind of error using method two, it's a connectivity issue.  (Maybe you have a firewall that's blocking access?)
    The other cause of this, and probably more likely in your case, is that your PDC isn't properly advertising as a reliable time source, so DC8 isn't 'allowed' to pull from it.
    Try running this command on your PDC: w32tm /config /reliable:yes
    Then go restart time on your PDC, THEN DC8 again.  (net stop w32time & net start w32time)
    Here's an article you can reference: http://technet.microsoft.com/en-us/library/cc794937(v=WS.10).aspx
    - As always, if you find my posts to be helpful, please mark it appropriately.  Thank you :)
    Chris Ream

  • Date and Time Sync at boot for Active Directory/Open Directory Authenticati

    All the macs in my school district are set to automatically sync their time with a network time server. They do not do this unless the system preference is opened. This poses a problem as all our users must authenticate against an Active Directory and an Open Directory server. If the time is out of sync they can not login, and therefore can not fix the time. I must then login in with a local admin account set the time and then the network account can login. I have tried using direct IP addresses for the NTP server. That doesn't work either. I have adjusted the tolerance of the AD server to accept a large discrepancy in time (did not work). Set the users to be mobile accounst (local home folders), did not work. The only fix will be to ensure that the time does sync at boot, before login. Is there a way to force the computer to sync at boot to a given NTP server, prior to the login window appearing?

    I have come up with my own solution for this issue. It is a two part solution. We found that the computers are experiencing time drift and that after they get out of sync by 5 minutes they can no longer login. One would think that the setting in the Date and Time system preference to automatically synchronize the time would take care of this. That however is not the case that check mark does not affect the ntp service at all. It merely eliminates the need to click a button when entering the system preference. How did we discover this? well that is part of the solution. We used webmin (http://www.webmin.com) to look at the ntp configuration. No matter what changes we made with the Date & Time preferences nothing changed in the system ntp settings. So on to the solution: Install webmin, and configure the ntp protocol manually to sync at your desired interval (I did hourly). This stops time drift. Next create a startup item and associated plist to force time sync at boot (be sure to loop it as different machines initialize their network cards slower). I have made ours available for download (http://www.manheimcentral.org/~getzt/netTime.zip). I hope this helps others. We have found that this works fairly well.

  • Why can't apple let us sync two computers over bluetooth?

    I am extremely annoyed that mac won't let you sync two computers via bluetooth, when you can easily do it with phones and pdas. It seems to me that it takes the exact same technology to do so, and the only reason mac does not let you sync two computers is that they want to force you to pay $100 for a .mac account. Very Microsoft-like of them. Apple advertises that you can do this function as part of the OSX, but fails to mention it requires additional cost. I hope they provide this in the future.
    I've heard a new program, spanning sync, may work, but that is just for your calendar.

    1) Apple always advertised its computer to computer sync'ing as ".Mac sync" (http://www.apple.com/macosx/features/dotmacsync/) so I don't see where they "fail to mention it requires .mac" or put that "in the small print no one reads"
    2) Peer-to-peer sync'ing leverages many conceptual problems that sync'ing with a central server does not have. It takes a lot of effort to have proper, reliable, secure, yet simple-to-use peer-to-peer sync'ing. It becomes even worse when more than 2 peers are involved, and becomes a total nightmare when there can be cycles in the sync'ing swarm. Apple took the simpler, reliable approach. Of course, Apple can put money to provide some peer-to-peer solution but it's likely not worth the money yet for Apple.
    3) Third parties can provide peer-to-peer sync'ing in no time (if it were that simple) since Tiger, thanks to Sync Services... yet there isn't many solutions out-there... however, maybe you should take a look on VersionTracker. You might find what you want:
    http://www.versiontracker.com/macosx/index.shtml
    Remember... sync'ing is never that simple.
      Mac OS X (10.4.8)  

  • With Muti-clip gone from FCP X, is there a new way to sync two cameras with FCP X

    With Muti-clip gone from FCP X, is there a new way to sync two cameras with FCP X

