Time triggered graphics swaps
I have a banner on my site that displays graphics promoting
TV show finales on the days that they happen. Currently I am
updating my banner every morning at 8:00am but that leaves the
problem of having yesterday’s event posted from
midnight-8:00am. I was wondering if there is a way to have images
swap automatically at midnight so that anyone awake at 1:00am or
7:00am will be looking at the correct finale for that night and I
can be sleeping. I am looking for a way to have a time triggered
graphic swap.
OK, that's something.
Now, what type of server side language do you use? You could
also use
Javascript, but that seems silly.
What you're going to do is dynamically load an image
according to the
timestamp.
1.Get Timestamp as variable
2. Feed variable into function that will strip out everything
but the day
3. "suck" the day of the week out and converts it to string
(new variable or
reused timestamp var)
4. <img srce="images/<?php $DAYofWEEKvariable ?>.jpg
Name your images according to the day of the week.
http://us2.php.net/manual/en/function.date.php
HTH,
Jon
"edwheels" <[email protected]> wrote in
message
news:e4vmkj$3pt$[email protected]..
>I was planning in creating a weeks worth or images every
Monday so I would
>have them all ready to go throughout the week.
Similar Messages
-
How to write a time triggered portal service/ schedule a portal service
Hi,
Can some one please provide me with some info/url about how to a create a time triggered portal service i.e., scheduling portal service.
Any help will be greatly appreciated.
Thanks & Regards,
SudhirHi,
see my reply to your post in PortalDevelopment area:
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=249185&tstart=0">https://www.sdn.sap.com/irj/sdn/thread?threadID=249185&tstart=0</a>
Romano -
Time-triggered Ethernet in LabVIEW
I've got a client who potentially wants to use Time-Triggered Ethernet for communication within a system. This is a relatively new protocol, described here.
I remember a few years ago that NI began talking about using deterministic Ethernet with their hardware and software. I've found a few reference to it on ni.com, including this overview. However, this particular technology, if I understand it correctly, is a proprietary NI protocol, and (probably) not the same as the Time-Triggered Ethernet standard.
Does anyone have experience with Time-Triggered Ethernet communication from/to LabVIEW?
Thanks,
DaveT
David Thomson Original Code Consulting
www.originalcode.com
National Instruments Alliance Program Member
Certified LabVIEW Architect
There are 10 kinds of people: those who understand binary, and those who don't.Hi Mnoman,
I actually don't see your post, but amazingly someone REPLIED! Thats some telepathic support. Anyhow, if you could repost your question for the rest of us, that would be awesome.
Regards,
National Instruments
RIO Embedded Hardware PSE
CompactRIO Developers Guide -
Time Machine Graphical Interface Crashing Computer
Not sure when this started happening, but every time I go to the Time Machine graphical interface it freezes the computer.
It appears to be backing up properly, and I can access the files without problems in the Finder.
Has anyone had this same issue, and has anyone found the problem?
Thanks.Not sure when this started happening, but every time I go to the Time Machine graphical interface it freezes the computer.
It appears to be backing up properly, and I can access the files without problems in the Finder.
Has anyone had this same issue, and has anyone found the problem?
Thanks. -
Time-Triggered Network crashing
Hello
I've encountered a problem when trying to use Time-Triggered Network.
My RT hardware are two desktop PC used as ETS targets. They specifications are as follows:
Pentium III 800MHz
two 82550 chipset based network adapter (Intel PRO, but i cant remember
exact name), one for normal Ethernet, and one for deterministic network (both computers connected by crossed cable)
128-256MB RAM
additonally i use another Pentium III as host computer.
My aplication is really simple, one of RT machines generate random
values, and send them to other RT machine. Everything happens in timed
loop.
When i use network-shared variables everything runs smoothly. When i
try to use time-triggered variables, VIs deploy normally, but then one
of RT machines (slave) reboots. Host computer shows synchronisation
window (connecting, 0% progress) and after a few minutes announces
time-out. Rebooting RT target show unhandled exception error in a
moment before reboot, but its really hard to read exception code (it
happens too fast, it is something like 0xC00(few zeroes here)05)
I have also tried to use old AMD K6 computer as RT machine (i am aware
that it is far below requirements) and in this case there is no reboot
but still synchronization isn't happening.
Another strange thing is that my VIs worked correctly for one time (no
reboot, synchronisation done normally), but it happened only once and
naver happened before and after. If i remember correctly i've been
deploying VIs normally, just as usual.
