Timed out while sending ... message may be send more than once
Hi,
I regular have complaints from some clients receiving my emails 10 -15 times in their mailbox.
When checking the maillog I always see : timed out while sending ... message may be send more than once. See below
Problem can happen at any time, even when there is just 1 person connected to the server, so I rule out overload.
95% of mails send arrive without problem.
When looking the dns mx info of these clients I am having problem with, all have multiple (round-robin ?) mx-hosts (eg mx.mailprotect.be).
Is someone else having these problems ?
gr
Fonny
Nov 20 14:05:05 osxserver postfix/smtp[33385]: 3846CBE9FFC7: conversation with monitor.estrel.com[62.154.155.69] timed out while sending end of data -- message may be sent more than once
Nov 20 14:15:48 osxserver postfix/smtp[33385]: 3846CBE9FFC7: to=<[email protected]>, relay=mx-30.startplus.de[62.154.155.70]:25, delay=1826, delays=486/0.01/716/623, dsn=4.4.2, status=deferred (conversation with mx-30.startplus.de[62.154.155.70] timed out while sending end of data -- message may be sent more than once)
Nov 20 14:15:48 osxserver postfix/smtp[33385]: 3846CBE9FFC7: to=<[email protected]>, relay=mx-30.startplus.de[62.154.155.70]:25, delay=1826, delays=486/0.01/716/623, dsn=4.4.2, status=deferred (conversation with mx-30.startplus.de[62.154.155.70] timed out while sending end of data -- message may be sent more than once)
Nov 20 14:27:06 osxserver postfix/smtp[34737]: 6F586BEA0F09: lost connection with mx1.hotmail.com[65.55.92.136] while sending end of data -- message may be sent more than once
It means that Cyrus IMAP is not responding or ready to deliver mail (at least temporarily). Most likely reason is that there are too many connections/users.
Similar Messages
-
Message may be sent more than once
Hi,
When I use mailq, I can read the following error in many emails:
008B354E529F 7265 Tue Jun 30 10:08:19 [email protected]
(delivery temporarily suspended: conversation with server.domain[/var/imap/socket/lmtp] timed out while sending end of data -- message may be sent more than once)
[email protected]
What is happen?
Thanks for all.
Message was edited by: jonflasIt means that Cyrus IMAP is not responding or ready to deliver mail (at least temporarily). Most likely reason is that there are too many connections/users.
-
Hello. My iPhone 4s when recieving message plays the tone more than once. How to stop that?
It plays the tone more than once and it's not playing the tone fully. It plays like it is "stuck". Like CDs play when they are scratched. How can I stop that?
Pause and off are the same thing. This is how you stop the music.
iPhone User Guide (For iOS 5.0 Software) -
I'm using Entourage 2008 v 12.3.5 and lost ability to SEND. Tried many small email tests. Server continues to leave time out message. "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic." Comcast tells me server is not down all other network activity is fine. WHat's up with this?
Starting earlier today, this also became my problem - can receive but not send in Entourage. The account settings are correct in Entourage - I even created a new account. My Mac running 10.7.5 won't read the original Office : MAC 2008 disk, so I can't do a fix or reinstall from the disk.
This is not an issue if I log onto the Comcast site.
And so, I started using Mail but, unlike Entourage, Mail won't import my Entourage info.
Argh... :-( -
I get a message that my network connection has timed out while trying to update my iPhone on iTunes. Has anyone else had that problem and if so what solutions have you found? I was told to turn off my firewall and/or virus protection while updating but am nervous about doing that for obvious reasons. I'm also disgusted with Apple not providing free tech support.
See this article about the ports that have to be open during the update process. iTunes has to contact Apple during the download. iTunes for Windows: Troubleshooting security software issues
-
Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
Regards
JerelHi, thank you for your replies, I found out few things about my servlet, and its portability
and i have few questions, although i marked this topic as answered i guess its ok to post
I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
of the modified files to the user for them to download the modified files.
What i am using to get the tempdir i will paste
File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
System.out.println(baseurl);
baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
links to the user for download ?
and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
And i want to create unique directory for each request made to the servlet , so file names dont clash.
one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
Reply A.S.A.P. please..
