TIMECODE Mismatch Premiere and Audition

I exported an Aiff file from Premiere. 23.976. Brought it into Audition. Did some work on it in the waveform editor (not the multitrack) saved it and re-imported to Premiere Pro. The audio is significantly longer and out of sync.
First… I know there is a way to send Audio over to Audition and round trip it back but it sends all the individual edited clips. I needed to send 1 Audio track that I could clean up.
Apparently Audition is converting the frame rate… I assume to 29.97. Can't figure out how to prevent this.
I tried it with a wav file export from Premiere as well. Same issue.
Is there a workaround or better workflow I should be looking at?
Thanks!
TAK

ROFL!
That would've helped to know. But remember, Premiere will not be able to use the later WAV formats that support more than 4gb. IF your audio is really big, start with an "Empty Movie" file (MOV or AVI with only audio), which of course is my usual second step (I do a log and transport outside of adobe first). Once in that format I go to audition, and drop it to FLAC lossless. Been trying that for a short time, and FLAC seems to handle what I need without extra overhead. CAF, while a very accurate and useful, capable of splitting into cacheable chunks, and compatible with most software I use, it's not a popular format. If you absolutely know you're not sending to an audio engineer, use it; otherwise, use FLAC or another popular format.
RED formats are compatible, and even have presets that you can utilize for conversion. However, like the prores codecs, you need to either remain in that format by copying the presets for AME into the locations for premiere (in the program\app files there's a folder for preview settings that can point to new codecs), or use the AME presets to transport to a new format (Prelude works for this log and transport with formats that are single container based, i.e. that show up as a single file and not multiple transport streams).
I like prelude, but unfortunately I often get stuck using Quicktime or FCPX to log and transport.

Similar Messages

Can Adobe Premiere and Audition "Royalty Free" music files be used for "commercial" projects?

I apologize for not being able to find this answer on my own but can anybody please answer this: Can Adobe Premiere and Audition "Royalty Free" music files be used for "commercial" projects?

SusieBird
Are you using any version of Premiere Elements? Or, is it that you are really asking about some version of Premiere Pro and Audition?
If the latter, please refer to
Premiere Pro
Audition CS5.5, CS6 & CC
In the Adobe Premiere Elements Forum in which your thread has been posted, it has always been written by others (Bill Hunt, Steve Grisetti) that
Premiere Elements users can use Premiere Elements assets for commercial projects. I do not use Audition, so I cannot speak to the Audition situation.
We are a user to user forum here and not Adobe. The ultimate answers on this would be from Adobe itself to avoid what is written and what is written between
the lines.
ATR

Live action between premiere and audition

when I edit video's I usually use premiere pro and audition (both cs6)
but is there a easy way to combine those programms?
for example, when I import a video in my premiere timeline, the audio (maybe video to) will directly show up in audition.
Is there a way to do this or would it be an idea for a next version?

R click on a clip or a sequence and select "Edit in Adobe Audition". The audio in your clips or sequence will be replaced by a new clip(s) with "extracted" added to its/their name(s).
Extracting a sequence is a much quicker way than extracting large numbers of separate clips - you can edit each clip's audio separately once you are in Audition.
Note that only that part of the clip which is used in the timeline will be extracted for editing, so you may need to add handles. I sometimes create a new sequence with entire original clips in it when I want to edit the audio of a number of my clips..

Premiere Pro CS4 and Audition 3 problem!

Please help! I have CS4 Premiere and Audition 3 I update Premiere to version 4.2 and I got to edit in Audition, but dark and I can not hit. When I push edit original, audition opened and the processed sound. When I want to save the file leaves me a window that can not be done because the file is open in another program. Thanks in advance reply.

