TimeCapsule 2.4ghz connection VERY slow
For the past several days, any connection to the 2.4Ghz radio on my TC is very slow. Speedtest.net shows .29Mbps download and .34Mbps upload (yes, note the decimal place!). If I switch over to the 5Ghz radio, my speeds increase to 16.03Mbps download and 4.19Mbps upload. Also, when connected to the 5Ghz radio, my laptop is showing a full 4 bars of strength, whereas when connect to 2.4 radio, I am only getting 1-2 bars from the same location.
The TC is connected to my Comcast cable modem - wired connections through the TC are getting 30+Mbps downloads.
I have tried restarting TC, restarting the cable modem, rebooting client machines...
Ideas? is my 2.4Ghz radio dying?
Chances are, your router is just fine and you are picking up some interference on the overcrowded 2.4 GHz band from a cordless phone, other neraby wireless network, or a wireless camera/security system.
I used to have intermittent slow downs and drop outs on my old 2.4 GHz router and never could figure out why. One day at my desk, by accident I noticed my neighbor coming out of his front door talking on his cordless phone wihen my wireless suddenly slowed. When he got to his mailbox on the street, the wireless was down to a crawl.
So, the source of the interference may not necessarily be in your home, although if you have any cordless phones, that would be the first thing to investigate. For more info on the epidemic problem of wireless interference, you might want to look over this document:
http://support.apple.com/kb/HT1365
Or, this thread:
https://discussions.apple.com/thread/2262411?threadID=2262411&tstart=0
Similar Messages
-
Wireless N connection very slow
I was running my wireless router at home (internet through Comcast) in mixed mode (b/g/n), and noticed that my S3's download speed when on the wireless seemed very slow. I confirmed this using speedtest.net (the android app) and saw a very big difference between the S3 on the wireless router and my laptop. I tested my wife's laptop and S3 as well, with the same results. (The laptops consistently got 20Mbps down while the S3s both got around 1.8Mpbs down.) The 4g LTE speeds were incredible, but since I'm on a data cap now, I can't use that for the majority of what I want to do with the phone.
After some testing, I found that if I disabled N altogether on my router, our S3s connect and get the same speeds as our laptops. Now my router runs only in 2.4Ghz band, and I have not had a chance to test my N connection on a 5Ghz band. For whatever reason, the Verizon version of the S3 does not have a setting where you can tell the phone what band to connect to, but from what I've read it only connects at 2.4. I'm going to try some more testing to see if this is in fact the case or not.
Anywho, I'm now getting good download speeds connecting in mode G, but I'm kind of bummed that Verizon has (surprise surprise) limited the phone in this way. AT&T and Sprint customers I've talked to are able to connect to Wireless N, and though some of them have problems if the band is set in auto mode, if they specifically choose the band their router is running in, it works just fine. Don't get me wrong, I choose to be with Verizon and generally am happy with the service (losing unlimited data notwithstanding), but I just don't understand why they took away the ability to control the wireless connection in this way. Its doesn't make sense.First of all, the speeds you are quoting all sound like Mbps (megabits per second) connection speeds, not data throughput speeds. You really need to measure your actual download speed to tell what is actually going on with your system.
Use speedtest.net and test your system. Turn off all other computers except the test computer. Test under the following conditions:
1) connect one computer, by wire, directly to your modem
2) connect the same computer, by wire, directly to your router
3) connect the same computer wireless to your router
4) connect your other computers, wirelessly to the router, one at a time
Also, state the speed that you are paying your ISP for.
Report your download and upload speeds for all of the above tests.
Note that the speed that you are paying for should be about the same as your results from test 1 and 2 above.
After you have done these tests, it will be much easier to tell where the problem is. -
Adobe Photoshop CC2014 internet connection very slow
Hi,
I'm developing an Adobe Photoshop HTML5 (website) extension. This is working fine in Photoshop CC, but is very slow in CC2014.
