Time was not correct on dc which is hyper-v virtual machine

My enviroment:
1 physical server dell R720
Role: Hyper-V host
OS: Windows 2008 R2 SP1
Domain: join to domain xx.com
1 virtual machine
Role: DC+DNS+DHCP
OS: Windows 2008 R2 SP1
Domain: xx.com (olny one dc)
Located on: this hyper-v host
Issue:
I found time of virtual machine (this only one dc) was slower than current time. At that moment, time on host machine also slower, and same as dc. When I manual adjust this time to correct. It would go wrong again.
Considering time sync rule of domain and hyper-v, I just unchecked 'Time Synchoniation' on hyper-v intergrate services. Howerver time was slower again after few days.
Could it be possible wrong on hyper-v host which join to domain??
So could you give me some suggestion for this? Thanks in advance.

Hi,
You should not need to disable Hyper-V time synchronization in order to use a different time synchronization source.
" if you are running a Domain Controller inside a virtual machine I would recommend that you leave Hyper-V time synchronization enabled but that you also setup an external time source. You can do this by going to this KB article:
http://support.microsoft.com/kb/816042 and following the steps outlined in the “Configuring the Windows Time service to use an external time source” section. "
Here is a grate article about time synchronization in hyper-v :
http://blogs.msdn.com/b/virtual_pc_guy/archive/2010/11/19/time-synchronization-in-hyper-v.aspx
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

I've installed itunes twice. It worked the first time but after I restarted my computer it kept giving me this message: Itunes was not correctly installed. Please reinstall itunes. Error 7 (Windows error 127). What's wrong?

I've installed itunes twice. It worked the first time but after I restarted my computer it kept giving me this message: Itunes was not correctly installed. Please reinstall itunes. Error 7 (Windows error 127). What's wrong?

See the second box in Troubleshooting issues with iTunes for Windows updates.
tt2

I have a problem with a few emails i wrote which were in the outbox. The outbox disappeared all of a sudden with my mails... However they were not sent since the email address was not correct (just 3 initials). Is there a way to get it back somewhere?

Hello,
I have a problem with a few emails i wrote which were in the outbox. The outbox disappeared all of a sudden with my mails... However they were not sent since the email address was not correct (just 3 initials). I was waiting to find out the correct email address of that person, put in in and then sen it...Is there a way to get it back somewhere on the ipad or in some cached folder?
Many thanks for an answe to this.
Swisslady2

There is no cache where the emails would be stored on the iPad, but you could try quitting the mail app and then launch it again and see if the emails return.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Tap the home button. Then try mail again.

I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

You can solve this problem. Just follow these instructions:
http://support.apple.com/kb/ht1212

Hello. I upgraded my MIFI 2200 (had no contract on it) to a Jetpack (with a contract) when customer service told me this 4G device would use less data because it was faster. This was not correct. Anyway, I got the device, had problems, did tech support

I upgraded my MIFI 2200 (had no contract on it) to a Jetpack (with a contract) when customer service told me this 4G device would use less data because it was faster. This was not correct. Anyway, I got the device, had problems, did tech support, re-activated my MIFI. 1. Decided to return the device. Spent hours with Customer Service, then finally up to Management, they agreed to take it back and void the contact, I sent it back immediately – and instead of voiding the contact they transferred it to my MIFI! Please cancel the contract on the MIFI. 2. During the short time I had the Jetpack I continually received overage alerts, took it all the way up to 30 GB, each time I backdated the new data plan except twice when customer service did and failed to back date the increase, and once the computer locked customer service out and could not increase. The end result is I have a $495 bill, many of these alerts were false since I ended up with only 14 MG for the month, etc. I am asking that my bill be reduced significantly to reflect no overage and to compensate for these problems. Please open up a ticket for this.

I had Verizon JetPak and you will find it will eat data like crazy. I opted to sign on to ATT Uverse and configured my phones and other devices to the WiFi on the Uverse system. It took about 5 minutes to completed the configuration. I was using 10 to 12 GB monthly to support 5 devices. Even if you use Verizon DSL, you are still subjected to same GB allotment. In my area, Verizon DSL is not available. With Uverse, I have 250 GB monthly to use, and I have not even come close to using anything of that magnitude. I reduced my GB package with Verizon to 2 GB per month and since having ATT Uverse, I never use more than 1GB a month with Verizon.
I have no problem with Verizon cell phone service as we get a much stronger signal where we live than you can with ATT or any others. It is just my opinion, but if you are running multiple devices off Verizon Jetpak, you will eventually spend a fortune to keep pace. I pay $60 a month for 18 Mbps speed, although ATT have packages that cost much less. But, it saves me a bundle each month. The cost of Uverse alone is worth not having to run everything through a Jetpak.
If you have the option to use another DSL service provider in your area, I recommend dumping the Jetpak and sign on with another carrier.

Hello I bought Lightbox4 but it was not compatable with XP which was on my computer so I bought Wind

Hello I bought Lightbox4 but it was not compatable with XP which was on my computer so I bought Windows 7 now it works fine, I also have Photoshop Elelements 11, I was using CS3 which I like very much, I have just tried tore- download it again and the message I have is that the Installer is corrupt, is there anything I can do? I can not afford to buy it again can you help?

