Timecode video effect issue in Premiere Pro CS6?

Appears to be similar in description to the issue folks were having back in 5.5. Here's the details...
• New install, making the jump from FCP, first open of this PPCS6 install.
• Source footage brought in as DVCproHD 720p @ 60 fps. Imported into new bin and then onto timeline in sequence 1... works beautifully.
• New transparent video clip on track above footage, stretched to full production length. Applied video effect > timecode to transparent clip.
• I see the positioning crosshairs and darkened translucent box and the field indicator... but no rolling numbers, even after rendering.
Just need to make a TC burn of the footage and I've spent half a day trying to get the burn to work.
Any ideas?

Peter,
Thanks for your response, however, no avail, same issue. However, I think I may have found what this issue's root cause is... being a designer, I've far too many fonts installed (managed via Linotypes manager) with a conflict here and there, and I've had to use my customer's "helvetica" and other fonts on occasion. I activated a new account on my computer (nice and clean fonts & settings) fired up the same document in Premiere and BOOM rolling timecode appears. So with that solution in hand, my thought is somewhere I've damaged/lost the font in my base account that Premiere uses to generate timecode. I wish it was a setting I could change in the timecode video effect to choose what font is used... maybe you could pass that on to product development? Or do you know specifically what font it uses for the TC video effect?
Anyway, thanks for your reply... now I'm off to go see if I can fix the font issue in my base user account.
clint

Similar Messages

Video Playback Issue in Premiere Pro CS6

I am editing a video with 2 video tracks on top of each other. When I scrub through the timeline or jusy hit play in the timeline the top layer of video scales to about 50% and plays on top of the layer below it. But it didn't do that 2 days ago. Any ideas on what could cause that? I have attached a screen capture of what it looks like while playing back. Any info would be greatly appreciated.
::Premiere Pro CS6 (v 6.0.5) and a Macbook Pro running OSX 10.9 on a SSD, and 8GB RAM::

They are both 1280x720 but they were shot on 2 different cameras. The thing that is killing me is that I have done this exact same camera setup and editing before without this issue. And it only scales the top layer video down while scrubbing or playing back (spacebar). When the playhead is still it pops back to normal.

Kindly explain the exact configuration of Video Editing Suite: Adobe premiere pro CS6.1, its price in India and if it is also equipped to edit photographs

Kindly explain the exact configuration of Video Editing Suite: Adobe premiere pro CS6.1, its price in India and if it is also equipped to edit photographs too.

This is a user to user forum. We are not Adobe. For pricing information, you need to contact Adobe Sales in India.
Premiere Pro is just for editing video. Photoshop or Photoshop Elements is for editing photographs.

How to obtain Video and Non Video Serial Keys for Premiere Pro CS6

Discovered that certain codec presets (specifically the AVCHD codec) was not available for Premiere Pro CS6 installed under Creative Cloud for Enterprise.
Understand there are two different serial numbers for use in installation. One of these serial numbers is labeled "Video," and one is labeled "Non-Video.
Where are these serial numbers located? How are the serial numbers obtained?

Hello Ann,
Appreciate your reply..
Here is where some additional confusion arises (reference bottom part referring to Video Serial Keys) Adobe support said that these Video Keys are to be purchased from the reseller (which makes no sense)
Error "...a sequence that could not be opened"
So, if I understand from your replies and what I have read - it is of the belief that by de-activating and re-activating will address the issue of the missing codecs. Do you believe this to be correct as well?
Thank you

Working with video and photos in Premiere Pro CS6

Hi Folks.
I am a LONG TIME Adobe Premiere 5 user. NOT CS5, Adobe Premeire 5!! Yes, from the 1990's!! Recently I went back to college and taking advantage of the educational store, I treated myself to Adobe Master Collection CS6. I LOVE IT!!!
I'm just back from holidays where I snapped loads of photos at 14Mpx and video at 720p HiDef on my camera. I now want to compile a holiday video of my photos and videos telling the story of my holiday. I always do this and in Adobe Premeire 5 I had it nailed down. This is my first big outing with Adobe Premiere Pro CS6 and while I'm making some good headway with it, there are so many differences that I have a few questions...
1.
My movie is being made at the resolution of my video footage, 1280 x 720. My photos are MUCH bigger then this. When I place a photo on the timeline, because it's much bigger then the video resolution I have to right click on it on the timeline and select Scale To Fit Screen or whatever the option is. This works great as the whole photo then shrinks down to fit within the video resolution. But it's a pain as I have LOADS of photos!! Is there a way to make photos default to fitting on the video resolution when I place them on the timeline? I don't want to resize them in Photoshop to fit the resolution as I plan to move and zoom into the photos as part of the video so I want to keep them at their 14Mpx size.
2.
When I place a photo and a video side by side in the timeline, why can't I place a Cross Disolve transition overlapping the two of them? The transition just overlaps the video start/end depending on where it is. If I put two photos side by side, the transition will overlap the top of them on the timeline. Haven't tried it with two videos yet.
That's it for now. Making slow but good headway. Any feedback would be appreciated.
Paul.

