TimeCode Generation Filter question

My client needs me to burn a timecode onto the video so that can make edits and comments relating to specific times in the video. I am using FCP 5.1.4.
I have so far done it this way:
Generated a 15 minute slug.
Put the TimeCode generation filter on that slug.
Adjusted the crop of the slug so that it's cropped to the same size as the timecode numbers.
Is there a cleaner way to do this? I tried setting the opacity of the slug to 0% but that make the timecode invisible as well.
Any ideas and tips would be greatly appreciated.
-- Joshua

James M. wrote:
you need to nest your entire sequence and add the TC gen to that...
select the whole timeline and press option+C to nest.
I have to admit I haven't done a lot with nesting so if you wouldn't mind, let me clarify how this nesting is working to make sure I'm doing it correctly:
I select my entire sequence, called "module 1", all clips, etc. and then nest them. I'll name this sequence "nested module 1".
It creates a new sequence, named above, which I continue to do all my editing in, etc. but when I want to apply my timecode filter I do it on "module 1".
Question: When I make changes to the "nested module 1" sequence, does it continue to automatically update my "module 1" length, etc. In other words, is that relationship btwn the two sequences a snapshot or a live-connection?
Thanks!
-- Joshua

Similar Messages

Timecode reader filter

i generally use the timecode reader filter to make window dubs of a sequence, and the timecode displayed is the sequence timecode. that's fine ... now i have client needing a window dub with the source timecode displayed, specifically of the audio tracks, as opposed to the more usual (at least to me) sequence timecode. anyway to do it. thanks. i guess i can always supply an edl ...

that's cause you can't see audio, thus burn in doesn't work on audio.
nesting is a bad habit to get into. if you ever need to export an edl it will see the nest as a single event. It also makes it confusing when you have changes to your piece.
If you are exporting for an audio workstation automatic duck will export an OMF for you, however it does have a 2 gig file limit (omf does). some newer workstations such as DP6 will exchange xml with FCP

Ipod Touch 1st Generation General Questions.

I just read where the 1st generation Ipod Touch cannot upgrade software past 3.1.3. SO I assume all of the Apps I have seen and some I have downloaded that state I need newer software are not useable on the Touch I have?
Oh man it appears I got something which is basicaly useless other then playing music like my Ipod Nano can do.
Can I load any Books on the Ipod Touch?
Where can I get information as to what the limits I have with this Ipod Touch 1st Generation so I can get an Idea of what I can do and what I cannot do so I am not sitting trying to achive something that it is not capable of?
I also do not want to irritate the heck out of the community by asking questions or trying to fix errors I think I have when in reality my Ipod is not designed to do the task in the first place.
I do see Wifi on my Ipod Touch but it does not appear to connect even when I use the correct password so I assume it is limited or has to have a Specific Security setup in teh Router to connect properly and would like th know that.
I read some of the Software 3.1 Manual but it does not really go into detail as far as wifi connections just the bare basics which I know I did correct.
I am thinking that it cannot connect to WPA/WPA2 Security and I will have to Dummy down my Wifi Security to accomidate the Ipod Touch is this correct and where can I get this Information also?
I bought this Used and have no Box or any Information about it at all.
Thanks again

Decalescence wrote:
I just read where the 1st generation Ipod Touch cannot upgrade software past 3.1.3. SO I assume all of the Apps I have seen and some I have downloaded that state I need newer software are not useable on the Touch I have?
Oh man it appears I got something which is basicaly useless other then playing music like my Ipod Nano can do.
Can I load any Books on the Ipod Touch?
One if you can find an app that support the book format. Many book are available in non-DRM pdfs and I think you can find an app that will read pdfs. As you likely know, iBooks is not compatible with the 1G
Where can I get information as to what the limits I have with this Ipod Touch 1st Generation so I can get an Idea of what I can do and what I cannot do so I am not sitting trying to achive something that it is not capable of?
I know of no such document or site.
I also do not want to irritate the heck out of the community by asking questions or trying to fix errors I think I have when in reality my Ipod is not designed to do the task in the first place.
I do see Wifi on my Ipod Touch but it does not appear to connect even when I use the correct password so I assume it is limited or has to have a Specific Security setup in teh Router to connect properly and would like th know that.
See below for wifi problem
I read some of the Software 3.1 Manual but it does not really go into detail as far as wifi connections just the bare basics which I know I did correct.
See below
I am thinking that it cannot connect to WPA/WPA2 Security and I will have to Dummy down my Wifi Security to accomidate the Ipod Touch is this correct and where can I get this Information also?
See Below
I bought this Used and have no Box or any Information about it at all.
Thanks again
For wifi problem:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
The last should identify what encryption works with the 1G.

