Timed out, server application never registered to receive message

Hello. So, It's been a while since I last used iMovie, and now I'm having a very difficult time of it sharing to anything or even saving a version to disk. It won't even save to Theater! Each time I do, it gives me the exact same cryptic message: ""timed out, server application never registered to receive message" - and that's even when saving to disc, and not saving to ANY exterior source.
Since I can't find any mention of this message on Google or Duck Duck Go, I am calling upon alla y'all. So, the details on my system:
Macbook Pro, 13-inch (early 2011)
2.3 GHz Intel Core i5
4 GB 1333 MHz DDR3
318 gigs of storage, and yeah, it's about 3.8 gigs left, even with an 500 gig external hard drive running concurrently..
Version of iMovie is 10.0.6.

I am experiencing the same issue and it's getting annoying. I can't logout or shutdown normally.
iMac, 24 inch, 2 GB RAM, 10.5.7, 500 GB drive with lotsa space left.
Here is the message in system.log when I try to logout and the dock stays as described above:
Jul 30 09:17:40 new-host loginwindow761: ERROR | WSActivateApp | SetFrontProcess({0, 1655188}) returned error -600. Unable to activate process.
Have tried the same fixes as above (repair disk, repair permissions, archive & install). No joy. Any ideas? Thanks!

Similar Messages

Timed Out Server

Hello,
 I have tried SP5, but I still have some problems and
 questions...........could someone pls answer these, so that I know if
 this is some known problem with the product, or some configuration
 issue, or if anyone has seen some similar problems.........
 Q:
 What does the following property mean, and what should a reasonable
 value be for it :
 --> ISSUE 31575: A new multicast property
 ("weblogic.cluster.multicastSendDelay") which handles
 the buffer overflow properties has been added.
 Q:
 What does the time-out in the ClusterManager represent, and is it some
 default value, or can it be configured ? Also, is it related to the
 Timed Out SErver error that I mention below?
 -->ISSUE 30924: Enhanced timeout in ClusterManager and fixed a problem
 with servers not shutting down.
 Q: What is written below is not clear to me....is it saying that now
 there should be a message of the type : "Creating RemoteMemberInfo for"
 + configdetails ??
 I have applied SP5, and also checked it with the weblogic.Admin utility,
 and no SP4 file is there anymore, but I am still getting the older
 "Joined cluster mycluster at address 224.0.0.1:7001"
 message.............
 -->ISSUE 32054:
 Improved log notification when a server is aware of other servers in the
 cluster. The string looks like: "Creating RemoteMemberInfo for" +
 configdetails. In
 general, when using WebLogic Server 4.0.X through 5.1.X, the message of
 "Joined cluster mycluster at address 224.0.0.1:7001", does not
 necessarily mean
 that there is anyone else in the cluster. In 4.5 you could tell when
 there was really another server in the cluster by the server to server
 RJVM messages when
 each node found the others. But, in 5.1 this became no longer possible.
 This change improves the log notification and solves this problem.
 Q: How does one turn on the debug flag with the IIS plug in ? Is it
 mentioned in the iisproxy.ini file ? I couldn't find anything like this
 in the admin docs for plug-in configuration ........
 -->ISSUE 28929: Added the ability to have Debug flags with
 NSAPI/ISAPI/ASAPI plug-ins. Now Debug flags can be turned on in the
 configuration file of the plug-in.
 PROBLEM:
 When both of the servers in the cluster are brought up, and they start
 receiving requests, the following happens for some time on one server,
 till which time apparently both share the load....
 Mo Aug 22 12:32:39 GMT+02:00 2000: <Cluster> memberPresent
 -68329250512188744
 40S134.28.77.101:[7001,7001,7002,7002,7001,-1]
 Mo Aug 22 12:32:46 GMT+02:00 2000: <Cluster> memberPresent
 -68329250512188744
 40S134.28.77.101:[7001,7001,7002,7002,7001,-1]
 Mo Aug 22 12:32:56 GMT+02:00 2000: <ServletContext-General> file:
 init
 Mo Aug 22 12:33:26 GMT+02:00 2000: <Cluster> Timed out server
 then the other server stops taking any load and all requests go to this
 server............However, if this servlet is brought down, the other
 takes over the load...........
 however, bringing up a new server in the cluster, or reviving the one
 brought down, the following happens :
 weblogic.utils.NestedError: Tried to update secondary, but it thought it
 was the primary - with nested exception:
 [weblogic.cluster.replication.BadStatusException: update found
 -1286423340868561093 but it is not the secondary]
 the member present messages appear again for some time, and then again
 there is the Timed Out Server message.......though all of this happens
 pretty randomly at this stage, but the problem is consistent...........
 If someone has any ideas, pls let me know.........
 environment:
 2 servers in a cluster with NT...........IIS proxy..........
 regards,
 farhat


