Timecode fix for Premiere CS5 with 10.7.2

I'm having the same issue others are reporting of timecode not appearing since upgrading to 10.7.2. I see a fix has been issued for CS5.5, does anyone know if one is coming for CS5?

Hi Todd,
I found this thread after having the same problem with CS5 and OSX 10.8.
My thread is here: http://forums.adobe.com/message/4863161#4863161
I feel I received a "Windows vs Mac" answer. I just wanted to know if the problem is definietly fixed in CS5.5 or CS6?
Another discussion here: http://forums.creativecow.net/thread/3/932541
says that there's still a problem with CS5.5.2 on OSX 10.6.8.
I'm running CS5 on OSX 10.8.2 and having the problem. So Apple hasn't fixed anything about an overlay conflict with CS yet.
I'd upgrade CS if someone would please just tell me which version of CS had definitely resolved the conflict. Adobe must have tested for this by now, right?
Thanks for your time,
PixelPictor

Similar Messages

Do you have a fix for the problem with Avast. Because soon I will just start using IE since Avast has worked fantastic for me. But I would rather not.

Question
Do you have a fix for the problem with Avast. Your upgrade process notifies me that it is not compatible with Avast so I always delete it. Soon I will just start using IE since Avast has worked fantastic for me. But I would rather not. Please help.

Avast needs to update their Web Rep add-on for Firefox 5.0.
You can look at the new pre-release version of Avast for Firefox 5.
* http://forum.avast.com/index.php?topic=80362.0

How can I get the CODEC DVCPRO HD 100 for Premiere CS5?

how can I get the CODEC DVCPRO HD 100 for Premiere CS5?

I did...not good luck so far, any suggestions?
¡Mucha Luz!
Tao Mijares
CEO
Mucha Luz! Productions LLC
310 994 7154
Sent from my Samsung G5 4G LTE smartphone

My first built system for Premiere CS5. Need advice to approve hardware list.

Hi All:
After some research and reading some of the posts I have cane up with the hardware list I (think) I will need to built my first editing system for Premiere, Photoshop and AE CS5. I have came out so far with an estimate of around US$1500.00, without considering yet the hard drives. I do not if top wait a little bit until prices drop or just do it. I am not sure yet if I will start with an SSD for the OS and what type yet. I will figure it out later and ask your kind advice.
As I post my list I will note what options it would be recommended for a good system. I just have a basic acknowledge of computers and excuse me if I make any insane comments. I hace seen some videos and read some other users experiences and I am very confident I can built my very first system.
I am planning to start ordering some of the parts as soon as possible (like the case, BDR) and tdo the rest in the next days.
Thanks in advance!
COOLER MASTER HAF 932 Advanced Blue Edition RC-932-KKN3-GP Black Steel ATX Full Tower Computer Case with USB 3.0, Black Interior and Four Blue LED Fans-1x 230mm front fan, 1x 230mm top fan, 1x 230mm side fan, and 1x 140mm rear fan   $139.00 after rebates
Do I need additional fans?
ASUS P8Z68 DELUXE/GEN3 LGA 1155 Intel Z68 SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS   $269.99
Which one should I choose? Is it worth paying an extra $50.00 for the 2700k?
Intel Core i7-2700K Sandy Bridge 3.5GHz (3.9GHz Turbo) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 3000 BX80623i72700K   $369.99
Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 3000 BX80623I72600K    $319.99
Should I consider this?
COOLER MASTER Hyper 212 Plus RR-B10-212P-G1 "Heatpipe Direct Contact" Long Life Sleeve 120mm CPU Cooler Compatible Intel Core i5 & Intel Core i7   $29.99
Should I consider this?
Arctic Silver 5 Thermal Compound    $12.98
Is 16Gb good enoughRam? Is G.SKILL a reliable brand? I have seen others choosing Crucial brands and going 3x4Gb (total of 12Gb). Any thoughts?
G.SKILL Ripjaws X Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 (PC3 17000) Desktop Memory Model F3-17000CL11Q-16GBXL   $139.99
Which one? Is it worth to pay an extra $60.00 for the GTX570 2560mb?
EVGA 012-P3-1571-KR GeForce GTX 570 HD w/Display-Port (Fermi) 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card   $339.99
EVGA 025-P3-1579-AR GeForce GTX 570 (Fermi) HD 2560MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card    $399.99
Which one oh these Cooler Master?
COOLER MASTER Silent Pro Gold Series RS800-80GAD3-US 800W Power Supply $139.99 after rebates
COOLER MASTER Silent Pro Hybrid RS-850-SPHA-D3 850W Power Supply $199.99
I am already using one of these and I am happy with it. I am planning to have 2 installed in the system.
LITE-ON Black 12X BD-R 2X BD-RE 16X DVD+R 12X DVD-RAM 8X BD-ROM 8MB Cache SATA 12X Blu-ray Burner with Blu-ray 3D feature IHBS112-29 - OEM    $99.99

