Timecapsule and iMac Early 2008 - Problems with Airport Utility
I have bought a new iMac and a TimeCapsule. With *Leopard 10.5.5* i have some problems to change the configuration. The Assistant will not work. The changed settings will not send to theTime Capsule (Ethernet or and Wireless). The airport signal is _very low_ under OSX (-60 — -64 dB). When I use airport with Windows XP on Bootcamp partition it will work fine. No problems with changing settings and the signal is -1 db.
Who has the same problems or can help me!
Do the black bars drop also at these times?
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Similar Messages
-
Printer problem with Airport Utility and Epson CX5500
Hi,
I recently bought an iMac '24 2.66 Computer and was able to set up my internet through an airport. When it came to hooking up a wireless Epson CX5500 printer, the airport recognized it, but when it came to print in the printing queue it simply wont print. I was able to find a very helpful post that would possibly be my next step in fixing it (probably just a program error or hook up)
Here is that post:
ideapod
*Posts: 5*
*Registered: Jul 16, 2007*
*Re: Problem connecting a Epson USB Printer*
*Posted: Sep 29, 2008 5:42 AM in response to: tonys28661 *
+Hi there,+
+I had the same problem, but with an Epson CX5500.+
+Firstly, BTW - I found out there IS a list of supported printers: http://support.apple.com/kb/HT1370?viewlocale=en_US. Before you scream - "that's leopard you idiot"; in the table, if the printer is listed with a MODERN driver, then it will work with Airport Base Station - eg TimeCapsule.+
+Next. My problem was solved by deleting the spaces put into the printer name by timecapsule. When the printer is recognised it was called "Epson CX 5500". My Macbook printer service then set up a Queue which was mdns://...Epson%20CX%205500... Note - substitution of %20 for space in the name. I removed the spaces from the name via airport utility, manual set up, printers. Now the macbook could print to it.+
Cheers,
Mark
The problem that i have is the step by step process of altering this or finding it. As i made the name of the shared printer EPSONStylusCX5500 but could not acess the printer name one to change it. The url link still shows the 20%. If someone could please take the time to explain on how to do it, then maybe just maybe, i would be able to print wirelessly. Any other ideas or even cheap printers that would work without a problem as i would simply go out and buy one instead. Thanks.When you say.....
I cannot get it to work with AirPort Utility....
What does not work? Can you open up AirPort Utility and take us through the steps? What happens after each step? -
Mac Pro Early 2008 problems with firewire 400 drives
I am having some sporadic problems with firewire 400 drives and am trying to figure out my best options going forward. System 10.5.2 has hung on me twice in the first week of use, and each time I noticed from console there were some problems accessing one or more of these drives (even though I wasn't doing any reads/writes to/from them). Just before one of the crashes, Disk Utility also had problems "seeing" these drives. My external firewire drives are:
Maxtor OneTouch III 750GB
Acomdata enclosure/Seagate 400GB
LaCie d2/160GB
LaCie w/Lightscribe DVD
I have this "cobbled" arrangement because I just upgraded from an eMac and needed these drives to manage video files, audio files, photos, etc. While I'd love to go out and buy new internals to install in my spare bays, and migrate the data to them, I will have to do that in stages as my budget is tapped out at the moment. My MacPro is the base version of the early 2008 units, with 300GB internal.
In the interim, is it worth troubleshooting firmware updates for these externals, or am I destined to continue to have firewire problems? Is there a straight-forward/inexpensive way to remove these drives from enclosures/install in drive bays with an adaptor? I believe the external hard drives are all ATA type drives.
Thanks in advance for any counsel.I would assume that the Maxtor may be SATA. Does it have an eSATA port? Also, there were a lot of threads (in OS X Leopard forum) about those OneTouch units. Same can be said for LaCie problems.
Yes, check for firmware and configuration. In some cases, and what I do with any new OS, is to reformat all drives - gradually. Given the age of the eMac I'd guess firmware is out of date, and that the drives are formatted some time ago. While you don't have to use GUID, it is a good idea eventually, or just reformat a drive.
Don't forget to test your drives with Disk Warrior (4.1) also.
750GB WD Caviar is $139 SATA.
http://eshop.macsales.com/Specials/XLR8YourMac.cfm?Criteria=&sort=&man=Western%2 0Digital
Are you using daisy chains? you have one FW bus shared by front and back ports. Do you have any on FW800 or using FW400 to FW800 adapter cable? PCI Express FW400 card might even help a little.
Never had trouble with OWC enclosures:
http://www.macsales.com/firewire/ -
Time Capsule Connectivity Problem with Airport Utility and Mavericks
I have a Time Capsule from 2011 which worked perfectly with my IMac and Airport Utility 5.6.1 but since the upgrade to Mavericks, I cannot get it to work with Airport Utility. Any help much appreciated. Thanks.