Hello,
 I have tried SP5, but I still have some problems and
 questions...........could someone pls answer these, so that I know if
 this is some known problem with the product, or some configuration
 issue, or if anyone has seen some similar problems.........
 Q:
 What does the following property mean, and what should a reasonable
 value be for it :
 --> ISSUE 31575: A new multicast property
 ("weblogic.cluster.multicastSendDelay") which handles
 the buffer overflow properties has been added.
 Q:
 What does the time-out in the ClusterManager represent, and is it some
 default value, or can it be configured ? Also, is it related to the
 Timed Out SErver error that I mention below?
 -->ISSUE 30924: Enhanced timeout in ClusterManager and fixed a problem
 with servers not shutting down.
 Q: What is written below is not clear to me....is it saying that now
 there should be a message of the type : "Creating RemoteMemberInfo for"
 + configdetails ??
 I have applied SP5, and also checked it with the weblogic.Admin utility,
 and no SP4 file is there anymore, but I am still getting the older
 "Joined cluster mycluster at address 224.0.0.1:7001"
 message.............
 -->ISSUE 32054:
 Improved log notification when a server is aware of other servers in the
 cluster. The string looks like: "Creating RemoteMemberInfo for" +
 configdetails. In
 general, when using WebLogic Server 4.0.X through 5.1.X, the message of
 "Joined cluster mycluster at address 224.0.0.1:7001", does not
 necessarily mean
 that there is anyone else in the cluster. In 4.5 you could tell when
 there was really another server in the cluster by the server to server
 RJVM messages when
 each node found the others. But, in 5.1 this became no longer possible.
 This change improves the log notification and solves this problem.
 Q: How does one turn on the debug flag with the IIS plug in ? Is it
 mentioned in the iisproxy.ini file ? I couldn't find anything like this
 in the admin docs for plug-in configuration ........
 -->ISSUE 28929: Added the ability to have Debug flags with
 NSAPI/ISAPI/ASAPI plug-ins. Now Debug flags can be turned on in the
 configuration file of the plug-in.
 PROBLEM:
 When both of the servers in the cluster are brought up, and they start
 receiving requests, the following happens for some time on one server,
 till which time apparently both share the load....
 Mo Aug 22 12:32:39 GMT+02:00 2000: <Cluster> memberPresent
 -68329250512188744
 40S134.28.77.101:[7001,7001,7002,7002,7001,-1]
 Mo Aug 22 12:32:46 GMT+02:00 2000: <Cluster> memberPresent
 -68329250512188744
 40S134.28.77.101:[7001,7001,7002,7002,7001,-1]
 Mo Aug 22 12:32:56 GMT+02:00 2000: <ServletContext-General> file:
 init
 Mo Aug 22 12:33:26 GMT+02:00 2000: <Cluster> Timed out server
 then the other server stops taking any load and all requests go to this
 server............However, if this servlet is brought down, the other
 takes over the load...........
 however, bringing up a new server in the cluster, or reviving the one
 brought down, the following happens :
 weblogic.utils.NestedError: Tried to update secondary, but it thought it
 was the primary - with nested exception:
 [weblogic.cluster.replication.BadStatusException: update found
 -1286423340868561093 but it is not the secondary]
 the member present messages appear again for some time, and then again
 there is the Timed Out Server message.......though all of this happens
 pretty randomly at this stage, but the problem is consistent...........
 If someone has any ideas, pls let me know.........
 environment:
 2 servers in a cluster with NT...........IIS proxy..........
 regards,
 farhat

Registering iPod nano - Session timed-out even though already registered

Having purchased a new iPod nano, when connecting it to iTunes I received the screen to register the nano with the options to Never Register, Later or Continue. I chose Continue but received the message 'Your registration session timed-out'. I registered through apple.com but now every time I connect the iPod I get this same screen and always the same 'Your registration session timed-out' message. Can anyone help me get past this screen ?