Thanks and regards,
Mihir Pandya -
The operation timed out while writing (kCFStreamStatusOpening)
iMessage cant send files. This is what it says in the file transfer window. "the operation timed out while writing (kCFStreamStatusOpening)" Help
Hi,
In the past in the Mountain Lion (Messages 7.x.x) I have sent quite large photos via the iMessages account of several GBs of data.
I have yet to do the same in Messages 8 (Mavericks) but don't expect for this to have changed.
I do know that the Messages 8 app tends to zip some files before sending when dragged from other apps such as a Browser or iPhoto.
I have sent a Keynote file to my iPhone in Messages 7.x.x but this was only 334 kb
What sort of files are you trying to send ?
If not zipped already it may pay to try this first.
7:21 pm Sunday; November 3, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Hi,
I created a simple plugin and since i wanted to use Early Binding i added Xrm.cs file to my solution.After i tried registering the plugin (using the Plugin Registration Tool) the plugin does not gets registered and i get the below mentioned Exception.
Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this
operation may have been a portion of a longer timeout.
Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Xrm.Sdk.IOrganizationService.Update(Entity entity)
at Microsoft.Xrm.Sdk.Client.OrganizationServiceProxy.UpdateCore(Entity entity)
at Microsoft.Crm.Tools.PluginRegistration.RegistrationHelper.UpdateAssembly(CrmOrganization org, String pathToAssembly, CrmPluginAssembly assembly, PluginType[] type)
at Microsoft.Crm.Tools.PluginRegistration.PluginRegistrationForm.btnRegister_Click(Object sender, EventArgs e)
Inner Exception: System.TimeoutException: The HTTP request to 'https://demoorg172.api.crm.dynamics.com/XRMServices/2011/Organization.svc' has exceeded the allotted timeout of 00:01:59.9430000. The time allotted to this operation may have been a portion of a
longer timeout.
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
Inner Exception: System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
And to my Surprise after i remove the Xrm.cs file from my solution the Plugin got registered!
Not understanding what exactly is the issue.
Any Suggestions are highly appreciated.
Thanks,
Shradha
Hello Shardha,
I really appreciate that you have faced this issue.This is really very strange issue and basically it occurs because of big size of your early bound class and slow internet
connection.
I would strictly recommend you to reduce the file size of your early bound class and then register.By default early bound class is created for all the entities which are
present in CRM(System entities as well custom entities).Such kind of early bound classes takes lots of time to register on server and hence timeout exception comes.
There is some standard define to reduce the size of early bound class.Please follow the link to get rid from big size of early bound class.
Create a new C# class library project in Visual Studio called SvcUtilFilter.
In the project, add references to the following:
CrmSvcUtil.exe(from sdk) This exe has the interface we will implement.
Microsoft.Xrm.Sdk.dll (found in the CRM SDK).
System.Runtime.Serialization.
Add the following class to the project:
using System;
using System.Collections.Generic;
using System.Xml.Linq;
using Microsoft.Crm.Services.Utility;
using Microsoft.Xrm.Sdk.Metadata;
namespace SvcUtilFilter
/// <summary>
/// CodeWriterFilter for CrmSvcUtil that reads list of entities from an xml file to
/// determine whether or not the entity class should be generated.
/// </summary>
public class CodeWriterFilter : ICodeWriterFilterService
//list of entity names to generate classes for.
private HashSet<string> _validEntities = new HashSet<string>();
//reference to the default service.
private ICodeWriterFilterService _defaultService = null;
/// <summary>
/// constructor
/// </summary>
/// <param name="defaultService">default
implementation</param>
public CodeWriterFilter( ICodeWriterFilterService defaultService )
this._defaultService = defaultService;
LoadFilterData();
/// <summary>
/// loads the entity filter data from the filter.xml file
/// </summary>
private void LoadFilterData()
XElement xml = XElement.Load("filter.xml");
XElement entitiesElement = xml.Element("entities");
foreach (XElement entityElement in entitiesElement.Elements("entity"))
_validEntities.Add(entityElement.Value.ToLowerInvariant());
/// <summary>
/// /Use filter entity list to determine if the entity class should be generated.
