Timecode Chapter Marker Input Field

I would love to see an option in the timeline to be able to input into a field the timecode where you want to have a chapter mark. I edit with Avid and I can set marks then just copy them direct just by making some minor changes. But the biggest problems have been having to redo projects because of wild errors.
EXAMPLE:
00:00:11:00
00:01:16:00
00:02:22:00
00:03:08:00
I work with Encore every 2 Months and everytime I'm 99% done with a project Encore gives me some crazy error that I always need to redo my project (4:30am). Sorry for complaining but it's getting really annoying. I LOVE ADOBE but this is killing me.
Thanks

You can do that now. Click in the timeline timecode display in the upper left corner of the timeline panel. Enter your timecode. Press the "*" (asterisk) key on the number pad. You now have a new chapter.
Just remember that if the source video on the timeline is already transcoded, you will only be able to put chapter markers on GOP boundaries (I-frames).

Similar Messages

Duplicated chapter marks

I've just found out about the ability to add chapter marks to QuickTime movies, something which is incredibly useful and should be exploited more often. But I can't seem to get it to work properly...
Let's say I create a plain text document with my chapter names called "text1", and open that file in QuickTime. When I 'select all', copy, go to my movie, select 'Add to Selection and Scale', go into Movie Properties, choose Other Settings > Chapters [etc...] the little menu that pops up in the timeline shows all of my chapter names perfectly. At this point, I haven't exported "text1" from QuickTime as a text-to-text document.
When I do export "text1" as a text-to-text document and open "text1" in TextEdit, I get a list of my chapter names and timecodes - I change these timecodes to the corresponding chapter name, and save the file as "text2".
When I open "text2" in QT and go through 'select all', copy, Movie Properties [etc...] the little menu that pops up in the timeline seems to duplicate most (but not all) of my chapter marks. So for example the list would show:
Titles
Titles
Introduction
Introduction
Jo
Jo
Claire
Journey
Journey
Arrival
Arrival
Dinner
Party
Afterwards
Clicking on the 'duplicate' chapter name takes me to a point in the movie that I haven't specified. This happens *every single time* I put in the correct timecodes to the corresponding chapter name; with every single movie I try, and it's really quite frustrating.
I know it's a long post - but any help would be much appreciated from you lovely people
17" iMac G4 800Mhz Mac OS X (10.4.4) 80GB, 768MB RAM

1. Yes, I'm saving as a .txt file.
2. Maybe I should have explained it a bit better; I think you might have misunderstood me. The first time I went through the procedure of added chapter markers, everything seemed to go okay, no error messages etc. I noticed that the chapter menu appeared in the timeline, so thought I'd have a look to see it was working okay before I actually saved the file - it was then I noticed that most of the chapter names had been duplicated.
So then I decided to try again from the beginning; creating a new .txt file with my chapter names, opening and exporting that .txt file from QuickTime. At this point I'd normally open that new file in TextEdit and input the relvant timecodes; but I decided to import that file into my movie, *as if* I'd already put in the relevant timecodes. When I did this, my chapter names appeared fine, no duplications etc. Thinking that everything was okay now, I'd open this .txt file in TextEdit and put in the relevant timecodes, save, and use that file in QT - but the chapter names are duplicated in QT.
It seems that my chapter names are only ever duplicated whenever I put in my own timecodes in the .txt file (after exporting as a text-to-text in QT). and yes, I'm using QT Pro 7.04, repaired permission etc I do appreciate your help in this.

Read-only input field error

I have an input field marked read-only on a form. When I run the application, select the read-only field, press enter, then Save (validating action), I get a WebDynpro exception saying that I attempted to modify a read-only context attribute. This does not happen if I select the field and press other keys (such as characters)... only when I press enter. If I make the field disabled (instead of read-only), this error is avoided because I cannot even select the input field - but I would rather use read-only because it doesn't gray out the field at runtime. Is this a bug, or am I missing something?
-Dave

When you select the inputField and press enter the OnEnter action of the inputField is being called.
When you disable the inputField it prevents you from entering values as well as accessing it actions also.
When you try to keep you context attribute as read only and keep the input field as enabled it is similar to trying to modify a read only attribute which is not permissible.
Hence the error.
Revert for further clarifications.
Message was edited by: Noufal Kareem