Start by downrezzing your photos in PS to a more manageable size. If you don't need pan and scan, just use 1280x720. You can batch resize them in PS and it will make the editing experience a lot better, putting less overhead on the system and resulting in a much snappier response.
Read about handles in the Help file for transitions. You need extra material at the end on a clip and the beginning of the next clip.

MXF issues with Premiere Pro CS6

Hello,
I am having trouble using Canon XF300 MXF files in Premiere Pro CS6 v6.0.2. I am using the media browser (tried icon and list view) to import footage (first importing to internal HD via the Canon XF Utility). I can import and play audio and video for all files under 2.05 GB but PPro limits any file longer than 30 seconds to 30 seconds.
Alos, Canon cameras cut files over 2.05 GB into separate MXFs. Most of my footage are interviews over 10 minutes long so I have 3 or 4 separate MXF spanned files for each clip. Premiere is having most trouble handling these files. First of all it limits them to 30 seconds each. Then, when I import them and drag them into a sequence it will only play audio from the first spanned file, even if video from the second sapnned file is playing.
I have tried merging all spanned files using Canon XF Utility's 'Export to MXF' function. As a result I have one 10 minute long MXF file but when I import it to PPro it still limits it to 30 seconds.
I made the change to PPro because of the ability to edit various formats in a single senqunce without tanscoding. I recently purchased a Sony FS700 and FCP7 couldn't really handle the MTS (or clipwrapped movs). Premiere handles them perfectly but can't handle the MXFs. So currently I am finding myself going into FCP7, logging and transfering the MXFs and transcoding them to .movs using the Canon XF plugin for FCP7 and then importing those to Premiere (they work fine this way)...but of course its a hassle to do with hundreds of clips per shoot.
I also noted that VLC 2.0.x versions can't handle the MXFs so well (video plays fine, audio at double the speed) but VLC version 1.0.3 handles them ok as long as I dont forward the video.
Any help is greatly appreciated.
Computer specs: Mac Pro 2.66GHz 12 core, 16 GB RAM running latest Snow Leopard update.
Clips shot at: 29.97 fps, 50 Mpbs, HD 1920x1080.

(first importing to internal HD via the Canon XF Utility)
Try skipping any special software and just use Windows Explorer (or Finder).

Crashing issues with Premiere pro Cs6

When I use Premiere Pro CS6 it tends to crash and it also tends tends to make the video pink and green looking, and it also sometimes flips it upside down and turns it black and white. So I was wondering if auto-saving had anything to do with it or if my camera or cpu had anything to do with it. I re-installed the program once, I also tried converting my video files to h264 before bringing them into Premiere. I use a Sony HXR MC1500p, and I am not using PAL by the way (or maybe I am and I am unaware), I really dont understand PAL and NTSC anyway.
Camera Specs:
http://www.bhphotovideo.com/c/product/759003-REG/Sony_HXR_MC1500E_HXR_MC1500E_Shoulder_Mou nt_PAL.html
CPU Specs:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3844129&CatId=1 14
Please Help me!
Thanks, Ryan

1st. You don't have convert you videofiles they are AVCHD so OK for Premiere Pro.
2nd. The edit PC (with Pro pro) is far better off with Intel CPU, Nvidia GPU, lots of harddiscs, >800 watt gold PSU, big CPU cooler etc etc..
3rd. Read a few hours at the hardware department. And you could build a nice machine for $1500,- to $3000,- yourself or order at ADK.
http://forums.adobe.com/community/premiere/hardware_forumhttp://

Audio sync drift issues within Premiere Pro CS6, even with 48kHz project & source material?

Evening guys and Merry Christmas to those who follow the tradition. I'm currently doing a few last minute tweaks to a live dance show that I recently shot. The show featured music that was recorded in camera (via additional mic) from the speaker setup within the theatre. This was always intended as a guide track as the original music would then be synced in the edit to give a cleaner sound to the audio during the dance sequences. I have the original CD that the music was played from on the night, however when the files are imported into Premiere Pro (or even Audition), they sync for the first 10 seconds or so and then gradually drift out of sync as the track goes on.
My project is set to 48.000 audio, which was what the original footage was shot at, as well as the audio tracks being imported as 48.000 too. Now on paper there should not be any issues with this sync drift occuring right? I've even tried with 44.100 audio files and naturally they drift out of sync.
At a loss here really as I'm not sure where i'm going wrong. Can anyone shed any light on this situation please?
Thanks!