Adobe Acrobat 8 and I Filter Question

Hello,
I have Adobe Acrobat 8 and I Filter 6.0 installed on a WinXP machine. I am also using Windows Search 4.0. My question is on how to create an embedded index of PDF files so that I may search with a keyword through 100 PDF files as an example. This is actually my last resort after searching thoroughly on the web. I have read articles ranging from editing the registry to how to create a single index within Adobe Acrobat for a single PDF file. Again I am looking to create one index that consists of multiple PDF files. If any can help me I would very much appreciate it. I just say to myself that at some point in time some programmer must have said to himself, can I search for a keyword through 20 PDF files on a desktop system or server?
Thank you,
Peter

Hey john,
Please try downloading Acrobat 8 from the following link:
Download Acrobat products | 9, 8
Regards,
Anubha

Library Filter Question

Within the Metadata Library Filter I often use the 'Treatment' tag to view just colour or just B&W images. I discovered that to give an image the 'Black & White' treatment stamp you needed to use the B&W section in the develop module. However I often use CS5 for my B&W conversion so my question is, is it possible to get this "Black & White' treatment stamp without actually using that aspect of the Develop module?
Thanks in advance guys

Unfortunately not.
Your black and white photos made in Photoshop, will be treated as "Color", even if they were converted to a grayscale "space" in Photoshop. And you cannot even change the treatment to "Black and White", because the treatment control is disabled for grayscale files. This is a little dumb.
My work around is to apply a "BW" keyword to these files, then use a smart collection with the following rule set:
Any of the follwofing:
Treatment is "black and white"
Keywords contain words "BW"

Filter Question part II

Hi,
do you remember my previous post? Well, now I've a similar requirement, but again I haven't a solution. i've following question:
I've a prompt with two choices: "All" and "WITHOUT ICO" wich fill a presentation variable 'ICO'. Then i've a report that contains a column "JDE Account" wich contains accounts id (if an account is ICO then it will finish with letter I, otherwhise not.
Examples of ICO Accounts: 1384I, 14849I and so on
Examples of WITHOUT ICO Account: 3893, 4484.
I want that if user choices 'ALL' prompt value the report returns all accounts, otherwhise if user choices 'WITHOUT ICO' prompt value the report filter only accounts WITHOUT ICO.
I've tried many filters (simple filters and complex), but it doesn't work. Can you help me???
Thanks
Giancarlo