Mouse scroll wheel do not command Photoshop input fields correctly

Hi guys,
Some general info:
1. I have Logitech Keyboard K800 - it have its own receiver
2. I have Logitech Mouse (MX1100) - it have its own receiver
3. Photoshop CS6 x64 - latest updates
4. Windows 7 x64 - latest updates
5. SetPoint - latest version
6. More about the system (please let me know if I have to post all the text from Photoshop System Info popup):
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3410 MHz
Built-in memory: 16342 MB
Free memory: 9098 MB
Memory available to Photoshop: 14718 MB
Memory used by Photoshop: 90 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 560/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1050, right: 1680
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 560
OpenCL Version:
Driver Version: 9.18.13.1090
Driver Date: 20121229000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1680 x 1050 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 560
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 92298292820550253494
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\kckfm\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
F:\, 685.6G, 198.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Some other info:
You know that you can control Photoshop input fields http://screencast.com/t/ApVseKYRxz with the mouse scroll wheel. Pretty handy indeed. You just have to click on the field and spin the wheel and values changing.
The problem:
My mouse wheel cannot control the input fields in this way. I select the field, spin the wheel and nothing happen. When I spin it faster a couple of times, than the values get changing - pretty strange ha? Scrolling normally - do not change, scrolling fast change. But to scroll fast is not an option because I cannot change the values slightly with small increments... There is a bug really...
What I tried and didn't work:
1. Restarted Photoshop
2. Plug/Unplug and change different USB slots for both receivers.
3. Reintalling latest SetPoint Drivers (after uninstall I run ccleaner)
4. Put all SetPoint settings to defaults (because I programmed some mouse keys to Photoshop specifically).
5. Install earlier versions of SetPoint drivers.
6. Set my UEFI BIOS to defaults.
7. Restarted the BIOS to load all the drivers again, but still no luck
(the last think I didn't do is to reinstall Photoshop)
What I have investigated so far:
1. When I restart the computer and run Photoshop it works perfect HA! , but after a seconds it do not words again ...
2. When I stop SetPoint software, when I shut down it, it words perfect.
3. When I unplug keyboard receiver it words perfect, but I do not have keyboard:)
4. Everything works perfect in Illustrator and After effects.
5. Also I noticed that when I scroll images in CameraRaw - http://screencast.com/t/xKnn6cY9 the I have to scroll harder and spin the wheel harder to scroll - the same problem.
6. Also in photoshop and bridge scrolling here - is pretty smooth and works perfect - http://screencast.com/t/75IXMG6Zria
Maybe the most important part - When I start experiencing the problem:
I had same configuration , same everything and everything worked fine.
I installed SSD disk, reinstalled Windows (same like before), updated my BIOS to UEFI. Installed Photoshop and SetPoint and problem started.
Posted same request to Logitech, but want to ask you for help too.
Thanks!

Hi all,
I found a solution.
1. Uninstall your current Setpoint Driver.
2. Run CCleaner - http://www.piriform.com/ccleaner
3. Download an older version of SetPoint - http://www.oldapps.com/setpoint.php
(I used SetPoint 6.15 (x64), I tried 6.20, 6.32, 6.50 , but no luck)
4. Now everything is all right!
Thanks!
Can somebody mark this as solved? Thanks!
SK

In BSP how to give the input field as mandatory?

Hi friends,
In BSP how to give the input field as mandatory?
In BSP i want to validate the input field (example checking the material no is valid or not)
if this material no doesnot exit means i want to pass error message.What is the code for that.
Moosa

hi
try this
in LAYOUT
<htmlb:inputField id = "vname" disabled = "False" value = "<%= v_visitor %>"/> <font color="red" size="2"><b><%= page->messages->assert_message( 'vname' ) %></b></font></td>
in DO_HANDLE_EVENT
in oninputprocessing
CLASS CL_HTMLB_MANAGER DEFINITION LOAD.
IF event_id = CL_HTMLB_MANAGER=>EVENT_ID.
DATA: event TYPE REF TO CL_HTMLB_EVENT.
event = CL_HTMLB_MANAGER=>get_event( runtime->server->request ).
IF event->name = 'button' AND event->event_type = 'click'.
    DATA: button_event TYPE REF TO CL_HTMLB_EVENT_BUTTON.
    button_event ?= event.
ENDIF.
    case event->id.
        when 'select'.
           if v_visitor = ''.
             page->messages->add_message(
             condition = 'vname'
             message   = 'Visitor Name can not be blank'
             severity = page->messages->CO_SEVERITY_ERROR ).
          ELSE.
                here u can write ur when ur field getting filled
        endif.
     endcase.
endif.
give marks if it is helpful
thanks