Today I've installed an update for Photoshop CC2014 and I was presented with an 'introduction' screen, loaded from the web.
This had the same slowness, indicating my extension is not at fault.
The regular functionality of Photoshop has a normal speed, and I'm working on a recent computer with Win 7 64bit.
I've recorded a video showing how slow it really is (and proof that my internet connection has sufficient speed)
http://videobam.com/gmNun
How can I solve this?
Thanks!
SamJust checked, same problem for other users
This is what's in help > system info:
Adobe Photoshop Version: 2014.2.0 20140926.r.236 2014/09/26:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2693 MHz
Built-in memory: 8097 MB
Free memory: 3404 MB
Memory available to Photoshop: 7084 MB
Memory used by Photoshop: 70 %
3D Multitone Printing: Disabled.
Windows 2x UI: Disabled.
Highbeam: Enabled.
Image tile size: 128K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Display: 2
Display Bounds: top=180, left=1920, bottom=1080, right=3520
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=2112
glgpu[0].GLName="Intel(R) HD Graphics 4600"
glgpu[0].GLVendor="Intel"
glgpu[0].GLVendorID=32902
glgpu[0].GLDriverVersion="9.18.10.3204"
glgpu[0].GLRectTextureSize=8192
glgpu[0].GLRenderer="Intel(R) HD Graphics 4600"
glgpu[0].GLRendererID=1046
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,i gd10iumd32"
glgpu[0].GLDriverDate="20130603000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Build 9.18.10.3204"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447 ]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[80]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[64]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=0
clgpu[0].CLPlatformVersion="1.2 AMD-APP (1124.2)"
clgpu[0].CLDeviceVersion="1.2 AMD-APP (1124.2)"
clgpu[0].CLMemoryMB=2048
clgpu[0].CLName="Hainan"
clgpu[0].CLVendor="Advanced Micro Devices, Inc."
clgpu[0].CLVendorID=4098
clgpu[0].CLDriverVersion="1124.2 (VM)"
clgpu[0].CUDASupported=0
clgpu[0].CLBandwidth=2.56187e+010
clgpu[0].CLCompute=285.525
License Type: Subscription
Serial number: 90970762941485624948
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\Sam\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 153,9G, 88,5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/08/12-23:42:09 79.557478 79.557478
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/09/07-21:07:38 79.558079 79.558079
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 5.2.4
AdobePDFL.dll PDFL 2014/08/18-15:13:12 79.512424 79.512424
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/08/20-09:53:02 79.156797 79.156797
AdobeXMPFiles.dll Adobe XMP Files 2014/08/20-09:53:02 79.156797 79.156797
AdobeXMPScript.dll Adobe XMP Script 2014/08/20-09:53:02 79.156797 79.156797
adobe_caps.dll Adobe CAPS 8,0,0,13
AGM.dll AGM 2014/08/12-23:42:09 79.557478 79.557478
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib.dll AMTLib (64 Bit) 8.0.0.122212002 BuildVersion: 8.0; BuildDate: Wed Jul 30 2014 15:59:34) 1.000000
ARE.dll ARE 2014/08/12-23:42:09 79.557478 79.557478
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/08/12-23:42:09 79.557478 79.557478
BIBUtils.dll BIBUtils 2014/08/12-23:42:09 79.557478 79.557478
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/08/12-23:42:09 79.557478 79.557478
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
igestep30.dll IGES Reader 9.3.0.113
imslib.dll IMSLib DLL 7.0.0.154
JP2KLib.dll JP2KLib 2014/06/28-00:28:27 79.254012 79.254012
