Timed Out using iPad
When using GoodReader App on the iPAd to access our Mac server from another location I get timed out, any suggestions?
I would suggest....
1. Going to Settings>Safari, and then deleting cookies and data
2. Then going to your home screen. Double click the home button, a shelf should appear at the bottom of the screen. - Hold your finger on the first app on the bottom shelf until it starts to shake. Once they are shaking, tap the Red circle with the white minus sign in it in the upper left corner of each app on the shelf until they are all closed. Note - this will NOT delete the apps, only close those running in the background.
3. Restart the device (hold sleep/wake button until you see a red "slide to power off" slider. Power down iPad. Then when screen is black, turn back on normally.
4. Try again.
5. If issue persists, if you have a cellular model, you'll probably want to try using cellular data instead of wifi to connect, turn Wifi to OFF in settings>wifi, then try again.
6. After this go back to settings>wifi and turn it back on
7. If using cellular didnt work, try again, now that wifi has been turned off then back on.
8. if still doesnt work, reset network settings, (will need to reenter you wifi passcode if you do this). You can reset these by going to Settings>General>Reset>Reset network settings. This will restart your iPad so dont be alarmed.
8. Try again.
Similar Messages
-
Tnsping timed out using dg4odbc from Oracle to MYSQL through ODBC
Hi,
I encountered problem when trying to connect from Oracle to MYSQL using dg4odbc, hope you can shed some light
Oracle database is 11.1.0.7 on SUSE Linux 64-bit.
Since the application which runs on MYSQL DB only offers ODBC driver on Windows platform, so I installed the 32-bit ODBC driver (from ServiceNow) on a 32-bit windows server (driver download from http://wiki.service-now.com/index.php?title=ODBC_Driver) .
created system DSN: MYSQLDEV, The DSN connection works fine. I then installed Oracle 11.2.0.1 gateway for ODBC 32-bit on the same windows server, the following configurations were done:
On 32-bit Windows server:
in gatewayHome\hs\admin
initMYSQLDEV.ora:
# HS init parameters
HS_FDS_CONNECT_INFO = MYSQLDEV
HS_FDS_TRACE_LEVEL = DEBUG
in gatewayHome\network\admin:
listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = abcdes.sda.sdva.com)(PORT = 1521))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=MYSQLDEV)
(ORACLE_HOME=C:\product\11.2.0\tg_1)
(PROGRAM=dg4odbc)
ADR_BASE_LISTENER = C:\product\11.2.0\tg_1
stop and started listener on windows server and check listener status
C:\product\11.2.0\tg_1\bin>lsnrctl status listener
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-MAR-2012 21:42:08
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=abcdes.sda.sdva.com)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 29-MAR-2012 21:11:36
Uptime 0 days 0 hr. 30 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\product\11.2.0\tg_1\network\admin\listener.ora
Listener Log File c:\product\11.2.0\tg_1\diag\tnslsnr\abcdes\list
ener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=abcdes.sda.sdva.com)(PORT=1521)))
Services Summary...
Service "MYSQLDEV" has 1 instance(s).
Instance "MYSQLDEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
On Linux server where Oracle DB resides.
Added the following tns entry "jelly" on the Linux server ORACLE_HOME/network/admin:
jelly =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)
(HOST=abcdes.sda.sdva.com)
(PORT=1521))
(CONNECT_DATA=(SID=MYSQLDEV))(HS=OK)
tnsping from Linux server (64-bit) failed with timeout error:
tnsping jelly
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 29-MAR-2012 21:12:38
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP) (HOST=abcdes.sda.sdva.com) (PORT=1521)) (CONNECT_DATA=(SID=MYSQLDEV))(HS=OK))
TNS-12535: TNS:operation timed out
tnsping from Windows server works fine: (added same tnsnames entry on windows server for testing purpose only)
C:\product\11.2.0\tg_1\bin>tnsping jelly
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-MAR-2
012 21:45:20
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\product\11.2.0\tg_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=abcdes.sda.sdva.com)(PORT=1521)) (CONNECT_DATA=(SID=MYSQLDEV)) (HS=OK))
OK (20 msec)
if listener is not listening to the service, then the tnsping on the windows server should fail as well.
I don't know why only the tnsping from Linux failed, is it due to the 32-bit ODBC uncompatibility with 64-bit oracle server? or my configuration problem?