Tutorial on Creating Chapter Marks is Incorrect

I just discovered that by following the tutorial for adding chapter marks to a movie you end up with chapter marks that are duplicated in the chapter popup menu of the QT movie window.
Instead of "Add to Selection and Scale" as indicated in the tutorial, you need to select "Add to Movie". Once I did this, the chapter marks behaved correctly and did not duplicate. You just need to be sure that the length of your text track is the same length as the video and audio tracks.
Hope this helps someone from tearing their hair out. Luckily I discovered this before tearing all of mine out.

Not so fast.
There's another problem, to do with the duration of the chapter track movie before it is copied and pasted into the main movie.
The tutorial tells us that when we export the timecode text file to work on, we should set fractions of seconds to 1/30th. I understand that this is because this is the way the Inspector shows time. Which, indeed, seems to be the case. (I just want to make it clear that I did this.)
Next step: in my text file I fill in my timecodes for the chapters, including the last timecode, which matches the movie's duration. I save the text file, open it in Quicktime and... whaa? The duration is fractionally longer. I select all and paste into my main movie and "Add to movie" and, yes, the chapter track pushes out the end of the movie. Well, no worries, I can trim the end of the movie.
But this is not enough! I also find that some of the chapters begin at the wrong points. Really odd. It seems to be chapter points early in the movie rather than later, which is counterintuitive since one would think that a timecode error would aggregate over the length of the movie.
The only way I've found to overcome this issue is to launch QuickTime Player 6 and use this instead. It opens text files with chapter information and creates chapter "movies" of the right length. When pasted into the main movie, chapter markers fall in exactly the right place.
I think I'd better make a bug report. Anyone else come across this?

Grey out the input field as soon as check box checks on selection screen!

HI Experts,
In my report selection screen I have input_field1, input_field2, check_box1. Both input fields are mandatory fileds.
My requireemnt is: If user as soon as checks the check_box1, the first input_field1 must go grey out (not allow allow to enter)!
So I have assigned a user command to check box and assigned a modif-ID to the input_field1
and wrote a LOOP AT SCREEN code as below,
PARAMETERS show_all AS CHECKBOX USER-COMMAND flag.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p1 TYPE c LENGTH 10,
            p2 TYPE c LENGTH 10,
            p3 TYPE c LENGTH 10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: p4 TYPE c LENGTH 10 MODIF ID bl2,
            p5 TYPE c LENGTH 10 MODIF ID bl2,
            p6 TYPE c LENGTH 10 MODIF ID bl2.
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF show_all <> 'X' AND
       screen-group1 = 'BL2'.
       screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
But,am getting an error message saying "Enter all required fields"
Pls. let me know how to fix this?
Thank you

I assume P1, P2 and P3 are marked as obligatory.
You cannot achieve that. But here is an alternative to achieve a similar functionality.
AT SELECTION-SCREEN.
CHECK sy-ucomm EQ 'ONLI' OR sy-ucomm = 'SJOB' OR sy-ucomm = 'PRIN'.
IF p1 is INITIAL or P2 is INITIAL or P3 is INITIAL.
    MESSAGE 'Enter all required fields' TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF show_all = 'X' AND
       screen-group1 = 'BL2'.
      screen-input = '0'.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.