Here are some links I've saved that talk about Win7 setup
Registry Cleaners http://windowssecrets.com/newsletter/putting-registry-system-cleanup-apps-to-the-test/
Be sure you have the default hard drive indexing OFF for all drives and folders!!!
http://www.pcworld.com/businesscenter/article/220753/windows_7_godmode_tips_tricks_tweaks. html
Temp/Cookie Cleaner http://www.mixesoft.com/
http://forums.adobe.com/thread/789809
Win7 Toolbar http://WindowsSecrets.com/comp/110210
More Win7 Tips http://windowssecrets.com/comp/110127
Utilities http://windowssecrets.com/comp/110106 (Startup Solutions)
Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
Win7 Configuration Article http://windowssecrets.com:80/comp/100218
Win7 Monitor http://windowssecrets.com:80/comp/100304
Win7 Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm
Win7 Virtual XP http://www.microsoft.com/windows/virtual-pc/
More on Virtual XP http://blogs.zdnet.com/microsoft/?p=5607&tag=col1;post-5607
Win7 Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
Win7 Adobe Update Server Problem http://forums.adobe.com/thread/586346
An Adobe Win7 FAQ http://forums.adobe.com/thread/511916
More Win7 Tips/FAQ http://forums.adobe.com/thread/513640
Processes http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
Win7 God Mode http://forums.adobe.com/thread/595255
CS5 Install Error http://forums.adobe.com/thread/629281
CS5 Help Problem http://kb2.adobe.com/cps/842/cpsid_84215.html
Win7 and Firewire http://forums.adobe.com/thread/521842
http://lifehacker.com/5634978/top-10-things-to-do-with-a-new-windows-7-system
http://www.downloadsquad.com/2009/05/29/7-free-windows-7-tweaking-utilities/
Win7 64bit Crashing and "a" fix http://forums.adobe.com/thread/580435
http://prodesigntools.com/if-any-problems-downloading-or-installing-cs5.html
Harm's Tools http://forums.adobe.com/thread/504907
Also http://www.tune-up.com/products/tuneup-utilities/
Also http://personal.inet.fi/business/toniarts/ecleane.htm
Optimizing Hard Drive http://www.video2brain.com/en/videos-5353.htm
Win7 Reinstall http://windowssecrets.com/newsletter/win7s-no-reformat-nondestructive-reinstall/
Anti-Malware Tools http://windowssecrets.com/newsletter/the-advanced-system-recover-toolkit/
Free Optimizer http://www.iobit.com/advancedsystemcareper.html
Repair AVI http://forums.adobe.com/thread/888268
Tune Vista & Win7 64bit http://forums.adobe.com/thread/436139

Tiffen Dfx for Premiere CS5 or above?

does anyone know if Tiffen have plug in for Premiere?
i found something but not sure if it will work with Premierea CS5?
any advice pls

Hey dude,
i did exactly what you wrote to me but yet nothing, and most probably i am doing something wrong!?
So, i have Premiere Pro CS5 and during the installation i installed it, in the PPRO plugins en_us folderand when i open premierre and go to the effects i don't see tiffen dfx options (effects)?
i do not know if i am missing something but would you tell me step by step how you do that on your PC?
thanks a lot

Macbook Pro Compare Question for Premiere CS5.5

Hi, I am ready to buy a macbook pro to handle premiere cs5.5 processingwedding films that I edit on my imac 27".
Due to limited budget, one part of me wants the 15" screen but the 13" is $300 less expensive with the 2.8 dual core vs the 2.2 quad core of the 15". Based on the specs below, is it worth the 300 more to get the hard drive power of the 2.2 quad core?
The 13" has 250 more GB hard drive. Will the 13" macbook pro be suitable enough to import DV film, process the final files and burn DVD's quickly and effectively?
13-inch: 2.8 GHz
2.8GHz dual-core
Intel Core i7
4GB 1333MHz
750GB 5400-rpm
Intel HD Graphics 3000
15-inch: 2.2 GHz
2.2GHz quad-core
Intel Core i7
4GB 1333MHz
500GB 5400-rpm
Intel HD Graphics 3000
AMD Radeon HD 6750M with 512MB GDDR5
Thanks!