When you say.....
I cannot get it to work with AirPort Utility....
What does not work? Can you open up AirPort Utility and take us through the steps? What happens after each step? -
Any problem with Airport Utility 5.3.2 and an AirDisk
Morning.
Can I harmlessly update onto Airport Utility 5.3.2 without getting troubles using an USB hard disk connntected to the Airport Extreme base station? 5.3.1 has fixed a bug that has caused reiterative disconnects to the AirDisk occurring with 5.3.0.
And I really to not want to get these troubles back in 5.3.2.
Are my fears baseless?
TIA and kind regards, FriedrichAirport Utility 5.3.2 is quite harmless. More people having problem with OS X 10.5.3 update, which is making the AirDisk very slow and unresponsive. I end up re-formating the USB hard disk to solve the problem.
-
Problem description:
My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
EtreCheck version: 2.1.8 (121)
Report generated April 14, 2015 at 9:50:48 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (24-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 8800 GS - VRAM: 512 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
Disk Information: ℹ️
Hitachi HDS721010KLA330 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.SafariNotificationAgent.plist
[killed] com.apple.sbd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
[killed] com.apple.warmd_agent.plist
11 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nesessionmanager.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.wdhelper.plist
[killed] org.cups.cupsd.plist
12 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.adobe.AdobeCreativeCloud.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[running] com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
ChronoSyncBackgrounder Application (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
Dropbox Application (/Applications/Dropbox.app)
Canon IJ Network Scanner Selector2 Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
Google Drive Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 [Click for support]
OVSHelper: Version: 1.1 [Click for support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
WebEx: Version: 1.0 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS2 [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
VIA PrefPane [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
3% WindowServer
3% Mail
2% com.apple.iCloudHelper
1% Creative Cloud
1% Google Chrome
Top Processes by Memory: ℹ️
223 MB Google Chrome
150 MB Finder
129 MB Google Chrome Helper
112 MB Mail
69 MB Google Drive
Virtual Memory Information: ℹ️
35 MB Free RAM
1.45 GB Active RAM
1.45 GB Inactive RAM
888 MB Wired RAM
27.01 GB Page-ins
851 MB Page-outsWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
My two iMacs frequently go offline when I have my iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices the offline problem stops. Any thoughts on this?
.....doesn't that seems to suggest the modem?
That is what I have suggested....twice now. From posts above:
My opinion would be that it is likely not the ISP, unless you have complete loss of Internet service for all devices at the same time......it is the Comtrend device....
and
I believe that the problem lies with the modem, and not the ISP signal.
Your ISP will likely have a different opinion, though. Please keep us posted on your progress. -
have iMac early 2008 2.8 Ghz with ox10.9.1 safari keeps shouding down can I deleted it and installed a new safari?
The Safari version you need is 7.0.1. What version shows in About Safari?
-
Have an iMac Early 2008 + Windows 7 and no sound from speaker out? SOLVED!!
Hello everyone,
So I'm pleased to say after over a month of trying to solve this annoying problem, it's been solved! Basically, if you have an iMac, Early 2008 edition (8,1) and Windows 7 and notice that the default microsoft driver gives very low sound and the new realtek drivers only give sound through the internal speakers... then this solution is for you!
What you'll need:
7-zip (www.7-zip.com)
Mac OS X 10.5 Leopard Disc 1 (NOT Snow Leopard!)
Here's what you'll need to do, step by step:
1) Uninstall the Realtek Driver (latest version currently 2.37) by going to Control Panel / Programs / Uninstall Programs.
2) Reboot. Upon reboot, the system will automatically reinstall the default Microsoft drivers. You can check this in Device Manager (control panel / system / device manager).
3) Insert the original Leopard Disc 1 that came with your iMac (very important, as this is the only driver I know for sure will work). Point windows explorer to the folder: D:\Boot Camp\Drivers (assuming d: is your cd-rom drive).
4) Copy the "RealTekSetup.exe" file somewhere on your desktop. Do NOT install it!
5) Decompress "RealTekSetup.exe" by right clicking the file and choosing "7-zip decompress". Again, you'll need to make sure you installed 7-zip from 7zip.com prior to doing this.
6) Go to your Device Manager again, right click the sound device (which should be something like High Definition Audio) and choose "Update Device Software".
7) Select "Browse my computer for driver software" and direct it to the folder that you extracted the drivers to.
8) You now have sound through your EXTERNAL SPEAKERS!
This works because there is a bug that RealTek/Apple does not seem to want to fix where the newer version of the RealTek control panel detects the speaker out as line in and the line in as nothing! This forces drivers normally made for Vista or Vista64 to install on Windows 7, which work 100% great.
