Time Zone/Daylight Savings Conflict between Windows 7 and Illustrator CS6

When Daylight Savings did its change this spring I started having problems saving files in Illustrator. I will go to save files, mainly .eps format, and it crashes Illustrator. I have changed my time zone to a zone that has not switched yet due to Daylight savings, and it works. Unfortunately as I find a new time zone, it also ends up hitting Daylight Savings, and I am back to square one. I have been searching both the Adobe site and the Windows site to find an answer to my problem, but am having no luck.
My proper time zone is
(UTC-07:00) Mountain Time (US & Canada)
I have even tried using Saskatchewan as they do not follow Daylight Savings, but it also creates crashes. I have tried many other time zones, the two that have worked so far are
(UTC-06:00) Guadalajara, Mexico City, Monterrey (worked for a little while but a time change a few weeks later messed it up)
(UTC) Casablanca (working on this time zone now, but an alert on my computer says time change coming up on the 28th)
Does anyone know if there is a fix to this problem? I feel like I am running out of time, as I am not sure how many more time zones will work.

I have finally found the solution!!! My account is set up as an Administrator, yet for some reason Illustrator was not opening with Adminsitrator permissions. I have to go into my startup menu, right click on Illustrator, and open as an administrator. Suddenly, everything works faster, smoother, and properly! I don't understand the reason behind this, but at least it is working proper now.

Similar Messages

  • Linking and updating between photoshop and illustrator cs6

    Im having trouble with linking my files from photoshop to illustrator on a mac.
    Im using CS6 and it used to work fine, I'm not sure if I disabled a option somewhere but now It doesn't update the files when I make changes.
    For example if I'm making a change in photoshop and saving it, It should ask me to update in illustrator but it doesn't

    @SP/RAA
    Jean posted perhaps the best solution for your problem.
    A template is an Illustrator document for startup. You can create a document...place all the colors you want to the Swatches panel....insert contents to symbol, brushes, graphic styles and so on. Then you can go File > Save as Template.
    Now...when you want to start a new document..you could File > New from Template. Then new document will have all the stuffs of the template, including other specifications like rulers viewed...guides...
    But even using template you cannot update a batch of documents...The template is only a document for start...and it does not keep linked to new documents based on it.
    Or you try via script (do not know how further it would help) or try the alternative given by Jean.
    Gustavo.

  • How can I resolve conflict between itunes and Windows 8.1

    When downloading itunes to my laptop computer, using Windows 8.1 my email/network account will not work on that computer.  It is fine on other devices such as ipad and Windows phone.  I can also pick up emails on online on the same laptop.  There appears to be a conflict between itunes and Windows 8.1

    Please see  Boot Camp for comments.

  • [JS CS3] Conflict between palettes and panels

    Hello,
    I am having a conflict between panels and palettes. Hopefully I can get some direction without having to copy the code here, because it is very long.
    I have a window of the palette type. This palette has buttons and radio buttons. The buttons call up various functions.
    The radio buttons, however, make visible/invisible a series of panels in the palette. The panels are stacked upon each other, only one of which is visible at any one time, depending upon which radio button is selected.
    One of the buttons in the palette calls up another palette (which also has a series of buttons for various functions). Let's call it the little palette. The problem is, that after the little palette is called up, the radio buttons in the big palette no longer work. I can select them but they will not make visible/invisible any of the stacked panels. The buttons in the visible panel work as well as all the other buttons that are always visible. The only thing that does not work are the radio buttons.
    My only workaround is to just dismiss the palette and call it up again. But I'd rather fix this bug.
    Any ideas? If I need to I can strip down the coding leaving only the essentials, but rather not take the time if this is a problem others have run into and hopefully have a solution for.
    Thanks,
    Tom

    Thanks.  I'll give it a try, but I even uninstalled both programs, tried
    reinstalling Reader only, and when that didn't work, uninstalled Reader and
    then reinstalled Acrobat.  Still a problem.  The particular website is
    www.officeally.com, and it opens the PDF file in a browser window, I believe
    using an ASP file.
    Larry

  • Share iTunes libraries between Windows and MAC

    Hi all i've an wifi via "Base AirPort" i've an HD shared between MAC and Windows sistem via the BASE, the iTunes library that i've stored in the HD is non redable for iTunes on Windows because it need an *.itl file...
    How can i share an iTunes library between Windows and MAC???

