Time Verification Settings

Dear PM experts,
I am having a problem with Work Orders, Notification and Time Confirmation(IW41) settings.
In the SAP system there are two times: System Time and the Time Zone Time which are different from each other.
In Work Order : Malfunction data the Malfunction Start Time and End Times are verified using the Time Zone time. Same issue in Order confirmation : Work Starts on and Work Ends on Times. and Order/Notification creation Times.
So is there a way to solve this issue without changing the Time Zone?
Can we change the Time Verification/Default settings and set them to System time?
Regards,
Thushantha

Hi..
When I create a Notification/Order the system takes the Time Zone Time (for creation Date / Time).
Also for all the Malfunction Start/End Times it checks the validity against the Time Zone Time.
Say if the Time Zone Time is 06:00:00 and System Time is 09:00:00 then
The Notification/Order Creation Time is taken as 06:00:00
if Malfunction Start/End is given as 07:00:00 it fires an error message - "Downtime entered is in the future"
I'm not using any User exits for verification they are default verifications.
My question is how to change these default time verification settings in Notification / Orders ...
Regards,
Thushantha.

Similar Messages

  • Time Verification and Settings

    Dear Experts,
    I am having a problem with PM Work Order/Notification Time settings.
    In the SAP system which Iu2019m using there are two times: System Time and the Time Zone Time which are different from each other.
    When I create a Notification/Order the system takes the Time Zone Time (for creation Date / Time).
    Also for all the Malfunction Start/End Times it checks the validity against the Time Zone Time.
    Say if the Time Zone Time is 06:00:00 and System Time is 09:00:00 then
    The Notification/Order Creation Time is taken as 06:00:00
    If Malfunction Start/End is given as 07:00:00 it fires an error message - "Downtime entered is in the future". I'm not using any User exits for verification they are default verifications.
    My question is how to change these default time verification settings u2026
    Regards,
    Thushantha.

    Hi..
    My Issue was solved in the PM forum:
    Iu2019m adding the solution for your references:
    Subject: Re: Time Verification Settings
    Message: hi
    in the user profile there is a option to set the user time zone, DO NOT specify anything there hence system will take the system time only .
    kindly check that
    regards
    thyagarajan
    regards,
    Thushantha.

  • Is there a capability to save/export the time capsule settings file when using the iphone/ipad airport utility. the "file" button does not exist on the latest airport utility app.

    is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.

    the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
    Sounds like you are a bit confused with version numbers.
    Latest AirPort Utility version for the iPhone / iPad is 1.3.3.  There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
    AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x.

  • Why is a network share not showing up in time machine settings when on the wifi?

    Hi all,
    I am currently trying to set up time machine for my Macbook air. I have connected an external harddrive to the network router and made it available as a network share. I have both read and write access to the drive, when mounted as a an SMB volume and while connect to the network via Wifi. However, when opening time machine settings and trying to select the backup volume, the network drive doesn't show up.
    What's wrong?
    Kind regards,
    Martin

    Time Machine cannot backup to a SMB network volume.
    Time Machine may also have problems backing up to AFP volumes on some network attached storage devices (NAS).

  • Why does the sound stop after about 10 minutes? I like to listen to lectures, etc. and find it very annoying to have to press the on/off button to restart it every 10 minutes. Couldn't find a way to extend playing time in settings.

    I like to listen to lectures, etc. and find it very annoying to have to press the on/off button to restart it every 10 minutes. Couldn't find a way to extend playing time in settings. Any suggestions? This is my first iPod and I am ready to take it back if I am unable to extend the playing time. Frustrating!

    Rosapeas wrote:
    I like to listen to lectures, etc. and find it very annoying to have to press the on/off button to restart it every 10 minutes. Couldn't find a way to extend playing time in settings. Any suggestions? This is my first iPod and I am ready to take it back if I am unable to extend the playing time. Frustrating!
    I can imagine that is frustrating as heck.  My daughter has one of these and I know for a fact hers does not turn off after 10 minutes because I have to turn it off for her every night after she has fallen asleep.  Below is what Apple has to say about it from a troubleshooting standpoint.
    "If music stops when the iPod nano screen turns off m Make sure the earphone port is free of debris. m Make sure the earphone or headphone connector is pushed in all the way. To see an illustration, go to support.apple.com/kb/ts3700."
    Are you using aftermarket ear buds or speakers when you listen to these lectures???  If so maybe it has something to due with a compatibility issue.

  • SAP PORTAL Time-Out Settings / BO iView Reports..?