    I film with two cameras then copy the files from each camera into their own folders. I then use ClipWrap to convert the MTS files into AIC.  If the recording was one long contiguous session, many cameras will split the MTS files into 2GB chunks.  ClipWrap will Convert Multiple to Span to reassemble them properly.  With the AIC .MOV file from ClipWrap, I then use FCP X to Import the MOV files from camera 1 and camera 2.  I prefer to do it that way versus using FCP X Import from Camera.  I then move the clip from camera 1 onto the timeline in the "primary storyline" (FCP X terminology).  I drag the camera 2 clip above the camera 1 clip and line up the audio from the two cameras while that audio is still attached to the video so everything stays in sync.  FCP X has a way to automatically sync two soundtracks, but I have not gotten around to that yet.  With camera 2's clip attached to camera 1's clip as a "connected clip" above the camera 1 video, I then do an edit to go between the cameras as seems best to me.  When the connected clip of camera 2 video sits above the camera 1 video, it will take priority over the camera 1 video.  I then split camera 1's video clip taking out sections when I want to go back to the camera 1 view. Of course I can trim camera 2's clips until I get it the way I want it.  Since FCP X uses the magnetic timeline concept, and camera 2's clip is "connected" to the camera 1 clip, as you split and trim camera 2's clip, everything will stay in sync across the two camera "tracks".  When there is no camera 2 video above the camera 1 video, camera 1 video will be seen.  When camera 2 video is above camera 1 video, camera 2 video will be seen instead.  With a single editing pass, I can then do all the editing I need to go back and forth between two cameras.  The same concept is expandable to other camera "tracks" as long as you are using vertical position in the timeline to determine which camera is seen when.  If you would like for it to look like a multi-camera track composit like before FCP X, you can simply select all your clips and make a compound clip out of it.  You will then see the multiple camera clips side by side in a single "track".  Double click on that "clip" in that "track" to go into the structure and editing individual "tracks" around if needed.  Think of a compound track as what a sequence used to do.  Anyway, there may be other, and easier ways to do this, but with a single edit through my recording, I can easily and visually cycle back and forth between camera views.  It's just that things are called differently now ... and, as of this time, we do not have a single button camera switching function to let us view multiple cameras simultaneously and switch between them using a keystroke for each camera.  Still, I have a way to do it, and it has worked very well for me, in fact I was pleasantly surprised at how easily I could do multi-camera in post.  Hope this at least gives you one option.  Others may have a better way.  Best wishes.
    stephen

  • Syncing two computers via network session

    hi
    this topic started out in another thread, really should have it's own though...
    so i want to sync two computers via a "network session".
    one is a G4 (dual 800 running logic pro 7.2.2) the other is my macbook pro running logic pro 6.4.2.
    basically all i am using the macbook for is to playback a quicktime movie...
    now i have successfully got the network session going in "Audio Midi Setup", but for the life of me can't get the logic on the macbook pro to slave up. even though mtc is set up and the logic 7.2.2 is set up to send mtc via the network session.
    if anyone has any ideas...please feel free...
    cheers, warner

    really?
    cool.
    have been researching this a little bit (not that i have the time - just got curious).
    there are a couple of relaly interesting apps out there that can take MTC and play video. one in particular was very interesting....check this out:
    http://mac.softpedia.com/progDownload/VIDVOX-GRID-Download-9038.html

  • FCP and the Panasonic HVX200

    We are currently researching what is needed to upgrade to this new camera, Panasonic HVX200 with FireStore HD, and to see if our current FCP stations need upgrading. The two main stations are:
    Dual 2.0/G5
    6 GB RAM
    2 TB RAID
    23" Apple Display
    ATI Video/128 MB
    Sony NTSC Monitor
    Kona Capture Card (not sure what version)
    Flying Cow MIDIman
    Sony BetaSP Deck
    First, if we shoot DVCPRO 50, can these systems handle this type of footage? Also, can we shoot DVCPRO 50 and go down to DV as we normaly do? I'm guessing this footage will still be better than our old cam, even after downsampling.
    Second, what would be a nice system to make this cam sing? I would start with a Quad G5 with lots of RAM. Looking for video card, monitor, HD suggestions.
    Thanks in advance!
    --Alex

