Timecode video sync with spanned clip problem for multicam edit

I wasn't being able to sync 3 camera angles from a recent shoot with 3 EX3's all synced using the clock on one camera as master and free run on the other two cameras as slaves. External link came up on the displays and the videos show in premiere to all have the correct embedded timecode.
Yet, the synchronize menu via timecode doesn't work.
I found that it must be a problem with spanned clips but I can't figure out how to get around this problem. I'm able to synchronize these clips in final cut pro 6.0.6 but not in premiere cs 5.5 or cs 4.2.
Anybody ever have this problem or any suggestions?

Hi Jonathan,
It's not always so easy to do NTSC <-> PAL conversions, and it's impossible to do them in Premiere while maintaining any degree of quality.
You can do a good job of this with AviSynth (freeware) but the learning curve may be a bit steep for a newbie. I also hear that ProCoder ($500+) does a good job of this but I've never tried it.
As for the sync, you can chop up your PAL clip within the muticam sequence (leaving some "holes") and match up particular points manually. You'll obviously have to edit around the holes.

Similar Messages

HT1386 After syncing with itunes(windows), messages for one of the contact(I have saved the contact name as 'Unknown') are lost. I can see only few messages which fits to the screen. I don't see option to load earlier messages.

After syncing with itunes(windows), messages for one of the contact(I have saved the contact name as 'Unknown') are lost. I can see only few messages which fits to the screen. I don't see option to load earlier messages.
Can anyone help.

Can anyone help on this?

HT1296 Just updated to iphone 5 and cant Sync with Mac. Asking for OS 10.6 and cant find it. Current Mac OS X Version is 10.5.8. Is there any more downloads I need to do in order to sync new iphone 5? Thanks

Just updated to iphone 5 and cant Sync with Mac. Asking for OS 10.6 and cant find it. Current Mac OS X Version is 10.5.8. Is there any more downloads I need to do in order to sync new iphone 5? Thanks

http://www.apple.com/iphone/specs.html
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.itunes.com/download)
Also included on the retail sales box.

How can I keep the edited video which in project into Libray for re-edit ?

How can I keep the edited video which in project into Libray for re-edit later ??
As i used i movie 06 before....
after i imported the videos in to the library, then i can drag the videos to the timeline(now is project)
then edit it.
After that i can just drag all the timeline clips which is edited to the library.So I can keep it for next time if i wanna re-edit.
But Now if did all the editing at the library clips then drag to project, i can not drag the project clips back to library, so how can i keep it for my editing safty?
I do not wanna to edit again the same clips from the library!!! as i need to edit many different short clips together then export to individual videos, and i may need to re-edit.
or i can keep the edited video in project, then i can selected the clips which i willing to export, the rest video who in the project will not be export at the same video? I m wondering....
please help!!! Urgent!!

Just keep the project. Then you can just duplicate the project and make the next set of changes as needed. By duplicating the project, you are not duplicating the event, just the links to the event library.
This way you are not eating up disk space.
Does that help?

Canon spanned clips - problem with Premiere CC 2014 v 8.1 (and NOT in CC v 7.2.2)

Hello,
I have a spanned XF100 clip (3 clips total 13:50).
I have the whole directory content (XML,...) of the CF card.
I use the Media Browser of Adobe Premiere to import the videostreams.
Everything worked fine with Premiere CC v 7.2.2
I needed to upgrade to Premiere CC 2014 v 8.2 as the new Speedgrade didnt work with the old version of Premiere.
Suddenly the spanned clip does not playback smoothly. In fact, if I place the timer to a specific point, it takes up to 60 sec until the picture changes in the "Programm window" and doesnt playback at all. Only the sounds works, but the video is only a still picture.
This only happens with the spanned clip. All the other "single" clips are working fine.
I do exactly the same thing in CC and CC2014. In CC it works perfectly and in CC2014 it does not.
Any idea?
Does CC2014 interpret the spanned clips differently?
thanks for your help!
Manfred

I have a similar issue with XF305 spanned clips in a sequence mixed with 5dMarkIII and old SD DV footage running very slowly intermittently on 8.1. I had worked case 186016889 this weekend for this issue and the engineer renamed the following folders to _old and PR recreated them. I'm running on Win 7 Pro latest SP, i7 920, 48 GB RAM and Nvidia GTX 480.
%appdata%\Adobe\Premiere Pro to %appdata%\Adobe\Premiere Pro
Libraries\Documents\Adobe to Libraries\Documents\Adobe
This seemed to help for a while, but the nature of the slowdown has been from a few minutes to many hours. I did finally notice that I had up to three orphaned PR processes that were still doing I/O. Things get better now for a while after I kill the processes. I've seen other issues with the new version where edit audio in Audition doesn't refresh the waveform after an Audition save and removed and reinstalled PR last night because the edit audition of the next clip overwrote that audio with the previous clips file.
So I have a fresh/clean install and it's still intermittently leaving orphaned processes and running slow. I think I can get it to happen consistently when I send the audio to Audition, but I'm doing an export now so I can go back to the previous version. I'll do a quick test to see if it's consistent before I downgrade so I can re-due the last three days work.