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/08/18-23:43:19 79.557676 79.557676
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.2
Plugin.dll Adobe Photoshop CC 2014 15.2
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.2.0.46
PSArt.dll Adobe Photoshop CC 2014 15.2
PSViews.dll Adobe Photoshop CC 2014 15.2
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 8.0.0.14
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 15.2 (2014.2.0 x001)
Accented Edges 15.2
Adaptive Wide Angle 15.2
Angled Strokes 15.2
Average 15.2 (2014.2.0 x001)
Bas Relief 15.2
BMP 15.2
Camera Raw 8.6
Camera Raw Filter 8.6
Chalk & Charcoal 15.2
Charcoal 15.2
Chrome 15.2
Cineon 15.2 (2014.2.0 x001)
Clouds 15.2 (2014.2.0 x001)
Collada 15.2 (2014.2.0 x001)
Color Halftone 15.2
Colored Pencil 15.2
CompuServe GIF 15.2
Conté Crayon 15.2
Craquelure 15.2
Crop and Straighten Photos 15.2 (2014.2.0 x001)
Crop and Straighten Photos Filter 15.2
Crosshatch 15.2
Crystallize 15.2
Cutout 15.2
Dark Strokes 15.2
De-Interlace 15.2
Dicom 15.2
Difference Clouds 15.2 (2014.2.0 x001)
Diffuse Glow 15.2
Displace 15.2
Dry Brush 15.2
Eazel Acquire 15.2 (2014.2.0 x001)
Embed Watermark 4.0
Entropy 15.2 (2014.2.0 x001)
Export Color Lookup Tables NO VERSION
Extrude 15.2
FastCore Routines 15.2 (2014.2.0 x001)
Fibers 15.2
Film Grain 15.2
Filter Gallery 15.2
Flash 3D 15.2 (2014.2.0 x001)
Fresco 15.2
Glass 15.2
Glowing Edges 15.2
Google Earth 4 15.2 (2014.2.0 x001)
Grain 15.2
Graphic Pen 15.2
Halftone Pattern 15.2
HDRMergeUI 15.2
HSB/HSL 15.2
IFF Format 15.2
IGES 15.2 (2014.2.0 x001)
Ink Outlines 15.2
JPEG 2000 15.2
Kurtosis 15.2 (2014.2.0 x001)
Lens Blur 15.2
Lens Correction 15.2
Lens Flare 15.2
Liquify 15.2
Matlab Operation 15.2 (2014.2.0 x001)
Maximum 15.2 (2014.2.0 x001)
Mean 15.2 (2014.2.0 x001)
Measurement Core 15.2 (2014.2.0 x001)
Median 15.2 (2014.2.0 x001)
Mezzotint 15.2
Minimum 15.2 (2014.2.0 x001)
MMXCore Routines 15.2 (2014.2.0 x001)
Mosaic Tiles 15.2
Multiprocessor Support 15.2 (2014.2.0 x001)
Neon Glow 15.2
Note Paper 15.2
NTSC Colors 15.2 (2014.2.0 x001)
Ocean Ripple 15.2
OpenEXR 15.2
Paint Daubs 15.2
Palette Knife 15.2
Patchwork 15.2
Paths to Illustrator 15.2
PCX 15.2 (2014.2.0 x001)
Photocopy 15.2
Photoshop 3D Engine 15.2 (2014.2.0 x001)
Photoshop Touch 14.0
Picture Package Filter 15.2 (2014.2.0 x001)
Pinch 15.2
Pixar 15.2 (2014.2.0 x001)
Plaster 15.2
Plastic Wrap 15.2
PLY 15.2 (2014.2.0 x001)
PNG 15.2
Pointillize 15.2
Polar Coordinates 15.2
Portable Bit Map 15.2 (2014.2.0 x001)
Poster Edges 15.2
PRC 15.2 (2014.2.0 x001)
Radial Blur 15.2
Radiance 15.2 (2014.2.0 x001)
Range 15.2 (2014.2.0 x001)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.2
Ripple 15.2
Rough Pastels 15.2
Save for Web 15.2
ScriptingSupport 15.2
Shake Reduction 15.2
Shear 15.2
Skewness 15.2 (2014.2.0 x001)
Smart Blur 15.2
Smudge Stick 15.2
Solarize 15.2 (2014.2.0 x001)
Spatter 15.2
Spherize 15.2
Sponge 15.2
Sprayed Strokes 15.2
Stained Glass 15.2
Stamp 15.2
Standard Deviation 15.2 (2014.2.0 x001)
STL 15.2 (2014.2.0 x001)
Sumi-e 15.2
Summation 15.2 (2014.2.0 x001)
Targa 15.2
Texturizer 15.2
Tiles 15.2
Torn Edges 15.2
Twirl 15.2
U3D 15.2 (2014.2.0 x001)
Underpainting 15.2
Vanishing Point 15.2
Variance 15.2 (2014.2.0 x001)
Virtual Reality Modeling Language | VRML 15.2 (2014.2.0 x001)
Water Paper 15.2
Watercolor 15.2
Wave 15.2
Wavefront|OBJ 15.2 (2014.2.0 x001)
WIA Support 15.2 (2014.2.0 x001)
Wind 15.2
Wireless Bitmap 15.2 (2014.2.0 x001)
ZigZag 15.2
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash: NONE
Installed TWAIN devices: NONE -
Lumia 920 Facebook connection very slow over WiFi ...