    We have created BO object-specific iView requests in SAP PORTAL based on Ingo's posting....
    SAP BusinessObjects Enterprise & SAP Enterprise Portal - Part 3 of 4
    Currently, just posting some small CR4E and Analysis for Office (*Design Studio will be added in a few months) report objects that are based on BW queries - and response time is a few seconds.
    However, long-term as our BW grows - and the volume of data/periods expands we may see some reduction in the performance of these reports, and they make take a few-minutes to return data.
    The SAP Portal team already have an issue with an ECC / T-Code report (*no Business Objects involved) which runs over 100 seconds - and hits a Portal time-out....and are wondering if we would hit the same issue if a CR4E within the Portal ran longer than 100 seconds...?
    I think the answer is "NO", the Portal time-out would not apply in that scenario. My assumption is that in our solution-path, the Portal's 100 second time-out rule would ONLY apply to the process of the Portal invoking the iView request - and opening the frame for the CR4E content.
    Once the frame is open - and the RPT / Prompt-Screen is loaded the Portal time-out is "happy".
    After that iView -> BO frame is established....so, even if the CR4E & BW Query took more than 100 Seconds to return/display the data - the SAP Portal would not time-out - as all of that activity is actually taking place at the BOE Platform layer within the frame (and using the time-out settings at the BOE level).
    Can anyone confirm that my assumptions are correct, or explain where the assumption is wrong..?
    Thanks in advance...!

    In our scenario, the SAP PORTAL has a 100 second time-out, but the Business Objects platform where the CR4E content is hosted has a 600 second time-out for "View on Demand" reporting.
    When the SAP PORTAL opens the iView connection, it is opening the CR4E content in a frame on the Portal. Prompts are entered - and the RPT execution begins on the BOE platform.
    There is a "spinning-wheel" displayed from the BOE platform, and if run in BO LaunchPad it could run for up to 600 seconds before a time-out occured.
    When it is presented in SAP PORTAL via iView connection - does that "spinning-wheel" from BOE Platform provide enough of a "heartbeat" to let the PORTAL know not to drop the connection at 100 seconds....?
    My reasoning is that SAP PORTAL should be opening the BOE content with the same rules that apply when the report is opening in the BO LaunchPad.
    We are going to create a "SLOW" report in CR4E (*Lots of charts & sub-reports) to test/compare LaunchPad and Portal display of the same report.

  • Why do I get iMessage failed update date and time in settings

    My iphone5 keeps changing it time zone on it's own and I keep getting a notification in messages saying iMessage failed update your date and time in settings.  I have update it several times and it's keep doing it.  Now it's just frustrating.  How can I take care of this problem for good. 

    I have also been getting the message ever since I got my iPhone 5 on September 12.  I have to reboot the phone to fix the problem or turn the "Set Automatically" off and then back on. This is a glitch likely with Apple's iOS software, but my Verizon store said that have received numerous complaints on this issue, but no patch has been released for it as of yet.

  • How to change time out settings in Analytic Provider Service...

    ... or how to disable automatic disconnect between APS and essbase server (using XMLA interface).
    First a short summary:
    We would like to use a third party product to analyze data (DeltaMaster from Bissantz). This product uses the XMLA interface provided by Analytic Provider Service. Mostly the connection works, I can choose one of our cubes, sometimes a drill down is possible, but sometimes the following error occurs:
    "Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: (1042006): Network Error [10061] Unable To Connect To [entwgdw.hres.de:33769]. The client timed out waiting to connect to the Essbase Agent using TCP/IP. Check youer network connections. Also please make sure that Server and Port values are correct [...]"
    I have already talked to the Bissantz support concerning this issue and the recommended me to increase the APS time out settings and/or to disable the automatic disconnect between APS and essbase server after every query.
    The question is: Is this possible and if yes: How and where can I change these settings???
    Kind regards
    André

    You could look at updating the essbase.properties file in the APS installation directory.
    olap.server.netRetryCount=600
    olap.server.netConnectRetry=3
    olap.server.netDelay=200
    olap.server.netSocketTimeOut=200
    Update then restart APS
    Though this might not be the issue if on windows, it may be down to the amount of ports being used, have a read [here |http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html ] for a possible fix.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Digital Signature and Time Stamp Settings

    Would someone please tell me the location in which the Digital Signature and Time Stamp Settings from Adobe STD 10 are saved?