The solution is very simple,:
This update resolves the question.
This update install modification in dynalic link to support adobe autition3 instead of soundbooth.
This updaye , also adds support for AAF import/export, Apple Final Cut Pro XML project import, and OMF export, along with
numerous other stability and quality improvements. The update is recommended for all Adobe Premiere Pro CS4 users.
An important detail is that this feature only works in Windows. Sorry ´bout the poor MAC software.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4088
The home page of all updates for Premiere Pro CS4 is here :
http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Windows
Reinstalling all the apllication and if the aplication is standard CS4 (4.0) this acti0on will not resolve the issue.
My recomendation is to install update 4.0.1 and 4.1.0
Others like 420, 421 is apllicable only if demand use of large avc intra, red format and p2 with h264 and other improvments
Best Regards,
Leon Unger
Adobe Certified Professional

How to let Premiere or Audition put Extracted audio clips into a desired folder when clicking "Edit clips in Audition"?

I recently did Volume Match for entire feature film dialogue clips, what happened is I found lots of extracted audio clips scattered around in my Media hard disk, luckily I only have one Hard disk for all media, I look it in Preferences in both Premiere and Audition, there is no such setting to put all extracted audio clips in one designated folder. Anyone has any solution to that?

When I send a Premiere sequence to Audition it makes a subfolder with the same name as the Premiere sequence I sent from automatically. All I have to do is specify a path before I hit OK. If you are sending one clip at a time it seems to save that extract next to the Premiere project file.

If I purchase or subscribe to creative cloud, will this include adobe premiere pro, after effects, photoshop, illustrator and audition?

If I purchase or subscribe to creative cloud, will this include adobe premiere pro, after effects, photoshop, illustrator and audition?

Here is a link to a page that shows all of the Cloud applications...
All Cloud Applications: http://www.adobe.com/creativecloud/catalog/desktop.html

Premiere Pro CS6 and Audition CS6 not playing any media

I'm having a problem with both Premiere pro and Audition CS6 not playing back any media when I hit play. The play button shows that it should be playing back but the playhead doesn't move at all. I'm on a late 2011 Macbook Pro running Mountain Lion 10.8.2 with 16gb RAM and an SSD. I've already completely uninstalled and reinstalled both application multiple times to try to get this working. Any help would be greatly appreciated.

1st, More information needed for someone to help... please click these links and provide the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
2nd, What are you editing, and does your project match your video?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
3rd, Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341

Premiere Pro and Audition workflow problem (urgent!!!)

Hello! These is my problem: I need to Edit clip in Adobe Audition but with many clips of an interview, fix noise problem, save and back to premiere whit those clips remain linked. There is a way to do this?
I use CS6 version!
Sorry for my bad, really bad english! Thanks!!

Master Collection, Production Premium and Creative Cloud should include both PP and Audition.

Suites containing Premiere Pro and Audition

Hi folks
Sorry for the odd question. I'm curious to know exactly which suites Adobe offers that include Premiere Pro and Audition. Is it only the Master Collection or are there others where fewer apps are included?
I'm trying to configure a PC with just what I need on it and acquiring Master Collection is simply overkill and a bit like swatting a fly with a bazooka.
Cheers... Rick

Master Collection, Production Premium and Creative Cloud should include both PP and Audition.

Premiere Pro & Audition tifferent time settings and cant edit anything correctly.

In Premiere Pro i put video, edit it in After Effects but audio in Audition.
When all is correct then i speed up video in Premiere pro but since audio speedup is shi-bad therefore i speed up in audition BUT ITS IMPOSSIBLE TO GET CORRECT TIME LINE IN PREMIERE TO PUT IN IN AUDIOTION.
In Audiotion Effect/Time and pitch/Strech and pitcher when i put same speed as in Premiere, Audition does the opposite.
Thats one fuc-bad bug/difference. Ok. So then ill try to hover with mouse video i just speed up lenght in Premiere. Hovering gives in, out point times and total time of clips leght. Right? Maybe.. couse if i put that lenght in Audidiotion as desired legnght, clicked save and ctrl+s alt+f4 and see in Premiere.. THEN IS SOMEHOW A LOT SHORTER THEN IT WAS SUPPOSED TO BE.
In Idiotion i can change time settings and none helps.
In PremiProion i can change to audio time and that isnt corrent also.
Even just opening audio in Audition from Premiere without speed up they show whatever you change a different times.