Audio/video sync with h.264 - players affected

Hi there,
I've been trying to do a sound mix in Audition CC and have been sent a video reference (h.264/AAC). I noticed the audio going out of sync with the video and so checked the file in a few players (PotPlayer, VLC, Quicktime). I found video was also lagging behind the audio with all these players so I was about to contact the person who sent me the clip but decided to do one more test. Weirdly, in Window Media Player the video stays in sync all the way through!
I understand this means that my problem's more to do with my system than Audition, but I find this problem occurs sometimes in Premiere with other source clips too and instead of tweaking it to work temporarily as usual I really want to get to the bottom of it.
I tried using AME to encode to different codecs and have tried uncompressed video and audio. This makes no difference, and I imagine that's because all my Adobe software is using a dodgy codec to read the video, could this be the case?
Has anyone else had an issue like this? And why is Windows Media Player suddenly the only thing immune to this problem?
Here's the mediainfo for the clip in question, thanks for any help!
Format                                   : MPEG-4
Format profile                           : QuickTime
Codec ID                                 : qt
File size                                : 144 MiB
Duration                                 : 24mn 38s
Overall bit rate                         : 817 Kbps
Encoded date                             : UTC 2014-01-22 15:04:01
Tagged date                              : UTC 2014-01-23 19:33:59
Writing library                          : Apple QuickTime
©TSC                                     : 2500
©TSZ                                     : 100
Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : No
Format settings, ReFrames                : 2 frames
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 24mn 38s
Bit rate                                 : 683 Kbps
Width                                    : 854 pixels
Height                                   : 480 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Constant
Frame rate                               : 25.000 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.067
Stream size                              : 120 MiB (84%)
Language                                 : English
Encoded date                             : UTC 2014-01-22 15:04:00
Tagged date                              : UTC 2014-01-22 15:04:06
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
Audio
ID                                       : 2
Format                                   : AAC
Format/Info                              : Advanced Audio Codec
Format profile                           : LC
Codec ID                                 : 40
Duration                                 : 24mn 38s
Bit rate mode                            : Constant
Bit rate                                 : 128 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 48.0 KHz
Compression mode                         : Lossy
Stream size                              : 21.7 MiB (15%)
Language                                 : English
Encoded date                             : UTC 2014-01-22 15:04:00
Tagged date                              : UTC 2014-01-22 15:04:06
Other
ID                                       : 3
Type                                     : Time code
Format                                   : QuickTime TC
Duration                                 : 24mn 38s
Time code of first frame                 : 00:00:00:00
Time code settings                       : Striped
Language                                 : English
Encoded date                             : UTC 2014-01-22 15:04:00
Tagged date                              : UTC 2014-01-22 15:04:06

Hi,
When encoding live in H264 with the FP 11 then playing it live on another client (through FMS r) the video sometimes (1/3 of times) has major skips or jerks. It's almost as if the video goes back to some older keyframes and then returns to live. Same experience with non-h264 produces smooth video.
If the server (FMS ) records the video, the replay looks smooth, which is strange because I would have assumed the FP was not encoding well with H264.
Has anyone had this issue? please reply
Thank you.

Video formats with diadem clip

Hello every one,
We just started few days ago with Insight software and we are experimenting next troubles:
When we put our avi files in Insight in the player mode our video do not show all the frames, only first 10% after this the video stop and not upgrade the image. (our avi file is longer than example file used to check all was running).
We can solve this problem using a more ratio of compression for avi files using Intel IndeoR video 5. Playing with Insight it works ok but when we try to open the CIP file with the CLIP-player the Indeo avi files do not load, the error is: "Could not be added to the AVI control!".
Which compression codecs accept the player??
Why the player do not accept formats accepted by the Insight full version??
Thanks

hello Luis Martínez,
i assume you are using windows XP with SP2.
- With SP2 avi's using the indeo codec don't play from the temp-path.
- The player extract the avi into the temp-path and try to play from there.
-> So the player don't work with the indeo-codec.
With Insight 2.08 all example avis are converted to the Cinepak Codec by Radius. The file are a little bigger but work with Windows XP.
regards,
- Sven

Version number for GPO's not in sync with the version number for GPO's on the Baseline domain controller

