Time to enhance music
OK, I have been using Apple products for almost 8 years and i havent found any simplest change to the audio quality over these years. Apple you got to think on this front as well/ Why not give a dolby digital output from the i devices etc or any other outstanding sound quality that will make i devices stand apart higher- you were successful cause of music afterall....
Make a suggestion to Apple here:
Apple - iPod touch – Feedback
Similar Messages
-
i downloaded an album on itunes using my new itouch; but it's only allowing me to put three songs at any one time into the music app...how can i get it to just move them all in there?
hi philly, thanks for getting back to me, especially on such a busy day.
I don't think that's quite the issue though. I bought an album and it appears in 'my purchases' within the itunes app. Yet, in order to listen to the music, i must use the 'music' app and in this application, there are only three tracks displayed at any one time from my downloaded album.
I can 'download all' from the 'my purchases' section but that still doesn't help, it just keeps the last three tracks downloaded in the music app.
I have the 'icloud' enabled and wondered if it had anything to do with that.
i have successfully downloaded another full album totally into the music app, but this first album is causing me problems. -
Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)
Not via Time Machine. It cannot back up from a network location.
The 3rd-party apps CarbonCopyCloner and ChronoSync may be workable alternatives.
EDIT: And, if you're going to do that, you could back up from the Time Capsule to a USB drive connected to the TC's USB port. Second TC not required.
Message was edited by: Pondini -
When pulling music from a harddrive and it say music can not be found, is there a way to stop this from happening every time I play music on my computer? It used to find all music when serching for song but now it only finds 1 at a time. I have over 2000 songs so I can't go through this every time.
1) However I do not want to move my itunes Music onto the flash drive, only my Movies, and want to keep my music on my hard drive.
Is this possible?
Yes
2) Do the MacBook Air's not have a separate program other than itunes that can play movies? If so, is there a program I can get to solve this problem? I went onto the App Store to see if there was something I could download, but all the apps were for creating DVD's, not simply playing them.
If you can play the movies in iTunes, you should be able to open the movie files using Quicktime, which should already be on your system. If you have already transferred the files to your flash drive, open the flash drive in Finder, and hold control when you click on the movie file (or right click if you have the enabled) and select Open With Quicktime Player. This should play the movie directly from the flash drive.
If you want to set all .m4v files to open with Quicktime by just double clicking on the file, you can follow the steps here: http://www.tech-recipes.com/rx/2573/os_x_how_to_change_default_application_to_op en_file_type/
3) If 1. & 2. questions are solvable, will it then be safe to delete the movies from my itunes?
You can move the TV shows to your flash drive by dragging them from the iTunes window to your flash drive in Finder or the flash drive icon on the desktop. When you are sure everything is transferred over to your external device, you can delete the movie from iTunes. I recommend playing the videos from the flash drive first before deleting them in iTunes.
To delete the videos from iTunes, you can highlight them and press the delete key on your keyboard. In the next prompt, you would want to move it to the trash so that it is deleted from your internal hard drive.
I hope that helps! -
"Loading iTunes Match" showing each time I start Music
Hi,
I've recently had some trouble with iTunes match, where it wasn't downloading songs, although I could stream them fine. I spoke to someone from Apple who suggested turning off iTunes Match, then do a 'Reset All Settings', then re-enable iTunes Match. This seems to work fine, as I can now download songs.
Since performing the above 'reset', each time I start 'Music', it displays 'Loading iTunes Match', the progress bar gets all the way across, then I see my songs (not my playlists though - but that's a separate question). However, if I come out of Music, and go back in, I see the same message..
I've now tried about 10 times, with re-boots and turning off/on iTueHi,
There may a problem track amongst those tracks that are waiting. Firstly, add iCloud status column to song view - go to menu > view > view options and tick box.
Next is to examine those tracks waiting - is there anything unusual or large? You may need to remove all those tracks waiting from your library. Next hold shift key whilst turning off match. Close iTunes, reopen and turn on match. You will be asked to add this computer, do so. The match process should be quick, match will remember previous matches and uploads.
Once process complete, readd those tracks, a small batch at a time. This will help you find any track that match does not like.