/// </summary>
public bool GenerateEntity(EntityMetadata entityMetadata, IServiceProvider services)
return (_validEntities.Contains(entityMetadata.LogicalName.ToLowerInvariant()));
//All other methods just use default implementation:
public bool GenerateAttribute(AttributeMetadata attributeMetadata, IServiceProvider services)
return _defaultService.GenerateAttribute(attributeMetadata, services);
public bool GenerateOption(OptionMetadata optionMetadata, IServiceProvider services)
return _defaultService.GenerateOption(optionMetadata, services);
public bool GenerateOptionSet(OptionSetMetadataBase optionSetMetadata, IServiceProvider services)
return _defaultService.GenerateOptionSet(optionSetMetadata, services);
public bool GenerateRelationship(RelationshipMetadataBase relationshipMetadata, EntityMetadata otherEntityMetadata, IServiceProviderservices)
return _defaultService.GenerateRelationship(relationshipMetadata, otherEntityMetadata, services);
public bool GenerateServiceContext(IServiceProvider services)
return _defaultService.GenerateServiceContext(services);
This class implements the ICodeWriterFilterService interface. This interface is used by the class generation
utility to determine which entities, attrributes, etc. should actually be generated. The interface is very simple and just has seven methods that are passed metadata info and return a boolean indicating whether or not the metadata should be included
in the generated code file.
For now I just want to be able to determine which entities are generated, so in the constructor I read from an XML
file (filter.xml) that holds the list of entities to generate and put the list in a Hashset. The format of the xml is this:
<filter>
<entities>
<entity>systemuser</entity>
<entity>team</entity>
<entity>role</entity>
<entity>businessunit</entity>
</entities>
</filter>
Take a look at the methods in the class. In the GenerateEntity method, we can simply check the EntityMetadata parameter
against our list of valid entities and return true if it's an entity that we want to generate.
For all of the other methods we want to just do whatever the default implementation of the utility is. Notice
how the constructor of the class accepts a defaultService parameter. We can just save a reference to this default service and use it whenever we want to stick with the default behavior. All of the other methods in the class just call the default
service.
To use our extension when running the utility, we just have to make sure the compiled DLL and the filter.xml file
are in the same folder as CrmSvcUtil.exe, and set the /codewriterfilter command-line argument when running the utility (as described in the SDK):
crmsvcutil.exe /url:http://<server>/<org>/XrmServices/2011/Organization.svc /out:sdk.cs /namespace:<namespace> /codewriterfilter:SvcUtilFilter.CodeWriterFilter,SvcUtilFilter
/username:[email protected] /password:xxxx
That's it! You now have a generated sdk.cs file that is only a few hundred kilobytes instead of 5MB.
One final note: There is actually a lot more you can do with extensions to the code generation utility.
For example: if you return true in the GenerateOptionSet method, it will actually generated Enums for each CRM picklist (which it doesn't normally do by default).
Also, the source code for this SvcUtilFilter example can be found here.
Use at your own risk, no warranties, etc. etc.
Please mark as a answer if this post is useful to you. -
While on vacation in Canada in July I started having trouble sending more than one pix at a time to other users. I don't recall having this problem before. Is there a limit on the number of pictures you can send via text? I wonder if I messed up some settings while I was in Canada. I had things set so that I could not receive phone calls so I wouldn't get charged. Could I have messed up text / multimedia settings as well?
We want your phone working just as well now as it did before your trip, sngbrd9. Are you trying to send the pictures to other Apple users using iMessage or are they being sent through MMS/picture messaging? Are you able to send pictures one at a time to those same contacts without an error? Did you change any settings in your camera to have HDR now instead of a slightly lower resolution with a smaller file size?
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport -
Request timed out while waiting for response!!
