Timed objects not appearing, selectively

Hello-
I have created and saved a software simulation with 18 slides, each with multiple elements added to it. I have set each element to appear at varying intervals on each of the slides. When I select the blue play arrow, from the bottom of the timeline view shown below, the slide, and its elements, perform perfectly. I save and publish the project (with Export PDF checked), open the PDF I find that elements on 4 of the 18 slides do not perform as set in their timeline.
In the example shown below:
The Serial Number...does not appear at all
Typing Text...types the first two numbers and stops (I have increased the time and have the same result)
What am I missing here?
Oh, and I'm a total newb here, on many levels...
Thanks in advance, cbarone118

You have four buttons, pausing at 1.5secs. If none of those shape buttons is clicked, the text with the SN will never appear since it is timed at 2secs. And typing text will stop at the same pause.
Change the pausing point to later for all shape buttons in the Timing panel, or drag the pausing line in the timeline.

Similar Messages

Timed objects not appearing

Captivate 7 (Windows 8) - I have added a number of images and smart shapes to slides and changed the timing so that they appear at different places in the slide. Some have limited duration and some last till the end of the slide. Everything works fine when I preview the slide (F3). However, when I preview any other way (5 slides, from this slide, project, in browser) or publish, then those objects do not appear on the slide.
I am able to add highlight boxes OK and change the timing, but not smart shapes or images. If the timing is anything other than the full duration, then they do not appear.
I have checked the objects to ensure they are visible, I have cleared my Captivate Cache, I have duplicated the affected slides.
Any ideas?

What Vikram is hinting at I believe is that your image button is pausing the slide before your other objects appear.
F3 is not a publish preview. It just plays the timeline in Edit mode but interactive objects do not pause the timeline in that mode. When you actually publish for real, at run-time these objects will pause the timeline, which is probably causing you to not see objects that would be added to the screen AFTER the image button's pause point.

Objects not appearing in build list

Thanks for reading...
I recently downloaded Keynote 3.0 and successfully converted a MS Powerpoint file to Keynote. However, some of the objects are not appearing on my build list. Furthermore, when I try to edit the slide with "new" text, etc they still are not on the build list.
I have tried Web searches and downloaded the manual without resolution of the problem. Any help would be greatly appreciated.
G5 & iBook (G4) Mac OS X (10.4.5)

Joeldn,
welcome to Apple Discussions.
I think it's difficult to help you withoutaccess to your particular file. If you could send me the Powerpoint, I would convert it and try to see what happens.
If it's okay with you, send the file to mre3 (at) mac (dot) com.

BI authorization objects not appearing in RAR, error while generating role

Hi
I am facing certain problems relating to integration of BI module version 7 with GRC Access Controls version 5.3 and support package 06. I am describing the problems in details below:
(a) In Risk Analysis and Remediation (RAR) component, I am creating Functions and
      Risks for Business Intelligence (BI) module. For that I have downloaded the
      descriptive text and authorization object data from BI development system and
      uploaded the same in RAR. Then I have created 2 Function Ids DBI1 (having action
      RSA1) and DBI2 (having actions RSA11, RSA12, RSA13, RSA14, RSA15) and 1
      Risk Id for BI (having Function Ids DBI1 and DBI2) in RAR. But when I checked
      the permission tabs of the Function Ids DBI1 and DBI2, I could not find any
      authorization objects for the actions in them.
(b) In Enterprise Role Management (ERM), when I am trying to create a Role TEST-BI
       in DBI 100 and I put the BI transaction codes in authorization data , I get the
       authorization objects . Risk analysis is also being done successfully. But at the time
       of Role generation in background mode , it is giving an error message :
       Error generating role TEST-BI for system DBI 100: Unable to interpret * as a number.
       I am thus unable to generate any role in DBI 100.
(c) In Compliance User Provisioning (CUP), I have imported a standard role from DBI
      100. Then I have added Functional Area, Business Process, Subprocess and
      Criticality Level to this role in CUP. But when I try to assign this Role to an user, it
       gives an error Error creating request. But requests are getting created and roles are
       being assigned to users in ECC development systems using the same Initiator, CAD, stage
       and path.
Can anyone please help me ?