Actually, I've got this working. I had already tried resetting my Nano (take a look at the ipod support page at http://www.apple.com/support/ipod/ and lookup how to reset your ipod ) before and nothing doing.
However, the other day, I resetted it again and now my Nano is working fine! I got the 'registration' page and I selected 'Never Register' (although I have already done so via the web site) and can now update my Nano properly. I wonder if I didn't reset it properly last time - I can't think why else it didn't work last time. Ah well, try resetting and see what happens.
iMac Intel Core 2 Duo 2.16 Ghz (20") Mac OS X (10.4.8)

'Request timed out' on Application Loader

I cannot upload my binary using Application loader. Error message is either 'request timed out' or 'connection lost' during the "Sending API usage to iTunes Connect". (Upload worked yesterday, my internet connection has not changed).

I Also have same prblem here in Dubai... Request time out. I bought this new iPad last Gitex but I can't install anything.
i am giving this iPad mini as a gift to my mother but I change my mind,, could someone help me sort this out??

What causes "Timed out server" in WL Cluster and a question about session in WL Cluster

 Hi.
 We are using Weblogic 5.1 with SP 8. We have been encountering a problem in our
 clustered environment. We setup our (clustered)environment to have 3 instances(WL1,
 WL2, WL3) of weblogic running in one box. When one instance, let say WL1, responds
 to a request(1st request for a session), the session is binded to that instance
 till the session is terminated/expired. Which means succeeding request for that
 session can only be served by WL1(we tried stopping WL1 but WL2 and WL3 wont accept
 the request--which only causes the page to time out). Shouldnt it behave in such
 a way that other instances can get serve the request(failover)?
 Also, occasionally we encounter "Time out server" in one of the instance of WL.
 When this happens, that instance no longer takes in requests. Would anyone know
 what causes "Time out server"? Does it only happen in clustered environment?
 Need some help ASAP.
 Tnx in adv.


 What do you have in front of WebLogic for Load Balancing?
 What are the IP addresses/hostnames of your three instances? What hostname are
 you using in your http requests? Is your DNS configured to do failover?
 Make sure that you have session replication turned on. See the edocs.bea.com.
 Mike Reiche
 "clstrproblem" <[email protected]> wrote:
 >
 >Hi.
 >
 >We are using Weblogic 5.1 with SP 8. We have been encountering a problem
 >in our
 >clustered environment. We setup our (clustered)environment to have 3
 >instances(WL1,
 >WL2, WL3) of weblogic running in one box. When one instance, let say
 >WL1, responds
 >to a request(1st request for a session), the session is binded to that
 >instance
 >till the session is terminated/expired. Which means succeeding request
 >for that
 >session can only be served by WL1(we tried stopping WL1 but WL2 and WL3
 >wont accept
 >the request--which only causes the page to time out). Shouldnt it behave
 >in such
 >a way that other instances can get serve the request(failover)?
 >
 >Also, occasionally we encounter "Time out server" in one of the instance
 >of WL.
 >When this happens, that instance no longer takes in requests. Would anyone
 >know
 >what causes "Time out server"? Does it only happen in clustered environment?
 >
 >
 >Need some help ASAP.
 >
 >Tnx in adv.
 >
 >
 >
 >
 >
 >
 >

My macbook pro's messages application won't send/receive messages.

I made a new account because it wouldn't let me log in on my old account and now it seems as if it's working but it won't send or receive ANY messages. This application used to work so I don't understand.