Hi All,
My scenario is PROXY to SOAP. I am getting below error while posting to WEBSERVICE.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- XML Validation Inbound Channel Response
-->
<ns1:stackTrace xmlns:ns1="http://xml.apache.org/axis/">Failed to deliver inbound WS message, code=503 and reason=Request timed out while waiting for response. at com.sonicsw.net.http.ws.WSHttpProtocolHandler$HttpInBrokerHandler.invoke(WSHttpProtocolHandler.java:833) at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32) at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118) at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83) at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:453) at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281) at com.sonicsw.net.http.ws.WSHttpProtocolHandler.sendToSOAPStack(WSHttpProtocolHandler.java:630) at com.sonicsw.net.http.ws.WSHttpProtocolHandler.dispatch(WSHttpProtocolHandler.java:537) at com.sonicsw.net.http.ws.WSHttpProtocolHandler.servicePost(WSHttpProtocolHandler.java:284) at com.sonicsw.net.http.ws.WSHttpProtocolHandler.service(WSHttpProtocolHandler.java:609) at com.sonicsw.net.http.HttpProtocolHandler.handle(HttpProtocolHandler.java:471) at progress.message.net.http.server.HttpConnectionHandler.handle(HttpConnectionHandler.java:170) at progress.message.net.https.server.SonicHttpsConnection.service(SonicHttpsConnection.java:156) at org.mortbay.http.HttpConnection.handleNext(HttpConnection.java:981) at org.mortbay.http.HttpConnection.handle(HttpConnection.java:831) at progress.message.net.https.server.SonicHttpsServer.handleConnection(SonicHttpsServer.java:449) at progress.message.net.https.server.SonicHttpsServer.handle(SonicHttpsServer.java:364) at org.mortbay.util.ThreadPool$PoolThread.run(ThreadPool.java:534)</ns1:stackTrace>
Any Idea ? Do I need to change anything in my SOAP Channel or BAsis should change the Time Parameter?
Thanks,
Pushkar PatelHi,
>>>>>>>Request timed out while waiting for response.
See the below link, it might be helpful to you for timed out issue.
[Link1|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?quicklink=index&overridelayout=true]
Regards,
Rajesh -
Client Timed Out While Answering Challenge HELP please!
ok, so i just added a WPA password to our airport extreem so my neighbor would stop using it. this worked, and for a second it seemed to be running good. now though when im on using bootcamp, running counter strike every time i try to join a server this error message comes up "Client Timed Out While Answering Challenge", and i have no clue why and its really ticking me off. The internet works fine on the windows side, and counter strike worked ok before i set the WPA passoword except real slow because of my neighbor using it. but no this error message is very annoying and if anyone knows how to get rid of it please help.
Close itunes then
Check your internet settings.
Control Panel – Internet Options – Advanced
Check SSL 3.0 and TLS 1.0
Uncheck “Check for server certificate revocation (requires restart)”
Click Apply
Click Okay
Open itunes and try again -
So, I'm busily responding to emails, etc. etc. and, as I say, after 5 emails are sent in quick succession, I get some sort of message saying I may not send more than 5 messages in 30 minutes ... !!! How can I get rid of this limitation? Because, what happens is I then save the emails I'm writing as drafts -- but I don't always remember they are sitting in the drafts folder and am horrified when I go check a few days later and there are my email replies waiting to be sent.
Talk to your email provider.
-
Ever since I updated my iphone 4 to 5.1.1, I am not able to send more than one picture at a time in a text message. Does anyone know how to fix this?
Yes, I know the photos stored on the device... But which app are you accessing the photos with? Which app do you want to be able to highlight more than one pic at a time in?
There are literally thosands of apps that access the iOS Photo Library - which one(s) are you using? -
am having trouble for the first time trying to redeem a gift card. Everything same on computer, OS, and internet connection. have been able to redeem other cards. this time am getting "SESSION HAS TIMED OUT" while trying to redeem card. have contacted apple and checked out all their suggestion iE:( must be your connection. typed in code wrong, too old version of itunes, etc) anything but why would a gift card code bee tied to a specific vetrsion of ITUNES. Rediculous!! there has to be others out there that have an older version if itune than i have. has anyone ever had the error "SESSION HAS TIMED OUT" and if so was it corrected?? any information other than apples {change password and give us lots of personal info they probably have) would be appreciated..
Hello,
As far as I can see, that Verizon Jet Pack wireless Modem uses WPA2 to connect.
The Router might complicate things right now.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed. -
Javax.transaction.SystemException: Timed out while in 'Logging' state!!!!
Hello, we have an OracleWeblogic 10.3.2 running on a Solaris OS.