Quantity field as input field in purchase templates

Hi SDN,
we are on WAS 700, SRM 5.0. SRM Server 5.5
I am facing an urgent change request, which is a modification of standard templates and dynpros.
The Task:
When I create a shopping cart via "Old Purchase Orders and Templates" I want the quantity field as an input field, so that I can change quantities right here, when adding items from the public template to the shopping cart.
The Business Case:
We get tons of bad user feedback, as the process as it is, is really time consuming, because first you chose items from the template and in the next step you have to change the quantities.
The html template involved is the:
SAPLBBP_PDH_SEARCH 4001
The corresponding dynpro is:
4001 in function group BBP_PDH_SEARCH
In the dynpro I see a quantity-field in the creen painter:
-QUANTITY in Table Control TC_SUBLIST_SC
in the html template I have:
`if (SUBLIST-ITM_TYPE[n].value != "HIER")`
              `SUBLIST-QUANTITY[n].value` `SUBLIST-UNIT[n].value`
I guess I need something like:
<input type="text" name="<SUB_WA>-QUANTITY" value="`SUBLIST-QUANTITY[n].value`">
How do I set up the input field? Help greatly appreciated!!!
Kind regards, Matthias Kasig
Message was edited by:
        Matthias Kasig

Hi,
in perform mark_read_from_web you have something like that:
MODIFY <sublist> FROM <lfs_sub_wa>.
this modifies your sublist with new values.
All you have to do is add to <lfs_sub_wa> quantity field.
in code:
lv_index = lv_index + 1.
      field-get 'SUBLIST-MARK' lv_index lt_mark lv_leng.
      IF sy-subrc <> 0.
        CONTINUE.
      ELSE.
        READ TABLE lt_mark INDEX 1.
        IF sy-subrc EQ 0.
          MOVE lt_mark TO <lfs_sub_mark>.
          MODIFY <sublist> FROM <lfs_sub_wa>.
          IF <lfs_itm_type> EQ c_hier AND
             <lfs_exp> is initial And
             lt_mark EQ gc_yes.
            MOVE <lfs_itm_guid> TO lt_sel_hier-guid.
            APPEND lt_sel_hier.
          ENDIF.
        ENDIF.
      ENDIF.
add something like this:
lv_index = lv_index + 1.
      field-get 'SUBLIST-MARK' lv_index lt_mark lv_leng.
      field-get 'SUBLIST-QUANTITY' lv_index lt_mark lv_leng.
      IF sy-subrc <> 0.
        CONTINUE.
      ELSE.
        READ TABLE lt_mark INDEX 1.
        IF sy-subrc EQ 0.
          MOVE lt_mark TO <lfs_sub_mark>.
          MODIFY <sublist> FROM <lfs_sub_wa>.
          IF <lfs_itm_type> EQ c_hier AND
             <lfs_exp> is initial And
             lt_mark EQ gc_yes.
            MOVE <lfs_itm_guid> TO lt_sel_hier-guid.
            APPEND lt_sel_hier.
          ENDIF.
        ENDIF.
      ENDIF.
Regards,
Marcin Gajewski

Mandatory input field in View

Hi All,
Mandatory input field in group
In my web dynpro application i have marked the input field "required" and in output it shows with red asterisks...
In my view i have 2 group elements with different fields. I am using method *check_mandatory_attr_on_view* to get mandatory fields in view, its not returning all mandatory fields in view. its just returning mandatory fields in first group.
Has any one faced this kind of issue before? Is there anything additional to be done?
Thanks
Rajesh Yadla

Depending on which NetWeaver SPS your are,
there are some errors in this method,
so better use the other method (CHECK_MANDATORY_ATTRIBUTES).
This seems to work well.
Check also SAP Notes:
[Note 1026272 - WDA: Mandatory check on view of multiple context nodes|https://service.sap.com/sap/support/notes/1091460]
[Note 1091460 - WDA: CHECK_MANDATORY_ATTR_ON_VIEW checks only LeadSelection|https://service.sap.com/sap/support/notes/1026272]

Automatically fill input fields based on selection from dynamic drop down

Hi All,
I tried to search before posting, but i cannot find appropriate thread (maybe wrong keyword).
My scenario:
1. In my offline interactive form, I have:
    a. Material Number --> drop down field with "Allow Custom Text Entry" ticked
    b. 1 execution button to call web service
    c. Material Group - Input Field (Read Only)
2. User will enter material number with wild card character (eg: ABC*).
    User will then click the execution button.
    Web Service in result will return all materials that match the entered material number.
    Dynamic binding will do the magic to generate the drop down list.
3. Beside material number, web service will also return material description and material group.
    Below is the illustration:
     Material        Description       Material Group
     ABC              Material ABC           GRP01
     ABCDE        Material ABCDE          GRP02
--- so far so good ---
My requirement:
Every time user select material from the drop down list, i want to auto-populate field "Material Group" (which value is also returned by web service).
I know i need to put the script on event change of the drop down field.
But i don't know how to read internal table returned by web service.
Hope someone can enlighten me.
Thanks in Advance !!!