Hi
I accidentally removed one of our domain controller's hyper-v image (DC-02) from the hyper-v manager and to bring it back online launched a new virtual machine using the same virtual hard drive. This brought back the domain controller machine and I set the
original IP address to the same assuming that everything would just working fine.
Sadly, that wasn't the case as when I tried to open the group policy manager on that machine I started getting "Access is denied" error. I was then presented with an option to open the group policy manager with the first available DC which I did
and was able to open it with showing the same machine as the baseline domain controller under the status tab (DC-01 is actually the baseline DC). I then clicked Detect now and noticed it was showing 1 DC under replication in progress with problems in GPO version.
I then did the same thing on the primary DC (DC-01) and even there it was showing this only (images attached).
So I started exploring over the internet going through various articles but couldn't find a solution which I could apply without worrying about corrupting something somewhere. I also went to the SYSVOL folder on both the DC's to check the version number
in GPT.ini files which are mentioned below:
\\CC-DC01\sysvol\cloudchowk.lab\Policies\{6AC1786C-016F-11D2-945F-00C04fB984F9}
[General]
Version=3
\\CC-DC01\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}
[General]
Version=5439513
\\cc-dc02\SYSVOL\cloudchowk.lab\Policies\{6AC1786C-016F-11D2-945F-00C04fB984F9}
[General]
Version=3
\\cc-dc02\SYSVOL\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}
[General]
Version=5308439
Could anyone please help me sort this out? I am no system admin and whatever knowledge I have of setting up DC, AD etc is from following one article or the other over the internet.
Regards
Sajat Jain

Hi
Apologies for responding late. I followed through all the points mentioned by Frank and even did a non-authoritative restore synchronization but still no luck.
I am attaching the output from the dcdiag /q and the from the event viewer after doing to non-authoritative restore synchronization.
DCDIAG /Q
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... CC-DC03 failed test DFSREvent
Unable to connect to the NETLOGON share! (\\CC-DC03\netlogon)
[CC-DC03] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... CC-DC03 failed test NetLogons
An error event occurred. EventID: 0x0000164A
Time Generated: 01/18/2015 17:52:17
Event String:
The Netlogon service could not create server share C:\Windows\SYSVOL\sysvol\cloudchowk.lab\SCRIPTS. The following error occurred:
An error event occurred. EventID: 0x0000164A
Time Generated: 01/18/2015 17:54:12
Event String:
The Netlogon service could not create server share C:\Windows\SYSVOL\sysvol\cloudchowk.lab\SCRIPTS. The following error occurred:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 17:54:41
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 17:55:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 17:59:41
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:04:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x0000164A
Time Generated: 01/18/2015 18:05:10
Event String:
The Netlogon service could not create server share C:\Windows\SYSVOL\sysvol\cloudchowk.lab\SCRIPTS. The following error occurred:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:09:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:14:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:19:43
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:24:43
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
......................... CC-DC03 failed test SystemLog
EVENT VIEWER LOGS
The DFS Replication service initialized SYSVOL at local path C:\Windows\SYSVOL\domain and is waiting to perform initial replication. The replicated folder will remain in the initial synchronization state until it has replicated with its partner CC-DC01.cloudchowk.lab. If the server was in the process of being promoted to a domain controller, the domain controller will not advertize and function as a domain controller until this issue is resolved. This can occur if the specified partner is also in the initial synchronization state, or if sharing violations are encountered on this server or the synchronization partner. If this event occurred during the migration of SYSVOL from File Replication service (FRS) to DFS Replication, changes will not replicate out until this issue is resolved. This can cause the SYSVOL folder on this server to become out of sync with other domain controllers.
Additional Information:
Replicated Folder Name: SYSVOL Share
Replicated Folder ID: 4689406D-D6D8-49E0-8079-2B1D4AE61BC6
Replication Group Name: Domain System Volume
Replication Group ID: 6B162096-2EFA-4D4C-BF13-62CC5B112B97
Member ID: 566943F9-D2FB-4304-823D-10DC972F831A
Read-Only: 0
Should I just start over again by removing DC03 and setting up another DC?
Regards
Sajat Jain

Photos & videos synced with icloud on my pc are always inverted

I have an iphone 4s and the photos i click on my phone are synced with my windows 7 pc properly only thing is that the photos appear inverted in the photo stream folder on my pc. I always hav to correct them and before editing them.
also the videos shot in my iphone when copied to my windows 7 pc and when played appear inverted by 180 degree .
These videos if played on quict times only appear alright but if played on other players they are inverted completely.
It is not always easy to take a pic or a video holding the phone uside down or inverted with the clickin button at bottom wen phone is placed in a landscape mode.

Go to www.icloud.com and see if they are there.
And stop with the double sync, either use iCloud or iTunes (which is not iCloud) you will have problems if you use both.