Hi,
I agree with Diane, we need to exclude the app as a whole or just you user settings.
Running Messages in a "test' Mac User Account will tell us that.
8:22 PM Wednesday; June 4, 2014
 iMac (Mavericks 10.9.x)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),

"iTunes could not connect to the iPhone because the device timed out." Why am I getting this message when connecting my iPhone 5 to my 27" iMac running OS X 10.8.5?

I have a new 27" iMac with the 3.4 Ghz processor. I cannot move any iTunes files to my iPhone 5 because of the message in the subject line. Any idea why?

Hey amyroseofclyde,
Thanks for the question. After reviewing your post, it sounds like the iPhone is not appearing in iTunes. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iOS: Device not recognized in iTunes for OS X - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Connection timed out, but diagnostics show I can connect OK. ***?

Problem: iTunes has recently crapped itself. I have no new software of changes to make. I am running the stock XP Firewall, and iTunes was checked fine. I unchecked and rechecked to no avail. I ran diagnostics and all seems well. I am using Symantec Endpoint Protection, but have been running that for years. I even made a new HOSTS file, but I still have no luck getting to the store. I actually want to conduct commerce here, but cannot. This seems to be a huge issue of late and I need your help.
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2008-07-08 13:19:45.

I don't have an answer, but I thought I'd back you up by saying that I've had exactly the same problem. I received the same diagnostic messages.
I have tried completely disabling Norton Firewall (where I had already allowed complete access for iTunes and anything that looked remotely related) and turned of the Windows Firewall without any luck. I could launch a basic browser and navigate to the iTunes website manually, but from within the iTunes app, I continue to receive the "unable to connect... connection timed out" message.
I also uninstalled and re-installed iTunes. This appears to have made the problem only worse in that now when I run the diagnostic, it returns the following:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iPhone activation server unsuccessful.
The network connection timed out.
iTunes has never successfully accessed iTunes store.
This is incredibly frustrating. I have done many searches for the problem and found several bits of advice: clearing the DNS cache, clearing history and cookies in IE, etc. I've tried all of these to no avail. I would like to now deauthorize the system iTunes is currently on and set it up on another system, but without a valid connection to iTunes I can't even successfully deauthorize the computer.
I've seen several other forum posts over the past couple of years regarding this problem. Seems like Apple could have, by now, consolidated the responses and provided a straightforward troubleshooting document.

Cannot connect to itunes store: connecton timed out

I just transferred my library from my old computer to my new one and then found that i couldnt connect to the store.
I have been looking for hours now on the solution to this problem on here and have done all suggestions please help me!
here are my diagnostics also my internet is working fine
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Compaq-Presario AY030AA-ABA CQ5320F
iTunes 10.0.1.22
QuickTime 7.6.8
FairPlay 1.9.16
Apple Application Support 1.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.2.0.47
Apple Mobile Device Driver 1.49.0.0
Bonjour 2.0.3.0 (214.3)
Gracenote SDK 1.7.1.420
Gracenote MusicID 1.7.1.78
Gracenote Submit 1.7.1.106
iTunes Serial Number 9321E38DF93E3444
Current user is not an administrator.
The current local date and time is 2010-10-06 21:00:16.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Video Display Information
NVIDIA , NVIDIA GeForce 6150SE nForce 430
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.0.1.22 is currently running.
iTunesHelper 10.0.1.22 is currently running.
Apple Mobile Device service 3.2.0.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {99F55DF7-8C43-464C-A8A9-FA3F847467CB}
Description: NVIDIA nForce 10/100 Mbps Ethernet
IP Address: 192.168.1.46
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Wed Oct 06 19:10:38 2010
Lease Expires: Thu Oct 07 19:10:38 2010
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
iTunes has never successfully accessed iTunes store.

by the way i HAVE enabled itunes in windows firewall for some reason it says i havent