    They are saved in the registry on Windows and in the plist on Mac. In Windows you would go into HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\10.0\Security\ and look around there. On the Mac it in /Users/<user name>/Library/Preferences and then look for com.adobe.Acrobat.plist
    Steve

  • Current best practice for Time service settings for Hyper-V 2012 R2 Host and guest OS's

    I am trying to find out what the current best practice is for Time service settings in a Hyper-V 2012 environment. I find conflicting information. Can anyone point me in the right direction. I have found some different sources (links below) but again the
    are not consistent. Thanks
    http://blogs.msdn.com/b/virtual_pc_guy/archive/2010/11/19/time-synchronization-in-hyper-v.aspx
    http://technet.microsoft.com/en-us/library/virtual_active_directory_domain_controller_virtualization_hyperv(v=ws.10).aspx
    http://social.technet.microsoft.com/wiki/contents/articles/12709.time-services-for-a-domain-controller-on-hyper-v.aspx

    From the first link provided by Brian, it does state that the time service should be off, but then the update changes that statement.  Still best to rely on the first link in the OP - it was written by the guy that has been responsible for much of what
    gets coded into Hyper-V, starting from before there ever was a Hyper-V.  I'd say that's a pretty reliable source. 
    Time service
    For virtual machines that are configured as domain controllers, it is recommended that you disable time synchronization between the host system and guest operating system acting as a domain controller. This enables your guest domain controller to synchronize
    time from the domain hierarchy.
    To disable the Hyper-V time synchronization provider, shut down the VM and clear the Time synchronization check box under Integration Services.
    Note
    This guidance has been recently updated to reflect the current recommendation to synchronize time for the guest domain controller from only the domain hierarchy, rather than the previous recommendation to partially disable time synchronization between the
    host system and guest domain controller.
    . : | : . : | : . tim

  • Time Out Settings in OSB

    Hi All,
    I have a service which calls DB via DB adapter. For the webservice call, I have an option of read time out settings in the business service, so that it will get time out after the configured time period.
    But for the DB call I dont have this option in the business service and we are getting stuck thread exceptions when the legacy is taking more time to respond back. We have a requirement that all the services realted to DB call have to get time out when the legacy takes more time.
    Kindly help me in doing this.
    Thanks and Regards,
    Prabhu

    Hi Anuj,
    I did a sample stored procedure which will wait for number of seconds which we send as input and will send the success repose after the number of seconds.
    StoredProcedure:
    create or replace
    procedure sleep (seconds in number,response out varchar2) as testdata number;
    begin
    testdata := seconds;
    dbms_lock.sleep(testdata);
    response := 'SUCCESS';
    end;
    Business Service XML:
    <?xml version="1.0" encoding="UTF-8"?>
    <xml-fragment xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env" xmlns:jca="http://www.bea.com/wli/sb/transports/jca" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <ser:coreEntry isProxy="false" isEnabled="true">
    <ser:binding type="SOAP" isSoap12="false" xsi:type="con:SoapBindingType" xmlns:con="http://www.bea.com/wli/sb/services/bindings/config">
    <con:wsdl ref="Sleep2/Sleep_dbBS"/>
    <con:binding>
    <con:name>Sleep_ptt-binding</con:name>
    <con:namespace>http://xmlns.oracle.com/pcbpel/adapter/db/Application1/Project2/Sleep</con:namespace>
    </con:binding>
    </ser:binding>
    <ser:monitoring isEnabled="false">
    <ser:aggregationInterval>10</ser:aggregationInterval>
    <ser:pipelineMonitoringLevel>Pipeline</ser:pipelineMonitoringLevel>
    </ser:monitoring>
    <ser:reporting>true</ser:reporting>
    <ser:sla-alerting isEnabled="true">
    <ser:alertLevel>normal</ser:alertLevel>
    </ser:sla-alerting>
    <ser:ws-policy>
    <ser:binding-mode>wsdl-policy-attachments</ser:binding-mode>
    </ser:ws-policy>
    </ser:coreEntry>
    <ser:endpointConfig>
    <tran:provider-id>jca</tran:provider-id>
    <tran:inbound>false</tran:inbound>
    <tran:URI>
    <env:value>jca://eis/DB/SleepConnection1</env:value>
    </tran:URI>
    <tran:outbound-properties>
    <tran:load-balancing-algorithm>round-robin</tran:load-balancing-algorithm>
    <tran:retry-count>0</tran:retry-count>
    <tran:retry-interval>30</tran:retry-interval>
    <tran:retry-application-errors>true</tran:retry-application-errors>
    </tran:outbound-properties>
    <tran:all-headers>false</tran:all-headers>
    <tran:provider-specific>
    <jca:jca-file ref="Sleep2/Sleep_db"/>
    <jca:adapter-name>Sleep</jca:adapter-name>
    <jca:adapter-type>DATABASE</jca:adapter-type>
    <jca:always-use-wsdl>true</jca:always-use-wsdl>
    <jca:connection-mode>managed</jca:connection-mode>
    <jca:outbound-properties>
    <jca:operation-properties>
    <jca:operation-name>Sleep</jca:operation-name>
    <jca:spec-properties>
    <jca:property>
    <jca:name>ProcedureName</jca:name>
    <jca:value>SLEEP</jca:value>
    </jca:property>
    <jca:property>
    <jca:name>QueryTimeout</jca:name>
    <jca:value>2</jca:value>
    </jca:property>
    <jca:property>
    <jca:name>GetActiveUnitOfWork</jca:name>
    <jca:value>false</jca:value>
    </jca:property>
    </jca:spec-properties>
    </jca:operation-properties>
    </jca:outbound-properties>
    </tran:provider-specific>
    </ser:endpointConfig>
    </xml-fragment>
    When I run this from the business service, if I give the input as 10, we are getting error only after 10 seconds not in the query time out seconds. But the thing is we are getting error. If we set the time as 11 seconds we are getting success response. But our requirement is the procedure has to time out in the specified seconds. Kindly correct me if I am wrong.
    Regards,
    Prabhu