Where lies the problem?
Thanks in advance
Jan KienigThanks for reply
I've made few VIs from scratch and rebooting occurs every time. They
are basically the same (generating random value and sending it to
another machine) but they differ in details (ie. i've used timed loop
once and normal loop other time). When i use network-shared variables
instead of time-triggered variables everything runs normally.
In a few days (maybe tomorrow) i'll post my VIs and get exact code of
exception that is causing reboot (i have it in lab, and i am posting
from home). Maybe it will help to clarify the situation.
Jan Kienig -
Long Load Times on Graphic Intensive Games
I'm experiencing some absurdly long load times (1-3 hours) with many games (SPORE, Portal, X:3, etc...) that I believe may be related to how graphically intensive they are. Older games with lower graphics quality (WoW, Civ 4, etc...) load up fine.
When I load any newer game the icon appears in the tray and the computer does nothing else for at least an hour, whereupon the program loads and begins playing immediately--often without any further delays or issues.
I also use Boot Camp to run Windows Vista (Ultimate 32) and experience no delays when running SPORE on Windows.
Below are my specs:
Hardware:
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version: 1.9f4
Serial Number: QP7121Q** <Edited by Moderator>
Network:
Bluetooth:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
Has IP Assigned: No
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
Exclude Simple Hostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Built-in Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Proxy Enabled: No
FTP Passive Mode: Yes
Gopher Proxy Enabled: No
HTTP Proxy Enabled: No
HTTPS Proxy Enabled: No
RTSP Proxy Enabled: No
SOCKS Proxy Enabled: No
Ethernet:
MAC Address: 00:17:f2:d4:e8:98
Media Options:
Media Subtype: Auto Select
Built-in FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
Exclude Simple Hostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:19:e3:ff:fe:81:ea:7a
Media Options: Full Duplex
Media Subtype: Auto Select
Software:
System Software Overview:
System Version: Mac OS X 10.5.3 (9D34)
Kernel Version: Darwin 9.3.0
Boot Volume: MacintoshHD
Boot Mode: Normal
Computer Name: emeldi
User Name: Mike (mike)
Time since boot: 1 day9:05
ATA:
ATA Bus:
MATSHITADVD-R UJ-85J:
Capacity: 423.4 MB
Model: MATSHITADVD-R UJ-85J
Revision: FCQ5
Serial Number:
Removable Media: Yes
Detachable Drive: No
BSD Name: disk1
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Mac OS 9 Drivers: No
Partition Map Type: Unknown
S.M.A.R.T. status: Not Supported
Volumes:
SPORE:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
BSD Name: disk1s0
Mount Point: /Volumes/SPORE
Volumes:
disk1s0:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
Audio (Built In):
Intel High Definition Audio:
Device ID: 0x83847680
Audio ID: 23
Available Devices:
Headphone:
Connection: Combo
Microphone:
Connection: Internal
Speaker:
Connection: Internal
Line In:
Connection: Combo
S/P-DIF Out:
Connection: Combo
S/P-DIF In:
Connection: Combo
Bluetooth:
Apple Bluetooth Software Version: 2.1.0f17
Hardware Settings:
emeldi:
Address: 00-17-f2-be-d3-95
Manufacturer: Cambridge Silicon Radio
Firmware Version: 3.1965 (3.1965)
Bluetooth Power: On
Discoverable: No
Requires Authentication: No
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
Requires Authentication: Yes
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Documents
Requires Authentication: No
When other items are accepted: Ask
When PIM items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Devices (Paired, Favorites, etc):
JabraBT125:
Name: JabraBT125
Address: 00-1a-45-81-c4-f6
Type: Headset
Services: Headset, Hands-Free unit
Paired: Yes
Favorite: Yes
Connected: No
Manufacturer: Cambridge Silicon Radio ($3, $978)
Incoming Serial Ports:
Serial Port 1:
Name: Bluetooth-PDA-Sync
RFCOMM Channel: 3
Requires Authentication: No
