Time to create a dissolve New iMac v Old G4

Hi all,
I have just got a new iMac have been testing it in iMovie HD (I don't like iMovie 9)
I created a 4 second dissolve, it took 40 seconds to render.
I did the same on my G4- it took 14 seconds to do the same dissolve, same project.
I thought my "new toy" would be a lot lot faster.
Can any one give me a reason for this please. ?

Hi Karsten & all, Thanks for all your help.
At the moment I feel a bit like Klaus, I could swear at 09.
I spent about two hours yesterday talking with an Apple Tech guy, who was very helpful but unfortunately none of his suggestions has worked.
As I said earlier, I connected my G4 to my new iMac with firewire and copied, or is it "migrated"? all my settings and apps over, including iMovie 6. I suggested to the Apple Tech guy, who I must say was very patient with an old geezer of 74 who is a bit-lot deaf, that this could be the problem, and should I do, (is it called a clean install? ) he said no. He talked me through quite a few things, changing things over etc. so many I can't honestly remember what.
I'm not sure how to erase iLife09 correctly, I have iLife6 which has iMHD6 on it.
How do I erase iLife09 please. I'm not that good at this technical stuff, thats why I want to continue using 06, I don't want to start learning a new method. I like iMovieHD6.
thanks again Jim (meresider)

Similar Messages

Time Machine issue on a new iMac - "Cleaning old backups..."

Just got a new iMac. Migrated my system over from a TM backup from my old iMac.
I then let TM inherit the backups on that drive. Now, I am attempting to do a TM backup, and it stays on "Cleaning up old backups..." forever.
What's the deal?

Information in C4 in 1st linked article.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems

I have "migrated" my Time Capsule files to my new iMac and most of the files to me "I don't have permission to view files" I am they admin....will I thought I was. What gives?

I have "migrated" my Time Capsule files to my new iMac and most of the files to me "I don't have permission to view files" I am they admin....will I thought I was. What gives?

You should be able to change the permissions on the files.. this is yet another bungle by Mavericks I suspect.
http://support.apple.com/kb/PH13799
Sometimes it is because you Migrated wrongly.
http://pondini.org/TM/E10.html
It is not up to Mavericks because sadly the guy who wrote all this great info died recently.

Migrate to new iMac from old iMac and am getting 'incompatible software' message.

Im trying to migrate to new iMac from old iMac and am getting 'incompatible software' message. I'm not sure what to do- can I revert back to snow leopard from mavericks?

Hi Mark,
If you install Mavericks, or in your case migrate from an old computer running Snow Leopard (or an earlier version of Mac OS X) to one using Mavericks, some of your software that was designed to run on older computers may not function in the new OS. See this article -
OS X: About the incompatible software folder
http://support.apple.com/kb/HT3258
In particular -
If you see a message indicating that you can't use "this version" of an app, contact the software's vendor or visit their website to see if a later, compatible version of the app is available. If you purchased the software from the Mac App Store, use Software Update to see if an updated version is available there.
and
During installation, OS X moves known-incompatible software to a folder named "Incompatible Software" at the top level of the startup drive. If this folder is present on your Mac, see what applications are in it, then check for available updates. To obtain a newer version of an Apple app, check the Mac App Store, or visit the Apple Store website.
Regarding installing an older operating system on your new iMac, Apple does not support doing this, as described in this article -
Don't install a version of Mac OS X earlier than what came with your Mac
http://support.apple.com/kb/HT2186
Thanks for using Apple Support Communities.
Best,
Brett L

Time machine does not recognise new imac

I backed up a new imac using time machine and a 1TB time capsule.
The imac died, and I have a second brand new imac.
Using the migration assistant/restore from time machine, I was able to restore my old system - note when this was completed, after 3 days, I had to create a new user, then go back and switch to the user that I recovered.
Now when I try to set up time machine, it does not recognise the current system, and wants to create a brand new back up of the entire system. I do not have enough room on my time capsule to do this, plus I don't want to lose my previous back ups.
I am currently using the computer as recovered from time machine, so don't understand why it wants to start from scratch and what I can do.
Any help would be greatly appreciated.