    YOu know what, I haven't tried the DV option yet. Tell you what, I'll shoot DVCPRO HD and DV and look at the difference. Other than the obvious quality differences, I'll see how it manages the lighting situations.
    I don't want to try to dig into this camera and set it for DVCPRO 50, because they will be using it again for another shoot and I don't want to mess with the settings.
    Are you shooting DVCPRO 50, then downconverting to DV for the quality? jst curious. I haven't done it, so I don't know the answer for sure.
    Shane

  • Sync two audio clips from two angles of the same shoot?

    I don't know if this is possible, however I was wondering if it is possible to automatically sync two clips from the same shoot. I have footage from an event which has two angles being filmed at the same time, I am currently manually matching the audio and video to make sure it's in sync however I wondered if there was a way of FCP doing this for you? Doing it manually is fine, but it would be neat if there was a way to automatically do it.
    I think this may be a pipe dream, but I'm curious to know either way.

    If you don't have matching timecode and you don't wish to purchase Pluraleyes...
    then you can use FCP's multiclip editing process to sync in-points and out-points on video from the two cameras.
    Since it appears this would be your first time using this feature I'd recommend reading the following helpful tutorial:
    http://www.kenstone.net/fcphomepage/multicam_editingmartin.html

  • Syncing two Macs with Server

    I have a 2012 Mini running Server, and a 2012 MBP. The Mini is my main machine, and I use the MBP when I'm outside the house or just sitting on the sofa.
    Anyway, I want the MBP to be a mirror of my Mini's user account. Mail is sorted by IMAP servers; I use iCloud for contacts, calendars, photos and iTunes.
    But that still leaves the documents. Ideally, I want REAL TIME syncing, like you get with DropBox. But just between the two machines when they are on the same LAN.
    Someone has suggested using mobile user accounts, but I'm not sure that's ideal. Am I right that it only syncs when logging out? In any case, the two user accounts are likely to be logged in simultaneously, which is asking for trouble.
    I'm surprised this isn't asked more often -- if it has been and my Google fu is lacking, please point me in the right direction. I've looked at other products but most don't offer real time.
    Thanks

    FWIW, I've not yet encountered a really good generic real-time documentation synchronization tool — they all have trade-offs.
    Having users logged in and active in parallel and the resulting necessity to resolve conflicts is not an easy problem, in the defense of the folks working on this.
    The Apple solution here is iCloud for the documents that supports.   I've previously tried using Apple's portable home directories mechanism (PHDs), and those do work but have their own requirements and some limitations — and the requirement to deal with the occasional synch bugs and synch conflicts.  
    Tools such as rsync and git can be common recommendations with trade-offs, and using those terms and searches for alternatives to DropBox will find you various other discussions. 
    OwnCloud will be another approach, but with a different approach and with different requirements and limitations. 
    Of all of these, I'll be next looking at OwnCloud.

  • Syncing two iphones on itunes

    I used my wife's computer to sync my iPhone4 (since my laptop was in the shop and I hadn't connected to iTunes to upgrade software). I went to the Apple Store and spoke to someone at the Genius Bar (or service counter?) and asked about using ONE itunes to sync TWO separate devices. Again, I needed to sync to get the latest update to the iPhone4, at that time.
    Well, I was assured that there wouldn't be any 'crossover'. What's mine would remain mine; what's hers would remain hers.
    That isn't completely true. ALL of my apps are in iTunes and her apps are on my phone.
    I just wanted to sync my iPhone, back up MY apps, NOT get my wife's apps, and keep the iOS current.
    The advice that I got helped to create a mess. It's not a serious FUNCTIONAL problem. But, it's quite a bit annoying. (I have TONS more apps than the wife and our social media interests are VASTLY different.)
    Any advice on how we can clean up this mess AND avoid it, in the future, even if we share the same laptop to sync?

    How to use multiple devices with one computer

Maybe you are looking for