Jim -
i have macbook pro running on 10.9.2 every time i download music files and transfare the it duplicates the file is there any way off switching it off please help
Open Automator
Choose Folder Action for type of document
At the top, for Folder action receives files and folders added to, select Other...
in the window that opens, select your Downloads folder, and then Choose
from the Actions on the left, drag Filter Finder Items over to the column on the right
Where it says Any Content, select Kind
Where it says Any, select music
Drag Move Finder Items over to the rightfor To: select other, and navigate to your user folder > Music > iTunes > iTunes Media > Automatically Add to iTunes
it should look like this:
close the window and give the folder action a name. -
HT1904 Every time I download music from iTunes , it always show: download error, please try again
Every time I download music from iTunes , it always show: download error, please try again(i5)
But I can download in my iPadEvery time I download music from iTunes , it always show: download error, please try again(i5)
But I can download in my iPad -
I have the volume control symbol in the enter of my iPad all of the time. My music will not play and when I try to increase the volume manually, it statics and will not maintain a volume level. Thanks
Try resetting the iPad by holding down on the sleep and home buttons until the Apple Logo appears on the screen. Ignore the red slider if it shows up. You will lose no data.
-
Recently, I bought a new laptop (a Lenovo), so I downloaded iTunes to it. When I bought new music from iTunes for the first time on the new computer, I went to my music library and there was no music, except for the new songs I had just bought. I have no idea what happened, I've had hundreds of songs I've bought from iTunes or downloaded from bought CDs over the years, which are all still on my iPod (nano, from 2008), and suddenly they just didn't seem to exist. I have yet to access the iTunes account on my previous laptop to see if my music is still there, but I would assume yes. When I went to sync my iPod to my iTunes to at least get the new songs to the iPod (so that my complete library can be on at least one device), I realized that in order to sync my iPod to my iTunes, I would be deleting all my old music and replacing it with the new. So now, I only have a few new songs on my laptop's iTunes, and only my old songs on my iPod. In both cases I paid for all the music, so I don't want to just delete any of it. Is there any way to fix this?
Also-I tried to use my backup hard drive, but I wasn't able to drag/transfer/send/move any of my muic files onto my iTouch when the iTouch was connected to my computer. I can't figure out why it won't let me do that.
The only thing I can see when I open my iTouch on my computer is my file with photos. I can't see videos, music, or anything else. What's going on? -
Set migration assistant to run whilst on a lunch break, given that it needed 2 hours or so, when i returned all programs and applications had moved across from my time machine backup of a now dead 15"macbook pro 2009 edition running snow leopard...When i look at my new system information it shows my new 500gb drive is full of music, movies and photos and has only 168gb free, not enough to run a new migration and i don't have any boot disks for Lion so really don't want to erase the hard drive. To compound the problem i'm in Vietnam where there isn't a genius bar just around the corner, or even an aasp within 700km - what should I do?
Is the HDD in the 2009 15" MBP dead? (The original source of your data) If not, you might want ot take it out and put it in an enclosure.
You might try spotlight on know files to see if that gives you any clues where your data is located.
You might down load from the Internet OmniDiskSweeper (free) and open it. It should show you all of the files you have on your MBP and enable to locate them.
Ciao. -
I am pretty new to an ipod. I finally got itunes on my computer, was able to download from computer to ipod classic, but somehow ended up with 2 album covers showing 17 times for one and 16 times for the other. I really don't have a clue how this happened or how to fix it. The music it self is not duplicated just the album covers.
1) Plug in your iPod.
2) Wait for an 'iPod' button to appear at the top right corner of iTunes.
3) Open that.
4) Go to the 'Music' tab.
5) Sync music.
WARNING: This WILL delete all your music you had on your iPod prior to this.
To add songs without syncing:
1) Create an iTunes playlist with the songs you wish to add.
2) Repeat steps 1 - 3 above.
3) Go to the 'On this iPod' tab.
4) Select your playlist you just made on the bar at the bottom of the list beside the 'Autofill from...' prompt.
5) Press 'Autofill'. -
MY HUSBAND AND I SHARED THE SAME EMAIL ADDRESS, AT THAT TIME I HAD DOWNLOADED MUSIC TO MY PHONE. I GOT MY OWN EMAIL ADDRESS AND ADDED THAT EMAIL TO THE ORIGINAL ACCOUNT, WHICH ORIGINATED WITH MY HUSBANDS EMAIL.
HOW CAN I GET THE MUSIC DOWNLOADED TO MY IPHONE.nshepley wrote:
I GOT MY OWN EMAIL ADDRESS AND ADDED THAT EMAIL TO THE ORIGINAL ACCOUNT, WHICH ORIGINATED WITH MY HUSBANDS EMAIL.