Hi,
i've tried but it doesn't work. I give following error:
Error during retrieving drilling info: SELECT "Cost Center"."Organization Region Description" saw_0, FILTER(Prototype."Fact PNL"."Local Actual Monthly" USING Prototype.R012."R012 1 position Code"='A') saw_1, FILTER ("- Budget"."Local Budget Monthly" USING Prototype.R012."R012 1 position Code"='A') saw_2, FILTER(Prototype."Fact PNL"."Local Actual Monthly" USING Prototype.R012."R012 1 position Code"='A')-FILTER ("- Budget"."Local Budget Monthly" USING Prototype.R012."R012 1 position Code"='A') saw_3, (FILTER(Prototype."Fact PNL"."Local Actual Monthly" USING Prototype.R012."R012 1 position Code"='A')/FILTER ("- Budget"."Local Budget Monthly" USING Prototype.R012."R012 1 position Code"='A')-1)*100 saw_4 FROM Prototype WHERE (Time."Year" = 2010) AND (Time."Desc Month" = 'January') AND (Country."Country Code Company GOAL Code" IN (SELECT saw_0 FROM (SELECT Country."Country Code Company GOAL Code" saw_0 FROM Prototype WHERE Country."Company Description" = 'GERMANY') nqw_1 )) AND ("JDE Account"."HFM Account Code" in (Select "JDE Account"."HFM Account Code" From Prototype where ‘WITHOUT ICO’ = ‘Tutti’) OR "JDE Account"."HFM Account Code" in (Select "JDE Account"."HFM Account Code" From Prototype where "JDE Account"."HFM Account Code" not like ‘%I’ and ‘WITHOUT ICO’ = ‘WITHOUT ICO’))
Error Details:
Error Code: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Driver Odbc returns an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <ICO’>: Syntax error [nQSError: 26012] . (HY000)
Istruzione SQL eseguita: {call NQSGetLevelDrillability('SELECT "Cost Center"."Organization Region Description" saw_0, FILTER(Prototype."Fact PNL"."Local Actual Monthly" USING Prototype.R012."R012 1 position Code"=''A'') saw_1, FILTER ("- Budget"."Local Budget Monthly" USING Prototype.R012."R012 1 position Code"=''A'') saw_2, FILTER(Prototype."Fact PNL"."Local Actual Monthly" USING Prototype.R012."R012 1 position Code"=''A'')-FILTER ("- Budget"."Local Budget Monthly" USING Prototype.R012."R012 1 position Code"=''A'') saw_3, (FILTER(Prototype."Fact PNL"."Local Actual Monthly" USING Prototype.R012."R012 1 position Code"=''A'')/FILTER ("- Budget"."Local Budget Monthly" USING Prototype.R012."R012 1 position Code"=''A'')-1)*100 saw_4 FROM Prototype WHERE (Time."Year" = 2010) AND (Time."Desc Month" = ''January'') AND (Country."Country Code Company GOAL Code" IN (SELECT saw_0 FROM (SELECT Country."Country Code Company GOAL Code" saw_0 FROM Prototype WHERE Country."Company Description" = ''GERMANY'') nqw_1 )) AND ("JDE Account"."HFM Account Code" in (Select "JDE Account"."HFM Account Code" From Prototype where ‘WITHOUT ICO’ = ‘Alli’) OR "JDE Account"."HFM Account Code" in (Select "JDE Account"."HFM Account Code" From Prototype where "JDE Account"."HFM Account Code" not like ‘%I’ and ‘WITHOUT ICO’ = ‘WITHOUT ICO’))')}
However i haven't a column All.
Thanks
Giancarlo

Filter Question 1: Shift Field - when to shift it?

And by "shift it", I'm really asking in what order to place it, relative to any other filters being applied. And is there a rule of thumb for this particular filter being first or last in the stack?
The Specific Issue:
I notice FCP applies the filter automatically when I add HD material to a standard def Timeline (see "Workflow" description below), where the extra material has a different "Field Dominance" than the main footage. This triggers a green render bar, which thankfully doesn't take long to process.
But I'm starting to see some odd behavior when I then add other filters to one of these clips whose Fields have been automatically Shifted by FCP.
Specifically, I've been testing MagicBullet's "Noise Reducer" filter on a few of these clips (ones where I've had to magnify the image more than it really wants to be), and once the absurdly long render finally finishes*, the playback of just these clips gets very wonky on my external monitor (with a flashing blue that eventually takes over the whole screen, but only for these clips -- and FinalCut's telling me there's nothing left to render).
* and this is the subject of a whole 'nother filters-related question I've posted in this same forum
Interestingly, when I drag the Shift Fields filter from its default top-of-the-stack position in the Viewer down to the bottom, so that it comes after the MB Noise Reducer -- and then wait for another huge render to finish -- now everything seems to play back fine.
Both filters (FCP's Shift Fields and MB's Noise Reducer) are configured in their default settings, and this apparent conflict with the Shift Fields filter appears to not occur in relation to any other filters I've also been testing (such as Sharpen and Deflicker).
So -- is this just one of these trial-and-error things, where you keep reordering the filters till they seem happy, or is there a reason why the automatically applied Shift Fields filter should always be last in the stack (even though intuitively it feels like something which should be applied first)?
Any insights appreciated.
Thanks,
John B.
Toronto
*Workflow Description*
(which might be of interest to other one-man-band, tight-budget videographers)
+I'm currently cutting a series of videos done for a local theatre company. My A-cam is a Sony MiniDV shooting 4:3, and my Timeline is the basic NTSC-DV easy setup. I generally also set up a B-cam at a different angle, which is locked off to get a static shot of the full performing area. This camera is a compact AVCHD unit, shooting at full 1920x1080. I put its material on a separate video track, and when I need to cut to it I use the Motion tab to frame the shot, resize it, and crop in as desired. Sometimes I'll even keyframe a pan and/or slight zoom to give the effect of a human cameraperson following the action live. Since both cameras are recording continuously, I only have to sync up the two tracks once -- and the end product gives a reasonably convincing impression of a two-person shoot.+