You can download legacy versions from here:
Direct Download Links for Adobe Software
Just make sure you are obeying the correct install order - older versions must be installed before newer stuff, i.e. your CS3 must be installed before LR4 and PSE 11. in fact your corruption error could be just that - the CS3 envcountering stuff it doesn't understand because it is newer than itself.
Mylenium

Getting error while creating a new web app saying "The password supplied with the username domainname\username was not correct. Verify that it was entered correctly and try again"

Hi ,
I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username was not correct. Verify that it was entered correctly and try again".
I tried running this command also "stsadm -o updatefarmcredentials -userlogin <domain\username> -password <newpassword>" but when it got executed it showed me "Access Denied".
What should i do ??
Thanks in advance.
Regards, Anurag

HI,
right click on command icon and click run as administrator then use above stsadm commend to update credential. If still you face same issue then try with powershell as mention in below link: (make sure that you open sharepoint powershell as run as administrator)
http://smartrider.wordpress.com/2010/07/15/powershell-script-to-create-web-application-and-site-collection-in-sharepoint-2010/
let us know your result
Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

Sharepoint server issue:: Register Managed Account -Password supplied with username was not correct

when i am creating a managed account from share point server admin it is showing:-
The password supplied with the username fimservice was not correct. Verify that it was entered correctly and try again.
i have put correct password but even though it is showing this error.
i have even tried to enter username with my domain name like indialab1\fimservice but this account is not being
recongnized.
Thanks for your help

Additionally you can follow / refer steps mentioned in
http://blogs.technet.com/b/seanearp/archive/2011/01/25/updating-passwords-on-sharepoint-2010.aspx
Let us know your results
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Itunes writes off $ 1 each time they connect to the Internet. Shopping at the time was not. For what? How do I know?

Itunes writes off $ 1 each time they connect to the internet. Shopping at the time was not. For what? How do I know?

Itunes writes off $ 1 each time they connect to the internet. Shopping at the time was not. For what? How do I know?

TS3212 I continue to try to install iTunes; when I attempt to open the newly installed iTunes, I receive errors that it was not correctly installed. I have followed the direction on this website, but I face the same error. Please help.

I continue to try to install iTunes; when I attempt to open the newly installed iTunes, I receive errors that it was not correctly installed. I have followed the direction on this website, but I face the same error. Please help.

latest message indicates I need Apple Application Update
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Create Protection Group Hyper-V Virtual Machines Not Listed

Hello,
We are in the process of testing DPM 2012 R2 and we are trying to backup our Hyper-V virtual machines on both cluster hosts and stand-alone Hyper-V hosts. We have deployed the DPM agent to all cluster hosts and the stand-alone hosts, but when we go
to create a protection group, we do not see Hyper-V Virtual Machines listed under "HyperV". We are expecting Virtual Machines to show up as shown in Step 7 of this guide: http://blogs.technet.com/b/kevinholman/archive/2013/11/07/dpm-2012-r2-quickstart-deployment-guide.aspx.
We have DPM 2012 R2 UR4 installed and Hyper-V role is enabled on the DPM server.
Is there something extra we need to do or something we are doing wrong?
Thank you.

Gleb,
Thank you for your help. For our cluster, we realized we weren't seeing any VM's under the Cluster Node because an agent was not installed on our of the Hyper-V hosts in the cluster. As for the stand-alone Hyper-V host and the cluster node listing
within the "Create New Protection Group" wizard, it looks like MOST of the VM's have the "Backup Using Child Partition Snapshot" option, but no longer show as "Online" or "Offline". I believe this is due to the
way the Hyper-V backups are done w/ DPM which was changed either in R2 or one of the Update Rollups.

How to find out whether a program is running in Hyper-V virtual machine or not?

If I want to make a program which only running in Hyper-V virtual machine, how can I find out whether
the program is running in Hyper-V virtual machine or not?

https://gallery.technet.microsoft.com/scriptcenter/Determine-if-a-computer-is-cdd20473
http://social.technet.microsoft.com/wiki/contents/articles/942.hyper-v-how-to-detect-if-a-computer-is-a-vm-using-script.aspx
http://www.grouppolicy.biz/2014/01/how-to-target-group-policy-to-virtual-computers/
Mike Crowley | MVP
My Blog --
Baseline Technologies

Hyper v virtual Machines should have installed integrated services or not ?

Hi
In my prodcution found hyper v virtual machines have no integrated services was installed should we installed on production servers is any impact if we didnt installed them.
if it should installed then what is the best approch to installed.
Thanks

You posted in the Group Policy forum...
That's a good question for the Hyper-V forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverhyperv
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

May I know how to update preinstalled iPhoto in MacBook Pro?I was not given the password which was required for updating.

I need to update my preinstalled iPhoto in my MacBook Pro, how ever i was not issued with the password needed for updating.

AppStore software and the free iLife included on new Mac's is copy protected and can only be updated or reinstalled (free) by the original owner.
If you bought the machine used or a "open box", the original owner should have wiped the Macintosh HD partition and just reinstalled OS X, but many don't do that or what occurs is the store reinstalls OS X free and then free iLife using their AppleID.
So when it comes time to update it, you can't because you have a different AppleID and password.
It's terrible hassle with all this mega-copy protection shenanigans because it allows someone to sell you a used Mac with tons of software for more money you later can't update for security issues and compatibly with newer OS X versions.
So you can either to choose to use it as is, or wipe and reinstall OS X and then buy a copy of the software, then it will be in your name.

Time is not correct in CME even though it is right on the router it runs from

Hi all,
We have a 2911 that is running CME on top of. The router time is correct but within the CME GUI it is one hour fast. I checked all the setting with timezone and others and it seems to be correct.
In the GUI i tried to change the time and it will just revert whenever I hit apply. I enabled the setting that allows change time in GUI.
Please see attached
any suggestions would be greatly appreciated.

Hi,
I did enter the time-zone info under the telephony-service configuration mode. just to be sure i did it again.
same effect, the router from cli will display the correct time, the phones will display the correct time, but if you goto http://routerip/ccme.html and click on system the time is 1 hour faster.
unity which syncs time from this router (set as ntp master) will also have timestamp 1 hour fast.

Time was not correct on dc which is hyper-v virtual machine

Similar Messages

Maybe you are looking for