  • How can I change time machine settings?

    How can I change time machine settings? I only want Time Machine to backup my Home Folders and the items on the desktop. Currently, it's backing up more files which overwhelm my backup drive. How do I get it to back up Home/Desktop ONLY?
    knarfrh60

    Also, see  selecting items to exclude from the backup  here...
    http://support.apple.com/kb/HT1427
    You may also find this Link of interest...
    Time Machine Tutorial

  • Snow leopard Time display ignoring time zone settings??

    I travel a fair bit and found the snow leopard's menu bar time display seem to ignore
    my time zone settings.
    My home base is sydney. and whenever i travel the menu bar time will always show sydney time.
    This is AFTER i've manually changed the time zone setting in sys preferences.
    I tried running istatmenus, it seems to do the same thing (display sydney time).
    any ideas?

    snow leopard's menu bar time display seem to ignore
    Are you using location or manually setting TZ?

  • Can't access Time Machine settings when AirPort (WiFi) is on.

    Problem:
    My iMac (2.66 MHz Inter Core Duo) with 10.5.8 needs an upgrade to Maverick...it is connected to my home network with AirPort
    I have a NAS on my home network (Verbatim MediaShare 2TB) wired connected, which I have had working as a drive for TM-backups. It stopped working with TM about 1,5 year ago, did never figure out why, backups just failed.
    Now I want to get it going again for a fresh backup prior to the OS upgrade.
    The issue I am facing now is that I cant access the settings for the backup drive in TM settings as the AirPort is on.
    I need AirPort on to be able to mount the drive of the NAS, but then I cant access TM-settings. If I switch of AirPort temporarly to access TM-settings the drive which I need to select is dismounted.
    I am kind of stuck. Why is this happening?
    BRG
    /Johan

    BDAqua wrote:
    Got me really confused, sorry...
    Can't access Time Machine settings when AirPort (WiFi) is on.
    the NAS Volume for backup "COMPUTERSBACKUP$" can be mounetd as it should when AirPort is on.
    Hi, label explains the problem pretty much...
    That is: The dialog in TM where the disk for TM to put backuped data is not accessable when the iMac has connection to my home network. The button is there, but when i press it notheing happends. If i deactivate the network interface, the dialog opens.
    I hope this claryfy my problem.
    BRG
    /Johan

  • Time capsule settings in airport utility

    I have a time capsule that I have setup to act as the wireless network for my house and it is also my time machine backup. I know how to protect the data from my backups by protecting the disk that is linked with time machine. However, it seems that anyone who signs on to the time capsules wireless network can (through airport utility) change the settings of the time capsule. I want other people in my house to be able to use the wireless network, but not be able to change settings or create a time capsule back up for their computer. Ultimately I want to be the only one to be able to see any of my time capsule settings in the airport utility. Is there a way I can just set an admin passowrd that is needed to change any settings?
    Thanks for the help, and hopefully this is clear. If not I would be glad to clarify.

    You can change the login password to the TC. That will then lock anybody else out from seeing anything in the TC. They do not need to use airport utility to login to wireless.. Apple make this confusing by using airport to cover both the utility, the routers (at least the airport extreme and express) and local wireless client card being called airport. To make a network connection a client computer just needs to put the TC wireless name and password into the appropiate security box in the airport wireless client setup.. networking in system preference. not the airport utility.

Maybe you are looking for