Solved after reading:
1. /people/juergen.hauser2/blog/2007/09/03/accessing-data-nodes-in-sap-interactive-forms
2. Chapter 7 of Live Cycle Designer Scripting Basics
(http://help.adobe.com/en_US/livecycle/9.0/LiveCycle_Designer_Scripting_Basics.pdf)
Thanks.

Choose an entry in Search help and not in its input field

Hi to all,
In my application I have a field with a search help.
I want that this field only can be modified using a search help and this field can't be modified directly writing in this field.
Is similar to transaction se63 - Translation - Abap objects - Short texts - OTR - Source language
I have created an example with the field SCARR-CARRID but this field can be modified with search help and directly, or this field can't be modified.
In my application I have done the following:
-> Screen painter (layout):
Name: SCARR-CARRID
Input Field: not marked
Output Field: marked
Possible entries: marked
Possible entries keys: 2
-> Flow logic:
PROCESS BEFORE OUTPUT.
MODULE IMPORT_DATA_0001.
PROCESS AFTER INPUT.
MODULE EXPORT_DATA_0001.
PROCESS ON VALUE-REQUEST.
FIELD SCARR-CARRID MODULE listbox.
PROCESS ON HELP-REQUEST.
MODULE listbox INPUT.
TYPES:
BEGIN OF VRM_VALUE,
KEY(40) TYPE C,
TEXT(80) TYPE C,
END OF VRM_VALUE,
VRM_VALUES TYPE VRM_VALUE OCCURS 0,
VRM_ID TYPE VRM_VALUE-TEXT,
VRM_IDS TYPE VRM_ID OCCURS 0.
DATA: name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list.
CHECK list[] IS INITIAL.
name = 'SCARR-CARRID'.
SELECT carrid CARRNAME FROM SCARR
INTO (value-key,value-text).
APPEND value TO list.
ENDSELECT.
SORT list BY text.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name
values = list.
ENDMODULE. " LISTBOX INPUT
How can i solve this problem?
Thanks a lot.

Hi Jey:
I have tried this:
MODULE listbox INPUT.
TYPES: BEGIN OF vrm_value,
           key(40) TYPE c,
           text(80) TYPE c,
         END OF vrm_value,
vrm_values TYPE TABLE OF vrm_value,
vrm_id     TYPE vrm_value-text,
vrm_ids    TYPE TABLE OF vrm_id.
DATA: name       TYPE vrm_id,
        list       TYPE TABLE OF vrm_value WITH HEADER LINE,
        poplist    TYPE TABLE OF spopli WITH HEADER LINE,
        popanswer TYPE c,
        popindex   TYPE i,
        value      TYPE vrm_value,
        lt_dyntab TYPE TABLE OF dynpread WITH HEADER LINE,
        dynpprog   TYPE syrepid VALUE 'SAPMZxxxx',           "Enter your dynpro here
        dynpnr     TYPE sydynnr VALUE '0100',          "Enter your screen number here
        dynpfield TYPE help_info-dynprofld VALUE 'SCARR-CARRID'.
IF list[] IS INITIAL.
    name = 'SCARR-CARRID'.
    SELECT carrid carrname FROM scarr
    INTO (value-key,value-text).
      APPEND value TO list.
      poplist-varoption = value-text.
      APPEND poplist.
    ENDSELECT.
ENDIF.
Use some method to display a list for selection
Here is a simplified way of doing it but there are
much more sofisiticated methods.
CALL FUNCTION 'POPUP_TO_DECIDE_LIST'
       EXPORTING
            textline1          = 'Select an entry'
            titel              = 'Selection'
       IMPORTING
            answer             = popanswer
       TABLES
            t_spopli           = poplist
       EXCEPTIONS
            not_enough_answers = 1
            too_much_answers   = 2
            too_much_marks     = 3
            OTHERS             = 4.
CHECK sy-subrc = 0.
CHECK popanswer NE 'A'.
popindex = popanswer.
READ TABLE list INDEX popindex.
IF sy-subrc = 0.
    lt_dyntab-fieldvalue = list-key.
ENDIF.
Update the screen field with the selected value
lt_dyntab-fieldname = dynpfield.
APPEND lt_dyntab.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
       EXPORTING
            dyname               = dynpprog
            dynumb               = dynpnr
       TABLES
            dynpfields           = lt_dyntab
       EXCEPTIONS
            invalid_abapworkarea = 1
            invalid_dynprofield = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription = 6
            undefind_error       = 7
            OTHERS               = 8.
ENDMODULE. " LISTBOX INPUT
I think that there is a error that I have not seen because I put a breakpoint at the beginning of your code and the execution doesn`t stop.
Now I execute the dynpro and appears my field 'SCARR-CARRID' and I can't choose a value and I can write in input field.
Can you help me?
Thanks a lot.