Since the Portico update the connection to Facebook both in the People and Me hub as well as in the Facebook app is very slow over WiFi, whilst still good over 4G/LTE (with WiFi off). The connection to the Nokia account also appears to have a similar problem. All other accounts and apps have good speed over both cellular and WiFi connections.
Any ideas anybody?
PS: FYI, a bit more info about the history and context: When I noticed the problem the first time after the update, I tried to solve it by deleting and re-adding my Facebook account on the phone. Unfortunately, that made me lose my Me hub tile, so I decided to do a full reset. That again unfortunately got stuck on the togg wheels, so I restored the phone using Nokia Care Suite with the latest firmware, and restored my accounts, apps and settings from scratch. Everythings seems to work fine now, except the above mentioned Facebook and Nokia account connectivity problem.Did you somehow solve this problem?
I have the same issue here with my Lumia 920.
However I have already found out that it only applies to my home Wifi. All other Wifi networks i was connecting to did work flawlesly.
I need to note that all other devices on my home network are using facebook without a glitch. Only Lumia has some problems with it. -
2.4GHZ clients very slow speeds with AP3600
5508 WLC (7.5.102)
AP36021
We currently have a test WiFi SSID setup that uses basic mac filtering on our WLC's
WLAN is configured with WPA and WPA2 L2 Security with WPA Policy and WPA2 Encryption.
For some reason we seem to be getting very slow speeds on clients with 2.4GHZ
for example speedtest.net I get 70mg upload and 65mg download on 5GHZ devices and about 1-3mg download and 1mg upload for 2.4GZ devices!
AP36021 are dual band with 4 channels (2 x 2.4Ghz and 2 x 5Ghz)
fyi - There are no dropped packets on the client stats via Prime mgmt that use 2.4GHZ
Any ideas here?Foreign Primary WLC (let me know if you need the Anchor controller ouput as well)
We have 3 ports configured as 0/12 trunked
interface GigabitEthernet0/12
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
load-interval 30
no cdp enable
channel-group 3 mode on
spanning-tree portfast
end
Building configuration...
Current configuration : 330 bytes
interface Port-channel3
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
logging event trunk-status
logging event bundle-status
load-interval 30
end
AP switch port config
Building configuration...