>not quite clear what minimum of two disk drives and 7200 rpm means?
A 5400rpm drive does not transfer data fast enough for video editing
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Is there a fix for MAC Pro with Dual video cards that randomly logs off and on?

From my readings on the Internet this seems to be a know problem. That even furthers my frustrations with the latest OS X upgrades. So far on both my MACBOOK PRO and my MAC PRO it has been a major downgrade as both systems are no longer stable. Enough with my complaints...
Is there any plan to address this problem with the MAC PRO? I can't believe 10.8.1 didn't fix it. More can be read on it at:
http://jvm-technology.blogspot.com/2012/08/mac-pro-users-experiencing-random-log .html
Does anyone have work around to use dual screen monitors with the system? I have two video cards, the article says to remove one. Has this worked for anyone? Can I use dual screens with the one video card. Before I go messing around with these type of things I just want to be sure that this is a real fix. For the price of the cards and the system I really can't believe apple has this issue in the first place and has not fixed it.

Self-hosted add-ons have to be fixed for every new version of Firefox. Two to 6 months for updating an add-on is ridiculous for a program which has a new version release every '''6 weeks'''. If that extension was hosted at the official Add-ons website, Mozilla would take take care of "bumping" that extension, as long as it keeps working, for every new version of Firefox, as the new version is released.
See this thread from yesterday, I posted instructions about how to "bump" that extension for Firefox 7.<br />
https://support.mozilla.com/en-US/questions/884484
You can also use this extension to "bump" an already installed extension for compatibility with the currently installed version of Firefox. <br />
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/

Are there any fixes for iPad 2 with OS 8.1.1.

Are there any fixes for the iPad 2 IOS 8.1.1? I've had problems with Safari and other Apps crashing or locking up, and with extremely slow touch response. These problems have been occurring since the last update. At times the iPad becomes unusable. I have been keeping all programs closed and history and web site data cleared. Thanks for any help you can give.

Hi, dannilee,
I have exactly the same problem. The device was my favorite computer until 8.1.1. Now it runs s-l-o-w-l-y, requires endless reboots.
To improve the performamce, I have tried these:
1.Go to Setting->General->Accessibility->Reduce Motion. Turn on.
2.Reset iPad device settings using Setting->General->Reset->Reset All Settings. Its increase iPad performance little better.
3.Hold the sleep/wake button and home button upto 8 seconds. This will turn off your iPad. Then turn on iPad. Wait few moments. Do the same thing twice to solve this issue.
Solution 3 worked for me. And, I always recommend you to backup your iPad first before any action to avoid any data loss.
Hope it is useful for you.

Fix for Mavericks compatibility with Lacie external drives yet?

My last attempt to upgrade to Mavericks caused my 2 Lacie external drives to become unrecognisable to my mac. Update hung up too so I lost everything...luckily I had a third back up with CCC that saved me. Im just wondering if there is a fix for this now. I got no information or help from Lacie.

Exactly the same here. Installed Mavericks and La Cie no longer shows in Finder and Time Machine reminds me that no back up has taken place. As an iMac newbie where do I go from here. In my Win PC days I always backed up to an external HD on a scheduled basis without this sort of problem.

Official apple fix for 3 bars with no working wireless!

This is for all of you with internet connected bars yet no internet on your ipod touch
If you have tried everything on forums and youtube from doing the network reset to unplugging your router for 10 seconds and replugging it back in and it has not worked for you then this is what you do.
Unplug router and other internet devices for 4 minutes "not the ipod" unlike the original 10 seconds .
Plug back in your router and devices
Go to settings on your ipod touch, general , reset , reset network settings.
It will reboot.
Boom your on.
I called apple and was amazed that this works. Just make sure that router is unplugged for 4 minutes. No one on any forum has said that as a fix for internet. Your welecome.