Strange measurement input fields behaviour

Hello,
I have a Czech version of Illustrator CC on Windows 7 Pro.
Some measurement input fields are not working as expected, for example:
When creating a new document:
Decimal marks in document dimensions have disappeared (instead 210.00 mm it shows 210 00 mm). It also disappears after I add it. Another strange thing is when I click in the input box, do nothing and click out the value changes to 5779 55 mm
(Something similar is happening in my InDesign: I can't change an object's dimension expressed with a number with a decimal mark to another number with a decimal mark - only to an integer. I'm not working in Web mode.)
Is this behaviour controlled by some settings I can't find or is this a bug?
Every note leading to a solution much appreciated!

maara,
The decimal point is basically governed by your Regional/Language settings, in the Control Panel I believe.
There may be some issues between . and , for decimal point (and reversely for thousands).
But, especially if the behaviour has not always been there, you may try the list below.
In any case you may try a chat or a support call, here or here,
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Adobe Support (phone),
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

I/O field (input field) xyz has no accessible label ?

I have a selection screen which has several radio buttons as the code below. I checked code by using code inspector and it issued error messages "I/O field (input field) xyz has no accessible label". How do I fix this? thanks
SELECTION-SCREEN BEGIN OF BLOCK status
WITH FRAME
TITLE text-006.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS dy_ofn LIKE rihea-dy_ofn FOR TABLE diaufk.
SELECTION-SCREEN COMMENT 3(11) text-001 FOR FIELD dy_ofn.
PARAMETERS dy_iar LIKE rihea-dy_iar FOR TABLE diaufk.
SELECTION-SCREEN COMMENT 16(10) text-002 FOR FIELD dy_iar.
PARAMETERS dy_mab LIKE rihea-dy_mab FOR TABLE diaufk.
SELECTION-SCREEN COMMENT 29(10) text-003 FOR FIELD dy_mab.
PARAMETERS dy_his LIKE rihea-dy_his FOR TABLE diaufk.
SELECTION-SCREEN COMMENT 42(10) text-004 FOR FIELD dy_his.
SELECTION-SCREEN COMMENT 52(10) text-005 FOR FIELD selschem.
PARAMETERS selschem LIKE tj48t-selid FOR TABLE diaufk.
SELECTION-SCREEN PUSHBUTTON 73(5) p_addr USER-COMMAND addr
FOR TABLE diaufk.
PARAMETERS dy_adrfl NO-DISPLAY FOR TABLE diaufk.
SELECTION-SCREEN COMMENT 79(30) ad_icon FOR TABLE diaufk.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK status.