Outgoing Serial Ports:
Serial Port 1:
Address:
Name: Bluetooth-Modem
RFCOMM Channel: 0
Requires Authentication: No
Diagnostics:
Power On Self-Test:
Last Run: 6/22/08 3:50 AM
Result: Passed
Disc Burning:
MATSHITA DVD-R UJ-85J:
Firmware Revision: FCQ5
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media:
Type: CD-ROM
Blank: No
Erasable: No
Overwritable: No
Appendable: No
FireWire:
FireWire Bus:
Maximum Speed: Up to 400 Mb/sec
Graphics/Displays:
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
ROM Revision: 113-xxxxxx-139
EFI Driver Version: 01.00.139
Displays:
iMac:
Display Type: LCD
Resolution: 1680 x 1050
Depth: 32-bit Color
Built-In: Yes
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display Connector:
Status: No display connected
Memory:
BANK 0/DIMM0:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x2CFFFFFFFFFFFFFF
Part Number: 0x3136485446313238363448592D3636374433
Serial Number: 0xDB086DDD
BANK 1/DIMM1:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x2CFFFFFFFFFFFFFF
Part Number: 0x3136485446313238363448592D3636374433
Serial Number: 0xDB086DDC
Power:
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 15
Sleep On Power Button: Yes
Automatic Restart On Power Loss: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: No
Hardware Configuration:
UPS Installed: No
Printers:
Lexmark All In One:
Status: Idle
Print Server: Local
Driver Version: 1.1.3
Default: Yes
URI: usb://Lexmark/Lexmark%20All%20In%20One?location=1d120000
PPD: Lexmark All In One
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Lexmark All In One-1:
Status: Idle
Print Server: Local
Driver Version: 1.1.3
Default: No
URI: usb://Lexmark/Lexmark%20All%20In%20One?location=3d120000
PPD: Lexmark All In One
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA:
Intel ICH7-M AHCI:
Vendor: Intel
Product: ICH7-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
WDC WD2500JS-40TGB0:
Capacity: 232.89 GB
Model: WDC WD2500JS-40TGB0
Revision: 20.06C04
Serial Number: WD-WCANY2508218
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
MacintoshHD:
Capacity: 232.57 GB
Available: 11.26 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Volumes:
disk0s2:
Capacity: 232.57 GB
Available: 11.26 GB
Writable: Yes
File System: Journaled HFS+
USB:
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x27cc
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Built-in iSight:
Version: 1.84
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Micron
Product ID: 0x8501
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c9
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x3d
USB Hub:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: OEM
Product ID: 0x0061
Vendor ID: 0x043d
Lexmark All-in-One:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Lexmark
Product ID: 0x0069
Vendor ID: 0x043d
All-in-One:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Lexmark
Product ID: 0x0060
Vendor ID: 0x043d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27ca
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x5d
USB Multimedia Keyboard:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: ALCOR
Product ID: 0x9462
Serial Number: Au9462
Vendor ID: 0x058f
USB RECEIVER:
Version: 25.10
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0xc50e
Vendor ID: 0x046d
USB Multimedia Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: ALCOR
Product ID: 0x9410
Serial Number: Au9462
Vendor ID: 0x058f
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c8
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x1d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27cb
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x7d
Bluetooth USB Host Controller:
Version: 19.65
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple, Inc.
Product ID: 0x8206
Vendor ID: 0x05ac (Apple Computer, Inc.)
IR Receiver:
Version: 1.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer, Inc.
Product ID: 0x8240
Vendor ID: 0x05ac (Apple Computer, Inc.)