-

New objects not appearing in Integration Directory

Created two new Message Interfaces and they aren't appearing in the Integration Directory when I create my Interface Determination. I copied an Interface that was appearing and the copy isn't showing either.
I've checked the change lists in both systems and nothing is left to activate. I just wanted some suggestions as to what else I should check.
Many thanks in advance.

Thanks I performed a cache refresh using SXI_CACHE and there aren't any changes are waiting to be activated.
With regards to the selection you can't delete the 'query' and select all. The select interface dialog just has a list of the interfaces available and an OK or CANCEL box.
What is also interesting is that two interfaces that were deleted earlier today are showing in the list.

Why do objects not appear in safari on iPad

On some websites only one object displays, where others should be there is just a blank space. Not sure if this is a JavaScript or flash plugin problem.

HellO;
There is no flash player for iOS.
Barry

Interface objects not appearing

Hi,
When I tried to open interface objects in integration repository.It asked for password.After giving password I got prompt that server connection established successfully.
But I can't see any interface objects or mapping objects.
Kindly help
Regards,
Ruby

Hi,
sometimes it happens so. Use the Refresh button on hte
Top Left corner to refresh the Objects.
Even if that dosen't work. Close the IB and open it again...
Cheers,
Siva Maranani.

Timed Objects do not appear, part 2

I am having an issue with getting timed objects to appear and was asked to post a screen shot of the set up. I apologize, but I am unable to post a screen shot here. I can take the screen shot and post elsewhere, just not here.
Here is the setup as best I can describe it.
There is one slide out of 19 that does not work correctly. It is a new addition to the slide deck and is intended to introduce viewers to the layout of an upcoming quiz.
It has a title and text area. There are three buttons that mimic quiz selection buttons. These three buttons are viewable throughout the full duration of the slide and work properly.
As the audio flows, Objects in the form of arrows are timed to appear to direct the viewers attention to the proper button. These do not appear at all. This is the reason I am writing.
The structure of the time line, from bottom to top is: Audio, Slide, the three buttons, then the arrows. I believe this layering is correct. The properties is set so they are viewable in the output.
Again, I apologize for not being able to paste in a screen shot.
Thank you for your time and suggestions.
Bill

I have attached the two screen shots. The first is a partial time line and the other
is the full slide.
They are copy pasted into a word doc, which I was able to attach.
I hope this gives some insight.
Regards,
Bill
Lilybiri <[email protected]> wrote:
Lilybiri created the discussion
"Timed Objects do not appear, part 2"
To view the discussion, visit: https://forums.adobe.com/message/7259846#7259846
>

Graphical Glitches: Objects appear not selected when they are, Symbols not appearing correctly

I've been having a ton of graphical glitches with Adobe Flash CS6 and I can't for the life of me figure out for the life of me.
Things that happen:
Objects will not appear selected when using the Free Transform Tool.
Symbols don't appar in scene when pasted, or dragged in until I leave the scene or symbol im in. They show up in the preview window though.
Something else I've been noticing is that when I use the Pen tool my computer or speakers or something making this werid noise and it only happens when I'm using the Pen tool.
Any help would be greatly appreciated.

No one has had these issues? I just got another one. My timeline disappeared, I don't mean the menu hid or thats it not there. It's there its just not actually displaying the Timeline or at least it didn't till I wen't back a few changes for some reason. It was still there though as I could click the eye and lock and the layers (which ones I have no idea) it was all grey. Also again the selection area doesn't show up, all movements of symbols are slow to update their postitions and when I turn on outlines it does nothing.
Also everytime I close Flash I get an error from windows, no idea why.