'500 Connection timed out' Error in Sender SOAP Scenario

Hi mates,
I exposed o/b synch MI as a webservice. This webservice is received by a BPM and it triggers an IDOC generation program on R/3. BPM waits & collects the IDOCs and cosntructs the response from these IDOCs and returns it to the webservice caller.
I'm making the SOAP call from a client program and I get the correct response in some cases where the data requested is not huge...normally with in 30 sec.
But in some cases I get the error '500 Connection timed out' after 60 sec. The detailed message is as follows.
500 Connection timed out
Connection timed out (-5)
Error: -5
Version: 6040
Component: ICM
Date/Time: Thu Jun 15 17:06:10 2006
Module: icxxthr_mt.c
Line: 2551
Server: hcidx1_DX1_03
Detail: Connection to partner timed out after 60s
My BPM waits for 10 minutes and I set the parameter XI.Timeout to 600000 (i.e. 10 minutes) in module parameter table for the sender SOAP adapter as per the note 856597. And in SXMB_ADM, I set the parameter CHECK_FOR_ASYNC_RESPONSE_TIMEOUT of category SA_COMM to 600. In my client program, I set the timeout as 1 hour. All these config params are supposed to make sure that all the components involved wait for atleast 10 mins before they timeout.
But I get timeout after 60 sec. Whats wrong/missing?
I highly appreciate your inputs.
thx in adv
praveen

Hey Praveen,
I'm making the SOAP call from a client program and I get the correct response in some cases where the data requested is not huge...normally with in 30 sec.
But in some cases I get the error '500 Connection timed out' after 60 sec. The detailed message is as follows.
does this mean you are getting some response in some cases where u r payload is small , and if its large ur getting some timeout like this? Also is ur scenario Sync / Async?
Assuming i understood correctly , i came a similar situation but that has to do some thing with Paging file / memory issues when the files are too huge and no. of users are high please let me know if this is the case.
best regards
Vara
[PLEASE REWARD FOR POSTING]

Network Connection To Store Timed Out??? Advise Extremely Appreciated!

Hi everyone, I am/was thinking about buying an iPod Touch for myself and I thought I'd go ahead and get iTunes. I see everyone is having this problem, but I am in need of personal advise. Here are the diagnostics:
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ByteSpeed LLC BYTSPDPC
iTunes 8.0.2.20
QuickTime 7.5.5
FairPlay 1.1.11
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.2.7
Bonjour 1.0.5.11 (118.5)
iTunes Serial Number 93EC75DD8F622348
Current user is an administrator.
The current local date and time is 2008-12-02 20:40:21.
iTunes is not running in safe mode.
Video Display Information
Intel(R) G33/G31 Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {1E16CCA7-F65B-4791-B568-ECC7BF63CF8C}
Description: Intel(R) 82566DC-2 Gigabit Network Connection - Packet Scheduler Miniport
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Tue Dec 02 20:17:09 2008
Lease Expires: Wed Dec 03 20:17:09 2008
DNS Servers: 192.168.1.1
192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iPhone activation server unsuccessful.
The network connection timed out.
iTunes has never successfully accessed iTunes store.
** CD/DVD Drive Tests **
LowerFilters: Afc (1.0.0.2), PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.7.5),
D: HL-DT-ST DVDRAM GSA-H62N, Rev CL00
Drive is empty.
** iPod/iPhone Connectivity Tests **
iPodService 8.0.2.20 is currently running.
iTunesHelper 8.0.2.20 is currently running.
Apple Mobile Device service 2.12.33.0 is currently not running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.
Thanks =)

I have found that previously existing Norton suites (even after they have been successfully uninstalled) can come back from the dead and block certain network resources. I recently came across a Vista system that had just this happen after an iTunes 8 update. Running the Norton Removal Tool restored access to the iTunes music store.

Java.sql.SQLException: Io exception: Socket read timed out

Hello,
I've a interface RFC - JDBC - RFC.
When this interface is executing, i have the follow error in RuntimeWorkbench::
'Unable to execute statement for table or stored procedure. 'TABLAERR' (Structure 'STATEMENT') due to java.sql.SQLException: Io exception: Socket read timed out'
In SXMB_MONI do not see any message, only
' <SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry> '
this error don't occurs always, when and why i don't know..
I searched for information about this error and nothing found
why it is happens?
thank very much

HI,
This is not a problem in ur mapping or configuration.
This is a problem with JDBC connection. This is a common error, that generally comes when the DB server is receiving and processing numerous records. Connection time out or socket read time out.
First try this:
In ur JDBC adapter go to Advanced Tab Page and check Transaction Isolation Level as Serializable.
If still problem persists then take help of basis guys and increase the timeout for the connection, same thing can be asked from DB team.

