Time Totals for Multiple Songs:

Bought new iTouch, had to update iTunes, now it does not show song time accumulated totals for multiply selected songs. For example, if I select three songs, it does not total a lenght of time for all three songs. But this is what I use iTunes for. Is there a way to change this? Can I go back to my previous iTunes version with my brand new iTouch?
Thank you very much
Mr Ed

So in my worries I searched & searched. I turned on the Status Bar. I didn't notice, but then I saw it fixed my problem & put totals at the bottom.
Amen

Similar Messages

How do I change the start/stop time for multiple songs not just one song at a time?

How do I chnage the start/stop time for multiple songs not just one song at a time?

I don't think you can in iTunes.
Multiple editing in Get Info does not offer an option to change start/stop times.

Ability to Edit info for multiple Songs seems missing in iTunes 12

From a review of this forum, it appears that iTunes 12 no longer permits editing of certain fields for multiple songs.
Formerly, one could select any group of songs and, via using Get Info, edit virtually any field for all songs at the same time.
In iTunes 12 this ability seems missing for certain fields.
Am I missing something or is this highly useful feature now gone?
I can't seem to get a clear picture of this from current forum posts.
Thanks for any comments.

marked as solving problem.
did not mean to do that as use of 3rd party scripts should not be necessary for such a core function in itunes
apple need to restore that basic feature. I will submit a request to them directly.

Time displayed for a Song.

I realize this is not an iTunes probrem perce.
I have a song which plays for like 4 minutes, but the time displayed for the song goes over 36 minutes. Does anyone knows how to correct this?

Download vbrfix here:
http://www.willwap.co.uk/Programs/vbrfix.php
And run it on the file you are having a problem with. It should fix the file so that time is displayed correctly.

Getting run time error for multiple counter plan

Hi Friends,
Its very critical issue,wherein i am getting run time error for multiple counter plan.
Explanation:While try to change the Call horizon or scheduling period of the counter based plan through IP42 or IP15,systam allowing me to change the data but while saving also i am getting "Maintenance plan has changed" message and once come to the back of the transaction instantly i am getting pop up window saying that "Express document get terminated".However we have been maintaining copy of this data in another client wherein we are not getting any Run time error.
Please find the screen shots for your reference and please let me know how to fix the issue.
Regards,
Srinika

Hi,
Please check reason for update termination in Transaction code SM13.

Page wise total for multiple pages in xml template

Hi all,
I need to display page wise total for multiple pages in xml layout.I have tried with add-page-total and show-page-total tags but it is not working in my case.Anyone please provide me a solution to this. Thanks in Advance..It is urgent issue..
Thanks
Swapna

This issue has been resolved.
We had a call to the method "makeOutputFlat(true)" before the call to "FormProcessor.process()" that was corrupting the PDF template file.Once we took that off , the PDF is now printing multiple pages.

Updating info for multiple songs at the same time?

Is there a way to highlight multiple songs and change info for the songs at the same time without having to do it for each individual song? Example: changing the album or the genre for a batch of songs?
Thanks.

Michael,
You can shift-click to make a continuous selection or command-shift to make a discontinuous selection.
Then choose Get Info from the file menu.
Matt

How do I organize my itunes library so that album name only shows up once for multiple song?

When I view the songs in my itunes library, it appears that album names appear multiple times even though they are the same album. (that I may have added to my itunes library at different times).
For example: For U2 album War, there are multiple songs in my library which I downloaded or uploaded in my itunes album at different times. Now the album War under artist U2, appears multiple times. How do I organize and make songs that belong in the same album appear under the album once so when I choose the specific album, all the songs are available there so I can listen to it all or shuffle it within the album. I don't want single songs under the same album names. It is very irritating. Please help to organize my itunes library better, I have a large album and it would be much easier if the album names would appear once when I have multiple songs for that album. Thanks!

Each tune gets a file name - that is how iTunes works. iTunes is a data base manager.
In a PlayList a reference is created that will link to a specific tune.
You can take the tunes that you do not want listed under a particular album name and change the album name using 'Get Info' for that tune(s) from the iTunes window.
MJ

How Do I put in the same image for multiple songs on iTunes

Hi,
I know if I click on the song on "info", I am able to change the album image. Is there a way for me to select multiple songs and do a bulk change with the same image?
Thanks.

Yes.
Select multiple songs, get info and paste the artwork.
Or select multiple songs and drag the artwork to the artwork window at the lower left of iTunes.

One player for multiple songs on webpage. How do I do it?

I have multiple songs listed on a webpage and I'm looking for a way to listen to them without opening a new page eveytime you click on a song. It doesn't have to be a fancy player interface.
Something that allows the viewer to continue reading the contents, of that same page, while listening to their song of choice.
Also, can someone suggest a way to present the songs for listening only, while disallowing the ability to download the actual file?
Thanks,
Keith
G5 Dual 2.5 - 2GB RAM Fireface 800 Mac OS X (10.4.7) Logic Pro 7.2

http://discussions.apple.com/message.jspa?messageID=2739776#2739776
Try the suggestions found on this link.