Please turn off your CAPS LOCK!
How did you "add that email to the original account"?
You changed the AppleID to your new email address? -
I have to WIPE iPod every time I add music to iTunes!
Hi. I seem to have everyone's problem at once.
I've just upgraded to an 80Gb Video iPod after filling up my old 20Gb click-wheel model, which still works as wonderfully as the day I bought it over 4 years ago. My new model is, however, driving me crazy! On first plugging it in, I got the Unknown error -48 that others have described, and was told that I couldn't sync. I updated, I restored, I synced again. Fine - the music was there even though iTunes was still telling me that I had the -48 error. However, every time I add a CD to my iTunes collection and then plug in my iPod, I find that the music is not added. What's more, I'm told that my iPod is synced with another iTunes library and that if I want to sync with this one it will erase all data and start over - this takes several hours and is totally unacceptable.
I also get the flashing 'do not disconnect' sign permanently whenever connected, even if there's nothing being transferred.
Weirdly, if I click on the iPod in my 'Devices' list in iTunes, I find all the menu options changed and grayed out. If I try and select, say, 'sync music' or 'sync movies' I get a message asking me if I really want to do that, since "all existing content on the iPod will be removed and replaced with the contents of your iTunes Library".
I'm a humble Apple fan who's always used Apple and is used to intuitive devices. This experience is demoralising and I'm regretting my expensive and frustrating purchase even after 1 week. Please can someone help? Do I have to send this device back to Apple?At the moment there seems to be no permanent fix for error -48. The Apple fix of erasing the iPod with Disk Utility and restoring with iTunes that is mentioned in various posts appears to work for some and not others. This is the workaround I'm currently using until a reliable fix comes along. Give it a try and it may help with the secondary problems you are also experiencing.
Set up iTunes "not" to open when you connect the iPod.
Enable Disk Use on the iPod
Eject the iPod and shut down iTunes
Reconnect the iPod and open Disk Utility
Click on your iPod in the Utility pane and choose Repair Disk which will find and fix a number of errors.
Close Disk Utility and open iTunes and your iPod should connect and update as usual.
Keep the settings above and each time you connect the iPod to update it run Disk Utility repair as above before opening iTunes. It's far from being a acceptable answer but until a permanent one comes along I've found that it works for me. -
Battery time and enhancement features
Smartphone’s are known for consuming a lot of battery power and depending on your configuration your phone might last longer or shorter than other phones. This topic contains some advice and info about what you can do to increase your battery time.
When using your new Android phone it will take approximately up to a week or so before the phone settles in its battery usage and power management, depending on applications installed and the amount of content in your phone. It’s worth mentioning that this evaluation that the phone runs in the background at first period of use will happen again after master reset or reinstalling/repairing the phone software. So if you have just reset or reinstalled your phone, this power management evaluation process will run again. So it might at first seem like your phone is consuming more battery power than before the reset, but its normal.
If you have been using your phone for a couple of week and still think that the battery time is a bit too low, here’s some advice that will increase the battery time.
First of all make sure that your phone is running on the latest version of the firmware. You can use PC Companion to check for software updates for your phone.
http://www.sonymobile.com/gb/tools/pc-companion/
Or Bridge for Mac if you’re a Mac user:
http://www.sonymobile.com/gb/tools/bridge-for-mac/
You can also check battery consumption via the menu; Settings > About phone > Battery use, or Settings > Battery, or Settings > Power management > Battery.
Things that can be disabled or reduced when you don't need them:
Dim the screen
Disable live wallpaper if used
Turn off 3G (WCDMA), 4G (LTE).
Turn off mobile data traffic
Turn off Bluetooth®
Turn off Wi-Fi®
Turn off GPS
By doing this you will increase your battery time. But if you're still experiencing a low battery time you can try the following as proposed by many users on the forum. (Only applies for phones using removable battery)
When phone reaches 50% in battery level turn it off and pick out the battery for a few minutes. Put it back and connect the charger, now charge the phone turned off for about 5 hours or overnight. Start the phone as normal and check if the battery life time has improved.
You can also let the phone drain the battery completely until it turns itself on and won’t start again.
At this point connect the charger but do not turn on the phone, leave it charging while turned off until the battery indicator on the screen is completely filled.