Of course, when I created the DB link from oracle, the connection failed with
create database link mysqldev connect to xxxx identified by "xxxxx" using 'jelly';
Database link created.
select * from tab1;
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from MYSQLDEV
Thanks for your help,Hi Mike,
This is part of the tnsping.trc file which contains the error. IP address is in the tnsnames entry with this tnsping.
nsopen: opening transport...
nttcon: entry
nttcon: toc = 1
nttcnp: entry
nttcnp: creating a socket.
nttcnp: exit
nttcni: entry
nttcni: Tcp conn timeout = 0 (ms)
nttcni: trying to connect to socket 5.
ntt2err: entry
ntt2err: soc 5 error - operation=1, ntresnt[0]=505, ntresnt[1]=110, ntresnt[2]=0
ntt2err: exit
nttcni: exit
nttcon: exit
nserror: entry
nserror: nsres: id=0, op=65, ns=12535, ns2=12560; nt[0]=505, nt[1]=110, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsopen: unable to open transport
nsiocancel: entry
nsiofrrg: entry
nsiofrrg: cur = 53b9f8
nsbfr: entry
nsbaddfl: entry
nsbaddfl: normal exit
nsbfr: normal exit
nsiofrrg: exit
nsiocancel: exit
nsvntx_dei: entry
nsvntx_dei: exit
nsopenfree_nsntx: nlhthdel from mplx_ht_nsgbu, ctx=53a7e0 nsntx=53ade0
nsiocancel: entry
nsiofrrg: entry
nsiofrrg: exit
nsiocancel: exit
nsmfr: entry
nsmfr: 2712 bytes at 0x53ade0
nsmfr: normal exit
nsmfr: entry
nsmfr: 1528 bytes at 0x53a7e0
nsmfr: normal exit
nsopen: error exit
nscall: error exit
nscall: entry
nscall: connecting...
nsclose: entry
nsclose: normal exit
nladget: entry
nladget: exit
nsmfr: entry
nsmfr: 264 bytes at 0x528900
nsmfr: normal exit
nladtrm: entry
nladtrm: exit
nscall: error exit
nlse_term_audit: entry
nlse_term_audit: exit
Thanks, -
I am being timed out even when composing an email in .Mac which seems to be part of .Mac security. Can I increase my "timed in" quota? What happens to the email I am in the middle of composing which did not get sent.
No. You can't increase the "time" of your session.
Plan ahead. Compose your reply or messages in another app (TextEdit or even Mail) and use copy/paste to speed up your session.
Your session time is only based on "activity". When you go "idle" it times out. -
Every time I try to search for an app it says "session timed out." iPad
Every time I try to search for an app it says "session timed out."
iPadTry This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons.. -
I have an itunes account on my PC and have downloaded Kindle and iBook with no problem, but when I try and use that acct id on my iPad the system says I cannot access the store. However, when I try to create a new id the system comes up and tells me that I am from Canada, which is always nice to know in case I ever forget, and when I acknowledge that screen, it immediately tells me the session has timed out. What am I doing wrong? Willingly admit I am not at all knowledgable in the Apple world. Thanks for any help you can give..
Carmell-
When I've had a similar problem, it was because I was accessing the iTunes store from a device I hadn't used before, such as when I upgraded from an iPad 1 to the iPad 2. It was a little confusing to me until I figured it out.
All I had to do was use the ID of my existing account and play along with the iTunes store. As I recall, it asked for my password twice, and the security code from the back of my credit card. After that, downloads proceeded as before.
Fred -
I can't connect my ipad air to my computer. It comes up with the message 'connection has timed out'. I use windows vista. Please help, I want my music catalogue on my ipad. Thanks
Have you updated your iTunes? iOS7 requires at least iTunes 11.
-
When using citrix thru safari on my iPad , how do I keep from getting timed out and having to log in again after not using it for awhile ?
I know nothing about this app but I just did a very quick search on the app support forum for Citrix and saw something about enabling a setting called Caffiene. Have you tried that? It overrides the auto lock from what I saw in the discussion.
I'm just not sure why the iPad would sleep at all if it the Auto Lock is set to never. The only other things that I could think to try is to restart the iPad and then see if the Auto Lock setting works properly or maybe quit all apps and then try again. That really shouldn't matter but there might be an app that is overriding the auto lock for some reason. Or even reset the device - hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears. The iPad system might just need a kick in the butt.
Edit - after rereading your post I see that you are going through Safari. The suggestion that I found was for the Citrix app. I assume the Caffiene setting is not available through Safari. -
trying to unlock sons disabled ipad mini cant use find iphone not 3g and wont connect internet when disabled syncs to itunes whenusing never synced method
asks if i want to update and restore download starts and then message syas network connection timed out. any ideas on another method i can update after unlocked and restore all his stuff from icloudTry disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
My Ipad 2 is timing out while using it. Battery is charged and all apps are closed.