Time Machine for multiple macs - NAS or DAS attached to my iMac, which I then share?

Greetings
I currently have three macs - MBA, MBP and an iMac (newest generation). I'd like to use Time Machine for all of them.
Is it better to set up a NAS for Time Machine or can I use DAS that I woudl share (external HDD) attached to my iMac if they are all on the same network?
Also, is there any need for something like a Drobo or an external RAID array, if it's mostly for backing up and not for video editing? It would be used as a mnusic server to some degree. I've used a Drobo in the past (2nd gen) and find that I've spent a lot of time troubleshooting and fiddling with it over the years.
Thanks,
John

I am looking to add a Seagate NAS TM compatible to my network. I have 8 TB of storage w multiple Macs that I would like to backup to a NAS device.
Any advice would be welcome.
http://www.seagate.com/external-hard-drives/network-storage/business/business-st orage-8-bay-rackmount-nas/

Patch Setup For Multiple Songs / Digitech GNX 4 (two questions)

Hello,
As per the title this is a two-question question.
1. A little bit of background: I play in a band and I've been using my laptop with MIDI controller since May. My current method is simple and a bit of a jury rig, but it works. We have a repertoire of about 80 songs for which I've created separate GarageBand files for each song containing each sound needed for a tune in a separate recording track. Of late, I've been needing a way to use two controllers to control two sounds and so I've just gotten Logic Studio and have been futzing with MainStage. My question is as follows:
It seems that theoretically I could make one Project file and literally load patches sorted by song for our entire repertoire, but it would cause my computer to be ridiculously slow since I only have 1GB RAM. Because I only have 1GB should I just make separate Project files for each song or is there a way I can load everything in one file without making the computer be slow? I do plan on upgrading the RAM to 4GB if this all works out.
2. I also have a Digitech GNX4. It has a USB port for computer recording and it's worked with Garage Band. Can I assume it will work with the guitar effects of MainStage? (The USB port is broken and since I haven't really needed it, I haven't had it repaired. If the GNX4 does work with MainStage, you can bet it's going to the repair center).
I've loaded some of the guitar effect presets that have like 20+ patches and it takes a long time to load which I'm guessing is tied to only having 1GB RAM.
Thanks for anyone's help.
+My Gear apart from laptop:+
+- M-Audio Keystation 88es+
+- M-Audio KeyStudio 49+
+- M-Audio Oxygen 49 (just bought, arriving tomorrow and will most likely be returning the KeyStudio if it works well)+
+- Digitech GNX4 guitar effects processor+

Right (as MIDI controller). I was speaking about that solely as able to use the amp modeling features of Main Stage.
My RAM should be arriving on Wednesday, upgrading from 1GB to 3GB
I have two MIDI controllers; M-Audio Keystation 88es and Oxygen 61.
My live situation is 95% keys (my various sounds split between the two controllers), and just running my guitar clean direct to amp for the few tunes when I use it (my guitar is a Rickenbacker 360-12). We're starting a few new songs where I'll have to use my six string so that's why I was curious if my GNX4 via USB can, again, use the amp modeling for those few songs. It's on it's way to the repair shop so it'll be a few weeks before I can test it.

Time Synchronization for multiple Arduino

I made a program wherein there are 3 nodes, each node measure temperature using thermocouple. Each node has 1 arduino and 1 Xbee. All the three will send their temperature data to the base station where Xbee exists. What I want to do is All of the data will be placed in chart, it should have time and date. As shown in my VI, and if you see something that I have used incorrectly please do say. I am new to LabVIEW.
How will I synchronize the data? For each and everyone have a time and date? Say, node 1,2, and 3 took a measurement at t=0. Since they all have different location, they will all have a different received time in base station? How can I make them send their data and place the appropriate time for the temperature measurement?
Attachments:
overview.vi ‏64 KB

Serial communication via RS-232 is always one-to-one because there is no addressing capability. The LIFA Init VI does not have any addressing capability so it appears that none of the other communications methods allows more than one device per channel. I think you will need three separate channels (COM ports) for the three devices.
How precisely do you need the temperatures to be synchronized? I would expect that any system using XBEE will not be responding to rapid changes of the temperatures. Just assume that the three readings taken in the same loop are at the same time and append a timestamp or tick count in software. I do not have the Get All Data.vi so I canot tell how fast it executes. I would move the Write to File to a parallel loop and put a Wait in the read loop to set the loop time. For most temperature applications software timing is good enough. What will you be doing with the data?
Lynn

How best to set up multiple time capsules for multiple needs?