Current configuration : 617 bytes
interface GigabitEthernet4/32
description AP36021
switchport
switchport access vlan 30
switchport mode access
switchport voice vlan 20
load-interval 30
speed auto 10 100
wrr-queue bandwidth 5 90 5
wrr-queue queue-limit 5 80 5
wrr-queue random-detect min-threshold 2 70 100 100 100 100 100 100 100
wrr-queue random-detect min-threshold 3 70 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100
wrr-queue cos-map 2 1 0 1 2 4
wrr-queue cos-map 3 1 3 6 7
no snmp trap link-status
mls qos trust cos
no mdix auto
spanning-tree portfast
end
show wlan 4
WLAN Identifier.................................. 4
Profile Name..................................... WLKPV
Network Name (SSID).............................. WLKPV
Status........................................... Enabled
MAC Filtering.................................... Enabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status
Radius Profiling ............................ Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Local Profiling ............................. Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
--More-- or (q)uit
Number of Active Clients......................... 21
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 7200 seconds
User Idle Timeout................................ Disabled
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... hellotest
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ new-byod
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
PMIPv6 MAG Profile........................... Unconfigured
PMIPv6 Default Realm......................... Unconfigured
--More-- or (q)uit
PMIPv6 NAI Type.............................. Hexadecimal
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
--More-- or (q)uit
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Framed IPv6 Acct AVP ...................... Prefix
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
--More-- or (q)uit
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Enabled
FlexConnect Local Switching................... Disabled
--More-- or (q)uit
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
flexconnect PPPoE pass-through................ Disabled
flexconnect local-switching IP-source-guar.... Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
--More-- or (q)uit
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
4 10.x.x.x Up
4 10.x.x.x Up
802.11u........................................ Disabled
MSAP Services.................................. Disabled -
Network connection very slow, lot of drops
Hello!
On my network, there's an ADSL modem; an AirPort Extreme is connected to it and all my computers are connected to that AirPort Extreme.
Initially, I had set the AirPort Extreme as a bridge and the modem was in PPPoE. However, I had weird troubles with that setup (one computer couldn't reach another one, not even ping) so I made the other way around: the modem is now in bridge mode and the AirPort Extreme handles the PPPoE connection.
Since then (at least, I guess), downloading from the Internet or simply browsing is a nightmare. Connections would start at a varying low rate (always less than 30 KB/s, sometimes 5 KB/s) and always slow down until the connection drops completely. For small files, I can hope to download a 1 MB file in 40 minutes; for larger ones, it's hopeless.
I've tried to rule out the AirPort Extreme, connecting one computer directly to the modem. I reset the modem (since it's in bridge mode and it's beyond the subnet made from the AirPort Extreme, how can I reach it from my network?) and enter my ISP data. When all the lights on the modem are fine, it tells me some tests failed; I can't connect to the Internet that way. It looks like the modem lost its ability to connect as PPPoE when I defined it as a bridge (?).
I then tried to rule out the modem. I connected my computer and the ADSL line to the AirPort Extreme (which still had the PPPoE settings); the AirPort Extreme would not connect or reach a DNS (what's the purpose of having PPPoE settings if it can't connect to the Internet without even passing by a modem in bridge mode?).
In short, I can't rule out either the modem nor the AirPort Extreme, because they both can't connect to the Internet separately (the modem could before I inverted which device is in bridge mode). After all my attempts, the only way to get Internet back is to set the modem again as a bridge and use the AirPort Extreme for the PPPoE, which makes the whole problem of a very slow connection (even unusable) that I'm trying to repair. I'm lost at that point.
Any help would be really welcome!Bob Timmons wrote:
Two possibilities:
1) The modem is not working correctly and should be replaced
If that's the case, then I'm feeling guilty, as it worked before I set it as a bridge.
2) Your log in information has changed due to service provider updates. Contact your provider to verify your account details
It's actually my mother who created that account; I'll ask her further.
my native language isn't English
But, your English is excellent.
Thank you.
Some countries use PPPoA authentication, and not PPPoE. Although they are similar, if your provider really uses PPPoA credentials, then you cannot log on from your Mac or use the AirPort router to provide the log on authorization, since Apple does not support PPPoA.
Well, I tried using PPPoA recently and it wasn't better. Also, the fact that the AirPort is currently the one making the PPPoE authentication seems to definitively indicate it's not PPPoA (thanks to your information that it wouldn't work in that case).
Generally, my opinion would be that things will work better if you use the modem or a modem/router to provide the connection service and run the AirPort in Bridge Mode.....rather than trying to put the modem in Bridge Mode and use the AirPort to provide the connection service.