I have part of the answer, but cannot -at least yet - find the rest of the answer in older discussions.
The name of you backup file is YourMachineName_YourMACaddress.sparsebundle. Time Machine is using the MAC address of your (1st) network adapter as a unique identifier. Your new machine has a new MAC address so Time Machine thinks it's a different machine. Which it is in one sort of way, but you want to treat it as the same machine and continue backups.
It's not as simple as renaming the sparse bundle changing the MAC address part of the name to the new MAC address.
If you look the contents of the TC disk you see a "hidden" file named '.YourMacAddress' which contains 16 bytes of data - some kind of token?
I know there was a discussion of this - in these forums I believe - and possible practical information on how to change things so they'd work like you wish, but so far I can't find it.
Note: YourMACaddress and YourNewMacAddress are the 12 hex digits of your machines MAC addresses in ASCII.

HT1175 3TB time capsule not working with new iMac

I have a 3TB time capsule that's c. 2 years old. It worked perfectly with my old iMac. I bought a new 27" one when it came out this year and since the time capsule will not work.
I had to clear all the data as a starter. Now it gets a little into the backup taking c. 1 day then resets. It's connected via ethernet cable and has been told to join an existing network.
Currently it says it's backing up 922,498 items, after 2 hours (this is the third attempt, it resets then has no record of the old backup) it says 10kb of 789.44 GB - About 4,664,440 days remaining!!
To clarify I'm trying to use Time Machine with the Time Capsule.
Please help!!

You have made a mistake in the setup.
You do not "Join an existing networking" and use ethernet.. they are mutually exclusive.
What you are doing is backing up over double hop wireless which is slowing to a crawl.
You need to put the TC into bridge mode.. and plug it into the main router by ethernet. Then use wiretess to the TC if you are too far away or ethernet if you are close by..
As soon as you put the TC into join a wireless network it deactivates the ethernet.

Mountain Lion keeps stopping and recalculating download at 53.25MB - I have tried several times now, no joy (have new iMac May 2012)

Mountain Lion keeps stopping and recalculating download at 53.25MB - I have tried several times now with resumes and restarts, no joy (have new iMac May 2012). Any ideas, please?
Thanks, bb2804

In cases like this, if you have an Apple store near by, they will most likely install the OS free of charge for you, if you can't bring your Apple ID along to prove you've paid for it.
Would that work out for you?

Brand new iMac want to install previous data from Time Machine back up, brand new iMac want to install previous data from Time Machine back up

I am waiting on a brand new iMac to repace my 2007 iMac. I have a Time Capsule and use Time Machine for auto back ups. What do I need to do transfer all data from my older iMac to my new one? I am not running Mavericks on the older iMac but have upgraded all along till the Mavericks free upgrade. Do I need to update the older Mac to Mavericks to make the restore easier.
Thanks for any guidance,
JTMav

PowerPC = PPC, this is the architechture of microproccors that Apple used prior to 2006 when they transitioned to Intel based microprocessors. Apple supported PPC based apps from 2006 to about 2012 when Lion (10.7.x) was first introduced. They gave users 6 years to upgrade all of their legacy apps to Intel based apps. Even after 6+ years some users still complained because their old apps would not run with new versions of OS X, that is technology though.
You might still have PPC based apps, if you do and you want to use them they need to be upgraded or replaced. I have noted a link to an article that will help walk you through to see if you have any PPC based apps. If you do then you can decide if you want to continue using them or upgrade.
http://osxdaily.com/2011/07/15/how-to-check-if-applications-are-incompatible-wit h-mac-os-x-lion/