There is so much good information on these discussions about using TCs for extenders or external drives - I am hoping to do both so will ask my own question here. BTW, this is my very first post so please be patient with me if I do not include something important.
I have a 1/2 gen (2007) Airport extreme and a 5th gen (2011) 2 tb TC. I am buying a 6th gen (2013) 3 tb TC because I am getting the new Macbook Air and want to take advantage of the new ac wireless. I have 2 apple TVs and 1 iMac plugged directly into my home ethernet network (if I'm saying that right - they are plugged into the wall). We have iphones, ipads, and an old macbook as well that all plug in wirelessly. Below is what (I think) I would like to do in the order I think I would have to do it. Could you help me understand if (a) this makes sense, and (b) if so, how do I accomplish these steps?
1. I unplug the 2 old units (2007 and 2011) and set them aside for the moment.
2. I plug in the new 6th gen TC to my modem and follow set up instructions to make it my backup area for iMac, Air, and old Macbook. I assume I need to do this because I want it to be the primary right?
3. I want to use the 2011 TC as a hard drive - I will be transferring all photos and 2 iTunes libraries (mine and my husband's) to it. We watch lots of movies so that is the main use. I think I would want this plugged directly into an ethernet port in the wall so it will be quickest for Apple TVs to access right? Or would it be better (fastest access) to connect it directly to the new TC or even the iMac? Is there something I need to do to make it an external drive rather than TC?
4. I would also, if possible, like to use the 2011 TC as an extender into a far room in the house. Could I simply plug it into an ethernet port in that room and it magically becomes an extender too? Would this not be ideal for some reason, like it is slower to access? Note that this is not terribly necessary but would be nice if easy.
6. Would it make sense for me to plug in the 2007 unit in a far room upstairs to serve as an extender up there?
Thank you so very much in advance.

There are a few things to get straight..
This is pedantic but heck I post too much..
The Gen of the TC is one behind the Extreme.. so a Gen6 AE = Gen5 TC.
Totally pedantic.. but it keeps me happy.
3. I want to use the 2011 TC as a hard drive - I will be transferring all photos and 2 iTunes libraries (mine and my husband's) to it. We watch lots of movies so that is the main use.
I would like you to rethink this.
You can do it.. but I think you are misunderstanding how iphoto and itunes work.
Your Apple TV never connects to the library of itunes..
And
Your TC is not a media player.
So all files stored on a TC are going to flow like this..
TC(ituneslibrary)---Computer (itunes)---stream---TC(network)----ATV.
If you remove the computer.. then you have nothing.
The TC is not a great place to store the itunes library for the following reasons.
It is slow.. much slower than local hard disk.
It is slow to spin up .. causing itunes issues with losing the library.
It is fast to spin down.. so streams get lost.
It has no backup.. and Time Machine cannot backup network drives. That means one day you will wake up.. TC will be dead.. (they do not last forever so this is 100% certain to happen).. And your library is gone. Apple offer no recovery service.. and it costs a small fortune to recover files.. without any guarantee of success.
iphoto is even worse.. it is strongly recommended NOT TO USE NETWORK to locate the iphoto library. It corrupts easily and a small corruption makes the entire library unreadible.
Since you have imac it is better to use an external drive for libraries.. use the fastest port available and you can afford.. ie Thunderbolt>USB3>FW800>USB2
Only the very latest Macs have USB3 but it kills the earlier USB2 and Firewire. And for many people will be as fast as Thunderbolt which is the tops but uber expensive.
Then the TC serves its correct function as TM backup.
You can share this hard disk to the network if you want other computers to access it.
You can store multiple iphoto or itunes libraries on it.
Follow the specific instructions about sharing your itunes library.
http://support.apple.com/kb/ht2688
http://www.apple.com/au/support/itunes/library/
And your iphoto
http://support.apple.com/kb/HT1198
Most of the rest is fine..
1. Yes.
2. Yes.
4. Yes you can extend with the old TC. Ethernet would be better. You might be mixing up wireless extend with Roaming.. you can use roaming if you have ethernet already available.
http://support.apple.com/kb/ht4260
6. Yes.. you can use a number of units via ethernet as AP points.
5. For another life??

Editing Lyrics for Multiple Songs

is it possible to edit lyrics for more than one song at a time. it is very annoying to right click each song then click the lyrics tab and editing the lyrics in there. thank you!

I assume you mean being able to add the same lyrics to the same song that appears multiple times in your library (album version, live version, etc.)?
I don't think there is a way other than entering something in the search box to narrow the list to those songs only, click the first one, Get Info, Lyrics tab, paste in lyrics, then hitting the NEXT button on the bottom to go to the next track which will open still in the lyrics tab so you can paste again, next, paste, next, paste, etc.
Patrick

Time Totals for Multiple Songs:

Similar Messages

Maybe you are looking for