Help with merged clip decision for a short film

Greetings and thanks in advance for any perspective you can offer.
I've begun to edit a short film (10 minutes) that has 3 hours of dailies. The clips are all merged clips, created with dual system audio and synced with Plural Eyes 3.
However, before setting to what's sure to be months of work, I wonder if there was a better workflow. Bear with me. To begin with, marker comments do not stick with merged clips. As soon as you select another clip - poof! They're gone. And there are other limitations that may or may not affect me down the road. I guess I'm saying I'm not completely sure what I might want or need to do at some point, but I'm concerned that I'll be limited for using merged clips.
I've realized I can use Plural Eyes to merge my clips and audio fully outside of Premiere CC. Those clips, once imported, retain marker comments and suffer no other "unique" limitations.
It will be a massive undertaking to resync, re-import, and retag and organize everything - but perhaps in the long haul this is prudent? Or not?
I'm cutting with Prores 422 at full size 4K, so replacing media isn't a concern. Anything else I should be worried about? There's always a chance I'll use a 3rd party to color-correct with a DaVinci.
Thanks again.

I shoot for about -6dB, with no peaks above 0dB.
Sounds like you have a very weak signal. I'd set away from PrPro and handle this in SB, or Audition. Listen carefully with a good pair of noise-canceling headphones first, and then test on monitors.
Are you working in mono, stereo or 5.1 SS?
Good luck,
Hunt

Address Book sync with Google Contacts problem

After creating a Google Apps account for my new domain, I've configured my Address Book application on my Mac-book Air to sync with Google. I created a contact on the Mac-Book and after a sync I saw it in Google's web client. I created a contact on Google's web client and after a sync it appeared in in Address Book.
After two weeks, the sync stopped working. I didn't changed nothing on the computer. Suddenly I noticed that the contacts sync doesn't work anymore.
iCal and Mail are still working great. the problem is only with Address Book.
I searched Google Help. I reset the Sync Services, soft and hard, still not working. I'm not using iCloud or any other sync.
Do you have any idea?

can anyone answer this?
at some point, I remember being able to do this. 10.5.x maybe? With 10.6 . . . .
I do recall, however, that I stopped doing it because the sync went haywire. I did it the other way around: I have all my contacts in Address Book, so I exported them and uploaded the vCards to Gmail, after deleting all Gmail contacts. That's not such a great option. Surely this is well-automated by now?

E71 BUG - Contacts sync with MfE: Notes simple for...

I have set up notes per contacts in Outlook. When I synced these via Mail for Exchange, they have lost their linebreaks and become unreadable on the E71. This is even though they are still available and correct in Outlook.
Mighty bad for a business phone.
Heinzharald
E71-1: RM-346, 100.07.76, 08-06-2008
NPowerProfiler: 0.03-0.05W
since: 18.08.2008

Quick update:
I installed the latest trial version of Roadsync for Symbian S60 3rd edition and contacts sync. works perfectly both ways with the Zimbra server for creation and deletion of contacts. E-mails and calendars are OK.
It even syncs the tasks created on the phone to the server, something that MfE had never been able to do. It won't syncs tasks created on the server to the phone, though.
So, it's definitely an MfE problem...
But at 49 €, it's kind of a pain in my rear end to pay for something I was supposed to have built-in the phone...
Please MfE Team, heed my call...

MS Exchange calendar no longer syncs with new software upgrade for LG Lucid

Recently downloaded new software for LG Lucid.
Seemed to go well. Mail, OK. Contacts, OK.
Google calendar syncs.
Calendar, won't sync with Outlook. It used to before the upgrade.
Sync buttons are checked in 'accounts'.
Anyone else having this issue?

Hi jimmydiplacido!
Its a bummer that the Exchange no longer works since the OS update. Can you elaborate on what happens when you try to establish a connection? Have you tried removing and readding the exchange account? Please keep me posted if this continues.
Thanks,
AdamE_VZW
Follow us on Twitter @VZWSupport

No Sync with Imac and Outlook for mac 2011

Hello,
just bought a new bb torch, but it does not synchronise with outloop (office for mac 2011).
no contacts, no agenda.
I can not choose which agenda/contacts.
It looks like the Torch goes to the standard email progam of Imac and not to Outlook.
The only contacts are the standard contacts from addressbook imac.
thanks in advance,
rob

I have just discovered the same thing - if you do a search around the topic you will find it confirmed that the only thing that will sync with Outlook for Mac is contacts.
I've just moved everything over from a PC to a Mac and so to find it not working is so frustrating.
SORT IT OUT RIM - or at least assure us you're working on it.

Video Syncs with Ipod Classic but not with Touch

A video podcast in iTunes will not sync with my new Touch but does with my Classic. Any ideas?

Not enough free space maybe.

Timecode video sync with spanned clip problem for multicam edit

Similar Messages

Maybe you are looking for