In this AppServer we have a FullStack J2EE Application executing distributed transactions that involve 3 manageable resources:
TxDatasource (EJB),
NonTxDatasource with enableTwoPhaseCommit and
JMS
Some of the transactions are timing out while in 'Logging' state and I just cant figure out what the root cause is. As a defensive action I lowered the JTA Timeout seconds because I noticed the 'Logging' phase was taking too long and then timing out. Idea here was not to have too many threads hanging in Logging state and therefore use the JTA Timeout to overcome this problem and minimize impact.
Below, I'm posting a few exceptions thrown in applicaiton log. Any help is very appreciated.
####<Aug 12, 2011 11:40:11 AM EDT> <Error> <EJB> <brzfxap1> <FefxServer> <[ACTIVE] ExecuteThread: '175' for queue: 'weblogic.kernel.Default (self-tuning)'> <JG47515> <> <> <1313163611120> <BEA-010026> <Exception occurred during commit of transaction Name=[EJB com.citicorp.fx.credit.CreditServiceBean.askCreditQuery(com.citicorp.fx.credit.data.CreditQueryRequestData)],Xid=BEA1-7DB913B4CB2B36D47CB7(1248714554),Status=Rolled back. [Reason=javax.transaction.SystemException: Timed out while in 'Logging' state],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=82,seconds left=60,XAServerResourceInfo[TWOraDS_fefx]=(ServerResourceInfo[TWOraDS_fefx]=(state=rolledback,assigned=FefxServer),xar=TWOraDS,re-Registered = false),XAServerResourceInfo[WLStore_fefx_FefxFileStore]=(ServerResourceInfo[WLStore_fefx_FefxFileStore]=(state=rolledback,assigned=FefxServer),xar=WLStore_fefx_FefxFileStore1032009487,re-Registered = false),SCInfo[fefx+FefxServer]=(state=rolledback),properties=({weblogic.transaction.name=[EJB com.citicorp.fx.credit.CreditServiceBean.askCreditQuery(com.citicorp.fx.credit.data.CreditQueryRequestData)]}),local properties=({weblogic.jdbc.jta.TWOraDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+, XAResources={WLStore_fefx_FefxFileStore, TWOraDS_fefx, WLStore_fefx__WLS_FefxServer, weblogic.jdbc.wrapper.JTSXAResourceImpl, WSATGatewayRM_FefxServer_fefx},NonXAResources={})],CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+): weblogic.transaction.RollbackException: Timed out while in 'Logging' state
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1848)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:339)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:621)
at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:60)
at weblogic.ejb.container.internal.BaseRemoteObject.postInvokeTxRetry(BaseRemoteObject.java:441)
at com.citicorp.fx.credit.CreditService_6w08fk_EOImpl.askCreditQuery(CreditService_6w08fk_EOImpl.java:75)
at com.citicorp.fx.client.creditquery.QueryProcessor.handleEvent(QueryProcessor.java:77)
at org.jac.creation.ProcessorAction.handleEvent(ProcessorAction.java:64)
at org.jac.runtime.AbstractAction.handleSecuredEvent(AbstractAction.java:73)
at org.jac.runtime.StateImpl.handleEvent(StateImpl.java:66)
at org.jac.runtime.ControllerImpl.handleEvent(ControllerImpl.java:123)
at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:55)
at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:78)
at org.jac.creation.JacImpl.handleEvent(JacImpl.java:53)
at org.jac.runtime.JACExecutor.handleEvent(JACExecutor.java:111)
at org.jac.runtime.JACExecutor.handleEventBySessionID(JACExecutor.java:103)
at org.jac.http.ControllerFilter.doFilter(ControllerFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.citicorp.fx.util.compression.CompressionFilter.doFilter(CompressionFilter.java:189)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.citicorp.security.web.WebLogicSiteminderAuthenticationFilter.doFilter(WebLogicSiteminderAuthenticationFilter.java:65)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: Timed out while in 'Logging' state
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1797)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1609)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1885)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1519)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
... 2 more
.>