Old Time Machine Back-Ups on new iMac

Hey Everyone..
So I got myself a new iMac today and I'm really pleased with it. I went for the 3.1GHz i5 in place of my old 2.8GHz i7.
Anyways - I restored the new machine from the most recent back up of my old iMac which has worked great and looks just like my previous computer. However..when I enter Time Machine it only goes back as far as today and when I try to do a back up it says there is not enough room. I would have hoped that my new iMac would recognise the back up as it's own and reinstate it as normal..but this doesn't seem to be the case.
If someone could give me some guidance on this I would appreciate it.
Many thanks..
Ricky

Time Machine will always treat a new computer's data as a completely new backup and start it from scratch. You can either get a larger backup drive or erase the current one.
About TM "Backup Drive is Full"
Alert TM only deletes older files if they have been deleted from the source and when TM needs space on the backup drive for a new incremental backup. Time Machine "thins" it's backups; hourly backups over 24 hours old, except the first of the day; those "daily" backups over 30 days old, except the first of the week. The weeklies are kept as long as there's room.
So, how long a backup file remains depends on how long it was on your Mac before being deleted, assuming you do at least one backup per day. If it was there for at least 24 hours, it will be kept for at least a month. If it was there for at least a week, it will be kept as long as there's room.
Note, that on a Time Capsule the sparsebundle grows in size as needed, but doesn't shrink. Thus, from the user's view of the TC it appears that no space has been freed, although there may be space in the sparsebundle.
Once TM has found it cannot free up enough space for a new backup it reports the disk is full. You can either erase the backup drive and start your backups anew or replace the drive with a larger drive.

Installing Time Machine backup to a newer iMac

My old Intel iMac has died and I am getting a newer iMac. Both Macs have Lion installed and I want to install backups from Time Machine to the newer iMac. Is this a straight forward operation or will it cause me some grief?
My old iMac was a late 2006 iMac 2.16ghz and the newer one will be an early 2008 iMac 3.06ghz.
Any information will be greatly appreciated.

It would appear I am on the wrong Forum for assistance with my problem. Will try elsewhere. Cheers.

Please advise - new iMac i7, old iMac G5 PPC, and migration assistant

I just received my new iMac i7 and am getting ready to use Migration Assistant. However, I have some questions:
The logic board on my old machine died, so I pulled out the Hard Drive and put it in an enclosure. This is what I will be using to make the Migration.
My old machine was a PPC, and it was running 10.4.11.
I have read various posts for and against using MA to transfer files and user data between PPC and Intel machines.
I was planning on letting MA transfer everything, and going from there.
Doing it this way, is there really room for MA messing up my new machine?
I have thousands of emails, 80GB of music, 5000 photos, tons of bookmarks, and lots of documents that I'd like to transfer.
I would like NOT to do a manual migration.
Can I safely use MA?
Thanks for all help and advice!

Users migrates files in your user home folder. This is the folder named as your user account short name and has the house icon if you are logged into that user account. So as long as your user files such as Music files, Word documents, etc. are stored in that user home folder, they will be migrated. If you created a folder structure outside the user home folder for some reason, selecting Users will not migrate those folders (because they are not located in your user home folder).
Applications will migrate things in the Applications folder (minus Apple's apps that are already installed). It probably also transfers application-related files at other locations, based on what Migration Assistant knows about and is scripted to do.
Settings will transfer settings from the old Mac to the new Mac, such as hardware and network settings. This is not user data. Since your old Mac is PowerPC, you should set up your Intel iMac independently.
+Other files and folders...+ will transfer files and folders outside your user home folder that Migration Assistant treats as potentially being or having user data. For example, if you had folder called Stuff at the top level of old Macs hard drive volume, that would get transferred. As long as your user data is stored in your user home folder (the house icon), all this will do is transfer random things you do not need cluttering your new iMac. If you know of something that was not stored in your user home folder that did not get transferred, since your old iMac's hard drive is connected as an external drive, you can just use Finder to locate and copy over that something manually.

Will new iMac beat old Powermac???