Give apple technical support a call. They will stay on the phone with you till its fixed. They have very simple steps and know what there doing. From the problems your having. If he/she cannot fix it then call 1 more time and hopefully you will get someone with more knowlage. They fixed mine in 2 minutes and I tried everything before that

Found Fix for "Media Pending" with MPEG Videos (after 4 years)

This is for Premiere CS3.
Very often, if you make any changes to your system, or move files around, Premiere can lose track of the database that keeps track of MPEG2 video clips. The result is a persistent Media Pending display instead of your video. Cleaning the Media Cache doesn't fix it. Deleting all the temp folder media cache doesn't either. Here's what I found that works:
Go into this folder:
C:\Documents and Settings\<User Name>\Application Data\Adobe\Premiere Pro\3.0\MediaIO\Cache
The <User Name> will be your login name of the Windows account.
Delete all the files that are in this folder.
Restart Premiere and watch it re index your video and your video reapear again.
Took me FOUR YEARS to discover this one on my own!

This is for Premiere CS3.
Very often, if you make any changes to your system, or move files around, Premiere can lose track of the database that keeps track of MPEG2 video clips. The result is a persistent Media Pending display instead of your video. Cleaning the Media Cache doesn't fix it. Deleting all the temp folder media cache doesn't either. Here's what I found that works:
Go into this folder:
C:\Documents and Settings\<User Name>\Application Data\Adobe\Premiere Pro\3.0\MediaIO\Cache
The <User Name> will be your login name of the Windows account.
Delete all the files that are in this folder.
Restart Premiere and watch it re index your video and your video reapear again.
Took me FOUR YEARS to discover this one on my own!

Plug in boris red 4 for premiere cs5

I own both a PC and a mac 27 with 8 gigs of ram, I downloaded the trial version of Master Collection and cs5
Boris Red 4 for both PC and Mac. I installed on my PC and all is well, Mac in the list of program
for which you choose to install the plugin does not appear its premiere, why?

>trial version
The trial version has limitations as to the codecs it will work with
what is NOT in the trial http://kb2.adobe.com/cps/407/kb407938.html

How to Package Photoshop Extension for cs4/cs5 with manifest.xml

Hello,
tl;dr: How can I package my extension for both cs4 and cs5 in a way that respects the extension's window geometry?
I have a panel that specifies window geometry in it's manifest.xml. When the panel is installed into Photoshop's panels/ folder, the geometry gets ignored, so I'm trying to package the panel as an extension to be installed via the Extension Manager. I have run into different problems for each CS version. I've read quite a few pdfs about the Extension Manager, UCF command line packaging, etc, and have not been able to find a solution that works for both platforms.
My understaning
My trial and error research has lead me to understand that the extension's files must eventually end up in the (mac) /Library/Application Support/Adobe/<CSversion>ServiceManager/extensions/ directory. In CS5, if the extension's folder contains a manifest.xml file (ex: /extensions/GuideGuide/CSXS/manifest.xml) that specifies window geometry, Photoshop will respect that window geometry when the panel opens. However, in CS4, this is not enough. From my tests, Photoshop CS4 doesn't seem to do anything with the manifest.xml file. Instead, I had to modify /Library/Application Support/Adobe/CS4ServiceManager/ServiceManifest.xml and add my extension to it's contents. Once I did this, Photoshop CS4 launches my panel and respects it's window geometry.
The problem with this is that it's a manual installation. I can't ask my users to dig around in their system files to install my panel. In addition, since it's unsigned using this method, it won't work if they're not flagged for debugging. I've started exploring using the Extension Manager, but I have run into problems that I cannot find ansers in the few pdfs about packaging that I've been able to find.
CS5 Problems
If I use the UCF command line tool, I can package and sign my file. It installs fine and does what I want. However, using this method, I haven't been able to find a way to specify the author and description that shows up in the Extension Manager.
CS4 Problems
The UCF command line tool doesn't appear to make packages that can be installed by CS4, and I haven't been able to find one that is compatable. I've had to result to using the Extension Manager to package my extension based on a .mxi file. The problem I have here is that installing files this way limits me to putting them in the /panels directory, which then causes the panel to ignore the indow geometry. Is there a way with an .mxi file to install in the /Library/Application Support/Adobe/<CSversion>ServiceManager/extensions/ directory and modify the /Library/Application Support/Adobe/CS4ServiceManager/ServiceManifest.xml file?
There must be, because Kuler and other extensions are installed there.
Thank you SO much for any help you might provide. I've spent weeks trying to get this to work and have run into nothing but dead ends and wild goose chases.