####<Aug 12, 2011 11:40:11 AM EDT> <Error> <EJB> <brzfxap1> <FefxServer> <[ACTIVE] ExecuteThread: '154' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1313163611119> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-7DBB13B4CB2B36D47CB7(977835896),Status=Rolled back. [Reason=javax.transaction.SystemException: Timed out while in 'Logging' state],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=60,seconds left=60,XAServerResourceInfo[WLStore_fefx_FefxFileStore]=(ServerResourceInfo[WLStore_fefx_FefxFileStore]=(state=rolledback,assigned=FefxServer),xar=WLStore_fefx_FefxFileStore1032009487,re-Registered = false),XAServerResourceInfo[TWOraDS_fefx]=(ServerResourceInfo[TWOraDS_fefx]=(state=rolledback,assigned=FefxServer),xar=TWOraDS,re-Registered = false),SCInfo[fefx+FefxServer]=(state=rolledback),local properties=({weblogic.jdbc.jta.TWOraDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+, XAResources={WLStore_fefx_FefxFileStore, TWOraDS_fefx, WLStore_fefx__WLS_FefxServer, weblogic.jdbc.wrapper.JTSXAResourceImpl, WSATGatewayRM_FefxServer_fefx},NonXAResources={})],CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+): weblogic.transaction.RollbackException: Timed out while in 'Logging' state
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1848)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:339)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:500)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4585)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4271)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3747)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5096)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: Timed out while in 'Logging' state
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1797)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1609)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1885)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1519)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
... 3 more
.>
This is the stack trace of the thread that hangs while waiting for the lock to write in the transaction file:
"[ACTIVE] ExecuteThread: '64' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=3 tid=0x000000010dea3000 nid=0x1e2 in Object.wait() [0xfffffffda03ff000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at weblogic.transaction.internal.ServerTransactionImpl.log(ServerTransactionImpl.java:2005)
- locked <0xfffffffe64964b30> (a weblogic.transaction.internal.ServerTransactionImpl)
at weblogic.transaction.internal.ServerTransactionImpl.globalPrepare(ServerTransactionImpl.java:2320)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:273)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:621)
at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:60)
at weblogic.ejb.container.internal.BaseRemoteObject.postInvokeTxRetry(BaseRemoteObject.java:441)
at com.citicorp.fx.credit.CreditService_6w08fk_EOImpl.askCreditQuery(CreditService_6w08fk_EOImpl.java:75)
at com.citicorp.fx.client.creditquery.QueryProcessor.handleEvent(QueryProcessor.java:77)
at org.jac.creation.ProcessorAction.handleEvent(ProcessorAction.java:64)
at org.jac.runtime.AbstractAction.handleSecuredEvent(AbstractAction.java:73)
at org.jac.runtime.StateImpl.handleEvent(StateImpl.java:66)
at org.jac.runtime.ControllerImpl.handleEvent(ControllerImpl.java:123)
at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:55)
- locked <0xfffffffe0860e618> (a org.jac.session.SessionImpl)
at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:78)
- locked <0xfffffffe0860e618> (a org.jac.session.SessionImpl)
at org.jac.creation.JacImpl.handleEvent(JacImpl.java:53)
at org.jac.runtime.JACExecutor.handleEvent(JACExecutor.java:111)
at org.jac.runtime.JACExecutor.handleEventBySessionID(JACExecutor.java:103)
at org.jac.http.ControllerFilter.doFilter(ControllerFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.citicorp.fx.util.compression.CompressionFilter.doFilter(CompressionFilter.java:189)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.citicorp.security.web.WebLogicSiteminderAuthenticationFilter.doFilter(WebLogicSiteminderAuthenticationFilter.java:65)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Edited by: user8727499 on Aug 12, 2011 11:57 AMHello, we have an OracleWeblogic 10.3.2 running on a Solaris OS.
In this AppServer we have a FullStack J2EE Application executing distributed transactions that involve 3 manageable resources:
TxDatasource (EJB),
NonTxDatasource with enableTwoPhaseCommit and
JMS
Some of the transactions are timing out while in 'Logging' state and I just cant figure out what the root cause is. As a defensive action I lowered the JTA Timeout seconds because I noticed the 'Logging' phase was taking too long and then timing out. Idea here was not to have too many threads hanging in Logging state and therefore use the JTA Timeout to overcome this problem and minimize impact.
Below, I'm posting a few exceptions thrown in applicaiton log. Any help is very appreciated.