I promise you, if you have an Early 2008 iMac, this WILL fix your problem if you follow each step! Let me know if you have any questions!
Brad LevicoffIf you don't have any Leopard disk then just google for "Vista_R199.exe".
This driver works nice on Early 2008 IMAC. I also tried an earlier version, Vista_R182.exe but there sometimes was a horrible background noise which made listening to music impossible.
Just download and follow the instructions above in the first post.
Have fun.
Uska
Message was edited by: Uska -
Problem reinstalling Mac 10.6.8 on iMac early 2008, 2 meg memory.
Have iMac early 2008 2meg memory. Upgraded from 10.5.8 to 10.6 then to 10.6.8 but computer ran slow and froze so tried to reinstall OS 10.6 with disc. Used disc utility to check hard drive and it was ok. Tried twice to install 10.6 from install disc, but both times failed due to errors. Existing system 10.6.8 is corrupt so need to reinstall 10.6 then upgrade to 10.6.8 . I don't want to erase disc as have some apps e.g. CS5, which I don't want to erase. I also would prefer not having to back up disc apps and then reformat disc. Any suggestions? Guess I could make boot drive, erase hard drive OS 10.6.8, and then install new copy. Had major issues with 10.6.8 running slow and freezing. Could that be 2 meg memory? Have more memory coming in mail and will upgrade to 4 meg. Can you run more than the apple recommended 4 meg on this machine? Thanks for help. Sorry for the lengthly post.....
To do what you want requires erasing the disk first. There is no way around this.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
This seemed to happen very suddenly; I left my iMac running while i went out and came in to find that the screen was totally unusable, as you will be able to see from the picture it has a lot of lines that seem to come and go a random and sometimes it goes black all together. What do you think is wrong with it? Logic board? Graphics card? Screen itself?.. also if it is the graphics card, is it separate to the logic board or do both need to be replaced?
Also some additional info:
iMac Early 2008
2.4ghz
4gb Ram
OSX 10.9.2
ATI Radion HD 2400
Actual computer working on external monitor, just not internal
ThanksCosts vary by area, I think you may find out though that spending money on a 6+ year computer may not be worth it, you can buy an Apple Refurbished Mac with much more up-to-date specifications and save hundreds of $s. If this is of interest you can only find them on Apple's on-line store, in the US the current link is:
http://store.apple.com/us/browse/home/specialdeals
Then click the link to the iMacs. If you don't find one you want, continue looking the inventories change frequently, sometimes by the hour. -
I'm having a problem on my iMac early 2008 (2.4GHz Core 2 Duo 4gb SDRAM) after upgrading to Mac OS X Lion.
The animation such as mission control and full screen and especially, launch pad performs really slow.
Sometimes, mission control doesn't even show the animation.
This is terrible and I want Apple to fix these problems or otherwise this is just making my mac useless.
Does anyone experience having similar problem?thanks for the reply!
I've checked the activity monitor but nothing was taking up the space expect for Flash Player (Safari Internet plug-in, which takes up 29% of CPU)
here's my screenshot. can you see any problems?
and here's another -
I just purchased an airport extreme router to increase the range of my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?
sylviafromhanover wrote:
So I assume that the original modem stays installed with the coaxial cable and the Exrtreme is in addition to that.
Yes, that is correct.
Did you have the instructions that came with your Airport Extreme? Are you sure you have it setup properly? Here is the setup guide:
http://manuals.info.apple.com/en/airportextreme_802.11n_userguide.pdf
Ensure you have everything setup properly. Once you do this and if you are still having trouble, follow Star's instructions. -
we have a mac laptop and dont have any problems with pdf files but our imac will not open them. any suggestions?
Back up all data.
In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,
Think you need to provide some more details about what you are connecting
Maybe you are looking for
-
Issue in User Level Simulation in GRC 10.0
Hello Every one, Before i Jump into the question, please find below the screen shot which tells about the B.P(Business process),Functions created in test system(GRC 10.0), where as the roles and corresponding users which have been created in back end
-
Yahoo mail doesn't work any more in macBook mail
Yahoo mail doesn't work any more in mac mail. Any help?
-
I have mavericks OS X and created a new user due to problems with my older user account. The genius bar helped move all of my files over to the new user without any problems. However now when I am on my new user and I go to make any changes to thes
-
I have an applet served from orion application server. There are several Jar files that need to be downloaded to the client in order for the application to work. I noticed in JRE 1.3.1 when a Jar file was downloading a pop up with status Bar appeared
-
Hi, i need meter the frquency by this method: The frequency reading shall be obtained every 10 s. The frequency output is the ratio of the number of integral cycles counted during the 10 s time clock interval, divided by the cumulative duration of th