Yes, I agree. Actually, I had another problem with the previous setup (AirPort as bridge and modem for PPPoE) where, on my LAN with two computers, only one could reach the other one (the connection worked in one direction only); I couldn't even use file sharing, Remote Desktop or even ping (because, even trying from the working sense, the response would often not come back). In this Apple forum, I got the suggestion to exchange which device was in bridge mode and, indeed, now I can communicate from and to all computers. Since I've realised my connection to the Internet is now mostly broken, I should have been satisfied with the previous problem…
I'm hoping to go back to an Internet connection that works, and not get the first issue of computers not being reachable on the LAN. The big trouble here is that all these behaviours I've experienced are weird (am I outside of the logic with my use of the devices?). I'm also noticing that the first problem sounds to have arrived since I replaced my old router by the AirPort Extreme.
If your modem is 4-5 years old, then that might be another reason to consider replacing it. Ask your provider what they would recommend.
Wow, mine is actually way older than that! I don't think we've ever changed it since we had an Internet connection (around 1998). At this time, things were not designed to break too soon, right?
Perhaps it had to break with this duration of use, and it just waited that I change settings to break… Doesn't sound a likely scenario, however.
I'm considering trying with my neighbour's modem (with his connection's settings), with the AirPort in bridge mode. If it works, I'll be almost certain the problem is the modem, I'm right?
Thank you very much for your help so far; things are getting clearer! -
Wireless Internet connection very slow
The wireless connection has gotten very slow. I have restarted the modem but that has not improved the connection. I am about to restart the TC and see if that improves the connection. What is the best way to shut the TC down and restart it? The only way I know is to unplug for 15 seconds and then put the plug back in.
ThanksTry the following ...
o Power-down the modem, Time Capsule (TC), and computer(s); wait at least 10-15 minutes. Order is not critical.
o Power-on the modem; wait at least 10-15 minutes.
o Plug-in the TC; wait at least 5-10 minutes.
o Power-on the computer(s). -
Internet connection very slow - ISP blames my computer...
Greetings,
I have DSL connection that has been running very very slow... dialup slow... I use airport, so I unplugged it and connected the ethernet cable directly to the comp - with no results.
I called my ISP, they tested the modem speed, reset the modem & went through all the settings - with no results. The modem speed is fine, so they say the problem is with my powerbook. I've rebooted the computer numerous times, also I recently cleaned up my hard drive (which has been full for months) and I currently have 14gb of free space.
What else can I do? Are there any diagnostic utilities/etc you can recommend?
Thank you in advance for all your help.
powerbook g4 Mac OS X (10.3.9)You actually are close enough to their 3meg down that you can't complain. 2.8meg down and 700kb up is fine, unless it's supposed to be their FIOS that is.
Sounds like it is the site(s) that are slow, like these boards at times.
Joe -
Internet Connection very slow WRT160N v3
I had my an IT person install a brand new WRT160N router. I also installed a new HP wireless printer/scanner/fax/printer. I am now noticing that the internet connection is very slow. Taking about 4 minutes to download any link or site I visit. I have talked to charter today and they are telling me my signal strength is great - I have highest speed they offer (20). What am I not doing right? Do i need to check this router or a connection? - Allison
Physical connection should be like from modem to the router on internet port and from computer to the routrer on ethernet port 1.
Try to readjust the wireless settings on your router....
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect... -
Internet connection very very slow and it takes 6 hours to download IOS 5 which by that time I am timed out . Can anyone help
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
IMac connection very slow via airport
I hope some of you on the forum can help me as I'm rather puzzled. My internet has always been running at a good speed ,20mbs real time 12-17mbs. Before christmas I experienced a dip in the speed. I thought it was the ISP and contacted them. It turn out that there was a fault in the area. That should naw have been fixed and running speed tests on my macbook pro's proved that correct. I'm now getting the full 20mbs. How ever the iMac is painstakingly slow on the network and when going on the internet. speedtest.net gives me a >1mbs on downloads and > .5mbs. My 17" macbook pro which is placed next to the iMac in the office upstairs is running full tilt 20mbs download and <2mbs upload. This is very frustrating as I can't understand why the difference can be so big. I've restarted router, modem, iMac. Reinstall of Snow Leopard (Clean) repaired permissions, HDD. Have i got something wrong with the airport, spyware/virus (don't see that being the case) If any one of you guys/girls has any idea's solution please let me know.