Clip with Video/Audio i put in Premiere
Divided
Video clip right click replace with After Effect composition.
and what i do in premiere doesnt matter couse lenght i ckeck in Premiere hovering over other example video (to see the lenght witch to write in desired Audition speed up couse in audition 115% speedup is speedown for any illogical reason)
So Original ivdeo/audiot i speed up to see leght hovering with mouse over
BUT in Audition it shows ( i dont care what it shows i just need to put correct value in percentage in Audition but since that also doesnt work i need to know correct leght)
SO how long video i need?
In premiere audio original leght witch is now open in audition
OR in speedup settings
LOL WUT? Different duration bug also and doesnt change ANYTHING couse differences allways were for one clip- too long for other too short when using times from premiere.
SO 115 % eh? If we dont look then all is fine and i dont care what is in premiere in end and i dont need to read that duration is now too long. I would automatically just save export and then in hollywood only see something was wrong with this premieridiotion software but not my assumtions.
Ok since i saw that 115% in premiere now turnet too long..
I check whats wrong for some time. Then i try all again slow and i see there duration.
Ok i enter duration witch we now check in premiere (where else?, the clip is shortened in premiere)
AND NOW ITS TOO SHORT
Heres time settings. NONE SHOW EXACT LENGHT OF AUDIO SAME AS IN PREMIERE
SO what are time FPS in Premiere? Whats the difference? Shouldnt they work at least on some standarts?
ps. also adding to bug of ****** Premiere audio speed up and solution bugs in Audition, here another bug- YOU CANT ENTER THIS CUSTOM FPS SPEED AS I SEE IN PREMIERE IT WANTS TO WORK WITH AUTOMATICALLY 24,81 fps
AND WHY WOULDNT THEY BE AUTOMATICALLY SYNCHRONIZED if audio is LINKED TO PREMIERE???

Bouncing - Premiere to Audition to Premiere - How to change default save location from Desktop

When I am bouncing from Premiere to Audition "Edit Clip in Audition", and then apply the effect and save the file, it seems to save the file to the desktop. Is there a way to change this default save location? Can't seem to find it in the preferences.
Didn't even realize it was doing this. Desktop was getting pretty cluttered.

You can paste this command in Terminal
defaults write NSGlobalDomain NSDocumentSaveNewDocumentsToCloud -bool false
Or use Mountain Tweaks - click the Mountain Lion tab & it's the sixth item in the left-hand column.
Both will disable the default iCloud save & still let you have access to iCloud if you want it.

Can't download Adobe Premiere and After Effects

I just bought a 1 year deal for the Creative Cloud. As far as I understand, all the software from Adobe would be available in the Creative Cloud. But when I try to downlad for instance Adobe premiere, this program don't show up in the Adobe Application Manager. What is wrong? The "onlye programs that shows up is Photoshop, InDesign, Flash Pro, Illustrator, Fireworks, Muse, Dreamweaver, Audition, Prelude, Lightromm, Flash Builder, Edge Acrobat X and Touch App Plugins. Anyone knowing what might be wrong?

Win7 pro and, unfortunately, 32 bit... Guess I should consider an investment then...
Thanks for the info.
Kind regards,
Tormod Sperstad
Sendt fra min iPad
Den 29. aug. 2012 kl. 21:04 skrev "John Waller" <[email protected]<mailto:[email protected]>>:
Re: Can't download Adobe Premiere and After Effects
created by John Waller<http://forums.adobe.com/people/John+Waller> in Adobe Creative Cloud - View the full discussion<http://forums.adobe.com/message/4658052#4658052

Premiere (and AME) will not export 23.98 DV NTSC properly

Half an hour of frustrated internet and message board searching have brought me no closer to a solution. I'd be grateful for someone's help. I can't be the first person to have encountered this problem, but no one else seems to be talking about it.
I have HD footage that was shot at 23.976. I've edited it in a 23.976 timeline, and when I export to Quicktime in its native codec (which is Cineform) or any other codec, at 23.976, I get a 23.976 file. No problem.
But when I try to export DV/NTSC 24p, it SAYS it's going to export at 23.976, but then when I open up the resulting file, it's at 29.97 and there are extra interpolated frames added. Same thing happens if I try to convert it after the fact with AME from a 23.976 HD export.
It's driving me apeshit. I need a true 24p DV-NTSC quicktime for the sound mix, and I'm at a total loss for how to create one, short of switching (back) to FCP.
So what gives?
Details:
I'm on an iMac 21" running Premiere and AME CS6, thought I've tried it also in CC and get the same result.