    I would like to report back that after struggling for months to get Tune Ranger to work that it is complete rubbish. The first time I tried to sync my libraries (between an empty iTunes library and my existing one) it created duplicates all over the place in my library and generally made a huge mess of everything. The support person (who I suspect is the only person over there) gave me some guff about my id3 tags being corrupt but it was clear that every song that appeared in a playlist was getting duped. Once I fixed this (many weeks later) I tried a one way sync after fiddling with the preferences of Tune Ranger to try to make it work, but it simply wouldn't.
    I don't know if anyway has had success using TR where they are also trying to sync playlists, but if you have, I would certainly like to know what you settings are.

  • Error while trying to synchronize audio and MIDI.  Sample rate 42804 recognized.  Check conflict between Garageband and external device.

    Sometimes, while playing back my software instrument songs, I get an intermittent pop-up error message, saying "Error while trying to synchronize audio and MIDI.  Sample rate 42804 recognized.  Check conflict between Garageband and external device."
    (Sometimes the five digit number is different, but remains a five-digit number beginning with "4".)
    Simultaneously, the song stops until I press the "Okay" button in the pop-up window.
    When I continue to play the song, the sound is jerky and clipped, and the playhead doesn't keep up with the song, and then suddenly jumps to the part of the song currently being played.
    There's also a sound of static.
    The issue seems to occur whether or not I have my MIDI controller turned on and plugged into my desktop Imac.
    Tony

    Hello,
    open your Audio MIDI Setup utility and set the input to 44100
    https://discussions.apple.com/message/12710638#12710638

  • 2-way Trust Relationship between Windows and Mac Domain

    Hi guys I hope someone can help me.
    Just a quick explanation of what I am trying to do.
    I have an Xserve running OSX 10.5.8 server, which is the OD Master. On that server I’m running Kerio mail server. I have a Microsoft 2003 server running AD.
    The problem is I need to run BlackBerry Enterprise on the Windows server as the BlackBerry need active directory to work.
    Since I have both system already running, I do not want to destroy my open directory just to get the BlackBerry working.
    So what I have tried to do is create a 2-way Trust Relationship between the 2 domains, so the BlackBerry server will talk to the Kerio mail server.
    The trust relationship appears to create fine from the Windows server side, but I’m not able to retrieve LDAP information from the open directory server.
    The creation from the OSX server starts fine automated but then I had to finish it manually.
    Has anyone else here created a 2-way trust relationship between Windows and Mac’s before? Any help on how you did it would be appreciated. Thanks

    Have you checked on when the computer last checked in and changed the computer account password with the domain?  When a computer changes it's password, Active Directory will store only the current password and it does not expire.  The workstation
    will store both the current password and the previous password.  This for cases when you may restore Active Directory to a point before the computer password change.  
    To handle this, the workstation will try it's current password, then it's previous.
    If you're restoring the workstation to a previous point in time, you may be rolling the stored passwords back too far for Active Directory to accept.  I would only imagine this to be the case a handful of times if you're going back 1-2 days.
    Are you experiencing 100% failure?

  • Software conflict between iPhoto and Sony MP3 player

    I am experiencing a major software conflict between iPhoto and my Sony MP3 player (model: NWZ-E443). In the past, whenever I connect the MP3 to my 2009 MacBook Pro, iPhoto always opened. I would simply close iPhoto and everything would be OK, though. But after upgrading iPhoto a few months ago via an upgrade download I am now unable to view images full-screen. Although thumbnails display OK, when I double-click on any of them to display full-screen, the MP3's 'Do Not Disconnect' image displays full-screen instead, even when the MP3 is not connected.
    I have tried reinstalling iPhoto from the original iLife disc, but this didn't work and my fear is that the Sony software has somehow corrupted every image single file in my library.

    Turns out my Mac put code on the mp3 player because after I reset the mp3 player to its 'factory settings', (erasing everything) it went back to normal and now shows up in the finder window.

  • Conflict between VPN and Airport disk

    Hello Folks, I just bought a brand new airport extreme 802n.
    I thought it would be working fine with my Macbook pro, but it doesn't.
    I can't access any externe hard disk or USB Stick through the airport extreme, although the format is FAT32. I checked and checked but found nothing useful. All the settings are default.
    Worth to mention, I always use a cisco VPN client to get connected to the Internet (university student).
    There are few times when I disconnected the VPN Client, the USB Client can be found and read, but not be written.
    I though it is a conflict between VPN and Airport disk. So I tried without VPN, but the USB stick and the extern hard disk still didn't work properly. I have no idea what is happening could somebody help?
    By the way is it possible to set Airport extreme as a VPN router so I don't have to use the cisco VPN client anyway?
    Any reply is appreciated
    Thank you !