GP, callable object Web Dynpro Application (bespoke) not appearing in list

Hey y'all
We're developing our first GP, and we would like to call an existing bespoke Web Dynpro. When creating the callable object, we're selecting type Web Dynpro Application, but our Web Dynpro screen is not appearing in the drop down list on the next page. We think that this is because the application has been deployed to a different server (i.e. it has not been deployed onto the portal server).
So the question is, has anyone faced this problem before, and is there a solution?
Kind regards
Jon

Hi John,
Please have a look at this Exception on creating GP Action
This will solve your issue definitively. Do not take care of a given SDA, just redeploy everything and make sure that everything is overwritten by selecting the right option.
Best regards,
David

Alv is not appearing in the same Selection Screen

Hi people..
First time using cl_gui_docking_container.
I have a problem, my alv is not appearing in the same Selection Screen.
is there somethign wrong with my code? it doesnt even show a dump or catch.
Regards
DATA: lo_dock TYPE REF TO cl_gui_docking_container,
       lo_cont TYPE REF TO cl_gui_container.
DATA: gr_table      type ref to cl_salv_table,
       gr_functions type ref to cl_salv_functions,
       gr_display    type ref to cl_salv_display_settings,
       gr_columns    type ref to cl_salv_columns_table,
       gr_column     type ref to cl_salv_column_table,
       gr_sorts      type ref to cl_salv_sorts,
       gr_agg        type ref to cl_salv_aggregations,
       gr_filter     type ref to cl_salv_filters,
       gr_layout     type ref to cl_salv_layout,
       color         type lvc_s_colo,
       key           type salv_s_layout_key.
   SELECT * INTO TABLE tbl_datos_items FROM zsd_micros_bd.
CHECK lo_dock IS INITIAL.
CREATE OBJECT lo_dock
       EXPORTING
         repid = sy-cprog
         dynnr = sy-dynnr
         ratio = 70
         side = cl_gui_docking_container=>dock_at_bottom
         name = 'DOCK_CONT'.
     IF sy-subrc <> 0.
       MESSAGE 'Error in the Docking control' TYPE 'S'.
     ENDIF.
TRY.
lo_cont ?= lo_dock.
cl_salv_table=>factory(
exporting r_container      = lo_cont
             container_name = 'DOCK_CONT'
             list_display   = if_salv_c_bool_sap=>false
importing r_salv_table = gr_table
changing t_table = tbl_datos_items ).
CATCH cx_salv_msg .
ENDTRY.
gr_functions = gr_table->get_functions( ).
gr_functions->set_all( abap_true ).
gr_display = gr_table->get_display_settings( ).
gr_display->set_striped_pattern( cl_salv_display_settings=>true ).
gr_display->set_list_header( 'Items de Ventas' ).
gr_table->display( )

Hi ,
First you have to create you own screen ( dynpro ) with a screen number ( 0101 for exemple ) , you need to pu a custom control in it , name the custom control ( lo_cont )
For the screen created you need to create a module for the PBO , in this module you sould put you code for displaying the liste :
Module STATUS_0101 output.
TRY.
lo_cont ?= lo_dock.
cl_salv_table=>factory(
exporting r_container      = lo_cont
             container_name = 'DOCK_CONT'
             list_display   = if_salv_c_bool_sap=>false
importing r_salv_table = gr_table
changing t_table = tbl_datos_items ).
CATCH cx_salv_msg .
ENDTRY.
gr_functions = gr_table->get_functions( ).
gr_functions->set_all( abap_true ).
gr_display = gr_table->get_display_settings( ).
gr_display->set_striped_pattern( cl_salv_display_settings=>true ).
gr_display->set_list_header( 'Items de Ventas' ).
gr_table->display( ).
Endmodule.
and give the screen number when calling lo_dock
CREATE OBJECT lo_dock
       EXPORTING
         repid = sy-cprog
         dynnr = '0101'.
tested
Regards

Objects do not appear to deselect

We are having an odd behavior in Illustrator CS4 in our office. Multiple users try to deselect objects by clicking in blank space, but the last object still appears as if it is selected onscreen. When they select another object (without holding SHIFT), it looks as if the old object AND the new object are selected...but when they delete or otherwise manipulate the newly selected object, it only affects that particular object and does not alter the old object that appeared to also be selected. Although the actual functionality is correct, it is extremely distracting and annoying because it looks like they have more objects selected than they actually do...and they can never really tell what's what!
For one user, this happens frequently when selecting objects with clipping masks. For another, it happens when simply using the selection tool on any old object. All users on Mac Leopard 10.5.5. Aside from resetting preferences which I've had one of the users do (he's going to notify me if the behavior continues), any other ideas?