What are you editing, and does your project match your video?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/
Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341

Lens Distortion effect missing in Premiere Pro CS6

Hi,
I recently purchased a Phantom VIsion 2 and the recorded material needs a bit of a fisheye removal and I read on several forums it's best to use the lens distortion effect found in Effects- Distort in Adobe but it's not in my list, other effects are. Is there something I need to do to get these effects? I tried reactivating the products but all works fine except for this feature..

In CS6 I think its Windows only.
If you have AE you can use the Optics Compensation
720p video:
Field of View: 83.0
Reverse Lens Distortion: CHECK
FOV Orientation: Horizontal
View Center 640.0, 360.0
Optimal Pixels: NOT CHECKED
Resize: OFF
For 1080p video:
Field of View: 63.0
Reverse Lens Distortion: CHECK
FOV Orientation: Horizontal
View Center 960.0, 540.0
Optimal Pixels: NOT CHECKED
Resize: OFF

Importing Videos Clips into Adobe Premiere Pro CS6

When I import video clips, they are not in the correct numerical order.

Do a Sort on the Bin Column

FAQ: What are the best resources for Premiere Pro CS6?

Here are high quality resources for troubleshooting and tutorials related to Premiere Pro CS6.
Premiere Pro CS6 troubleshooting articles
Issue: I'm having trouble downloading and installing Premiere Pro CS6. What do I do?Answer: See troubleshooting documents, post in the appropriate forum, or contact support.
More info: http://blogs.adobe.com/aftereffects/2013/09/troubleshooting-issues-with-downloading-and-in stalling-after-effects.html
Issue: What are the system requirements for Premiere Pro CS6?See this article: http://helpx.adobe.com/premiere-pro/system-requirements.html#Adobe%20Premiere%20Pro%20CS6% 20system%20requirements
Issue: Why won't Premiere Pro CS6 play back AVCHD media?Answer: Update to Premiere Pro CS6 (6.0.5). Previous versions of CS6 had this issue.
More info: http://blogs.adobe.com/premierepro/2013/08/premiere-pro-cs6-6-0-4-update.html
Issue: Does Premiere Pro CS6 work with OS X 10.9 (Mavericks)?Answer: Yes, make sure you update to Premiere Pro CS6 (6.0.5)
More info: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
Issue: Is there a trial available for Premiere Pro CS6?Answer: Yes, subscribe to the free version of Creative Cloud, then download the trial.
Issue: I'm having unexpected behavior in Premiere Pro CS6 and want to trash preferences. How do I do that?Answer: See this blog post: http://blogs.adobe.com/genesisproject/2011/02/premiere-pro-cs5-maintenance-two-great-tips. html#more-537
Issue: I'm getting errors related to QuickTime. What do I do?Answer: See this blog post for troubleshooting items related to QuickTime: http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
Premiere Pro CS6 tutorials
Issue: I'm new to Premiere Pro CS6. How do I get started?Answer: See this blog post: http://blogs.adobe.com/kevinmonahan/2011/05/20/getting-started-with-adobe-premiere-pro-cs4 -cs5-cs5-5/
Issue: I'm switching to Premiere Pro CS6 from Final Cut Pro 7. Are there any tips for me?Answer: See this article by Scott Simmons on Pro Video Coalition: http://provideocoalition.com/ssimmons/story/105_adobe_premiere_pro_cs6_questions_answered
Issue: I just switched to Premiere Pro CS6 from Final Cut Pro 7. Are there any missing features between the applications?Answer: See this article: http://provideocoalition.com/ssimmons/story/10_fcp_things_fcp_editors_might_be_missing_in_ adobe_premiere_pro_cs6
Issue: Are there any good, free Premiere Pro CS6 tutorials available?Answer: See these tutorials: http://library.creativecow.net/series/Premiere-Pro-Basics-CS6--above-with-Andrew-Devis
Issue: How do I optimize Premiere Pro CS6 for best performance?Answer: See this article: https://www.video2brain.com/en/courses/after-effects-premiere-pro-performance-workshop
Issue: How do I operate the multicam function in Premiere Pro CS6?See this article: http://provideocoalition.com/ssimmons/story/working_with_multicam_in_adobe_premiere_pro_cs 6

Hi ..
GO to website www.Apache.org
down load Apache tomcat server .
install it ...
Go to sun site
c and download jsp tutorials ...
Go to
(www.coreservlets.com)download book core servlets
u can find lots of nice books supported by sun on sunwebsite ...
Now u r equipped ....
start doing everything (R &D) on server ..
Join This JSP forum and ask any thing u didnt got ..or learn or get confused..
I thing once u go through this ..it will do all what u want
Hope it helps
Best of Luck :)
regds & take care

WARNING! - Multicam has MAJOR FLAW in Premiere Pro CS6!!!!!!