Clearly I need to check in with the Jolly Red Giant himself, since I'm wondering if he's the one I should be pointing my finger at with regard to a bizarre issue I'm encountering: trying to export a previously harmless sequence which now contains clips with two Red Giant / Magic Bullet filters -- all fully rendered, but the Export time is expanding faster than a Supernova.
Thread is called "Renders Gone Wild", if you have any advice on what I should do.
Thanks,
jb

Aggregation level and planning filter question

Hi,
I have below questions on aggregation levels and planning fitlers.
Scenario: An Aggregation level is built on a multiprovider( Actual Cub1(5 chars, 4 keyfig), Actual Cube2(8 chars, 6 key fig), and Real Time Cube3(8 chars and 3 keyfig)). A FOX copy function has to be built on this aggregation level in which data from cube1 will be copied to cube 3.
1. Does an Aggregation level need to have all chars and keyfigures from cube 1 and cube 3? or it should have structure of Cube 3 only as data will be written to cube 3?
- what are the standard design considerations for defining aggregation level?
2. In planning filter, both cube1 and cube3 are to be restricted or only cube3?
Is it necessary that only target planning cube is to be resricted? In that case how function will get the source data from cube1?
- what are the standard design considerations for defining planning filter?
Please provide some info on this...
any document on design consderations for planning object will be great.
Thanks,
Pundari.

Please go thru the following link u will find step by step procedure for IP:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0568315-7727-2d10-d4ba-88ab69e16577?quicklink=index&overridelayout=true
Please provide ur valuable points if it is helpful:)
Regards,
Prasad.

Simple filter question

I have a dataset of many years data. I want to show the count of records for each of the past 7 days.
If I add date and record count then run the query, I add a variable:
=RelativeDate(CurrentDate(); -7) < [Date]
Then in the report filters panel I filter by this variable = 1, and the correct result returns. However, with a filter at this level I guess all the data is returned from the database for many years, then on a second step the data is filtered. We have a lot of data so I would like the filtering to take place in the first step, on the original query. I can't see how to use a variable or enter a formula into the query filter panel. I could add this to the universe, but then we will end up with a lot of "filter 7 days", "filter 30 days", ...
Questions: What is the best way to filter by past 7 days, or how can I add this formula to the query filter?

Josue,
Suresh gave a good answer, however, to get back to your original question:
Questions: What is the best way to filter by past 7 days, or how can I add this formula to the query filter?
It is always more efficient to filter at the server (database server) level versus bringing more data to the workstation (client), however, for each filter, as you are observing, it requires an object filter to support. Another way to handle this particular situation might be through the use of a prompt. You could prompt the user for the number of days (7 or 30, etc) and then you could use one filter object and have maximum flexibility.
Thanks,
John

Noisy Analogue Signal and Lowpass Filter Questions

Hi everyone,
I am getting analogue signals from a strain gauge that are a bit more noisy than I would like... Normally, I jump right in an smooth the signal using a lowpass filter of whatever order gave me the result that was acceptable, without overkill and smootig the signal to nothing... However, I am settingup a new DAQ device and would like to a little more informed about what and how am doing this...
So, here are my questions:
1. How do I determine the filter order? I usually use a 2nd order filter for smoothing.. I understand the comncepts of roll-offs and phase delay as they relate to the order numbers... On what basis should I decide which order filter to use for this specific signal?
2. I am still thinking that using a lowpass filter is the best approach... I assume the lower cutoff freq is in Hz (i.e. 10Hz) and is NOT a normalised freq [i.e. cutoff freq / (sample rate/2)]?.. The default value is 0.125, which seems too low for a Hz value? Also, on what basis should I decide what cutoff freq to use for this specific signal?
3. I need to synch the filtered strain gauge signal with other, unfiltered signals... But as the filter will add a phase delay it will affect signal synchronisation... I heard somewhere that a 4th order filter is zero-phase, but I can't see how that could be right as the filter only operates in one direction... Any suggestions for what I could do to maximise the timing alignment between the filtered and unfiltered signals?
All comments welcome!
Regards,
Jack