TomI think I'm having a similar problem. I have a late 2006 24-iMac C2D 2.4 and it is has very slow internet access. I understand that there is so many variables but I have another iMac (same model) and a late 2009 Macbook Pro and they have no problems. I've had the internet connection tested and it is working fine.
I can't figure out what the problem is.
Likewise, I've done the same things: reset airport, modem, moved computer, and reinstalled OSX.
I have no antivirus software.
Message was edited by: Pbtaco
Message was edited by: Pbtaco -
Since I have installed iOS7 on my iPhone 4s - 16G, my 4s connects very slowly to my home Wi-Fi network. Sometimes it even doesn't connects at all. Which result in a higher mobile data usage (and thus higher bill at the end of the month).
Can this error be solved in iOS 7.0.4?Hi masterwil,
The article below may be able to help you troubleshoot your Wi-Fi issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
I hope this information helps ....
Have a great day!
- Judy -
How to clear cookies, wireless internet connection very slow
My ethernet speed is very good, but my wireless speed is getting very slow. I wanted to clear my cookies, not sure how to do that and would that help?
Hold down the option key and select the Wi-Fi menu in the menu bar. What values are shown for the following?
PHY Mode
Channel
Security
Signal/Noise or RSSI
Transmit (or Tx) Rate
Please do not post the BSSID, as that information is private.
Now hold down the option key again and select
▹ System Information... ▹ Network ▹ Wi-Fi
Compare the two-letter Country Code with the ISO code for your country. Does it match? The code X0 means that the country couldn't be determined. The code X3 means South America, not otherwise specified. -
Imac internet connection very slow
All of a sudden everything has slowed to a crawl. Is there something I can do? don't think it's Comcast because my Iphone is working fine.
Start From here: my internet very slow speed mac.
Start From here: my internet very slow speed mac.
Slow internt can by because DNS problem OR app ,
Start from Console -> All Messages,
In my case I found a program HideMyIp (hidemyipdaemon {errXXX})
I remove the program and fix the problem!!
Good Luck -
My iPad is working fine and connecting to the internet no problem. My iMac computer, when I check the system preferences and I go into network it says my network is working fine and I appear to be connected to the Internet, yet when I going try to go on safari it won't let me connect to the Internet or if it does the connection is slow. When I do manage to connect to the internet, the connection drops quickly. What do I do?
Please answer as many of the following questions as you can.
Are all network applications slow, or only some? If only some, which ones?
Is networking always slow, or only sometimes?
Disconnect all other devices from the network. Any change?
If you can connect to more than one network, are they all slow?
If possible, connect to your router with an Ethernet cable and turn off Wi-Fi. Any difference?
Boot in safe mode and test. Any difference?
Maybe you are looking for
-
I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability pro
-
Problem with surfboard seg6580 & Airport Express (latest gen)
I can wiressly connect and iPad and Apple TV (latest models) to the internet but I cant to the same with the Airport Express.
-
Hi Guru's I want to transfer Service Tax amount from "Service Tax on hold" Account to "Service Tax Receivable Account", after payment made to Vendor. Do we need to run any other transaction code. Please advise me Regards, Arun Kumar
-
I'm trying to export out of Final Cut, but not include the entire file. This can be done easily in Compressor by simply setting an in point. But I can't seem to figure out how to do it from FCS because the in/out points aren't in the compressor setti
-
I click on the Thunderbird shortcut and Windows immediately tells me the programme has stopped working. It then tells me that "a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is avai