Home wireless network keeps "timing out." Help!

I currently have an eMac with a wired connection to an AirPort Extreme base station that creates a wireless network in my home with Time Warner Road Runner. I also have an Airport Express that acts as a relay station.
For some reason lately, the wireless internet connection is S-L-O-W and often I can't load a page and get the message "network connection timed out, server may be busy." The wireless signal is excellent and I've restarted both the Base Station as well as the Express but no luck. I use a G4 PowerBook and my wife uses an iBook and the problem occurs on both
The wired connection works great.
Can anyone help me figure out what's going on? Thanks for any help.
Sunil
PowerBook G4 Mac OS X (10.4.7)

I'm running into a simiar situation with Time Warner Road Runner. I have 3 PCs with a wired connection to a linksys router that creates a wireless network for my MacBook.
For the first 4 days the wireless network worked great. I could access the internet from anywhere in the house on my MacBook. On the 5th day I couldn't connect to the internet on my MacBook. I've power cycled the cable modem and the router, updated the router firmware and even called Apple Care. No one has an answer. Like you, my wired connections work just fine. And the wireless signal is great. The MacBook can see the wireless network and get on it but cannot connect to the internet through it.
I believe it may be a DHCP lease renewal issue for the IP address. The MacBook doesn't show an IP address in its Network Configurations for the router. My network locations keep resetting their port priorities to bluetooth instead of airport and everytime I do a diagnostic I get a message that says "another program has changed your network configurations, click ok to continue". But I don't have any answers.
Maybe someone out there does?

BPF Operation Timed Out

Hello,
We are getting the following error message on our BPC 5.1 SP1 system when running a Business Process Flow (after selecting a BPF and defining members):
"The operation has timed-out"
The strange thing is that this message does not appear with user-id's that were created several months back, but with new ID's that were created recently. Users are being assigned to different teams and can view only certain entities.
Our environment consists of 2 web servers and 1 SQL server. Have you guys seen an error message such as this before?
Thanks,
Nikunj

Usually this is a problem with security setup for that appset or for that BPF,
Regards
Sorin Radulescu

2.2.1 download timed out

I have tried three times to download and install the iPod software update 2.2.1 and have been unsuccessful. Each time the software downloads and the download appears complete (the circle with the arrows disappears, the horizontal bar marches up to 277.7 MB then disappears, etc). But then nothing happens. I wait and I wait (one time it was more than 30 minutes) and the install is not initiated even though my iPod touch is still connected and appears as a device. Then, if I click another item in the left hand panel of iTunes, I get an error message that the server timed out. When I close the error message window, the download selection disappears from the left hand panel and the file is no where to be found. When I click "Update" again on the Device menu, the download starts again from the very beginning.
Any advice to help me resolve this issue will be greatly appreciated. Thanks
Jim

I have the same problem. My "update" did not successfully install, so now I'm stuck w/ my ipod touch showing the cable to iTunes icon, but iTunes doesn't recognize it. I've tried reinstalling itunes, reinstalling the drivers, and following several other posts without success. Has anyone been able to resolve this?
My config:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
LENOVO 2007WHC
iTunes 8.0.2.20
QuickTime 7.6
FairPlay 1.1.11
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.2.7
Bonjour 1.0.5.11 (118.5)
iTunes Serial Number C115045CBB25F167
Current user is an administrator.
The current local date and time is 2009-02-16 14:07:32.
iTunes is not running in safe mode.
Video Display Information
ATI Mobility Radeon X1300
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 8.0.2.20 is currently running.
iTunesHelper 8.0.2.20 is currently running.
Apple Mobile Device service 2.12.33.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Device Not Currently Connected:
iPod touch running firmware version 2.2
Serial Number: 1B7489KHW4T
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.

Timed out, server application never registered to receive message

Similar Messages

Maybe you are looking for