    I have an Airport Extreme connected to a cable modem
    with comcast as my isp. The Extreme is connected to
    a G4 dual processor mac via ethernet. I also have 3
    airport expresses around the house to work as range
    extenders. When I had the G4 connect to the Extreme
    via its internal airport card, I had no difficulty
    connecting to any of the Expresses around the house
    with my g4 powerbook. Now that I have the G4 Dual
    directly connected by ethernet to get the fastest
    speed, I cannot get my expresses or my laptop to
    connect through my laptop to the base station. all
    lights are green on the expresses, but running
    network diagnostics on the powerbook shows red or
    yellow for the last two buttons on the right. Do I
    have a configuration problem or an Extreme that won't
    bridge properly?
    Check that the G4 Dual has a location configured with
    only "Built-In Ethernet" activated, and that its
    Ethernet connection isn't shared on AirPort.
    Turn off all your AX and check that your
    PB G4 is able to connect to "your" AirPort network.
    Take advantage of this silence of all your AX
    to run an analysis of your wireless environnement:
    - check that you don't have any neighbor wireless
    network,
    - check that on each of your AX settlement you have a
    very good reception of "your" AirPort network.
    If everything works fine to that point, add one AX to
    your network, and check the reachability of your network
    where you wanted to extend it.
    dan    

  • Time Zone...When changing date and time.

    After having updated to version 10.6.1, I am still experiencing the same top sites glitch as everyone else. However, is anyone else's time zone graphics funky (missing squares?) and really unresponsive when moving across the earth from side to side?

    For me - I am pretty anal about keeping my camera's time accurate, and I always adjust time on import to the correct time zone if I am shooting in a different area (I live in AZ time, and when I shoot on the east coast i set the time zone to eastern on import). So I doubt I would ever use that feature.
    If you ever do need this feature, be aware that the date and time displayed in the Adjust Date and Time dialogue box are the date and time in the time zone your computer is set to, not the time zone the picture was taken in.
    So if you have a picture taken on the east coast and you open the adjust date/time dialogue, you will see the time for the picture in AZ time (a few hours earlier than the time displayed in the Image Date field). To set the time for the picture, you have to figure out what time it was in AZ when the picture was taken, and enter that time.
    After playing around with this I've filed it as a bug with Apple. Even if they aren't going to let you change the time zone (functionality I think is needed), they should at least consistently use the same time zone with a picture, rather than forcing you to do time zone conversions by hand.

  • Name space conflict between static and instance method

    Hello,
    there seems to be a very unfortunate name space conflict between static and instance method name. Consider:
    static String description() that should return a description of a class.
    String description() that should return a description of an instance.
    That seems to confuse the compiler. How come? Static and instance methods don't have anything to get confused about.
    Thanks for any insights :-)

    Umm...jeez.
    It's not a bug, it's the way it's supposed to be.
    Since a static method can be called the same way an instance method
    A instance = new A();
    A.staticMethod();
    instance.staticMethod();it's not allowed.
    Also in the class, you can call
    public void myMethod() {
          instanceMethodInClass();        // You don't need this, it's superfluous
          staticMethodInClass();          // You don't need the class name.
    }If you didn't understand, then just accept the fact that it is so. Some day you'll understand it.

  • Hi, I need to import contacts from windows outlook to MAC outlook. I need the field mapping document between windows and mac outlook.

    Hi, I need to import contacts from windows outlook to MAC outlook. I need the field mapping document between windows and mac outlook.

    Then I suggest you post your question the Microsoft Mac forums since it's their products you're having trouble with
    http://answers.microsoft.com/en-us/mac

  • Media Foundation Source or H264 / AC3 differences between Windows and Phone 8?

    I've got a working Matroska (MKV) Media Foundation Source for a Windows Store app (PC x86). It will play several different matroska files that contain H264 encoded video and AC3-encoded audio.  It even has seek support.  I've written the app
    as a HTML/typescript Universal app with the MF Source as a C++ dll. 
    The problem is that the same code will not work on Windows Phone 8.  I can play videos that don't require the external MF Source (i.e. MP4 files and AVI files) just fine on both platforms through my app, but the same MKV videos that played on an x86
    PC will not play on Windows Phone 8 (Lumia 920).
    I looked at the specs for the Snapdragon processor and it should be able to support both H264 at 720p resolution and AC3 (2-channel only).  So I don't know what else I need to do to get this to work on WP8.  The audio I'm trying to play is actually
    6-channel, so that made me wonder if it was failing because WP8 supports 2-channel max, but I would have thought the audio just wouldn't work and the video would play normally.
    Does anyone have any suggestions?
    *edit* - just to be more specific, I can parse the file and create the presentation descriptor without errors.  But when I finish opening the file and call the event for that, nothing else happens.  What is weird is that the javascript video player
    never throws the "canplay" event, nor does it throw the "error" event.
    Lee McPherson