####<Aug 12, 2011 11:40:11 AM EDT> <Error> <EJB> <brzfxap1> <FefxServer> <[ACTIVE] ExecuteThread: '175' for queue: 'weblogic.kernel.Default (self-tuning)'> <JG47515> <> <> <1313163611120> <BEA-010026> <Exception occurred during commit of transaction Name=[EJB com.citicorp.fx.credit.CreditServiceBean.askCreditQuery(com.citicorp.fx.credit.data.CreditQueryRequestData)],Xid=BEA1-7DB913B4CB2B36D47CB7(1248714554),Status=Rolled back. [Reason=javax.transaction.SystemException: Timed out while in 'Logging' state],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=82,seconds left=60,XAServerResourceInfo[TWOraDS_fefx]=(ServerResourceInfo[TWOraDS_fefx]=(state=rolledback,assigned=FefxServer),xar=TWOraDS,re-Registered = false),XAServerResourceInfo[WLStore_fefx_FefxFileStore]=(ServerResourceInfo[WLStore_fefx_FefxFileStore]=(state=rolledback,assigned=FefxServer),xar=WLStore_fefx_FefxFileStore1032009487,re-Registered = false),SCInfo[fefx+FefxServer]=(state=rolledback),properties=({weblogic.transaction.name=[EJB com.citicorp.fx.credit.CreditServiceBean.askCreditQuery(com.citicorp.fx.credit.data.CreditQueryRequestData)]}),local properties=({weblogic.jdbc.jta.TWOraDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+, XAResources={WLStore_fefx_FefxFileStore, TWOraDS_fefx, WLStore_fefx__WLS_FefxServer, weblogic.jdbc.wrapper.JTSXAResourceImpl, WSATGatewayRM_FefxServer_fefx},NonXAResources={})],CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+): weblogic.transaction.RollbackException: Timed out while in 'Logging' state
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1848)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:339)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:621)
at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:60)
at weblogic.ejb.container.internal.BaseRemoteObject.postInvokeTxRetry(BaseRemoteObject.java:441)
at com.citicorp.fx.credit.CreditService_6w08fk_EOImpl.askCreditQuery(CreditService_6w08fk_EOImpl.java:75)
at com.citicorp.fx.client.creditquery.QueryProcessor.handleEvent(QueryProcessor.java:77)
at org.jac.creation.ProcessorAction.handleEvent(ProcessorAction.java:64)
at org.jac.runtime.AbstractAction.handleSecuredEvent(AbstractAction.java:73)
at org.jac.runtime.StateImpl.handleEvent(StateImpl.java:66)
at org.jac.runtime.ControllerImpl.handleEvent(ControllerImpl.java:123)
at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:55)
at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:78)
at org.jac.creation.JacImpl.handleEvent(JacImpl.java:53)
at org.jac.runtime.JACExecutor.handleEvent(JACExecutor.java:111)
at org.jac.runtime.JACExecutor.handleEventBySessionID(JACExecutor.java:103)
at org.jac.http.ControllerFilter.doFilter(ControllerFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.citicorp.fx.util.compression.CompressionFilter.doFilter(CompressionFilter.java:189)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.citicorp.security.web.WebLogicSiteminderAuthenticationFilter.doFilter(WebLogicSiteminderAuthenticationFilter.java:65)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: Timed out while in 'Logging' state
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1797)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1609)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1885)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1519)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
... 2 more
.>
####<Aug 12, 2011 11:40:11 AM EDT> <Error> <EJB> <brzfxap1> <FefxServer> <[ACTIVE] ExecuteThread: '154' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1313163611119> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-7DBB13B4CB2B36D47CB7(977835896),Status=Rolled back. [Reason=javax.transaction.SystemException: Timed out while in 'Logging' state],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=60,seconds left=60,XAServerResourceInfo[WLStore_fefx_FefxFileStore]=(ServerResourceInfo[WLStore_fefx_FefxFileStore]=(state=rolledback,assigned=FefxServer),xar=WLStore_fefx_FefxFileStore1032009487,re-Registered = false),XAServerResourceInfo[TWOraDS_fefx]=(ServerResourceInfo[TWOraDS_fefx]=(state=rolledback,assigned=FefxServer),xar=TWOraDS,re-Registered = false),SCInfo[fefx+FefxServer]=(state=rolledback),local properties=({weblogic.jdbc.jta.TWOraDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+, XAResources={WLStore_fefx_FefxFileStore, TWOraDS_fefx, WLStore_fefx__WLS_FefxServer, weblogic.jdbc.wrapper.JTSXAResourceImpl, WSATGatewayRM_FefxServer_fefx},NonXAResources={})],CoordinatorURL=FefxServer+169.193.4.91:8107+fefx+t3+): weblogic.transaction.RollbackException: Timed out while in 'Logging' state