I've had my powermac dual G5 1.8 since 2004 and am thinking of uprading to a new high-end intel-iMac with leopard.
My main reasons are that my Mac has become really sluggish of late especially with multiple application open and viewing video.
I mostly use my computer for photoshop, watching video and the internet.
I have 512MB ram and a dual 1.8GHZ CPU, the new imac i''m interested in is a 2.8GHZ dual core processor and 2GB RAM, will this give me enough power and performance to not have the beachball all the time when running multiple applications or is a powermac, even an old one, still a faster machine that an iMac??
also does dual 1.8ghz mean two 1.8ghx chips or 1.8 in total, because it it's 2 1.8ghz chips then wouldn't that still be faster (combined) than the new iMac, i'm confused???

My main reasons are that my Mac has become really sluggish of late especially with multiple application open and viewing video. I mostly use my computer for photoshop, watching video and the internet. I have 512MB ram
That's the problem. That is not much over the minimum RAM required for Tiger. You should have at least 2GB RAM. Also, be sure there is plenty of space on your hard drive.
also does dual 1.8ghz mean two 1.8ghx chips or 1.8 in total, because it it's 2 1.8ghz chips then wouldn't that still be faster (combined) than the new iMac, i'm confused???
You have two 1.8 GHz processors. The Intel iMac also has two processors, but they are on one chip. Each processor is 2.0 to 2.8 GHz, depending on which model iMac you get. You should get it with 4 GB RAM.

Transfering music from Nano to new iMac without old computer

I recently had a hard drive fail on my old PC laptop and can't access my iTunes music for my Nano. Is there anyway you can download music onto the new iMac without having access to the old PC? I'm talking about music that's been loaded onto the Nano via CD (not iTunes Store) - Please help

Hey there,
There are several ways you can pull the music off your iPod and onto iTunes. The first link after the Apple support document below provides step-by-step instructions for the direct method if you have a PC as well as a few third party applications (for both the Mac and PC) if you choose to go that route instead. You can also do a simple google search for "copy music from iPod to computer" and you should receive a number of sites that can help you out.
Just make sure that when you have your iPod plugged into your computer, that you don't hit "Erase and Sync" before completing the task of copying your music over.
Also, if you have any purchased music, you will probably have to re-authorize your computer by heading to the Store drop down menu and choosing "Authorize computer."
[5 Ways to Copy Music OFF your iPod and onto iTunes|http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipo d-windows-mac-os-x>
Here are a few more helpful sites.
[Copying Content from your iPod to your Computer - The Definitive Guide|http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipo d-to-computer>
Hope this helps.
B-rock

How do I migrate Lightroom 4 onto my new iMac from old laptop?

I have just purchased a new iMac, and would like to use my version of Lightroom 4 which I have been using on my old laptop. Can I just download it from adobe.com on the new machine and then use my previous serial number to activate it? Is there an easy place to find my serial number if I don't have the original Lightroom packaging anymore? Do I have to deactivate it on my old laptop, before or after setting it up on the new machine?
After all that, is it easy to bring in my photo library from the external hard drive?
Thanks for any help you can offer!

you need that serial number.
if you purchased or registered with adobe check your account, https://www.adobe.com/account.html
to migrate, How to Migrate LR to Another Computer | The Complete Picture with Julieanne Kost | Adobe TV
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Migration to new IMAC from old IMAC with a Backup Drive

I purchased an new IMAC and have an old IMAC and have migrated all of my stuff from old to new, except I have a external backup drive on the old IMAC and did not migrate it. I thought that I would migrate by attaching it to the new but do not have the right cables. Can I connect the backup drive to the old with the firewire that I have and connect the old IMAC to the new one with the cables that I used, or do I have to buy the right connector to connect the backup to the new IMAC.
Thanks

http://support.apple.com/en-us/HT5872 Move your data to a new Mac
Setting-up a new Mac from an old one, its Backups, or a PC

Time to create a dissolve New iMac v Old G4

Similar Messages

Maybe you are looking for