Also make sure that you’re using a Sony original charger.
Battery enhancement features
Extended standby mode
Use the extended standby mode to make the battery last longer. Your Wi-Fi® connection, data traffic and unused applications are then paused when the phone is in standby. You can still receive phone calls, text and multimedia messages. Once the phone is used again, all paused functions are resumed.
You can enable/disable Extended standby mode via Settings > Power management. (Depending on model)
STAMINA mode
It has already been mentioned a couple of times that Smartphone’s use a lot of power, even when you’re not actively using them. All those app’s that you have on your phone may still be running in the background, draining your battery. STAMINA mode is a further development of Extended standby mode and saves wasted battery drain by recognizing when your display is off and turning off functions you don’t need, while keeping the notifications you want. As soon as you wake up your Android Smartphone, everything is up and running again.
Get only the important notices.
With Battery STAMINA mode, Wi-Fi® and data traffic are disabled during standby, but you still receive incoming calls, texts, and alarms. And since everyone has different needs, you can easily customize which app's you want to receive push notifications from even in standby mode. Facebook notifications on or off? It’s up to you.
The STAMINA mode will constantly re-evaluate your usage and update the expected standby time accordingly.
This standby time will completely vary depending on your own personal usage. You may see that when you first start using your handset, the Standby time will be higher than what is expected after you have used the handset for a few days. This is due to STAMINA mode having no previous usage history to estimate from.
If you have a very high usage level, you may only see a slight improvement between having STAMINA enabled and disabled. STAMINA mode is more effective the more often the display is turned off as this is when the power saving features kick in. If the display is rarely turned off, you may not see much improvement in the battery performance.
You can enable/disable STAMINA standby mode via Settings > Power management. (Depending on model)
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.To turn sound off (and on) try holding the lowest right button (#) for a bit longer time. Works with most phones.
-
How to avoid displaying date,time using Enhancement point.
Hi friends,
i have to work on the standard report.
stadard report displays date,time ,reportname on the top of the page. my requirement is not to display date ,time,reportname.
they have used the following code,
WRITE text-001 TO m_line+d_offset(4). " Time
WRITE sy-timlo USING EDIT MASK '__:__:__' TO m_line+d_offset(08).
WRITE text-002 TO m_line+d_offset(05). " Date
WRITE sy-datlo DD/MM/YYYY TO m_line+d_offset(10).
BY using Enhancement point how to achieve my task.
kindly help mePost Author: jsanzone
CA Forum: WebIntelligence Reporting
basham,
You didn't mention which type of DBMS you are using (i.e. Oracle, MS SQL, MySQL, etc), but in a nutshell using MS SQL here is the principle. Your time that is recorded in the records is dependent upon a setting in your RDBMS. For instance, the RDBMS can use the machine time (which would most likely be local time), or it can use the machine time with an offset (to accomodate GMT, for instance). GMT is factored differently based upon your time zone (and time of year, i.e. DST or EST, etc). I'm on the east coast so right now my offset is GMT - 5, so if my time right now is 1457, then GMT is 1957. To get SQL to compute an offset you must take the number of hours to offset and divide by 24 (24 hours in a day) and add that to the record in the database. For instance, to get GMT right now I would use:
select cast(getdate()5/24. as char(12))rtrim(convert(char(12),getdate()5/24.,8))' GMT'
Hope this helps. If you're on Oracle, then the mathematical principles remain the same, just the formatting will be different.
Maybe you are looking for
-
If a new apple id sign in.what will happen to the old apple id if you erase or reset the phone?
I buy a new iphone 5s and the store open it and put his apple id to download some stuff.. And after that i try to make my own apple id. What will happen if i erase all data and it is in need of apple id.. Will it be the old apple id or my apple id??
-
MDM lookup parameters from File Sender Channel
Hi SDNers, In my current assignment I am required to make an SAP MDM lookup in a JAVA Mapping to fetch certain details to further process the message. Currently the MDM server details along with user id and password are maintained in a properties fil
-
What command can I run to see what ports are being used?
I am trying to connect to citrix and I am receiving a message saying port 999 already in use. How can I fix this? Thanks, JS
-
why when i record my videos using photo booth i watch it and its delayed the people in the video and the sound is not sync together
-
I bought a keyboard that has a midi connection. Is there a cord I can use to connect the piano to the macbook air to use with garageband?