Been seeing this problem for years, since CS4, currently working in CS6.
It happens when you draw a selection box over an object containing a clipping mask and then try to deselect the object by drawing another selection box. That just selects an object inside the clipping mask, but you can't deselect that object by clicking off of it. You have to draw another selection box reselecting everything you just deselected, then click off of it. Or alternately, resize the offending object, hit Cmd+Z and THEN click off of it. I dunno whether this is a feature or bug, but anyhow it's a pain in packaging design where we use a lot of clipping masks.
I love how everyone who has never had this problem tells you to trash your preferences or quit other applications or reinstall something though, you guys are a great help!

Selection screen text not appearing in other than engllish language .

Hello All,
            On selction screen I have 3 select-option and 2 radio button for that I have the selection text maintain in 'Selection Text".
            When I login to system using French language then on selection screen only select options text is appearing in French language and Radio buttons text is not appearing in French language, it appearing in English language. In the program where I have maintain the selction text one column is there name as "Dictionary Object" which has the check box. In that, for select options check box is check in Dictionary object but for Radio button that check box is in disable mode.
             So how can Radio buttons text is appearing in French language when login through french language.

You've two options. One, log in in French and maintain the texts for the radio buttons directly. Two, use tx SE63 to maintain the texts for the radio buttons in French.
The select-options are automatically translated because their texts come from the data dictionary, and (as presumably they're SAP standard types), they're already translated as part of the French language pack. But the radio-buttons you have to do yourself.
matt

Smart object does not appear at specified time in slide.

Here's my issue: When I insert a speech bubble into the slide, set it to appear after 5.0 seconds and the display for the rest of the slide, it does not appear at the specified time. HOWEVER, if I move the speech bubble to appear at the very START of the slide, then it appears. I thought perhaps I needed to add an effect to make it work, so I selected the thought bubble, then added a "fly in" effect and set the time. It still won't appear at a specified time--only if I put it at the start of the slide.
Here's my question: Why won't the smart object (speech bubble) appear at a specified time, but it WILL appear if I set the "appear after" time to 0 seconds? I also have tried moving this on the timeline, and it still only shows at the start of the slide.
Many thanks for any help.

Previewed in browser and in normal preview mode. (Just clicking "preview from this slide).
Normal project -- not responsive.
And..I'm not worried. No need for wine. (Although I've never been known to refuse one if someone offers. )
Screenshots below. As you can see, the image is not set sa a button.
And, yes: I know there is a spelling error in the thought bubble. Just trying to get it to work first.
I think there may be a bug in the system, as I have noticed other weird things. (EG: The time indicators under "timeline" often disappear for no reason. I have to close out and re-lauch Captivate to get it back. (Clicking on "timeline" in Windows dropdown does nothing to correct the issue. Other things I've noticed is that the navigation works fine when I play the whole project through ONCE, but upon a second preview, all settings -- such as "jump to slide __" -- do not stick. When I go back in and re-enter all of the navigation slide commands, the same thing happens when I replay it. My client notices the same thing. Bizarre.)

New material specifi field not appearing in LSMW objects

Dear all,
Within the conversion process, we have to load "Z" specific fields whose values are stored in the MARC table but that are not appearing in the standard LSMW object 0020 - Material master. Is there a specific step or action to be taken (or object to be selected in LSMW) so these fields would appear in the structure ?
Thanks for your answer,
Cheers

Hi Olivier
Standard object 0020 gives fields only available in standard tables MARA , MARC , MBEW, MAKT . I too faced this problem for ML based fields in accounting & costing views ( as these fields are not in MBEW they are in CKMLHD). The said Z field if it does not exist in MARC it cannot be seen through std object. U need to do a saperate recording to upload this field. I dont see any other option to my knowledge.U can up load remaing fields through the std object 0020 & create a saperate recorded LSMW only for this Z field.
regards
prasad
reward if useful

Timed objects not appearing, selectively

Similar Messages

Maybe you are looking for