AirPort Card:
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x14E4, 0x87)
Wireless Card Locale: USA
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.170.46.7)
Current Wireless Network: ACTIONTEC
Wireless Channel: 9
Firewall:
Firewall Settings:
Mode: Limit incoming connections to specific services and applications
Services:
File Sharing (AFP): Allow all connections
Printer Sharing: Allow all connections
Applications:
com.apple.iChat: Allow all connections
com.apple.ODSAgent: Allow all connections
com.aspyr.empireatwar: Block all connections
com.RealNetworks.RealPlayer: Allow all connections
Locations:
Automatic:
Active Location: Yes
Services:
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
PPP:
ACSP Enabled: No
Display Terminal Window: No
Redial Count: 1
Redial Enabled: Yes
Redial Interval: 5
Use Terminal Script: No
Dial On Demand: No
Disconnect On Fast User Switch: Yes
Disconnect On Idle: Yes
Disconnect On Idle Time: 600
Disconnect On Logout: Yes
Disconnect On Sleep: Yes
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: Yes
LCP Echo Enabled: No
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: No
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:17:f2:d4:e8:98
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
FTP Proxy Enabled: No
FTP Passive Mode: Yes
Gopher Proxy Enabled: No
HTTP Proxy Enabled: No
HTTPS Proxy Enabled: No
RTSP Proxy Enabled: No
SOCKS Proxy Enabled: No
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:19:e3:ff:fe:81:ea:7a
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
AirPort:
Type: IEEE80211
BSD Device Name: en1
Hardware (MAC) Address: 00:19:e3:df:5e:9b
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
IEEE80211:
Allow Net Creation: Yes
Disconnect On Logout: No
InterferenceRobustness: 0
Join Mode: Automatic
JoinModeFallback: Prompt
MAC Address: 00:19:e3:df:5e:9b
PowerEnabled: 1
PreferredNetworks:
SecurityType: Open
SSID_STR: ACTIONTEC
Unique Network ID: F0FA7942-54E7-409B-A1CA-10B05F3B2EDE
SecurityType: WPA2 Personal
SSID_STR: D Pad
Unique Network ID: A391D57D-A4EC-4B2E-B741-0D6569BD77AB
Unique Password ID: 404D3742-17AA-4C24-A229-7E37725522EA
SecurityType: Open
SSID_STR: linksys
Unique Network ID: FD2A5229-348A-4E90-B4E2-48E4DE62C394
SecurityType: Open
SSID_STR: M and M
Unique Network ID: D980D42A-E76C-4A68-920D-AAC9537C26C9
SecurityType: Open
SSID_STR: default
Unique Network ID: 5A2D9117-3263-46B9-952D-A4463BA5F377
SecurityType: Open
SSID_STR: Sweet Lou's **** Shack
Unique Network ID: FA247542-1EF4-41B6-A242-688E75C85B57
RememberRecentNetworks: 1
Ethernet Adaptor (en2):
Type: Ethernet
BSD Device Name: en2
Hardware (MAC) Address: 00:01:23:45:67:89
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet Adaptor (en3):
Type: Ethernet
BSD Device Name: en3
Hardware (MAC) Address: 00:10:32:54:76:98
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Volumes:
net:
Type: autofs
Mount Point: /net
Mounted From: map -hosts
Automounted: Yes
home:
Type: autofs
Mount Point: /home
Mounted From: map auto_home
Automounted: Yes
Universal Access:
Universal Access Information:
Cursor Magnification: Off
Display: Black on White
Flash Screen: Off
Mouse Keys: Off
Slow Keys: Off
Sticky Keys: Off
VoiceOver: Off
Zoom: OffThat's old info for the HDD space--I've purchased an external, so my main drive stays plenty free, now.
-
Getting last login dates and times for graphical/xwindows logins?
Hi,
How do I get the last login date and times for users who just use the GUI (and don't launch terminals)?
So far such logins don't seem to show up when I do "last -f /var/adm/utmpx" or for wtmpx.
What should I be using on solaris to get the last login dates and times for all users, whether they log in on the text console, graphical console, or remotely via ssh etc?
Thanks,
Link.Hi,
How do I get the last login date and times for users who just use the GUI (and don't launch terminals)?
So far such logins don't seem to show up when I do "last -f /var/adm/utmpx" or for wtmpx.
What should I be using on solaris to get the last login dates and times for all users, whether they log in on the text console, graphical console, or remotely via ssh etc?
Thanks,
Link. -
GUEST Account Time Triggering after first login In WCS
Hi,
I just need to know that is WCS capable of creating guest account in a way that the starting time line can be triggered after first login
ThanksHi,
I just need to know that is WCS capable of creating guest account in a way that the starting time line can be triggered after first login
Thanks -
Down Time When we swap Cloud service Staging and Production
Hi Team,
Any one help me to know.
What will be the downtime while we doing the VIP Swap of Staging Production environment (Cloud service - web role / worker role)?
Cloud service in Production down time.
Thanks in Advance.Because of update domains, if you have more instances for your roles, each role's instance that is part of one update domain will be updated during that update domain's update, so there is absolutely no downtime.
-
Hard time figuring graphic card upgrade....
I have a Mac PPC G5 2GHz dual, bought new in mars 2006. I have a hard time figuring out what graphic cards I can use.
In Mactracker the graphic card specifics shown are for G5:s built late 2005 which allow Nvidia Geforce 6600 LE (which I also have now), Geforce 6600, Geforce 7800GT and Quadro FX 4500. Does not say anything about PCI or PCI-E.