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1848)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:339)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:500)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4585)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4271)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3747)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5096)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: Timed out while in 'Logging' state
at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1797)
at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1609)
at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1885)
at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1519)
at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
... 3 more
.>
This is the stack trace of the thread that hangs while waiting for the lock to write in the transaction file:
"[ACTIVE] ExecuteThread: '64' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=3 tid=0x000000010dea3000 nid=0x1e2 in Object.wait() [0xfffffffda03ff000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at weblogic.transaction.internal.ServerTransactionImpl.log(ServerTransactionImpl.java:2005)
- locked <0xfffffffe64964b30> (a weblogic.transaction.internal.ServerTransactionImpl)
at weblogic.transaction.internal.ServerTransactionImpl.globalPrepare(ServerTransactionImpl.java:2320)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:273)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:621)
at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:60)
at weblogic.ejb.container.internal.BaseRemoteObject.postInvokeTxRetry(BaseRemoteObject.java:441)
at com.citicorp.fx.credit.CreditService_6w08fk_EOImpl.askCreditQuery(CreditService_6w08fk_EOImpl.java:75)
at com.citicorp.fx.client.creditquery.QueryProcessor.handleEvent(QueryProcessor.java:77)
at org.jac.creation.ProcessorAction.handleEvent(ProcessorAction.java:64)
at org.jac.runtime.AbstractAction.handleSecuredEvent(AbstractAction.java:73)
at org.jac.runtime.StateImpl.handleEvent(StateImpl.java:66)
at org.jac.runtime.ControllerImpl.handleEvent(ControllerImpl.java:123)
at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:55)
- locked <0xfffffffe0860e618> (a org.jac.session.SessionImpl)
at org.jac.session.SessionImpl.handleEvent(SessionImpl.java:78)
- locked <0xfffffffe0860e618> (a org.jac.session.SessionImpl)
at org.jac.creation.JacImpl.handleEvent(JacImpl.java:53)
at org.jac.runtime.JACExecutor.handleEvent(JACExecutor.java:111)
at org.jac.runtime.JACExecutor.handleEventBySessionID(JACExecutor.java:103)
at org.jac.http.ControllerFilter.doFilter(ControllerFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.citicorp.fx.util.compression.CompressionFilter.doFilter(CompressionFilter.java:189)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.citicorp.security.web.WebLogicSiteminderAuthenticationFilter.doFilter(WebLogicSiteminderAuthenticationFilter.java:65)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Edited by: user8727499 on Aug 12, 2011 11:57 AM
Maybe you are looking for
-
Macbook won't turn on, won't charge either (no green/amber light)
So I was cleaning my keyboard today (just with water and a towel) and after cleaning, the screen shut off but my macbook was still turned on (could hear the fans). It wouldn't respond to anything and I tried a hard shut down but this did not work eit
-
What causes this? Video or Audio freeze on plays?
I have a new HP Pavilion 23 AMD 6 with 3.6 processor. During video plays the video and audio will freeze but the audio is there too with the last input blurrping out like a loud F**T. That's the best I can explain it. It is only for second or so bu
-
Empty trash stuck in infinite loop....
I just upgraded to Mtn Lion and I have a hard drive with time machine back up from a leopard machine, I wanted to delete that, and use the drive with Mtn lion, I put the backups folder into trash and tried to empty it, it is stuck in an infinite loop
-
THE HOME BUTTOM OF MY IPHONE 4 IS NOT WORKING AND I'M NOT COVERED WITH THE APPLE CARE SINCE THIS EXPIRED, WHERE DO I TAKE MY PHONE TO BE FIXED AND HOW MUCH IS THAT GOING TO COST?
-
How to control change request creation for particular IBase Component?
Dear Experts, Can anybody suggest , how to control change request creation for particular IBase Component? We have implemented ChaRM which is integrated with SAP ECC & SAP BI. ChaRM is not integrated with SAP Solution Manager. End Users are creating