Your extension is a CSXS extension. For CSXS extension it's introduced in Extension Manager 2.1. (You can download Extension manager 2.1 from http://www.adobe.com/exchange/em_download/em20_download.html)
In Extension Manager CS2.1 only MXP package is supported. In Extension Manager CS5 CSXS extension must be packaged by ZXP format. So you have to generate two packages for CS4(mxp) and CS5(zxp)
For CS5, you can use ucf.jar to generate the zxp package.
For CS4, you have to create an MXI file and package it by Extension Manager 2.1 to mxp package. Here is a sample CSXS mxi file:
<macromedia-extension
           name="CSXS_TEST_EXTENSION"
           version="1.0.0"
           type="Command"
           requires-restart="true">
          <author name="Macromedia" />
          <products>
                    <product name="Dreamweaver" version="10" primary="true" />
                    <product name="Fireworks" version="10" primary="true" />
                    <product name="Flash" version="10" primary="true" />
                    <product name="" version="11" familyname="Photoshop" primary="true" />
                    <product name="Illustrator" version="14" primary="true" />
                    <product name="CSXS" version="1" />
          </products>
          <description>
          <![CDATA[
          CSXS extension sample.
          ]]>
          </description>
          <ui-access>
          <![CDATA[
          Extension Name: kuler
          ]]>
          </ui-access>
          <license-agreement>
          <![CDATA[
          ]]>
          </license-agreement>
          <files>
                    <file source="test_extension" destination="" />
          </files>
</macromedia-extension>

Fix for Error 1417 with new itunes 7

This worked for me when I got that unknown error - 1417 (can't update ipod)
Step 1: Disable all third party programs and services via MSCONFIG
Article with step by step instructions found here:
http://docs.info.apple.com/article.html?artnum=302538
Step 2: Restart the computer
Step 3: Uninstall quicktime through the control panel in add/remove programs
Step 4: Uninstall itunes through the control panel in add/remove programs
Step 5: Uninstall any/all ipod updaters or ipod for window software through the control panel in add/remove programs
Step 6: Delete program file folders for itunes and quicktime:
--On the Start menu, click My Computer (or double-click My Computer on the Desktop).
--In My Computer, open Local Disk. (C Drive)
--Open Program Files.
--Right-click on the iTunes folder and click Delete from the shortcut menu.
--Right-click on the QuickTime folder and click Delete from the shortcut menu.
--Open the iPod folder.
--Right-click on the bin folder and click Delete from the shortcut menu. Note: If you are unable to delete the \Program Files\iPod\bin folder, see the "iPodService.exe Alert" section below.
--Navigate to C:\Windows\system32\.
--Remove the files QuickTime.qts and QuicktimeVR.qtx.
Step 7: Restart computer
Step 8: Install STANDALONE version of quicktime at:
http://www.apple.com/quicktime/download/standalone.html
Note: if you get an error on this page about an error occuring, just refresh. It should load. Also, there are TWO download options... one with itunes 7 and one without. You want the one without itunes.
Step 9: Restart computer
Step 10: Install itunes 7:
http://www.apple.com/itunes/download
Step 11: Restart computer
Step 12: Run itunes. You should be able to update and sync your ipod after this and no longer get that pesky 1417 error.
Also, after you have resolved the issue please see the bottom of the msconfig article for instructions on configuring windows to load your normal startup options again.

It seems like almost everybody is having this exact same problem. I bought a Nano for my wife and a iPod Photo for myself. Syncing does not work on either one and from what I read on these boards it doesn't work for most customers. Apple really needs to fix this soon.

Solution,Fix for login issue with hp connected or eprintcenter

Hi All,
I know some of you have a problem log in into new hpconnected.com. when you log in, it says "web page not found".
Here is the Work around.
1. Go to https://www.hpconnected.com from internet explorer
2. In internet explorer menu, clicks tools->compatibility view settings
3. Add hpconnected.com and click close
4. Restart the Internet explorer
5. Now Reset your password from here https://toran.hpconnected.com/oauth/ui/resetpwdpage
6. you can use same password to reset.
now login to www.hpconnected.com with your new password.
it works for me... hope it will do same for you.
Happy Printing.
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Sorry the fix that is being suggested by going to https://toran.hpconnected.com....... Doesn't work!

Timecode fix for Premiere CS5 with 10.7.2

Similar Messages

Maybe you are looking for