Can I use PCI-E cards or only PCI? When I search for the 7800GT card it seems is is only a PCI-E available. And when I view hardware on my computers graphics/displays the 6600 LE is shown as a PCI card (not PCI-E).
The one I want to buy is ATI RADEON X1900 G5 Mac Edition 256MB. It is a PCI -E card.
If I cant use PCI-E cards, what cards would u recommend?
Appreciate all help.
ThanksHi-
Welcome to Discussions!
The dual core G5 (late 2005) is PCI express graphics.
The ATI Radeon X1900 G5 Mac Edition is PCI express.
You can use the X1900, just as you wish!
Here are some benchmarks. -
Timer triggers, setDaemon
Hello,
I am wondering how reliable/clusterable repeating timers are using
the weblogic.common.time package are. I would want to start
a recurring daemon which runs on an hourly or daily basis, which
begins when the server starts up.....But I don't need every
server in the cluster necessarily to run the timer function,
but I need to be sure that one of them does, in the event
that any server fails, etc....Alternatively, it would be manageable
to just have all the servers execute the timer action, but not
as desirable....
Can I initialize a timer object from a startup class?
I saw reference in a previous thread to a setDaemon method.
Is this documented somewhere?
Jason
Jason Rosenberg
SquareTrade
(remove 'nospam' from my return address)Are there known plans in the works for J2EE to support functionality
present within the WebLogic services? Especially time services and
JMS connection pooling?
Jason
Michael Girdley <[email protected]> wrote in message news:396a5edf$[email protected]..
>
>
Our focused for clustering features is primarily centered on J2EE. Until a
timing service becomes part of those J2EE platform, it will be at a lower
priority.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Jason Rosenberg <[email protected]> wrote in message
news:396a44a5$[email protected]..
Ok, I'll just have them running by default on each server....
Any plans to make them clustered?
Jason
Michael Girdley <[email protected]> wrote in message
news:396a43c1$[email protected]..
Timers are not a clustered service.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Jason Rosenberg <[email protected]> wrote in message
news:[email protected]..
Hello,
I am wondering how reliable/clusterable repeating timers are using
the weblogic.common.time package are. I would want to start
a recurring daemon which runs on an hourly or daily basis, which
begins when the server starts up.....But I don't need every
server in the cluster necessarily to run the timer function,
but I need to be sure that one of them does, in the event
that any server fails, etc....Alternatively, it would be manageable
to just have all the servers execute the timer action, but not
as desirable....
Can I initialize a timer object from a startup class?
I saw reference in a previous thread to a setDaemon method.
Is this documented somewhere?
Jason
Jason Rosenberg
SquareTrade
(remove 'nospam' from my return address) -
Swap two Images at the same time
I have a roll over button that works fine. I'd like to create
a "disjointed rollover" and have another image on the page swap out
at the same time. When I add the second swap image behavior it does
change but the newly swaped image stays visable onMouseOut. I did
check the "restore image onMouseOut" box but It seems as if the
first swap Image restore is canceling out the second? Help,
thanks.Here's one of your images that is triggering the swap -
<td width="77" height="45"><a href="#"
onMouseOut="MM_swapImgRestore()"
onMouseOver="MM_swapImage('jeremy_wariner','','images/recent/24_jeremy_wariner_2.jpg',1)" ><img
src="
http://www.danielericwilson.com/drea/images/recent/24_jeremy_wariner.jpg"
alt="jeremy wariner" name="jeremy_wariner" width="77"
height="45" border="0"
onMouseOver="MM_swapImage('textarea','','images/24_jeremy_wariner_text.jpg',1)"
onMouseOut="MM_swapImgRestore()"></a></td>
Note that you have applied the swap image behavior BOTH to
the image AND to
the anchor wrapping the image. That's not the right thing to
do. Change
this code to the following -
<td width="77" height="45"><a href="#"
onMouseOut="MM_swapImgRestore()"
onMouseOver="MM_swapImage('jeremy_wariner','','images/recent/24_jeremy_wariner_2.jpg','te xtarea','','images/24_jeremy_wariner_text.jpg',1)"><img
src="
http://www.danielericwilson.com/drea/images/recent/24_jeremy_wariner.jpg"
alt="jeremy wariner" name="jeremy_wariner" width="77"
height="45"
border="0"></a></td>
Note that I have moved the onmouseover event and its
associated javascript
call from the image into the anchor tag. Now, the swapimage
restore will
restore both images onmouseout.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Cakes808" <[email protected]> wrote in
message
news:gph7hm$631$[email protected]..