When you are using Premiere Pro CS6, and you are editing a multicam sequence and you hit PAUSE or STOP, Premiere CS6 makes a cut in your timeline and then changes shots back to the original shot whether you want it to or not!!! This forces users to go back and fix the un-intended cuts later which is a HUGE time waster. The thread below was started tracking the issue and then suddenly LOCKED by Adobe with a FALSE correct answer as the issue is NOT fixed! The answer is only an attempt at a workaround which DOES NOT work for everyone as pointed out in the thread and the thread should NOT have been locked as the MAJOR FLAW still persists and has persisted for years. Final Cut Pro, Avid, FCPX do NOT have this issue. Premiere Pro CS6 does.
This is the thread:
http://forums.adobe.com/thread/1069438?tstart=0
Premiere Pro CS6 is a nice editing program BUT it has a HUGE time-wasting flaw that makes editing multicam sequences VERY frustrating for many users and that still persists as of version 6.0.3. Please start by UNLOCKING a thread that is NOT resolved. The issue is NOT fixed and still persists as of October 2012. Marking something as the "correct answer" that does not work for everyone is unacceptible and only avoids the real issue that has been around for years as pointed out in the original thread started back in 2010. Please unlock the thread until the issue is resolved so the issue can be discussed constructively until its resolved!

Please don't double post. The content of the thread you referenced contains all the information that is needed to work around the issue. Thread locked. If you start additional topics for the same issue, they will be deleted.
Jeff

After Effects CS6 and Premiere Pro CS6 not available for installation for 32-bit systems

After Effects CS6 and Premiere Pro CS6 require a 64-bit operating system and processor to be installed and run.
If you subscribe to Creative Cloud but use a 32-bit computer system, you will not be able to download and install Premiere Pro CS6 or After Effects CS6.
This issue primarily affects users on the Windows operating system, since all supported versions of the Mac OSX operating system are able to run 64-bit applications.
See this document for details:
"64-bit Windows required for After Effects and Premiere Pro CS6"
In general, you can only download and use applications for which your computer system meets the minimum system requirements.
Premiere Pro system requirements
After Effects system requirements

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

Dynamic Link from After Effects CC to Premiere Pro CC Performance Issues

I just updated my After Effects and Premiere Pro to CC and since doing so I've found numerous performance issues. One that is seriously hurting my workflow is the poor performance of the dynamic link with After Effects compositions into Premiere Pro. In CS6, you could make a change to the AE composition, save it, click over to Premiere Pro and it would quickly update and you can play your timeline and preview your changes. You could also move the clips around and add cross dissolves and watch the changes quickly in Premiere Pro CS6. Now, since updating to CC, if you save the composition in AE and click over to Premiere Pro it won't update on its own. Sometimes it just shows a single frame of the AE composition. I found that if you right click and "Edit Original", go into AE and then click back over to Premiere Pro and it will finally update. But if you make any changes to the placement of the AE composition on the timeline, or add a cross dissolve, fade, etc. it again won't play the AE composition any longer. After you make any changes to the AE composition you have to right click and go to "Edit Original", go into AE, and then click back over to Premiere Pro.. Then it will finally update.
iMac
Quad Core 3.4GHz
32G RAM
OS X Mavericks

Thanks Kevin.
Unfortunately in my case the export doesn't solve the issue. The video only looks good while in the composition... I've tried exporting it in all the different formats with several codecs, but to no avail...
You can check my own post in the After Effects forum: AE linked composition looks different in Premiere

Premiere Pro cs6 - Workspace video pane remains blank when trying to view imported files

Hello,
I'm currently working in Adobe Premiere Pro CS6. When I import my media into my workspace and drag it onto the timeline, the preview box where you can review your cut video remains black. Double clicking on the imported file gives the same result. I was initially importing .jpg files (about 300kb size for each) so I tried importing various other image formats - .png, .tiff, etc... I have even imported a movie file into my scene to determine whether the issue was with my content format. With the video, the audio plays fine, but the video remains blank in the preview box. I have tried rendering my workspace and changing my initial project settings, but to no avail. I went into my preferences for Premiere and from what I can determine, everything looks fine.
I'm running the software on an HP Pavilion, Windows 7 intel i7, 8gb ram, with a nvidia 650M 2GB card. Any help would be greatly appreciated. Thanks!

Hi,
Have you tried to change your Video Renderer? It would be under Project > Project Settings > General. Switch the option to Mercury Playback Engine software only and see if it helps.
Thanks,
Rameez

Timecode video effect issue in Premiere Pro CS6?

Similar Messages

Maybe you are looking for