    Thanks, not a bad suggestion to try. 
    On my Windows machine, I tried to get the MediaEncodingProfile via the createFromFileAsyc method.  With a known file type, it outputs all properties of the video and audio streams (bitrate, etc).  With an MKV file (container file with H264 video
    and AC3 audio), I only get the type and subtype properties. Everything else is zero or null.  This is because in my MFSource, I only set the type and subtype.  This still allows the video to play on my windows machine.  I assume the
    built-in MFTransform for H264 video-to-uncompressed video parses the stream to get the relevant information.  Likewise for audio.
    On Windows Phone, when querying the file's MediaEncodingProfile, I get the same result. This is telling me that my MFSource will parse the file properly and set the subtypes for video and audio correctly.  Everything else is still null or zero. 
    However, the file does not play.  There is no returned event to the video element that it even *can* play.
    Perhaps, I need to fill in the video and audio stream properties on the Windows Phone version.  I really don't want to because that would mean having to parse some of the underlying video and audio streams themselves, not just parsing the container
    information.  (More work!)  But this is what I mean when I ask about the differences between Windows and Windows Phone... perhaps the WP8.1 & Windows MFTransforms are different? 
    *EDIT* - I do get a JavaScript Console error that I didn't notice before: AUDIO/VIDEO: unknown MIME type.  (VS error code: MEDIA12899)
    Lee McPherson

  • Slow swapping between Photoshop and Illustrator

    I have had this issue for a while now where it takes forever to swap between photoshop and illustrator, even if nothing is on my clipboard.  It also seems like it takes forever for photoshop to display its UI no matter what program I am working in prior to clicking on it on the task bar.  Once I am in the programs, they run fine until I try to save or print, at which point to slow to a crawl again.  It wasn't  always like this, but I had to do a system restore a couple of weeks ago to fix a bad boot file, and now the programs run like crap.  I have noticed that the person who worked here prior to me never uninstalled the previous versions of Design Standard.  So I am just tyring to figure out a way to speed things up because this should not be going this slow.
    My computer specs
    Windows XP Professional
    2.83ghz Quad Core Intel Processor
    4GB RAM (tech  under since XP pro only supports 3.3)
    GeForce 9800 512MB Vid card
    All my drivers have been updated and I did a registry cleaner which did not fix the problem.  So any help would be greatly appreciated!
    Thanks

    Imo, you should establish a rather strict
    color management strategy (examples):
    1. Define in Photoshop:
    RGB: AdobeRGB(98)
    CMYK: ISOCoated
    Gray: Black Ink ISO Coated (Custom profile)
    Spot: Black Ink ISO Coated
    2. Distribute this profile set by Bridge
    3. Convert RGB images in Photoshop to CMYK
    4. Define Color space in Illustrator as CMYK
    5. Open the Photoshop file or the Tiff file in
    Illustrator: here it looks as expected.
    Problems: the CMYK file contains an ICC-profile
    which is different to the global CMYK-definition.
    Now it depends on the CMS strategies, and that's
    the point where I'm usually giving up.
    Best regards --Gernot Hoffmann

  • Difference between photoshop and illustrator effects?

    Under the effects menu in cs5, what is the difference between photoshop and illustrator effects? when do you use the photoshop ones?
    Thank you.

    The Photoshop effects are copies of similar effects from Photoshop. As such, they can only be applied to raster art, such as that edited in Photoshop. When you apply a Photoshop effect the Illustrator art you apply it to is rasterized in the background and the effect is applied to the rasterized version of the art. If you expand the appearance of anything with a Photoshop effect on it it will be rasterized. The other effects retain all or part of the vector art. When you expand the effect or save a PDF at least some of the original vector art will remain as vectors, although some effects (Drop Shadow, Blur, Feather, Inner Glow, etc.) to add rasterized art to the file.
    The rasterization is non-damaging, in that the original vector, type, or other objets remain fully editable. If you remove the effect the rasterization goes away. There is no dialogue for rasterization resolution in the effect; you set that in Effect > Document Raster Effect Settings.

Maybe you are looking for