Hi,
If an input field is located next to a selected radio button and its label, you must show this field as being ready for input.
o If an input field is located next to a non-selected radio button and its label, you must show this field as inactive. Chapter 3.4 discusses why this is necessary.
u2022 Do not place more than one element on the right of the label. If more than one element is placed after the label, then screen readers cannot read the following relationships correctly:
o Relationship between a checkbox and a label
o Relationship between a radio button and a label
o Relationship between an input field and a label.
Also, Please go through this document:
http://www.sapdesignguild.org/resources/Accessibility_Guideline_ABAP_external_Version.pdf

Bad Chapter Marker: Simulate works fine, DVD freezes

Working on a Choir Concert with multiple chapters. Simulate works fine. But the build produced a freeze a split seconds after a chapter marker. I have changed the chapter location but it still freezes at the exact same spot. If I go to a chapter after the troublesome one, it plays fine. If play fine up to the chapter marker.
When I moved the chapter marker, it played fine, until the chapter marker was encountered again.
The chapter marker was set in FCP 5.1. All other chapter marker work fine.
Below are the compressor settings used.
I will delete and reenter it in DVDSP. But I am curious: why would a chapter marker would go bad?
thanks
Name: MPGE-2 5.0Mbps 1-pass 4:3 Mode Best, Motion Better
Description: Fits 120 minutes of video with Dolby Digital at 192 Kbps or 90 minutes with AIFF on a DVD-5
File Extension: m2v
Estimated file size: 3.47 GB
Type: MPEG-2 video elementary stream
Video Encoder
Format: M2V
Width: 720
Height: 480
Pixel aspect ratio: NTSC CCIR 601/DV
Crop: None
Frame rate: 29.97
Frame Controls: Off
Aspect ratio: 4:3
Field dominance: Bottom first
Average data rate: 5 (Mbps)
1 Pass VBR enabled
Maximum data rate: 7.5 (Mbps)
High quality
Better motion estimation
Closed GOP Size: 15, Structure: IBBP
DVD Studio Pro meta-data enabled
Name: Dolby 2.0 Digital Professional
Description: No description
File Extension: ac3
Audio Encoder
Format: AC3
Sample Rate: 48.000kHz
Channels: 2
Bits Per Sample: 16
Target System: DVD Video
Data Rate: 192 kbps
Compression Preset: Film Standard
Audio Coding Mode: 2/0 (L, R)
BitStream Mode: Complete Main
Center Mix Level: -3dB
Surround Mix Level: -3dB
Dolby Surround Mode: None
LFE Exists: No
Dialog Normalization: -27 dbFS
Copyright Exists: Yes
Original Content: Yes
Audio Production Information Exists: No
RF Overmodulation Protection: Off
Channel Bandwidth Lowpass Filter: On
DC Highpass Filter: On
LFE Channel Lowpass Filter: On
3dB Attenuation: Off
phase 90: On
Deemphasis: Off

Simulate works fine. But the build produced a freeze a split seconds after a chapter marker. I have changed the chapter location but it still freezes at the exact same spot.
It sounds like you are saying that "same exact spot" means the spot where the marker is moved to and not the same exact splace on the timeline, and it looks that way based on the rest of your post(?)
The chapter marker was set in FCP 5.1. All other chapter marker work fine.
Could be a few things. First make sure you have not accidently set a command for that chpater maker, you may have done so and Simulator since it is not perfect maybe it is missing it somehow.
I would delete just the one marker causing problems and see if it plays all the way through without the problem marker, and if it works, I would copy one of the markers that works at put it into the spot you want.

Modify HREIC_VP to add new input fields

Hi All,
I need to add new custom input fields to the EEContact2Search.htm view of the HREIC_VP bsp application. Can anyone help me on how to do this?
Thanks.

Hi,
You can have multiple options.
Either you create a custom web part for new form and add your logic accordingly.
Another option is to create the custom form using SharePoint designer 2013 and add your JavaScript Code to add the controls dynamically.
Use InfoPath to create the custom form
Some of the useful links are as follows
https://support.office.com/en-us/article/Customize-a-SharePoint-list-form-c1f9283d-f704-4bbe-a8aa-827425ab31ae?ui=en-US&rs=en-US&ad=US
http://community.bamboosolutions.com/blogs/sharepoint-2013/archive/2012/09/20/how-to-create-custom-forms-using-sharepoint-designer-2013.aspx
Please don't forget to mark it answered, if your problem resolved or helpful.

Timecode Chapter Marker Input Field

Similar Messages

Maybe you are looking for