> The site still very rough but heres the link. Thank you
for your time in
> checking this out.
>
>
http://www.danielericwilson.com/drea/
> -
Need to restrict triggering of workflow only once(first time).
Hi guys,
I hv a requirement to trigger the workflow only once(first time).
whatever is the the condition/changes in document, it should not trigger for second time.
do we hv any options available for this........
thanks in advance...
santosh.Hi susan,
Below is the requested information,
Release : ECC 6.0
we are working on custom WF for ECO creation(CC01).
Description,
ECO is created in SAP by legacy system, thru bapi CCAP_ECN_CREATE, the WF will take the editing of the material in that ECO to different departments like MRP, accounting, sales,quality etc.... & respectively creates the views.
we cannot use CREATE event, bcos first the ECN(CC01) is created by bapi & further bapi creates the material & inserts it into ECN again, which is CHANGING the document. once this is done, our WF should trigger.
As we dont have CHANGE event in ECM BO, i am using CREATE event & settting it for ON CHANGE in SWEC t-code.
Bottomline is , it is triggering as soon as any changes happens.
But, we want it to restrict for one time triggering.
Regards.
santosh. -
Process Chain Triggers Multiple times
Hi All,
I have Meta process chain say ZAAA which has multiple Local Chains example ZBBB , ZCCC and ZDDD. .This Local chain ZCCC trigger multiple times of in one day . we had a issues today with deactivation of Transformations and DTP in different levels because of that Local Process chain ZCCC is failed along with other process chains . when I reach to ZCCC started by repeat or repair ,before Local Chain ZCCC finished whole process ,ZCCC triggers second time .
Now first times triggered process chain ZCCC is in yellow , and second time triggered process chain ZCCC gone through all the way to gree , and Meta chain showes red.
what I have do make Meta chain green.
Regards
HariHi Hari,
I wonder what you mean by below statement:
one of the sub pc still yellow first time trigger and went to red and second time trigger whole process is green. all Sub PC are green
For the sub pc mentioned above, you trigger it all over again? Or you repeat/repair the step failed?
If you trigger it the second times all over again it is a new run and the first run remain fail,ed so the meta chain will never get green, if you want to make the meta chain green, you need to repeat/repair the step failed in first run.
Regards
Bill -
Time way off when using Motion graphic. Huh?
Maybe I should ask this in the Motion discussions but you guys will most likely have the answer.
I am lost on this one. If I creat a graphic in Motion and say I have an element come in at 4 seconds all looks fine. But when I export a movie for use in FCP X, the element comes in at 2 seconds. This happens with all elements. What on earth am I not getting here?
Just tried something else. It is not just on export. If I time the graphic with a stop watch, it does not match the timeline. I guess what I am saying is that the timeline in Motion is correct but playback is way slower. What don't I understand?
Thanks for any help.
Cheers.
TomYes, you should ask this in the Motion forum. You might want to check the project settings and the frame rate settings and also the export settings.
The second part may be that that playback in Motion is not always at real speed, but is dependent on the speed of your processors and whether the playback range is held in cache.
Maybe you are looking for
-
It's been about three weeks since I was able to connect my phone to itunes. When I connect my phone to my computer, it will show up on the desktop, and I can sync my photos, but itunes doesn't recognize it. I've tried removing and downloading itunes
-
why are the setting of the gif are NOT there (publish form) how can i make my gif in better resolution cos it comes out really low res now
-
Internal Charges Calculation Error status 03 & Charges disaapearing after FO creation
Hi Experts, I have done following Config & data set up for Internal Settlement (Forwarding Order) while I intent to do Inter Company settlement. (I am using TM9.0 SP01 version) In Movement Type Stage sequence set to "No Rule" for internal Settlement.
-
Communicationcation Channel Error
Hi, my Communication Channel is not working fine.. so i check that in RWB it was showing some Error message <b>Channel is an Internal Error</b> previously it was worked fine.. but now it was showing this error message .. for what reason we wi
-
hi, I am trying to setup a guest WLAN using a local controller and a controller in my DMZ using the mobility-anchor configuration. Ideally I'd like to use an external DHCP server in my DMZ, but for now, I'd be happy getting the local DHCP server on