Jack,
I was the Instrumentation Engineer at a university for 24 years and worked with several execise physiologists, biologists, and neuroscientists on similar projects. My group was the "lab/tech staff" you have little of. There were 3.5 (engineer, 1.5 electronics technicians, and machinist) of us for the entire university.
OK. The strain gauge signals probably have no information above a few tens of Hz (hummingbirds) or a few Hz for most larger species. EMG is usually filtered in the amplifiers to slightly larger bandwidths (few hundred Hz) unless you are trying to see the individual action potentials. Does the dynamometer have specifications on the bandwidth or sampling rates used?
Since your bandwidths are realtively low, I suggest that you sample all the analog inputs (and the trigger outputs, if the boards have the capability) from the same clock. You can later decimate or average data on channels where less data is needed. Record the trigger signals on an unused analog input if you have one available. It can be very handy to have the information about when the triggers actually occurred in the same dataset as the response data.
Delay equalization is a complex topic. Suppose that you are sampling all your channels at 1 kS/s. Suppose you have a 10 Hz low pass filter, 2 pole Butterworth, on a strain gauge channel and a 50 Hz filter, 4 pole, elliptical, on an EMG channel and you want to synchronize the filtered data with some unfiltered channels. The two filters have very different phase and delay responses over the 0-500 Hz frequency range. To equalize you would need to determine the maximum delay at any frequency in the range for both filters. Then you would need to design THREE all-pass filters. One would have a phase response which compensates the 10 Hz filter. Another would compensate the 50 Hz filter. These would need to be designed so that the total delays through the low pass plus all-pass filters is the same. Then you need a third all pass filter with that same total delay to compensate the unfiltered data. This is may be a non-trivial job for an expert, depending on the low pass filters.
What kind of noise are you seeing and how is it affecting your measurements? Can you post some data?
Lynn

Timecode Generator Filter does not match Source Timecode

Hi have a feature that is an uncompressed apple 8bit QT. Frame rate is 23.98fps exported from final cut.
I added the timecode filter to it and where my film starts on a 2pop at 00.59.58.00, compressor reads it at 00.59.54.10. I experimented with the frame controls etc, but no luck.
Any helpful ideas from the pros out there?
thanks

I don't have any real solution for you, other than to say we appear to be in the same boat.
See this thread where I've posted about the problem with some detail (and my labor-intensive quasi- workaround):
http://forums.creativecow.net/thread/98/868971#871544
Of course, my post-compression workaround won't help you with actually burning in the proper TC when using Compressor.
Where do we submit bug reports about Final Cut Studio and/or Compressor?
-Matt

Buying First Generation Air-Question of Heat and Performance

Do the first generation AIrs handle simple video watching OK and is watching video choppy? Also are the fans very noisy during simple and normal operations like word-processing or internet surfing, or do these machines easily overheat?
thanks

Hey all,
I own a first gen MBA for about 3 months now. It is a highly durable machine and has never let me down. I do all kinds of stuff, from office applications to video editing and even 3d rendering using 3dsmax in a virtualbox running XP on the MBA. I take it almost everywhere I go.
My experience with heat is, that the most important thing is to keep the vents on the bottom clear. All my slowdowns and heat related issues came when these vents where blocked. I can hook the MBA up to my 1280x720 projector and watch a movie or two without slow down-issues. I put it on the floor and the vents are clear. Temp and fans go up, but no kind of performance problems. If you put it on carpet or on your bed, the problems begin, as than the ventilation gets blocked.
But, to answer the threadstarters question: performancewise you can do anything on the MBA as you would expect to do on any other Core 2 Duo-CPU. It has two cores, afterall. Problems is: if you cut the airflow to it, one of the cores is shut down.

Some more filter questions

The header of not yet recognized spam displays the following:
X-Spam-Status: No, hits=2.2 tagged_above=-999 required=3 tests=HTML90100, HTML_MESSAGE, HTMLTAG_EXISTTBODY, LOTSOFSTUFF
1. Will this hits number go up over time if people keep redirecting this spam e-mail to the server?
2. Does the spam filter only run these 'formatting' tests (HTML90100, HTML_MESSAGE, HTMLTAG_EXISTTBODY, LOTSOFSTUFF) or does he also decide upon the words in the spam? So that if a word like '*****' shows up twice or more, he will consider it spam?
Thanks.