My Ipad 2 is timing out while I'm using it and I can't figure out why. I've made sure that all of the apps are shut down. The screen goes blank and thepassword screen shows up a few seconds later.
Your apps aren't just crashing, or you would be taken back to the home screens and not the screen where your passcode have to be entered. Seems like something is corrupt. Have you rebooted the iPad by holding down on the sleep and home buttons at the same time until the Apple logo appears on the screen? I don't think that's likely to fix the problem but it will not hurt anything to try that first.
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again. -
I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3. I cannot find my photos and videos. I tried a restore, but after 3 hours, it's timing out. Pardon my ignorance on asking this question; but is there a way to find my photos? I do nto care about anythign else.
Here are the steps I though I took this morning:
Backup iPad
Connect to iTunes and downlaod newest version of iTunes and then newest iOS
restart Vista Laptop
upgrade to newest iOS
I knew somethign was wrong when it took about 6 hours to upgrade the iPad
at the end it errored with this message error (-50), but the upgrade worked
I was expecting to see all my photos but didn't see them
I have tried a restore to a back up 2 times. The first time took 3 hours and just sort of timed out - it kept saying that there was an hour to go
I tried it again 2 hours ago and same message.
They are very valuable to me and so now I am panicking
Your help is much appreciatedHi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario -
How do I fix this error: The iPad cannot be synced. The device has timed out?
Hello out there! Would someone be so kind as to point me in the right direction in fixing my little promblem? I can't seem to figure out how to get my syncing process to work properly. I've updated all my apps and I have even done the steps to configure. I've chosen to use "my iPad" back up feature and then the next step is to connect to iTunes and sync everything. It will do so and then it will say in the window box of iTunes "Finishing Sync". A minute or so later it will feature an error box presenting the statement: "The iPad, "my iPad" cannont sync. The device has timed out." Where do I go from here? Thanks to any with some good solutions. LJ
Oops! Shall I add that I have recently updated my iPad's iOS software to iOS 5.1.1 and this is when my troubles began. :-)
-
I have been trying to download ios5 using my windows compute Windows 7. I connected Ipad and opened Itunes etc. Three times I have sat there for up to an hour downloding the program and it gets to the end (100%) sometimes it even processses the file and then I get a message saying the connection has timed out and to try again. I am on a wireless connection and it is so frustrating. I have the latest version of itunes. Any suggestions?
Try temporarily disabling your firewall and anti-virus software then try the download again.
Stedman -
ITunes could not connect to the iPad "Micah's iPad Air" because the device timed out.
After using my ipad air for the last week, I plugged it in for the first time to back up some videos. I get this message: iTunes could not connect to the iPad “Micah's iPad Air” because the device timed out. Any ideas?
Eject your iPad if you haven't already done so. Quit iTunes and restart your computer. Reboot your iPad and then try again, use another USB port on your computer, of you have another free port available,
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Hi I m not able to update my iPad 2 to iOS 5. I am using windows OS, when I Connect my IPad to laptop, I tunes detects and ask for updating to iOS 5. But after some time it shows a error message saying network connection timed out and try after some time. This error message occurs every time I update. Please help me to update my iPad 2
ThanksClose your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes, sync and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I've been trying to update my ipad all day, and it keeps stopping with an error that reads, "There was a problem downloading the software for the iPad 'Becki's iPad.' The network connection timed out." My question is, how can I prevent this from happening again? My ipad is currently running on 4.3.3 software version.
beckab wrote:
... The network connection timed out." My question is, how can I prevent this from happening again? ...
If using windows...
Temporarily disable your firewall and antivirus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/
Maybe you are looking for
-
Can't update WRT54GS firmware!
I have a WRT54GS v5.1 with firmware 1.50.5 When I try to upgrade to firmware version 1.52.0 I browse, select the .bin file and click upgrade. The loading bar reaches about 3/4 full, then starts again and reaches about 1/4. Then I get "The connection
-
the screen shows up on the computer as: in order to continue, fix the errors shown below. But it does not show any errors. Please Help.
-
I want to configure my compact rio through cross over cable but i can't
I m trying to connect Crio 9014 to my computer using crossover cable. but it give me error and the cards connceted through it can't be see by on MAX. Give me some helpful suggestions
-
How can I calculate total path length of a Binary Search Tree?
I have been trying to learn binary search trees, but I can't figure out a way to calculate the total path length and the number of leaves in a BST. I will utilize a linked list for the nodes in the tree. I will be using an innerClass for the nodes; e
-
Problem when opening Workbook , error "This file is not in a recognizable format".
Hi Team, When i am trying to execute one work book. I am getting above worming message Can someone help me about this message and solution to this issue. Thanks in advance. Regards Raju M