I'm not trying to be difficult or contrary. Honestly, I'm not. And I'm not "unwilling to take the input from the other posters". But so far none of the other posters have actually answered my question, and one of them got snippy with me when I pointed out why his solution was not valid for my particular problem.
People have suggested various reasons why it can't be done, but I know it can be done because I've done it. And I've posted the evidence. The Quicktime in the picture above plays fine out of the firewire DV port. It imports properly into Pro Tools at the proper frame rate, while maintaining the proper timecode. This particular example doesn't have timecode burned into the video, but on ones that do, a pulldown to 29.97 means that I no longer get frame-accurate timecode on the video. It also means that the sync pops can drift half a frame because they are now in 29.97instead of 23.976. It means that I can't import the video into a Pro Tools project that already has a 23.98 video in it, since Pro Tools won't let you mix frame rates. It also means that I can't do my sound editing with frame-accurate video, which is unacceptable. So this is not a solution to my problem.
Others have suggested that I just use a different codec. That's not a solution to my problem either, since I need it to be DV/DVCPRO. I didn't invent Pro Tools and I have no control over what formats it will accept for firewire output. So that's also not a solution to the problem.
To everyone who has answered so far, thank you for your input. I appreciate it. I'd be really grateful if anyone could chime in with an answer to my original question: How do I create a standard definition DVCPRO 24p Quicktime in Adobe? Maybe the answer is that "Adobe doesn't have this functionality". But that's a different answer than "It can't be done, period."

Editing Multiple Audio Clips From Premiere in Audition

Hi there,
I am working with video/audio in Premiere that has frequent cuts (although the audio is derived from two files) and I need to edit all the audio files at once, rather than one by one, in Audition. I was hoping to this by nesting the audio in Premiere but I am not able to edit the nested file in Audition after this.
If anyone has any ideas of how to work with and apply the same properties to multiple audio clips from Premiere in Audition I would greatly appreciate it.
Thanks...

Hi everyone, I also have a trouble with cs6. I just record 3 tracks in the early today, then when I got home, I saved as sexs file ( wrong decision). After that, I went back and try to open the file, it can't file the recording tracks. The only one thing still exist is my beat, what should I do to recovered it? thanks for helping me out of this.

Exporting layers of audio from After Effects cs6 to Premiere / or Audition? Is this possible?

exporting layers of audio from After Effects cs6 to Premiere / or Audition? Is this possible?
Help - I have an After effects project with multiple layered files and want to copy these to Premiere / Audition. For example I know if you select multiple video files from After Effects these can be pasted straight into Premiere intact - but this does not work with audio. I want to take existing layered audio files from After Effects to Audition / or Premiere but can't copy and paste - is there a simple solution for this?

Hi thanks Dave for responding - yes that could work as a 'workaround' - I was hoping there would be a way I can keep the existing independent audio layers and corresponding audio levels from After Effects- in the same way I can copy and paste video files from After Effects to Premiere - rather than exporting a flattened AIFF /WAV from After Effects.
This would then allow me a lot more control working on the final edit - especially as currently a lot of the audio layers overlap. It does seem there is no simple solution for this, so otherwise I can do what you suggest - and 'stagger all the audio files' in sequence so they do not overlap on the timeline and then when I import the flattened exported AIFF file into Audition/ Premeire / I then can cut it up again and recreate the overlaps. Was hoping there might be a simple copy + paste method or other 'export method' but I guess this is simply not possible. It would save me about 7 hours of work, but not the end of the world I guess
One final point - some of the audio clips are .mp3s but the majority are WAVS, hopefully this should not create any issues on the export.
thanks again for your help, if you or anyone has any other solution pls let me know
Best
Alex

TIMECODE Mismatch Premiere and Audition

Similar Messages

Maybe you are looking for