This question does not need to be answered. I went to spamassassin's website and the whole filtering logic is somewhat clearer to me now.

Patch Wizard - Support Filter question

I've installed the Support Filter on my 11.5.10 CU2 system and ran it as a test to make sure my system would qualify for Extended Support.
The overall status of the job shows Recommended=0 and New Code level=0 so at first appearance it looks good.
However if I check the job status and sub requests of my 'Support' job I see a couple of requests that ended with warning.
The first job 'Submit Recommended Patches (wrapper) shows this in the Request Log:
**WARNING: Some patch information not uploaded correctly**
Patches which encountered problems during Upload:
1. 2147366
2. 2372715
If I look a little closer I see there are some INFO lines that say:
INFO: The patch does not contain f2147366.ldt since it is an old patch. Patch Advisor cannot be used for this patch.
INFO: The patch does not contain f2372715.ldt since it is an old patch. Patch Advisor cannot be used for this patch.
The jobs after that finish as Completed Normal" but the last job PWSTATUSTRACKER ends with 'warning' and the request logs shows:
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
Status Tracker: This request set is the dummy request to track the status of individual requests and assign the right status to the request set
Current request id : 783826
Current request set id : 783544
783783 Normal
783779 Normal
783776 Normal
783774 Normal
783771 Normal
783546 Warning
783825 Paused
Overall request set Status is Error
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
So is the overall status 'warning' due to the error where a couple of patches couldn't be uploaded but otherwise looks good.
My next step would be to submit a 'Recommended Patches' job or the 'Recommended and New Code Levels"?

Hi,
So is the overall status 'warning' due to the error where a couple of patches couldn't be uploaded but otherwise looks good.You will need to download those patches and apply it manually -- Please see (OAM PADOWNLOAD AND PAANALYSIS CANNOT DIFFERENTIATE BETWEEN 11.0 AND 11i PATCHES [ID 352212.1]) for details.
My next step would be to submit a 'Recommended Patches' job or the 'Recommended and New Code Levels"?Please see (Patch Wizard Utility [ID 976188.1]).
Thanks,
Hussein

ESB Filter question

Hi,
I'm developing an ESB that polls for a file (unix), truncates a table (using a database adapter) and then uses the data file to re-populate the table (database adapter). My file has 4900 records. The file adapter has been created to process records in batches of 1000. The file reading routing service, invokes the database adapter to truncate table. A second routing service then invokes another database adapter using the data read in batches to merge into the target table.
This appears to be working for single batch instances (i.e. small number of records). I want to establish a filter on the invocation of the truncate database adapter, to ensure that the truncate does not happen prior to each batch of records processed. Is this required? At the moment I have a filter attached in the following form;
position() = 1
When I deploy the data file to the polled directory the process begins, and the instances appear in the ESB Console (5 of them, there are 4900 records in the data file). Each instance appears to go through the truncate database adapter (i.e. the green line extends through to the truncate box on the diagrammatic representation of the ESB instances).
I have added trackable fields via the console and see that "position() = 1" is true for each batch/instance.
Is there a way via filter and routing to restrict the truncation to only the first batch of records processed? I must say that the table appears to be only truncated once and all the data is appearing the table upon completion. My concern is that the diagrammatic representation may at some stage become accurate and at some stage I will end up with only 900 records in my table instead of the 4900 records that are in the data file.
Hope this makes sense. I don't think that is a version issue, but for the record.
Solaris 10.? App Server
Database Oracle 10.2.0.2
JDeveloper 10.1.3.3
SOA Suite 10.1.3.1.0
Thanks Kevin.

The issue is that the routing service is sequential. We have a few adapters on the same routing service, and we observe that the message moves through the adapters sequentially.
We are going to try to break out the routing service and end points so that each process dequeues from AQ, goes to one routing service, and one end point. Hopefully this way, there won't be any blocking, and all RS and endpoint can execute independently. The concern then is having a multi-consumer AQ, and I'm not sure if there are any issues with it.

TimeCode Generation Filter question

Similar Messages

Maybe you are looking for